Hi,
I've set up exim4 on a new Ubuntu 22.04 server. Sending and receiving
of mail works. But when sending a mail, I can see in the log that for
the first 30 seconds or more, exim stalls and does nothing. Then there
is an error about 'TLS error on connection (recv)', and after the error
is printed, the email is delivered immediately. That seems strange?
Here is an example from the logs:
2023-09-12 13:49:27 1qg1tV-00022N-0Q <= memmenlauer@??? H=port-213-160-25-97.static.as20676.net ([192.168.33.110]) [213.160.25.97] P=esmtpsa
X=TLS1.3:ECDHE_X25519__RSA_PSS_RSAE_SHA256__AES_128_GCM:128 CV=no A=plain_server:memmenlauer S=1273 id=8a03346e-e407-f3eb-1579-06887a9093b3@???
2023-09-12 13:51:38 1qg1tV-00022N-0Q H=gmail-smtp-in.l.google.com [2a00:1450:400c:c09::1b]: SMTP timeout after initial connection: Connection timed out
2023-09-12 13:51:38 1qg1tV-00022N-0Q H=gmail-smtp-in.l.google.com [64.233.166.27] TLS error on connection (recv): The TLS connection was non-properly terminated.
2023-09-12 13:51:39 1qg1tV-00022N-0Q => emmenlau@??? R=dnslookup T=remote_smtp H=gmail-smtp-in.l.google.com [64.233.166.27] TFO
X=TLS1.3:ECDHE_X25519__ECDSA_SECP256R1_SHA256__AES_256_GCM:256 CV=yes DN="CN=mx.google.com" K C="250 2.0.0 OK
f7-20020a0560001b0700b00317f73eb3c5si1441824wrz.435 - gsmtp"
Does that mean anything to anyone? Attached my config (from Ubuntu
auto-generated from split configs).
Best regards,
Mario
--
Mario Emmenlauer Tel: +49-176-23463809
Balanstr. 43 mailto: mario * emmenlauer.de
81669 Muenchen http://www.emmenlauer.de
#########
# WARNING WARNING WARNING
# WARNING WARNING WARNING
# WARNING WARNING WARNING
# WARNING WARNING WARNING
# WARNING WARNING WARNING
# This file was generated dynamically from
# split config files in the /etc/exim4/conf.d/ directory.
# The config files are supplemented with package installation/configuration
# settings managed by debconf. This data is stored in
# /etc/exim4/update-exim4.conf.conf
# Any changes you make here will be lost.
# See /usr/share/doc/exim4-base/README.Debian.gz and update-exim4.conf(8)
# for instructions of customization.
# WARNING WARNING WARNING
# WARNING WARNING WARNING
# WARNING WARNING WARNING
# WARNING WARNING WARNING
# WARNING WARNING WARNING
#########
MAIN_TLS_ENABLE=yes
MAIN_TLS_CERTIFICATE=/etc/letsencrypt/live/biodataanalysis.de/cert.pem
MAIN_TLS_PRIVATEKEY=/etc/letsencrypt/live/biodataanalysis.de/privkey.pem
MESSAGE_SIZE_LIMIT=32M
IGNORE_SMTP_LINE_LENGTH_LIMIT=1
DKIM_CANON = relaxed
DKIM_DOMAIN = ${sender_address_domain}
DKIM_KEY_FILE = /etc/exim4/dkimkeys/atlas.email.dkim.privkey
DKIM_PRIVATE_KEY = ${if exists{DKIM_KEY_FILE}{DKIM_KEY_FILE}{0}}
DKIM_SELECTOR = email
exim_path = /usr/sbin/exim4
.ifndef CONFDIR
CONFDIR = /etc/exim4
.endif
UPEX4CmacrosUPEX4C = 1
##############################################
# the following macro definitions were created
# dynamically by /usr/sbin/update-exim4.conf
.ifndef MAIN_LOCAL_INTERFACES
MAIN_LOCAL_INTERFACES=<; 0.0.0.0.25 ; 0.0.0.0.465 ; 0.0.0.0.587 ; 0.0.0.0.22465 ; ::0.25 ; ::0.465 ; ::0.587 ; ::0.22465
.endif
.ifndef MAIN_PACKAGE_VERSION
MAIN_PACKAGE_VERSION=4.95-4ubuntu2.2
.endif
.ifndef MAIN_LOCAL_DOMAINS
MAIN_LOCAL_DOMAINS=@:localhost:biodataanalysis.de:biodataanalysis.org:gitlab.biodataanalysis.de:screeningbee.org:beewm.org:ibrain2.org:ibrain3.org
.endif
.ifndef MAIN_RELAY_TO_DOMAINS
MAIN_RELAY_TO_DOMAINS=
.endif
.ifndef ETC_MAILNAME
ETC_MAILNAME=biodataanalysis.de
.endif
.ifndef LOCAL_DELIVERY
LOCAL_DELIVERY=maildir_home
.endif
.ifndef MAIN_RELAY_NETS
MAIN_RELAY_NETS=: 127.0.0.1 : ::::1
.endif
.ifndef DCreadhost
DCreadhost=
.endif
.ifndef DCsmarthost
DCsmarthost=
.endif
.ifndef DC_eximconfig_configtype
DC_eximconfig_configtype=internet
.endif
.ifndef DCconfig_internet
DCconfig_internet=1
.endif
##############################################
domainlist local_domains = MAIN_LOCAL_DOMAINS:dsearch;/etc/exim4/maildomains
domainlist relay_to_domains = MAIN_RELAY_TO_DOMAINS
hostlist relay_from_hosts = MAIN_RELAY_NETS
.ifndef MAIN_PRIMARY_HOSTNAME_AS_QUALIFY_DOMAIN
.ifndef MAIN_QUALIFY_DOMAIN
qualify_domain = ETC_MAILNAME
.else
qualify_domain = MAIN_QUALIFY_DOMAIN
.endif
.endif
.ifdef MAIN_LOCAL_INTERFACES
local_interfaces = MAIN_LOCAL_INTERFACES
.endif
.ifndef LOCAL_DELIVERY
LOCAL_DELIVERY=mail_spool
.endif
gecos_pattern = ^([^,:]*)
gecos_name = $1
.ifndef MAIN_LOG_SELECTOR
MAIN_LOG_SELECTOR = +smtp_protocol_error +smtp_syntax_error +tls_certificate_verified +tls_peerdn
.endif
.ifndef MAIN_ACL_CHECK_MAIL
MAIN_ACL_CHECK_MAIL = acl_check_mail
.endif
acl_smtp_mail = MAIN_ACL_CHECK_MAIL
.ifndef MAIN_ACL_CHECK_RCPT
MAIN_ACL_CHECK_RCPT = acl_check_rcpt
.endif
acl_smtp_rcpt = MAIN_ACL_CHECK_RCPT
.ifndef MAIN_ACL_CHECK_DATA
MAIN_ACL_CHECK_DATA = acl_check_data
.endif
acl_smtp_data = MAIN_ACL_CHECK_DATA
.ifdef MESSAGE_SIZE_LIMIT
message_size_limit = MESSAGE_SIZE_LIMIT
.endif
.ifdef MAIN_ALLOW_DOMAIN_LITERALS
allow_domain_literals
.endif
.ifndef DC_minimaldns
.ifndef MAIN_HOST_LOOKUP
MAIN_HOST_LOOKUP = *
.endif
host_lookup = MAIN_HOST_LOOKUP
.endif
dns_dnssec_ok = 1
.ifdef MAIN_HARDCODE_PRIMARY_HOSTNAME
primary_hostname = MAIN_HARDCODE_PRIMARY_HOSTNAME
.endif
prdr_enable = true
.ifdef MAIN_SMTP_ACCEPT_MAX_NOMAIL_HOSTS
smtp_accept_max_nonmail_hosts = MAIN_SMTP_ACCEPT_MAX_NOMAIL_HOSTS
.endif
.ifndef MAIN_FORCE_SENDER
local_from_check = false
local_sender_retain = true
untrusted_set_sender = *
.endif
.ifndef MAIN_IGNORE_BOUNCE_ERRORS_AFTER
MAIN_IGNORE_BOUNCE_ERRORS_AFTER = 2d
.endif
ignore_bounce_errors_after = MAIN_IGNORE_BOUNCE_ERRORS_AFTER
.ifndef MAIN_TIMEOUT_FROZEN_AFTER
MAIN_TIMEOUT_FROZEN_AFTER = 7d
.endif
timeout_frozen_after = MAIN_TIMEOUT_FROZEN_AFTER
.ifndef MAIN_FREEZE_TELL
MAIN_FREEZE_TELL = postmaster
.endif
freeze_tell = MAIN_FREEZE_TELL
.ifndef SPOOLDIR
SPOOLDIR = /var/spool/exim4
.endif
spool_directory = SPOOLDIR
.ifndef MAIN_TRUSTED_USERS
MAIN_TRUSTED_USERS = uucp
.endif
trusted_users = MAIN_TRUSTED_USERS
.ifdef MAIN_TRUSTED_GROUPS
trusted_groups = MAIN_TRUSTED_GROUPS
.endif
.ifdef MAIN_KEEP_ENVIRONMENT
keep_environment = MAIN_KEEP_ENVIRONMENT
.else
keep_environment =
.endif
.ifdef MAIN_ADD_ENVIRONMENT
add_environment = MAIN_ADD_ENVIRONMENT
.endif
.ifdef _OPT_MAIN_SMTPUTF8_ADVERTISE_HOSTS
.ifndef MAIN_SMTPUTF8_ADVERTISE_HOSTS
MAIN_SMTPUTF8_ADVERTISE_HOSTS =
.endif
smtputf8_advertise_hosts = MAIN_SMTPUTF8_ADVERTISE_HOSTS
.endif
.ifdef MAIN_TLS_ENABLE
.ifndef MAIN_TLS_ADVERTISE_HOSTS
MAIN_TLS_ADVERTISE_HOSTS = *
.endif
tls_advertise_hosts = MAIN_TLS_ADVERTISE_HOSTS
tls_on_connect_ports = 465 : 22465
.ifdef MAIN_TLS_CERTKEY
tls_certificate = MAIN_TLS_CERTKEY
.else
.ifndef MAIN_TLS_CERTIFICATE
MAIN_TLS_CERTIFICATE = CONFDIR/exim.crt
.endif
tls_certificate = MAIN_TLS_CERTIFICATE
.ifndef MAIN_TLS_PRIVATEKEY
MAIN_TLS_PRIVATEKEY = CONFDIR/exim.key
.endif
tls_privatekey = MAIN_TLS_PRIVATEKEY
.endif
.ifndef MAIN_TLS_VERIFY_CERTIFICATES
MAIN_TLS_VERIFY_CERTIFICATES = ${if exists{/etc/ssl/certs/ca-certificates.crt}\
{/etc/ssl/certs/ca-certificates.crt}\
{/dev/null}}
.endif
tls_verify_certificates = MAIN_TLS_VERIFY_CERTIFICATES
.ifdef MAIN_TLS_VERIFY_HOSTS
tls_verify_hosts = MAIN_TLS_VERIFY_HOSTS
.endif
.ifdef MAIN_TLS_TRY_VERIFY_HOSTS
tls_try_verify_hosts = MAIN_TLS_TRY_VERIFY_HOSTS
.endif
.else
.endif
extract_addresses_remove_arguments=false
local_scan_path = /usr/lib/exim4/local_scan/sa-exim.so
.ifdef MAIN_LOG_SELECTOR
log_selector = MAIN_LOG_SELECTOR
.endif
begin acl
acl_local_deny_exceptions:
accept
hosts = ${if exists{CONFDIR/host_local_deny_exceptions}\
{CONFDIR/host_local_deny_exceptions}\
{}}
accept
senders = ${if exists{CONFDIR/sender_local_deny_exceptions}\
{CONFDIR/sender_local_deny_exceptions}\
{}}
accept
hosts = ${if exists{CONFDIR/local_host_whitelist}\
{CONFDIR/local_host_whitelist}\
{}}
accept
senders = ${if exists{CONFDIR/local_sender_whitelist}\
{CONFDIR/local_sender_whitelist}\
{}}
.ifdef LOCAL_DENY_EXCEPTIONS_LOCAL_ACL_FILE
.include LOCAL_DENY_EXCEPTIONS_LOCAL_ACL_FILE
.endif
.ifdef WHITELIST_LOCAL_DENY_LOCAL_ACL_FILE
.include WHITELIST_LOCAL_DENY_LOCAL_ACL_FILE
.endif
acl_check_mail:
accept
.ifndef CHECK_RCPT_LOCAL_LOCALPARTS
CHECK_RCPT_LOCAL_LOCALPARTS = ^[.] : ^.*[@%!/|`#&?]
.endif
.ifndef CHECK_RCPT_REMOTE_LOCALPARTS
CHECK_RCPT_REMOTE_LOCALPARTS = ^[./|] : ^.*[@%!`#&?] : ^.*/\\.\\./
.endif
acl_check_rcpt:
accept
hosts = :
control = dkim_disable_verify
.ifdef DC_minimaldns
warn
control = dkim_disable_verify
.else
.ifdef DISABLE_DKIM_VERIFY
warn
control = dkim_disable_verify
.endif
.endif
.ifdef CHECK_RCPT_LOCAL_LOCALPARTS
deny
domains = +local_domains
local_parts = CHECK_RCPT_LOCAL_LOCALPARTS
message = restricted characters in address
.endif
.ifdef CHECK_RCPT_REMOTE_LOCALPARTS
deny
domains = !+local_domains
local_parts = CHECK_RCPT_REMOTE_LOCALPARTS
message = restricted characters in address
.endif
accept
.ifndef CHECK_RCPT_POSTMASTER
local_parts = postmaster
.else
local_parts = CHECK_RCPT_POSTMASTER
.endif
domains = +local_domains : +relay_to_domains
.ifdef CHECK_RCPT_VERIFY_SENDER
deny
!acl = acl_local_deny_exceptions
!verify = sender
message = Sender verification failed
.endif
deny
!acl = acl_local_deny_exceptions
senders = ${if exists{CONFDIR/local_sender_callout}\
{CONFDIR/local_sender_callout}\
{}}
!verify = sender/callout
.ifndef CHECK_RCPT_NO_FAIL_TOO_MANY_BAD_RCPT
deny condition = ${if and {\
{>{$rcpt_count}{10}}\
{<{$recipients_count}{${eval:$rcpt_count/2}}} }}
message = Rejected for too many bad recipients
logwrite = REJECT [$sender_host_address]: bad recipient count high [${eval:$rcpt_count-$recipients_count}]
.endif
accept
hosts = +relay_from_hosts
control = submission/sender_retain
control = dkim_disable_verify
accept
authenticated = *
control = submission/sender_retain
control = dkim_disable_verify
require
message = relay not permitted
domains = +local_domains : +relay_to_domains
require
verify = recipient
deny
!acl = acl_local_deny_exceptions
recipients = ${if exists{CONFDIR/local_rcpt_callout}\
{CONFDIR/local_rcpt_callout}\
{}}
!verify = recipient/callout
deny
!acl = acl_local_deny_exceptions
senders = ${if exists{CONFDIR/local_sender_blacklist}\
{CONFDIR/local_sender_blacklist}\
{}}
message = sender envelope address $sender_address is locally blacklisted here. If you think this is wrong, get in touch with postmaster
log_message = sender envelope address is locally blacklisted.
deny
!acl = acl_local_deny_exceptions
hosts = ${if exists{CONFDIR/local_host_blacklist}\
{CONFDIR/local_host_blacklist}\
{}}
message = sender IP address $sender_host_address is locally blacklisted here. If you think this is wrong, get in touch with postmaster
log_message = sender IP address is locally blacklisted.
.ifdef CHECK_RCPT_REVERSE_DNS
warn
condition = ${if and{{def:sender_host_address}{!def:sender_host_name}}\
{yes}{no}}
add_header = X-Host-Lookup-Failed: Reverse DNS lookup failed for $sender_host_address (${if eq{$host_lookup_failed}{1}{failed}{deferred}})
.endif
.ifdef CHECK_RCPT_SPF
deny
!acl = acl_local_deny_exceptions
condition = ${run{/usr/bin/spfquery.mail-spf-perl --ip \
${quote:$sender_host_address} --identity \
${if def:sender_address_domain \
{--scope mfrom --identity ${quote:$sender_address}}\
{--scope helo --identity ${quote:$sender_helo_name}}}}\
{no}{${if eq {$runrc}{1}{yes}{no}}}}
message = [SPF] $sender_host_address is not allowed to send mail from \
${if def:sender_address_domain {$sender_address_domain}{$sender_helo_name}}.
log_message = SPF check failed.
defer
!acl = acl_local_deny_exceptions
condition = ${if eq {$runrc}{5}{yes}{no}}
message = Temporary DNS error while checking SPF record. Try again later.
warn
condition = ${if <={$runrc}{6}{yes}{no}}
add_header = Received-SPF: ${if eq {$runrc}{0}{pass}\
{${if eq {$runrc}{2}{softfail}\
{${if eq {$runrc}{3}{neutral}\
{${if eq {$runrc}{4}{permerror}\
{${if eq {$runrc}{6}{none}{error}}}}}}}}}\
} client-ip=$sender_host_address; \
${if def:sender_address_domain \
{envelope-from=${sender_address}; }{}}\
helo=$sender_helo_name
warn
condition = ${if >{$runrc}{6}{yes}{no}}
log_message = Unexpected error in SPF check.
.endif
.ifdef CHECK_RCPT_IP_DNSBLS
warn
dnslists = CHECK_RCPT_IP_DNSBLS
add_header = X-Warning: $sender_host_address is listed at $dnslist_domain ($dnslist_value: $dnslist_text)
log_message = $sender_host_address is listed at $dnslist_domain ($dnslist_value: $dnslist_text)
.endif
.ifdef CHECK_RCPT_DOMAIN_DNSBLS
warn
!senders = ${if exists{CONFDIR/local_domain_dnsbl_whitelist}\
{CONFDIR/local_domain_dnsbl_whitelist}\
{}}
dnslists = CHECK_RCPT_DOMAIN_DNSBLS
add_header = X-Warning: $sender_address_domain is listed at $dnslist_domain ($dnslist_value: $dnslist_text)
log_message = $sender_address_domain is listed at $dnslist_domain ($dnslist_value: $dnslist_text)
.endif
.ifdef CHECK_RCPT_LOCAL_ACL_FILE
.include CHECK_RCPT_LOCAL_ACL_FILE
.endif
accept
domains = +relay_to_domains
endpass
verify = recipient
accept
acl_check_data:
.ifndef IGNORE_SMTP_LINE_LENGTH_LIMIT
deny
condition = ${if > {$max_received_linelength}{998}}
message = maximum allowed line length is 998 octets, \
got $max_received_linelength
.endif
.ifndef NO_CHECK_DATA_VERIFY_HEADER_SYNTAX
deny
!acl = acl_local_deny_exceptions
!verify = header_syntax
message = header syntax
log_message = header syntax ($acl_verify_message)
.endif
.ifdef CHECK_DATA_VERIFY_HEADER_SENDER
deny
!acl = acl_local_deny_exceptions
!verify = header_sender
message = No verifiable sender address in message headers
.endif
.ifdef CHECK_DATA_LOCAL_ACL_FILE
.include CHECK_DATA_LOCAL_ACL_FILE
.endif
accept
begin routers
.ifdef MAIN_ALLOW_DOMAIN_LITERALS
domain_literal:
debug_print = "R: domain_literal for $local_part@$domain"
driver = ipliteral
domains = ! +local_domains
transport = remote_smtp
.endif
hubbed_hosts:
debug_print = "R: hubbed_hosts for $domain"
driver = manualroute
domains = "${if exists{CONFDIR/hubbed_hosts}\
{partial-lsearch;CONFDIR/hubbed_hosts}\
fail}"
same_domain_copy_routing = yes
route_data = ${lookup{$domain}partial-lsearch{CONFDIR/hubbed_hosts}}
transport = remote_smtp
.ifdef DCconfig_internet
dnslookup_relay_to_domains:
debug_print = "R: dnslookup_relay_to_domains for $local_part@$domain"
driver = dnslookup
domains = ! +local_domains : +relay_to_domains
transport = remote_smtp
same_domain_copy_routing = yes
no_more
.ifndef ROUTER_DNSLOOKUP_IGNORE_TARGET_HOSTS
ROUTER_DNSLOOKUP_IGNORE_TARGET_HOSTS = <; 0.0.0.0 ; 127.0.0.0/8 ; 192.168.0.0/16 ; 172.16.0.0/12 ; 10.0.0.0/8 ; 169.254.0.0/16 ; 255.255.255.255 ; ::/128 ; ::1/128 ; fc00::/7 ; fe80::/10 ; 100::/64
.endif
dnslookup:
debug_print = "R: dnslookup for $local_part@$domain"
driver = dnslookup
domains = ! +local_domains
transport = remote_smtp
same_domain_copy_routing = yes
ignore_target_hosts = ROUTER_DNSLOOKUP_IGNORE_TARGET_HOSTS
no_more
.endif
.ifdef DCconfig_local
nonlocal:
debug_print = "R: nonlocal for $local_part@$domain"
driver = redirect
domains = ! +local_domains
allow_fail
data = :fail: Mailing to remote domains not supported
no_more
.endif
.ifdef DCconfig_smarthost DCconfig_satellite
smarthost:
debug_print = "R: smarthost for $local_part@$domain"
driver = manualroute
domains = ! +local_domains
transport = remote_smtp_smarthost
route_list = * DCsmarthost byname
host_find_failed = ignore
same_domain_copy_routing = yes
no_more
.endif
COND_LOCAL_SUBMITTER = "\
${if match_ip{$sender_host_address}{:@[]}\
{1}{0}\
}"
real_local:
debug_print = "R: real_local for $local_part@$domain"
driver = accept
domains = +local_domains
condition = COND_LOCAL_SUBMITTER
local_part_prefix = real-
check_local_user
transport = LOCAL_DELIVERY
vdom_aliases:
driver = redirect
allow_defer
allow_fail
domains = dsearch,ret=full;/etc/exim4/maildomains
data = ${expand:${lookup{$local_part}wildlsearch*@{$domain_data}}}
retry_use_local_part
local_part_suffix_optional
local_part_suffix = +*
pipe_transport = address_pipe
file_transport = address_file
no_more
system_aliases:
debug_print = "R: system_aliases for $local_part@$domain"
driver = redirect
domains = +local_domains
allow_fail
allow_defer
data = ${lookup{$local_part}lsearch{/etc/aliases}}
.ifdef SYSTEM_ALIASES_USER
user = SYSTEM_ALIASES_USER
.endif
.ifdef SYSTEM_ALIASES_GROUP
group = SYSTEM_ALIASES_GROUP
.endif
.ifdef SYSTEM_ALIASES_FILE_TRANSPORT
file_transport = SYSTEM_ALIASES_FILE_TRANSPORT
.endif
.ifdef SYSTEM_ALIASES_PIPE_TRANSPORT
pipe_transport = SYSTEM_ALIASES_PIPE_TRANSPORT
.endif
.ifdef SYSTEM_ALIASES_DIRECTORY_TRANSPORT
directory_transport = SYSTEM_ALIASES_DIRECTORY_TRANSPORT
.endif
local_part_suffix_optional
local_part_suffix = +*
.ifdef DCconfig_satellite
hub_user:
debug_print = "R: hub_user for $local_part@$domain"
driver = redirect
domains = +local_domains
data = ${local_part}@DCreadhost
check_local_user
hub_user_smarthost:
debug_print = "R: hub_user_smarthost for $local_part@$domain"
driver = manualroute
domains = DCreadhost
transport = remote_smtp_smarthost
route_list = * DCsmarthost byname
host_find_failed = ignore
same_domain_copy_routing = yes
check_local_user
.endif
userforward:
debug_print = "R: userforward for $local_part@$domain"
driver = redirect
domains = +local_domains
check_local_user
local_part_suffix = +*
local_part_suffix_optional
file = $home/.forward
require_files = $local_part_data:$home/.forward
no_verify
no_expn
check_ancestor
allow_filter
forbid_smtp_code = true
directory_transport = address_directory
file_transport = address_file
pipe_transport = address_pipe
reply_transport = address_reply
skip_syntax_errors
syntax_errors_to = real-$local_part@$domain
syntax_errors_text = \
This is an automatically generated message. An error has\n\
been found in your .forward file. Details of the error are\n\
reported below. While this error persists, you will receive\n\
a copy of this message for every message that is addressed\n\
to you. If your .forward file is a filter file, or if it is\n\
a non-filter file containing no valid forwarding addresses,\n\
a copy of each incoming message will be put in your normal\n\
mailbox. If a non-filter file contains at least one valid\n\
forwarding address, forwarding to the valid addresses will\n\
happen, and those will be the only deliveries that occur.
procmail:
debug_print = "R: procmail for $local_part@$domain"
driver = accept
domains = +local_domains
check_local_user
transport = procmail_pipe
require_files = ${local_part_data}:\
${if exists{/etc/procmailrc}\
{/etc/procmailrc}{${home}/.procmailrc}}:\
+/usr/bin/procmail
no_verify
no_expn
maildrop:
debug_print = "R: maildrop for $local_part@$domain"
driver = accept
domains = +local_domains
check_local_user
transport = maildrop_pipe
require_files = ${local_part_data}:${home}/.mailfilter:+/usr/bin/maildrop
no_verify
no_expn
.ifndef FIRST_USER_ACCOUNT_UID
FIRST_USER_ACCOUNT_UID = 0
.endif
.ifndef DEFAULT_SYSTEM_ACCOUNT_ALIAS
DEFAULT_SYSTEM_ACCOUNT_ALIAS = :fail: no mail to system accounts
.endif
COND_SYSTEM_USER_AND_REMOTE_SUBMITTER = "\
${if and{{! match_ip{$sender_host_address}{:@[]}}\
{<{$local_user_uid}{FIRST_USER_ACCOUNT_UID}}}\
{1}{0}\
}"
lowuid_aliases:
debug_print = "R: lowuid_aliases for $local_part@$domain (UID $local_user_uid)"
check_local_user
driver = redirect
allow_fail
domains = +local_domains
condition = COND_SYSTEM_USER_AND_REMOTE_SUBMITTER
data = ${if exists{CONFDIR/lowuid-aliases}\
{${lookup{$local_part}lsearch{CONFDIR/lowuid-aliases}\
{$value}{DEFAULT_SYSTEM_ACCOUNT_ALIAS}}}\
{DEFAULT_SYSTEM_ACCOUNT_ALIAS}}
local_user:
debug_print = "R: local_user for $local_part@$domain"
driver = accept
domains = +local_domains
check_local_user
local_parts = ! root
transport = LOCAL_DELIVERY
cannot_route_message = Unknown user
local_part_suffix_optional
local_part_suffix = +*
mail4root:
debug_print = "R: mail4root for $local_part@$domain"
driver = redirect
domains = +local_domains
data = /var/mail/mail
file_transport = address_file
local_parts = root
user = mail
group = mail
begin transports
.ifdef HIDE_MAILNAME
REMOTE_SMTP_HEADERS_REWRITE=*@+local_domains $1@DCreadhost frs : *@ETC_MAILNAME $1@DCreadhost frs
REMOTE_SMTP_RETURN_PATH=${if match_domain{$sender_address_domain}{+local_domains}{${sender_address_local_part}@DCreadhost}{${if match_domain{$sender_address_domain}{ETC_MAILNAME}{${sender_address_local_part}@DCreadhost}fail}}}
.endif
.ifdef REMOTE_SMTP_HELO_FROM_DNS
.ifdef REMOTE_SMTP_HELO_DATA
REMOTE_SMTP_HELO_DATA==${lookup dnsdb {ptr=$sending_ip_address}{$value}{$primary_hostname}}
.else
REMOTE_SMTP_HELO_DATA=${lookup dnsdb {ptr=$sending_ip_address}{$value}{$primary_hostname}}
.endif
.endif
.ifndef REMOTE_SMTP_SMARTHOST_TLS_VERIFY_HOSTS
REMOTE_SMTP_SMARTHOST_TLS_VERIFY_HOSTS = *
.endif
address_file:
debug_print = "T: address_file for $local_part@$domain"
driver = appendfile
delivery_date_add
envelope_to_add
return_path_add
address_pipe:
debug_print = "T: address_pipe for $local_part@$domain"
driver = pipe
return_fail_output
address_reply:
debug_print = "T: autoreply for $local_part@$domain"
driver = autoreply
mail_spool:
debug_print = "T: appendfile for $local_part@$domain"
driver = appendfile
file = /var/mail/$local_part_data
delivery_date_add
envelope_to_add
return_path_add
group = mail
mode = 0660
mode_fail_narrower = false
maildir_home:
debug_print = "T: maildir_home for $local_part@$domain"
driver = appendfile
.ifdef MAILDIR_HOME_MAILDIR_LOCATION
directory = MAILDIR_HOME_MAILDIR_LOCATION
.else
directory = $home/Maildir
.endif
.ifdef MAILDIR_HOME_CREATE_DIRECTORY
create_directory
.endif
.ifdef MAILDIR_HOME_CREATE_FILE
create_file = MAILDIR_HOME_CREATE_FILE
.endif
delivery_date_add
envelope_to_add
return_path_add
maildir_format
.ifdef MAILDIR_HOME_DIRECTORY_MODE
directory_mode = MAILDIR_HOME_DIRECTORY_MODE
.else
directory_mode = 0700
.endif
.ifdef MAILDIR_HOME_MODE
mode = MAILDIR_HOME_MODE
.else
mode = 0600
.endif
mode_fail_narrower = false
maildrop_pipe:
debug_print = "T: maildrop_pipe for $local_part@$domain"
driver = pipe
path = "/bin:/usr/bin:/usr/local/bin"
command = "/usr/bin/maildrop"
message_prefix =
message_suffix =
return_path_add
delivery_date_add
envelope_to_add
procmail_pipe:
debug_print = "T: procmail_pipe for $local_part@$domain"
driver = pipe
path = "/bin:/usr/bin:/usr/local/bin"
command = "/usr/bin/procmail"
return_path_add
delivery_date_add
envelope_to_add
remote_smtp:
debug_print = "T: remote_smtp for $local_part@$domain"
driver = smtp
.ifdef REMOTE_SMTP_HOSTS_AVOID_TLS
hosts_avoid_tls = REMOTE_SMTP_HOSTS_AVOID_TLS
.endif
.ifdef REMOTE_SMTP_HEADERS_REWRITE
headers_rewrite = REMOTE_SMTP_HEADERS_REWRITE
.endif
.ifdef REMOTE_SMTP_RETURN_PATH
return_path = REMOTE_SMTP_RETURN_PATH
.endif
.ifdef REMOTE_SMTP_HELO_DATA
helo_data=REMOTE_SMTP_HELO_DATA
.endif
.ifdef REMOTE_SMTP_INTERFACE
interface = REMOTE_SMTP_INTERFACE
.endif
.ifdef DKIM_DOMAIN
dkim_domain = DKIM_DOMAIN
.endif
.ifdef DKIM_IDENTITY
dkim_identity = DKIM_IDENTITY
.endif
.ifdef DKIM_SELECTOR
dkim_selector = DKIM_SELECTOR
.endif
.ifdef DKIM_PRIVATE_KEY
dkim_private_key = DKIM_PRIVATE_KEY
.endif
.ifdef DKIM_CANON
dkim_canon = DKIM_CANON
.endif
.ifdef DKIM_STRICT
dkim_strict = DKIM_STRICT
.endif
.ifdef DKIM_SIGN_HEADERS
dkim_sign_headers = DKIM_SIGN_HEADERS
.endif
.ifdef DKIM_TIMESTAMPS
dkim_timestamps = DKIM_TIMESTAMPS
.endif
.ifdef TLS_DH_MIN_BITS
tls_dh_min_bits = TLS_DH_MIN_BITS
.endif
.ifdef REMOTE_SMTP_TLS_CERTIFICATE
tls_certificate = REMOTE_SMTP_TLS_CERTIFICATE
.endif
.ifdef REMOTE_SMTP_PRIVATEKEY
tls_privatekey = REMOTE_SMTP_PRIVATEKEY
.endif
.ifdef REMOTE_SMTP_HOSTS_REQUIRE_TLS
hosts_require_tls = REMOTE_SMTP_HOSTS_REQUIRE_TLS
.endif
.ifdef REMOTE_SMTP_TRANSPORTS_HEADERS_REMOVE
headers_remove = REMOTE_SMTP_TRANSPORTS_HEADERS_REMOVE
.endif
remote_smtp_smarthost:
debug_print = "T: remote_smtp_smarthost for $local_part@$domain"
driver = smtp
multi_domain
hosts_try_auth = <; ${if exists{CONFDIR/passwd.client} \
{\
${lookup{$host}nwildlsearch{CONFDIR/passwd.client}{$host_address}}\
}\
{} \
}
.ifdef REMOTE_SMTP_SMARTHOST_HOSTS_AVOID_TLS
hosts_avoid_tls = REMOTE_SMTP_SMARTHOST_HOSTS_AVOID_TLS
.endif
.ifdef REMOTE_SMTP_SMARTHOST_HOSTS_REQUIRE_TLS
hosts_require_tls = REMOTE_SMTP_SMARTHOST_HOSTS_REQUIRE_TLS
.endif
.ifdef REMOTE_SMTP_SMARTHOST_TLS_VERIFY_CERTIFICATES
tls_verify_certificates = REMOTE_SMTP_SMARTHOST_TLS_VERIFY_CERTIFICATES
.endif
.ifdef REMOTE_SMTP_SMARTHOST_TLS_VERIFY_HOSTS
tls_verify_hosts = REMOTE_SMTP_SMARTHOST_TLS_VERIFY_HOSTS
.endif
.ifdef REMOTE_SMTP_HEADERS_REWRITE
headers_rewrite = REMOTE_SMTP_HEADERS_REWRITE
.endif
.ifdef REMOTE_SMTP_RETURN_PATH
return_path = REMOTE_SMTP_RETURN_PATH
.endif
.ifdef REMOTE_SMTP_HELO_DATA
helo_data=REMOTE_SMTP_HELO_DATA
.endif
.ifdef TLS_DH_MIN_BITS
tls_dh_min_bits = TLS_DH_MIN_BITS
.endif
.ifdef REMOTE_SMTP_SMARTHOST_TLS_CERTIFICATE
tls_certificate = REMOTE_SMTP_SMARTHOST_TLS_CERTIFICATE
.endif
.ifdef REMOTE_SMTP_SMARTHOST_PRIVATEKEY
tls_privatekey = REMOTE_SMTP_SMARTHOST_PRIVATEKEY
.endif
.ifdef REMOTE_SMTP_TRANSPORTS_HEADERS_REMOVE
headers_remove = REMOTE_SMTP_TRANSPORTS_HEADERS_REMOVE
.endif
.ifdef REMOTE_SMTP_SMARTHOST_PROTOCOL
protocol = REMOTE_SMTP_SMARTHOST_PROTOCOL
.endif
address_directory:
debug_print = "T: address_directory for $local_part@$domain"
driver = appendfile
delivery_date_add
envelope_to_add
return_path_add
check_string = ""
escape_string = ""
maildir_format
begin retry
* * F,2h,15m; G,16h,1h,1.5; F,4d,6h
begin rewrite
.ifndef NO_EAA_REWRITE_REWRITE
*@+local_domains "${lookup{${local_part}}lsearch{/etc/email-addresses}\
{$value}fail}" Ffrs
*@ETC_MAILNAME "${lookup{${local_part}}lsearch{/etc/email-addresses}\
{$value}fail}" Ffrs
.endif
begin authenticators
plain_server:
driver = plaintext
public_name = PLAIN
server_condition = "${if crypteq{$auth3}{${extract{1}{:}{${lookup{$auth2}lsearch{CONFDIR/passwd}{$value}{*:*}}}}}{1}{0}}"
server_set_id = $auth2
server_prompts = :
.ifndef AUTH_SERVER_ALLOW_NOTLS_PASSWORDS
server_advertise_condition = ${if eq{$tls_in_cipher}{}{}{*}}
.endif
login_server:
driver = plaintext
public_name = LOGIN
server_prompts = "Username:: : Password::"
server_condition = "${if crypteq{$auth2}{${extract{1}{:}{${lookup{$auth1}lsearch{CONFDIR/passwd}{$value}{*:*}}}}}{1}{0}}"
server_set_id = $auth1
.ifndef AUTH_SERVER_ALLOW_NOTLS_PASSWORDS
server_advertise_condition = ${if eq{$tls_in_cipher}{}{}{*}}
.endif
cram_md5:
driver = cram_md5
public_name = CRAM-MD5
client_name = ${extract{1}{:}{${lookup{$host}nwildlsearch{CONFDIR/passwd.client}{$value}fail}}}
client_secret = ${extract{2}{:}{${lookup{$host}nwildlsearch{CONFDIR/passwd.client}{$value}fail}}}
--
## subscription configuration (requires account):
##
https://lists.exim.org/mailman3/postorius/lists/exim-users.lists.exim.org/
## unsubscribe (doesn't require an account):
## exim-users-unsubscribe@???
## Exim details at
http://www.exim.org/
## Please use the Wiki with this list -
http://wiki.exim.org/
