Using the great tutorial/howto for self-signed SSL certs to use with
courier MTA and courier IMAP MTA worked just great! Only problem is
that exim doesn't work with the certs. I'm using exim4. Does the howto
at
http://www.rellits.com/rellits/exim.html only work for exim3?? What
am I doing wrong?
My exim file is pasted in below my signature line...
Tommy Butler
tommy@??? <
mailto:tommy@atrixnet.com>
$ cat /var/lib/exim4/config.autogenerated
#########
# WARNING WARNING WARNING
# WARNING WARNING WARNING
# WARNING WARNING WARNING
# WARNING WARNING WARNING
# WARNING WARNING WARNING
# this file is generated dynamically from the files in
# CONFDIR/conf.d/ or /etc/exim4/exim4.conf.template respectively and
# /etc/exim4/update-exim4.conf.conf
# Any changes you make here will be lost.
# See /usr/share/doc/exim4-base/README.Debian.gz and update-exim4.conf(8)
# for instructions of customization.
# WARNING WARNING WARNING
# WARNING WARNING WARNING
# WARNING WARNING WARNING
# WARNING WARNING WARNING
# WARNING WARNING WARNING
#########
exim_path = /usr/sbin/exim4
CONFDIR = /etc/exim4
domainlist local_domains =
@:cityairlines.net:localhost:cityairlines.net:casino-airlines.com:casinoairlines.net
domainlist relay_to_domains = *
hostlist relay_from_hosts = 127.0.0.1 : ::::1 :
qualify_domain = cityairlines.net
.ifndef DCreadhost
DCreadhost =
.endif
.ifndef DCsmarthost
DCsmarthost =
.endif
local_interfaces = 127.0.0.1:206.123.72.157
LOCAL_DELIVERY=maildir_home
gecos_pattern = ^([^,:]*)
gecos_name = $1
DCconfig_internet = 1
acl_smtp_rcpt = acl_check_rcpt
acl_smtp_data = acl_check_data
.ifdef MESSAGE_SIZE_LIMIT
message_size_limit = MESSAGE_SIZE_LIMIT
.endif
.ifndef DC_minimaldns
host_lookup = *
.endif
rfc1413_hosts = *
rfc1413_query_timeout = 30s
ignore_bounce_errors_after = 2d
timeout_frozen_after = 7d
freeze_tell = postmaster
.ifndef SPOOLDIR
SPOOLDIR = /var/spool/exim4
.endif
spool_directory = SPOOLDIR
trusted_users = uucp
begin acl
acl_whitelist_local_deny:
accept hosts = ${if exists{CONFDIR/local_host_whitelist}\
{CONFDIR/local_host_whitelist}\
{}}
accept senders = ${if exists{CONFDIR/local_sender_whitelist}\
{CONFDIR/local_sender_whitelist}\
{}}
acl_check_rcpt:
accept hosts = :
deny domains = +local_domains
local_parts = ^[.] : ^.*[@%!/|]
message = restricted characters in address
deny domains = !+local_domains
local_parts = ^[./|] : ^.*[@%!] : ^.*/\\.\\./
message = restricted characters in address
accept local_parts = postmaster
domains = +local_domains
deny message = sender envelope address $sender_address is locally
blacklisted here. If you think this is wrong, get in touch with postmaster
!acl = acl_whitelist_local_deny
senders = ${if exists{CONFDIR/local_sender_blacklist}\
{CONFDIR/local_sender_blacklist}\
{}}
deny message = sender IP address $sender_host_address is locally
blacklisted here. If you think this is wrong, get in touch with postmaster
!acl = acl_whitelist_local_deny
hosts = ${if exists{CONFDIR/local_host_blacklist}\
{CONFDIR/local_host_blacklist}\
{}}
accept domains = +local_domains
endpass
message = unknown user
verify = recipient
accept domains = +relay_to_domains
endpass
message = unrouteable address
verify = recipient
accept hosts = +relay_from_hosts
accept authenticated = *
deny message = relay not permitted
acl_check_data:
warn condition = ${if !def:h_Message-ID: {1}}
hosts = +relay_from_hosts
message = Message-ID: <E$message_id@$primary_hostname>
accept
begin routers
hubbed_hosts:
debug_print = "R: hubbed_hosts for $domain"
driver = manualroute
domains = "${if exists{CONFDIR/hubbed_hosts}\
{partial-lsearch;CONFDIR/hubbed_hosts}\
fail}"
route_data = ${lookup{$domain}partial-lsearch{CONFDIR/hubbed_hosts}}
transport = remote_smtp
.ifdef DCconfig_internet
dnslookup_relay_to_domains:
debug_print = "R: dnslookup_relay_to_domains for $local_part@$domain"
driver = dnslookup
domains = ! +local_domains : +relay_to_domains
transport = remote_smtp
same_domain_copy_routing = yes
no_more
dnslookup:
debug_print = "R: dnslookup for $local_part@$domain"
driver = dnslookup
domains = ! +local_domains
transport = remote_smtp
same_domain_copy_routing = yes
ignore_target_hosts = 0.0.0.0 : 127.0.0.0/8 : 192.168.0.0/16 :\
172.16.0.0/12 : 10.0.0.0/8 : 169.254.0.0/16
no_more
.endif
.ifdef DCconfig_local
nonlocal:
debug_print = "R: nonlocal for $local_part@$domain"
driver = redirect
domains = ! +local_domains
allow_fail
data = :fail: Mailing to remote domains not supported
no_more
.endif
.ifdef DCconfig_smarthost DCconfig_satellite
smarthost:
debug_print = "R: smarthost for $local_part@$domain"
driver = manualroute
domains = ! +local_domains
transport = remote_smtp_smarthost
route_list = * DCsmarthost byname
host_find_failed = defer
same_domain_copy_routing = yes
no_more
.endif
real_local:
debug_print = "R: real_local for $local_part@$domain"
driver = accept
domains = +local_domains
local_part_prefix = real-
check_local_user
transport = LOCAL_DELIVERY
system_aliases:
debug_print = "R: system_aliases for $local_part@$domain"
driver = redirect
domains = +local_domains
allow_fail
allow_defer
data = ${lookup{$local_part}lsearch{/etc/aliases}}
file_transport = address_file
.ifdef DCconfig_satellite
hub_user:
debug_print = "R: hub_user for $local_part@$domain"
driver = redirect
domains = +local_domains
data = ${local_part}@DCreadhost
check_local_user
.endif
userforward:
debug_print = "R: userforward for $local_part@$domain"
driver = redirect
domains = +local_domains
check_local_user
file = $home/.forward
no_verify
no_expn
check_ancestor
allow_filter
directory_transport = address_directory
file_transport = address_file
pipe_transport = address_pipe
reply_transport = address_reply
skip_syntax_errors
syntax_errors_to = real-$local_part@$domain
syntax_errors_text = \
This is an automatically generated message. An error has\n\
been found in your .forward file. Details of the error are\n\
reported below. While this error persists, you will receive\n\
a copy of this message for every message that is addressed\n\
to you. If your .forward file is a filter file, or if it is\n\
a non-filter file containing no valid forwarding addresses,\n\
a copy of each incoming message will be put in your normal\n\
mailbox. If a non-filter file contains at least one valid\n\
forwarding address, forwarding to the valid addresses will\n\
happen, and those will be the only deliveries that occur.
procmail:
debug_print = "R: procmail for $local_part@$domain"
driver = accept
domains = +local_domains
check_local_user
transport = procmail_pipe
require_files = ${local_part}:\
${if exists{/etc/procmailrc}\
{/etc/procmailrc}{${home}/.procmailrc}}:\
+/usr/bin/procmail
no_verify
no_expn
maildrop:
debug_print = "R: maildrop for $local_part@$domain"
driver = accept
domains = +local_domains
check_local_user
transport = maildrop_pipe
require_files = ${local_part}:${home}/.mailfilter:+/usr/bin/maildrop
no_verify
no_expn
local_user:
debug_print = "R: local_user for $local_part@$domain"
driver = accept
domains = +local_domains
check_local_user
local_parts = ! root
transport = LOCAL_DELIVERY
mail4root:
debug_print = "R: mail4root for $local_part@$domain"
driver = redirect
domains = +local_domains
data = /var/mail/mail
file_transport = address_file
local_parts = root
user = mail
group = mail
begin transports
address_file:
debug_print = "T: address_file for $local_part@$domain"
driver = appendfile
delivery_date_add
envelope_to_add
return_path_add
address_pipe:
debug_print = "T: address_pipe for $local_part@$domain"
driver = pipe
return_fail_output
address_reply:
debug_print = "T: autoreply for $local_part@$domain"
driver = autoreply
mail_spool:
debug_print = "T: appendfile for $local_part@$domain"
driver = appendfile
file = /var/mail/$local_part
delivery_date_add
envelope_to_add
return_path_add
group = mail
mode = 0660
mode_fail_narrower = false
maildir_home:
debug_print = "T: maildir_home for $local_part@$domain"
driver = appendfile
directory = $home/Maildir
delivery_date_add
envelope_to_add
return_path_add
maildir_format
mode = 0600
mode_fail_narrower = false
maildrop_pipe:
debug_print = "T: maildrop_pipe for $local_part@$domain"
driver = pipe
path = "/bin:/usr/bin:/usr/local/bin"
command = "/usr/bin/maildrop"
return_path_add
delivery_date_add
envelope_to_add
procmail_pipe:
debug_print = "T: procmail_pipe for $local_part@$domain"
driver = pipe
path = "/bin:/usr/bin:/usr/local/bin"
command = "/usr/bin/procmail"
return_path_add
delivery_date_add
envelope_to_add
remote_smtp:
debug_print = "T: remote_smtp for $local_part@$domain"
driver = smtp
remote_smtp_smarthost:
debug_print = "T: remote_smtp_smarthost for $local_part@$domain"
driver = smtp
hosts_try_auth = ${if exists {CONFDIR/passwd.client}{DCsmarthost}{}}
tls_tempfail_tryclear = false
address_directory:
debug_print = "T: address_directory for $local_part@$domain"
driver = appendfile
envelope_to_add = true
return_path_add = true
check_string = ""
escape_string = ""
maildir_format
begin retry
* * F,2h,15m; G,16h,1h,1.5; F,4d,6h
begin rewrite
*@+local_domains ${lookup{${local_part}}lsearch{/etc/email-addresses}\
{$value}fail} Ffrs
*@+local_domains "${if exists {CONFDIR/email-addresses}\
{${lookup{${local_part}}lsearch{CONFDIR/email-addresses}\
{$value}fail}}fail}" Ffrs
begin authenticators
cram_md5:
driver = cram_md5
public_name = CRAM-MD5
client_name =
${extract{1}{:}{${lookup{$host}lsearch*{CONFDIR/passwd.client}{$value}fail}}}
client_secret =
${extract{2}{:}{${lookup{$host}lsearch*{CONFDIR/passwd.client}{$value}fail}}}
plain:
driver = plaintext
public_name = PLAIN
client_send = "${if !eq{$tls_cipher}{}{\
^${extract{1}{::}\
{${lookup{$host}lsearch*{CONFDIR/passwd.client}{$value}fail}}}\
^${extract{2}{::}\
{${lookup{$host}lsearch*{CONFDIR/passwd.client}{$value}fail}}}\
}fail}"
login:
driver = plaintext
public_name = LOGIN
client_send = "${if !eq{$tls_cipher}{}{}fail}\
: ${extract{1}{::}\
{${lookup{$host}lsearch*{CONFDIR/passwd.client}{$value}fail}}} \
: ${extract{2}{::}\
{${lookup{$host}lsearch*{CONFDIR/passwd.client}{$value}fail}}}"
