Revision: 1766
http://vcs.pcre.org/viewvc?view=rev&revision=1766
Author: ph10
Date: 2021-06-15 17:15:50 +0100 (Tue, 15 Jun 2021)
Log Message:
-----------
Final source tidies for 8.45 release.
Modified Paths:
--------------
code/trunk/AUTHORS
code/trunk/ChangeLog
code/trunk/LICENCE
code/trunk/NEWS
code/trunk/NON-AUTOTOOLS-BUILD
code/trunk/README
code/trunk/configure.ac
code/trunk/doc/html/NON-AUTOTOOLS-BUILD.txt
code/trunk/doc/html/README.txt
code/trunk/doc/html/index.html
code/trunk/doc/html/pcreapi.html
code/trunk/doc/html/pcredemo.html
code/trunk/doc/html/pcrejit.html
code/trunk/doc/html/pcrepattern.html
code/trunk/doc/html/pcresyntax.html
code/trunk/doc/pcre.txt
code/trunk/doc/pcredemo.3
code/trunk/maint/README
code/trunk/pcre_compile.c
Modified: code/trunk/AUTHORS
===================================================================
--- code/trunk/AUTHORS 2021-06-14 11:21:20 UTC (rev 1765)
+++ code/trunk/AUTHORS 2021-06-15 16:15:50 UTC (rev 1766)
@@ -2,13 +2,13 @@
---------------------
Written by: Philip Hazel
-Email local part: ph10
-Email domain: cam.ac.uk
+Email local part: Philip.Hazel
+Email domain: gmail.com
University of Cambridge Computing Service,
Cambridge, England.
-Copyright (c) 1997-2020 University of Cambridge
+Copyright (c) 1997-2021 University of Cambridge
All rights reserved
@@ -19,7 +19,7 @@
Email local part: hzmester
Emain domain: freemail.hu
-Copyright(c) 2010-2020 Zoltan Herczeg
+Copyright(c) 2010-2021 Zoltan Herczeg
All rights reserved.
@@ -30,7 +30,7 @@
Email local part: hzmester
Emain domain: freemail.hu
-Copyright(c) 2009-2020 Zoltan Herczeg
+Copyright(c) 2009-2021 Zoltan Herczeg
All rights reserved.
Modified: code/trunk/ChangeLog
===================================================================
--- code/trunk/ChangeLog 2021-06-14 11:21:20 UTC (rev 1765)
+++ code/trunk/ChangeLog 2021-06-15 16:15:50 UTC (rev 1766)
@@ -5,16 +5,16 @@
is happening in the PCRE2 10.xx series.
-Version 8.45 14-June-2021
+Version 8.45 15-June-2021
-------------------------
This is the final release of PCRE1. A few minor tidies are included.
-1. CMakeLists.txt has two user-supplied patches applied, one to allow for the
-setting of MODULE_PATH, and the other to support the generation of pcre-config
+1. CMakeLists.txt has two user-supplied patches applied, one to allow for the
+setting of MODULE_PATH, and the other to support the generation of pcre-config
file and libpcre*.pc files.
-2. There was a memory leak if a compile error occurred when there were more
+2. There was a memory leak if a compile error occurred when there were more
than 20 named groups (Bugzilla #2613).
3. Fixed some typos in code and documentation.
Modified: code/trunk/LICENCE
===================================================================
--- code/trunk/LICENCE 2021-06-14 11:21:20 UTC (rev 1765)
+++ code/trunk/LICENCE 2021-06-15 16:15:50 UTC (rev 1766)
@@ -19,13 +19,13 @@
---------------------------
Written by: Philip Hazel
-Email local part: ph10
-Email domain: cam.ac.uk
+Email local part: Philip.Hazel
+Email domain: gmail.com
University of Cambridge Computing Service,
Cambridge, England.
-Copyright (c) 1997-2020 University of Cambridge
+Copyright (c) 1997-2021 University of Cambridge
All rights reserved.
@@ -36,7 +36,7 @@
Email local part: hzmester
Email domain: freemail.hu
-Copyright(c) 2010-2020 Zoltan Herczeg
+Copyright(c) 2010-2021 Zoltan Herczeg
All rights reserved.
@@ -47,7 +47,7 @@
Email local part: hzmester
Email domain: freemail.hu
-Copyright(c) 2009-2020 Zoltan Herczeg
+Copyright(c) 2009-2021 Zoltan Herczeg
All rights reserved.
Modified: code/trunk/NEWS
===================================================================
--- code/trunk/NEWS 2021-06-14 11:21:20 UTC (rev 1765)
+++ code/trunk/NEWS 2021-06-15 16:15:50 UTC (rev 1766)
@@ -5,10 +5,10 @@
projects are advised to use the PCRE2 libraries.
-Release 8.45 14-June-2021
+Release 8.45 15-June-2021
-----------------------------
-This is the final PCRE1 release.
+This is the final PCRE1 release. A very few small issues have been fixed.
Release 8.44 12-February-2020
Modified: code/trunk/NON-AUTOTOOLS-BUILD
===================================================================
--- code/trunk/NON-AUTOTOOLS-BUILD 2021-06-14 11:21:20 UTC (rev 1765)
+++ code/trunk/NON-AUTOTOOLS-BUILD 2021-06-15 16:15:50 UTC (rev 1766)
@@ -768,6 +768,6 @@
However, this software is not maintained and will not be upgraded. If you are
new to PCRE you should be looking at PCRE2 (version 10.30 or later).
-===============================
-Last Updated: 13 September 2017
-===============================
+==========================
+Last Updated: 15 June 2021
+==========================
Modified: code/trunk/README
===================================================================
--- code/trunk/README 2021-06-14 11:21:20 UTC (rev 1765)
+++ code/trunk/README 2021-06-15 16:15:50 UTC (rev 1766)
@@ -997,6 +997,6 @@
RunTest.bat a script for running tests under Windows
Philip Hazel
-Email local part: ph10
-Email domain: cam.ac.uk
-Last updated: 12 February 2020
+Email local part: Philip.Hazel
+Email domain: gmail.com
+Last updated: 15 June 2021
Modified: code/trunk/configure.ac
===================================================================
--- code/trunk/configure.ac 2021-06-14 11:21:20 UTC (rev 1765)
+++ code/trunk/configure.ac 2021-06-15 16:15:50 UTC (rev 1766)
@@ -11,15 +11,15 @@
m4_define(pcre_major, [8])
m4_define(pcre_minor, [45])
m4_define(pcre_prerelease, [])
-m4_define(pcre_date, [2021-06-14])
+m4_define(pcre_date, [2021-06-15])
# NOTE: The CMakeLists.txt file searches for the above variables in the first
# 50 lines of this file. Please update that if the variables above are moved.
# Libtool shared library interface versions (current:revision:age)
-m4_define(libpcre_version, [3:12:2])
-m4_define(libpcre16_version, [2:12:2])
-m4_define(libpcre32_version, [0:12:0])
+m4_define(libpcre_version, [3:13:2])
+m4_define(libpcre16_version, [2:13:2])
+m4_define(libpcre32_version, [0:13:0])
m4_define(libpcreposix_version, [0:7:0])
m4_define(libpcrecpp_version, [0:2:0])
Modified: code/trunk/doc/html/NON-AUTOTOOLS-BUILD.txt
===================================================================
--- code/trunk/doc/html/NON-AUTOTOOLS-BUILD.txt 2021-06-14 11:21:20 UTC (rev 1765)
+++ code/trunk/doc/html/NON-AUTOTOOLS-BUILD.txt 2021-06-15 16:15:50 UTC (rev 1766)
@@ -768,6 +768,6 @@
However, this software is not maintained and will not be upgraded. If you are
new to PCRE you should be looking at PCRE2 (version 10.30 or later).
-===============================
-Last Updated: 13 September 2017
-===============================
+==========================
+Last Updated: 15 June 2021
+==========================
Modified: code/trunk/doc/html/README.txt
===================================================================
--- code/trunk/doc/html/README.txt 2021-06-14 11:21:20 UTC (rev 1765)
+++ code/trunk/doc/html/README.txt 2021-06-15 16:15:50 UTC (rev 1766)
@@ -997,6 +997,6 @@
RunTest.bat a script for running tests under Windows
Philip Hazel
-Email local part: ph10
-Email domain: cam.ac.uk
-Last updated: 12 February 2020
+Email local part: Philip.Hazel
+Email domain: gmail.com
+Last updated: 15 June 2021
Modified: code/trunk/doc/html/index.html
===================================================================
--- code/trunk/doc/html/index.html 2021-06-14 11:21:20 UTC (rev 1765)
+++ code/trunk/doc/html/index.html 2021-06-15 16:15:50 UTC (rev 1766)
@@ -1,10 +1,10 @@
<html>
-<!-- This is a manually maintained file that is the root of the HTML version of
- the PCRE documentation. When the HTML documents are built from the man
- page versions, the entire doc/html directory is emptied, this file is then
- copied into doc/html/index.html, and the remaining files therein are
+<!-- This is a manually maintained file that is the root of the HTML version of
+ the PCRE documentation. When the HTML documents are built from the man
+ page versions, the entire doc/html directory is emptied, this file is then
+ copied into doc/html/index.html, and the remaining files therein are
created by the 132html script.
--->
+-->
<head>
<title>PCRE specification</title>
</head>
@@ -96,7 +96,7 @@
functions.
</p>
-<table>
+<table>
<tr><td><a href="pcre_assign_jit_stack.html">pcre_assign_jit_stack</a></td>
<td> Assign stack for JIT matching</td></tr>
@@ -162,7 +162,7 @@
<tr><td><a href="pcre_maketables.html">pcre_maketables</a></td>
<td> Build character tables in current locale</td></tr>
-
+
<tr><td><a href="pcre_pattern_to_host_byte_order.html">pcre_pattern_to_host_byte_order</a></td>
<td> Convert compiled pattern to host byte order if necessary</td></tr>
Modified: code/trunk/doc/html/pcreapi.html
===================================================================
--- code/trunk/doc/html/pcreapi.html 2021-06-14 11:21:20 UTC (rev 1765)
+++ code/trunk/doc/html/pcreapi.html 2021-06-15 16:15:50 UTC (rev 1766)
@@ -1718,7 +1718,7 @@
<P>
The default value for the limit can be set when PCRE is built; the default
default is 10 million, which handles all but the most extreme cases. You can
-override the default by suppling <b>pcre_exec()</b> with a <b>pcre_extra</b>
+override the default by supplying <b>pcre_exec()</b> with a <b>pcre_extra</b>
block in which <i>match_limit</i> is set, and PCRE_EXTRA_MATCH_LIMIT is set in
the <i>flags</i> field. If the limit is exceeded, <b>pcre_exec()</b> returns
PCRE_ERROR_MATCHLIMIT.
@@ -1749,7 +1749,7 @@
<P>
The default value for <i>match_limit_recursion</i> can be set when PCRE is
built; the default default is the same value as the default for
-<i>match_limit</i>. You can override the default by suppling <b>pcre_exec()</b>
+<i>match_limit</i>. You can override the default by supplying <b>pcre_exec()</b>
with a <b>pcre_extra</b> block in which <i>match_limit_recursion</i> is set, and
PCRE_EXTRA_MATCH_LIMIT_RECURSION is set in the <i>flags</i> field. If the limit
is exceeded, <b>pcre_exec()</b> returns PCRE_ERROR_RECURSIONLIMIT.
@@ -2063,10 +2063,10 @@
</pre>
which finds occurrences of "iss" in the middle of words. (\B matches only if
the current position in the subject is not a word boundary.) When applied to
-the string "Mississipi" the first call to <b>pcre_exec()</b> finds the first
+the string "Mississippi" the first call to <b>pcre_exec()</b> finds the first
occurrence. If <b>pcre_exec()</b> is called again with just the remainder of the
-subject, namely "issipi", it does not match, because \B is always false at the
-start of the subject, which is deemed to be a word boundary. However, if
+subject, namely "issippi", it does not match, because \B is always false at
+the start of the subject, which is deemed to be a word boundary. However, if
<b>pcre_exec()</b> is passed the entire string again, but with <i>startoffset</i>
set to 4, it finds the second occurrence of "iss" because it is able to look
behind the starting point to discover that it is preceded by a letter.
Modified: code/trunk/doc/html/pcredemo.html
===================================================================
--- code/trunk/doc/html/pcredemo.html 2021-06-14 11:21:20 UTC (rev 1765)
+++ code/trunk/doc/html/pcredemo.html 2021-06-15 16:15:50 UTC (rev 1766)
@@ -161,7 +161,7 @@
return 1;
}
-/* Match succeded */
+/* Match succeeded */
printf("\nMatch succeeded at offset %d\n", ovector[0]);
@@ -379,7 +379,7 @@
return 1;
}
- /* Match succeded */
+ /* Match succeeded */
printf("\nMatch succeeded again at offset %d\n", ovector[0]);
Modified: code/trunk/doc/html/pcrejit.html
===================================================================
--- code/trunk/doc/html/pcrejit.html 2021-06-14 11:21:20 UTC (rev 1765)
+++ code/trunk/doc/html/pcrejit.html 2021-06-15 16:15:50 UTC (rev 1766)
@@ -299,7 +299,7 @@
This is a suggestion for how a multithreaded program that needs to set up
non-default JIT stacks might operate:
<pre>
- During thread initalization
+ During thread initialization
thread_local_var = pcre_jit_stack_alloc(...)
During thread exit
Modified: code/trunk/doc/html/pcrepattern.html
===================================================================
--- code/trunk/doc/html/pcrepattern.html 2021-06-14 11:21:20 UTC (rev 1765)
+++ code/trunk/doc/html/pcrepattern.html 2021-06-15 16:15:50 UTC (rev 1766)
@@ -655,7 +655,7 @@
<P>
It is possible to restrict \R to match only CR, LF, or CRLF (instead of the
complete set of Unicode line endings) by setting the option PCRE_BSR_ANYCRLF
-either at compile time or when the pattern is matched. (BSR is an abbrevation
+either at compile time or when the pattern is matched. (BSR is an abbreviation
for "backslash R".) This can be made the default when PCRE is built; if this is
the case, the other behaviour can be requested via the PCRE_BSR_UNICODE option.
It is also possible to specify these settings by starting a pattern string with
@@ -972,7 +972,7 @@
3. Do not break Hangul (a Korean script) syllable sequences. Hangul characters
are of five types: L, V, T, LV, and LVT. An L character may be followed by an
L, V, LV, or LVT character; an LV or V character may be followed by a V or T
-character; an LVT or T character may be follwed only by a T character.
+character; an LVT or T character may be followed only by a T character.
</P>
<P>
4. Do not end before extending characters or spacing marks. Characters with
@@ -3080,7 +3080,7 @@
</pre>
If the subject is "aaaac...", after the first match attempt fails (starting at
the first character in the string), the starting point skips on to start the
-next attempt at "c". Note that a possessive quantifer does not have the same
+next attempt at "c". Note that a possessive quantifier does not have the same
effect as this example; although it would suppress backtracking during the
first match attempt, the second attempt would start at the second character
instead of skipping on to "c".
Modified: code/trunk/doc/html/pcresyntax.html
===================================================================
--- code/trunk/doc/html/pcresyntax.html 2021-06-14 11:21:20 UTC (rev 1765)
+++ code/trunk/doc/html/pcresyntax.html 2021-06-15 16:15:50 UTC (rev 1766)
@@ -157,7 +157,7 @@
Xan Alphanumeric: union of properties L and N
Xps POSIX space: property Z or tab, NL, VT, FF, CR
Xsp Perl space: property Z or tab, NL, VT, FF, CR
- Xuc Univerally-named character: one that can be
+ Xuc Universally-named character: one that can be
represented by a Universal Character Name
Xwd Perl word: property Xan or underscore
</pre>
Modified: code/trunk/doc/pcre.txt
===================================================================
--- code/trunk/doc/pcre.txt 2021-06-14 11:21:20 UTC (rev 1765)
+++ code/trunk/doc/pcre.txt 2021-06-15 16:15:50 UTC (rev 1766)
@@ -193,8 +193,8 @@
Last updated: 14 June 2021
Copyright (c) 1997-2021 University of Cambridge.
------------------------------------------------------------------------------
-
-
+
+
PCRE(3) Library Functions Manual PCRE(3)
@@ -525,8 +525,8 @@
Last updated: 12 May 2013
Copyright (c) 1997-2013 University of Cambridge.
------------------------------------------------------------------------------
-
-
+
+
PCRE(3) Library Functions Manual PCRE(3)
@@ -853,8 +853,8 @@
Last updated: 12 May 2013
Copyright (c) 1997-2013 University of Cambridge.
------------------------------------------------------------------------------
-
-
+
+
PCREBUILD(3) Library Functions Manual PCREBUILD(3)
@@ -1356,8 +1356,8 @@
Last updated: 12 May 2013
Copyright (c) 1997-2013 University of Cambridge.
------------------------------------------------------------------------------
-
-
+
+
PCREMATCHING(3) Library Functions Manual PCREMATCHING(3)
@@ -1574,8 +1574,8 @@
Last updated: 12 November 2013
Copyright (c) 1997-2012 University of Cambridge.
------------------------------------------------------------------------------
-
-
+
+
PCREAPI(3) Library Functions Manual PCREAPI(3)
@@ -3155,7 +3155,7 @@
The default value for the limit can be set when PCRE is built; the de-
fault default is 10 million, which handles all but the most extreme
- cases. You can override the default by suppling pcre_exec() with a
+ cases. You can override the default by supplying pcre_exec() with a
pcre_extra block in which match_limit is set, and PCRE_EX-
TRA_MATCH_LIMIT is set in the flags field. If the limit is exceeded,
pcre_exec() returns PCRE_ERROR_MATCHLIMIT.
@@ -3183,7 +3183,7 @@
The default value for match_limit_recursion can be set when PCRE is
built; the default default is the same value as the default for
- match_limit. You can override the default by suppling pcre_exec() with
+ match_limit. You can override the default by supplying pcre_exec() with
a pcre_extra block in which match_limit_recursion is set, and PCRE_EX-
TRA_MATCH_LIMIT_RECURSION is set in the flags field. If the limit is
exceeded, pcre_exec() returns PCRE_ERROR_RECURSIONLIMIT.
@@ -3475,9 +3475,9 @@
which finds occurrences of "iss" in the middle of words. (\B matches
only if the current position in the subject is not a word boundary.)
- When applied to the string "Mississipi" the first call to pcre_exec()
+ When applied to the string "Mississippi" the first call to pcre_exec()
finds the first occurrence. If pcre_exec() is called again with just
- the remainder of the subject, namely "issipi", it does not match, be-
+ the remainder of the subject, namely "issippi", it does not match, be-
cause \B is always false at the start of the subject, which is deemed
to be a word boundary. However, if pcre_exec() is passed the entire
string again, but with startoffset set to 4, it finds the second occur-
@@ -4275,8 +4275,8 @@
Last updated: 18 December 2015
Copyright (c) 1997-2015 University of Cambridge.
------------------------------------------------------------------------------
-
-
+
+
PCRECALLOUT(3) Library Functions Manual PCRECALLOUT(3)
@@ -4525,8 +4525,8 @@
Last updated: 12 November 2013
Copyright (c) 1997-2013 University of Cambridge.
------------------------------------------------------------------------------
-
-
+
+
PCRECOMPAT(3) Library Functions Manual PCRECOMPAT(3)
@@ -4720,8 +4720,8 @@
Last updated: 10 November 2013
Copyright (c) 1997-2013 University of Cambridge.
------------------------------------------------------------------------------
-
-
+
+
PCREPATTERN(3) Library Functions Manual PCREPATTERN(3)
@@ -5292,11 +5292,11 @@
It is possible to restrict \R to match only CR, LF, or CRLF (instead of
the complete set of Unicode line endings) by setting the option
PCRE_BSR_ANYCRLF either at compile time or when the pattern is matched.
- (BSR is an abbrevation for "backslash R".) This can be made the default
- when PCRE is built; if this is the case, the other behaviour can be re-
- quested via the PCRE_BSR_UNICODE option. It is also possible to spec-
- ify these settings by starting a pattern string with one of the follow-
- ing sequences:
+ (BSR is an abbreviation for "backslash R".) This can be made the de-
+ fault when PCRE is built; if this is the case, the other behaviour can
+ be requested via the PCRE_BSR_UNICODE option. It is also possible to
+ specify these settings by starting a pattern string with one of the
+ following sequences:
(*BSR_ANYCRLF) CR, LF, or CRLF only
(*BSR_UNICODE) any Unicode newline sequence
@@ -5488,8 +5488,8 @@
3. Do not break Hangul (a Korean script) syllable sequences. Hangul
characters are of five types: L, V, T, LV, and LVT. An L character may
be followed by an L, V, LV, or LVT character; an LV or V character may
- be followed by a V or T character; an LVT or T character may be follwed
- only by a T character.
+ be followed by a V or T character; an LVT or T character may be fol-
+ lowed only by a T character.
4. Do not end before extending characters or spacing marks. Characters
with the "mark" property always have the "extend" grapheme breaking
@@ -7494,7 +7494,7 @@
If the subject is "aaaac...", after the first match attempt fails
(starting at the first character in the string), the starting point
skips on to start the next attempt at "c". Note that a possessive quan-
- tifer does not have the same effect as this example; although it would
+ tifier does not have the same effect as this example; although it would
suppress backtracking during the first match attempt, the second at-
tempt would start at the second character instead of skipping on to
"c".
@@ -7670,8 +7670,8 @@
Last updated: 23 October 2016
Copyright (c) 1997-2016 University of Cambridge.
------------------------------------------------------------------------------
-
-
+
+
PCRESYNTAX(3) Library Functions Manual PCRESYNTAX(3)
@@ -7793,7 +7793,7 @@
Xan Alphanumeric: union of properties L and N
Xps POSIX space: property Z or tab, NL, VT, FF, CR
Xsp Perl space: property Z or tab, NL, VT, FF, CR
- Xuc Univerally-named character: one that can be
+ Xuc Universally-named character: one that can be
represented by a Universal Character Name
Xwd Perl word: property Xan or underscore
@@ -8076,8 +8076,8 @@
Last updated: 08 January 2014
Copyright (c) 1997-2014 University of Cambridge.
------------------------------------------------------------------------------
-
-
+
+
PCREUNICODE(3) Library Functions Manual PCREUNICODE(3)
@@ -8295,8 +8295,8 @@
Last updated: 27 February 2013
Copyright (c) 1997-2013 University of Cambridge.
------------------------------------------------------------------------------
-
-
+
+
PCREJIT(3) Library Functions Manual PCREJIT(3)
@@ -8571,7 +8571,7 @@
This is a suggestion for how a multithreaded program that needs to set
up non-default JIT stacks might operate:
- During thread initalization
+ During thread initialization
thread_local_var = pcre_jit_stack_alloc(...)
During thread exit
@@ -8750,8 +8750,8 @@
Last updated: 05 July 2017
Copyright (c) 1997-2017 University of Cambridge.
------------------------------------------------------------------------------
-
-
+
+
PCREPARTIAL(3) Library Functions Manual PCREPARTIAL(3)
@@ -9235,8 +9235,8 @@
Last updated: 02 July 2013
Copyright (c) 1997-2013 University of Cambridge.
------------------------------------------------------------------------------
-
-
+
+
PCREPRECOMPILE(3) Library Functions Manual PCREPRECOMPILE(3)
@@ -9374,8 +9374,8 @@
Last updated: 12 November 2013
Copyright (c) 1997-2013 University of Cambridge.
------------------------------------------------------------------------------
-
-
+
+
PCREPERFORM(3) Library Functions Manual PCREPERFORM(3)
@@ -9544,8 +9544,8 @@
Last updated: 25 August 2012
Copyright (c) 1997-2012 University of Cambridge.
------------------------------------------------------------------------------
-
-
+
+
PCREPOSIX(3) Library Functions Manual PCREPOSIX(3)
@@ -9808,8 +9808,8 @@
Last updated: 09 January 2012
Copyright (c) 1997-2012 University of Cambridge.
------------------------------------------------------------------------------
-
-
+
+
PCRECPP(3) Library Functions Manual PCRECPP(3)
@@ -10151,8 +10151,8 @@
Last updated: 08 January 2012
------------------------------------------------------------------------------
-
-
+
+
PCRESAMPLE(3) Library Functions Manual PCRESAMPLE(3)
@@ -10305,8 +10305,8 @@
Last updated: 05 November 2013
Copyright (c) 1997-2013 University of Cambridge.
------------------------------------------------------------------------------
-
-
+
+
PCRESTACK(3) Library Functions Manual PCRESTACK(3)
@@ -10491,5 +10491,5 @@
Last updated: 24 June 2012
Copyright (c) 1997-2012 University of Cambridge.
------------------------------------------------------------------------------
-
-
+
+
Modified: code/trunk/doc/pcredemo.3
===================================================================
--- code/trunk/doc/pcredemo.3 2021-06-14 11:21:20 UTC (rev 1765)
+++ code/trunk/doc/pcredemo.3 2021-06-15 16:15:50 UTC (rev 1766)
@@ -161,7 +161,7 @@
return 1;
}
-/* Match succeded */
+/* Match succeeded */
printf("\enMatch succeeded at offset %d\en", ovector[0]);
@@ -379,7 +379,7 @@
return 1;
}
- /* Match succeded */
+ /* Match succeeded */
printf("\enMatch succeeded again at offset %d\en", ovector[0]);
Modified: code/trunk/maint/README
===================================================================
--- code/trunk/maint/README 2021-06-14 11:21:20 UTC (rev 1765)
+++ code/trunk/maint/README 2021-06-15 16:15:50 UTC (rev 1766)
@@ -343,6 +343,6 @@
"something" and the the #ifdef appears only in one place, in "something".
Philip Hazel
-Email local part: ph10
-Email domain: cam.ac.uk
-Last updated: 07 December 2012
+Email local part: Philip.Hazel
+Email domain: gmail.com
+Last updated: 07 December 2012 (email updated 15-June-2021)
Modified: code/trunk/pcre_compile.c
===================================================================
--- code/trunk/pcre_compile.c 2021-06-14 11:21:20 UTC (rev 1765)
+++ code/trunk/pcre_compile.c 2021-06-15 16:15:50 UTC (rev 1766)
@@ -9484,7 +9484,7 @@
add_name(cd, ng->name, ng->length, ng->number);
if (cd->named_group_list_size > NAMED_GROUP_LIST_SIZE)
(PUBL(free))((void *)cd->named_groups);
- cd->named_group_list_size = 0; /* So we don't free it twice */
+ cd->named_group_list_size = 0; /* So we don't free it twice */
}
/* Set up a starting, non-extracting bracket, then compile the expression. On
