[Pcre-svn] [1309] code/trunk: Final file tidies for 10.37-RC…

Top Page
Delete this message
Author: Subversion repository
Date:  
To: pcre-svn
Subject: [Pcre-svn] [1309] code/trunk: Final file tidies for 10.37-RC1
Revision: 1309
          http://www.exim.org/viewvc/pcre2?view=rev&revision=1309
Author:   ph10
Date:     2021-04-28 17:44:51 +0100 (Wed, 28 Apr 2021)
Log Message:
-----------
Final file tidies for 10.37-RC1


Modified Paths:
--------------
    code/trunk/AUTHORS
    code/trunk/ChangeLog
    code/trunk/LICENCE
    code/trunk/NEWS
    code/trunk/NON-AUTOTOOLS-BUILD
    code/trunk/README
    code/trunk/configure.ac
    code/trunk/doc/html/NON-AUTOTOOLS-BUILD.txt
    code/trunk/doc/html/README.txt
    code/trunk/doc/html/pcre2posix.html
    code/trunk/doc/html/pcre2test.html
    code/trunk/doc/pcre2.txt
    code/trunk/doc/pcre2posix.3
    code/trunk/doc/pcre2test.1
    code/trunk/src/config.h.generic
    code/trunk/src/config.h.in
    code/trunk/src/pcre2.h.generic
    code/trunk/src/pcre2_auto_possess.c
    code/trunk/src/pcre2_compile.c
    code/trunk/src/pcre2_match.c
    code/trunk/src/pcre2posix.c


Modified: code/trunk/AUTHORS
===================================================================
--- code/trunk/AUTHORS    2021-04-28 15:37:48 UTC (rev 1308)
+++ code/trunk/AUTHORS    2021-04-28 16:44:51 UTC (rev 1309)
@@ -8,7 +8,7 @@
 University of Cambridge Computing Service,
 Cambridge, England.


-Copyright (c) 1997-2020 University of Cambridge
+Copyright (c) 1997-2021 University of Cambridge
All rights reserved


@@ -19,7 +19,7 @@
 Email local part: hzmester
 Emain domain:     freemail.hu


-Copyright(c) 2010-2020 Zoltan Herczeg
+Copyright(c) 2010-2021 Zoltan Herczeg
All rights reserved.


@@ -30,7 +30,7 @@
 Email local part: hzmester
 Emain domain:     freemail.hu


-Copyright(c) 2009-2020 Zoltan Herczeg
+Copyright(c) 2009-2021 Zoltan Herczeg
All rights reserved.

####

Modified: code/trunk/ChangeLog
===================================================================
--- code/trunk/ChangeLog    2021-04-28 15:37:48 UTC (rev 1308)
+++ code/trunk/ChangeLog    2021-04-28 16:44:51 UTC (rev 1309)
@@ -2,38 +2,38 @@
 --------------------



-Version 10.37-RC1 xx-xxxx-2021
----------------------------------
+Version 10.37-RC1 28-April-2021
+-------------------------------

-1. Change RunGrepTest to use tr instead of sed when testing with binary
-zero bytes, because sed varies a lot from system to system and has problems
-with binary zeros. This is from Bugzilla #2681. Patch from Jeremie
-Courreges-Anglas via Nam Nguyen. This fixes RunGrepTest for OpenBSD. Later:
-it broke it for at least one version of Solaris, where tr can't handle binary
-zeros. However, that system had /usr/xpg4/bin/tr installed, which works OK, so
+1. Change RunGrepTest to use tr instead of sed when testing with binary
+zero bytes, because sed varies a lot from system to system and has problems
+with binary zeros. This is from Bugzilla #2681. Patch from Jeremie
+Courreges-Anglas via Nam Nguyen. This fixes RunGrepTest for OpenBSD. Later:
+it broke it for at least one version of Solaris, where tr can't handle binary
+zeros. However, that system had /usr/xpg4/bin/tr installed, which works OK, so
RunGrepTest now checks for that command and uses it if found.

-2. Compiling with gcc 10.2's -fanalyzer option showed up a hypothetical problem
-with a NULL dereference. I don't think this case could ever occur in practice,
+2. Compiling with gcc 10.2's -fanalyzer option showed up a hypothetical problem
+with a NULL dereference. I don't think this case could ever occur in practice,
but I have put in a check in order to get rid of the compiler error.

3. An alternative patch for CMakeLists.txt because 10.36 #4 breaks CMake on
Windows. Patch from email@??? fixes bugzilla #2688.

-4. Two bugs related to over-large numbers have been fixed so the behaviour is
+4. Two bugs related to over-large numbers have been fixed so the behaviour is
now the same as Perl.
-
- (a) A pattern such as /\214748364/ gave an overflow error instead of being
+
+ (a) A pattern such as /\214748364/ gave an overflow error instead of being
treated as the octal number \214 followed by literal digits.
-
- (b) A sequence such as {65536 that has no terminating } so is not a
+
+ (b) A sequence such as {65536 that has no terminating } so is not a
quantifier was nevertheless complaining that a quantifier number was too big.

5. A run of autoconf suggested that configure.ac was out-of-date with respect
to the lastest autoconf. Running autoupdate made some valid changes, some valid
-suggestions, and also some invalid changes, which were fixed by hand. Autoconf
-now runs clean and the resulting "configure" seems to work, so I hope nothing
-is broken. Later: the requirement for autoconf 2.70 broke some automatic test
+suggestions, and also some invalid changes, which were fixed by hand. Autoconf
+now runs clean and the resulting "configure" seems to work, so I hope nothing
+is broken. Later: the requirement for autoconf 2.70 broke some automatic test
robots. It doesn't seem to be necessary: trying a reduction to 2.60.

6. The pattern /a\K.(?0)*/ when matched against "abac" by the interpreter gave
@@ -45,12 +45,12 @@
character repetitions are optimized than in 10.34.

8. When the names of the functions in the POSIX wrapper were changed to
-pcre2_regcomp() etc. (see change 10.33 #4 below), functions with the original
-names were left in the library so that pre-compiled programs would still work.
-However, this has proved troublesome when programs link with several libraries,
-some of which use PCRE2 via the POSIX interface while others use a native POSIX
+pcre2_regcomp() etc. (see change 10.33 #4 below), functions with the original
+names were left in the library so that pre-compiled programs would still work.
+However, this has proved troublesome when programs link with several libraries,
+some of which use PCRE2 via the POSIX interface while others use a native POSIX
library. For this reason, the POSIX function names are removed in this release.
-The macros in pcre2posix.h should ensure that re-compiling fixes any programs
+The macros in pcre2posix.h should ensure that re-compiling fixes any programs
that haven't been compiled since before 10.33.



Modified: code/trunk/LICENCE
===================================================================
--- code/trunk/LICENCE    2021-04-28 15:37:48 UTC (rev 1308)
+++ code/trunk/LICENCE    2021-04-28 16:44:51 UTC (rev 1309)
@@ -26,7 +26,7 @@
 University of Cambridge Computing Service,
 Cambridge, England.


-Copyright (c) 1997-2020 University of Cambridge
+Copyright (c) 1997-2021 University of Cambridge
All rights reserved.


@@ -37,7 +37,7 @@
 Email local part: hzmester
 Email domain:     freemail.hu


-Copyright(c) 2010-2020 Zoltan Herczeg
+Copyright(c) 2010-2021 Zoltan Herczeg
All rights reserved.


@@ -48,7 +48,7 @@
 Email local part: hzmester
 Email domain:     freemail.hu


-Copyright(c) 2009-2020 Zoltan Herczeg
+Copyright(c) 2009-2021 Zoltan Herczeg
All rights reserved.



Modified: code/trunk/NEWS
===================================================================
--- code/trunk/NEWS    2021-04-28 15:37:48 UTC (rev 1308)
+++ code/trunk/NEWS    2021-04-28 16:44:51 UTC (rev 1309)
@@ -2,6 +2,14 @@
 -------------------------



+Version 10.37-RC1 28_April-2021
+-------------------------------
+
+A few more bug fixes and tidies. The only change of real note is the removal of
+the actual POSIX names regcomp etc. from the POSIX wrapper library because
+these have caused issues for some applications (see 10.33 #2 below).
+
+
Version 10.36 04-December-2020
------------------------------


Modified: code/trunk/NON-AUTOTOOLS-BUILD
===================================================================
--- code/trunk/NON-AUTOTOOLS-BUILD    2021-04-28 15:37:48 UTC (rev 1308)
+++ code/trunk/NON-AUTOTOOLS-BUILD    2021-04-28 16:44:51 UTC (rev 1309)
@@ -40,9 +40,9 @@


The following are generic instructions for building the PCRE2 C library "by
hand". If you are going to use CMake, this section does not apply to you; you
-can skip ahead to the CMake section. Note that the settings concerned with
-8-bit, 16-bit, and 32-bit code units relate to the type of data string that
-PCRE2 processes. They are NOT referring to the underlying operating system bit
+can skip ahead to the CMake section. Note that the settings concerned with
+8-bit, 16-bit, and 32-bit code units relate to the type of data string that
+PCRE2 processes. They are NOT referring to the underlying operating system bit
width. You do not have to do anything special to compile in a 64-bit
environment, for example.

@@ -90,7 +90,7 @@
      The tables in src/pcre2_chartables.c are defaults. The caller of PCRE2 can
      specify alternative tables at run time.


- (4) For a library that supports 8-bit code units in the character strings that 
+ (4) For a library that supports 8-bit code units in the character strings that
      it processes, compile the following source files from the src directory,
      setting -DPCRE2_CODE_UNIT_WIDTH=8 as a compiler option. Also set
      -DHAVE_CONFIG_H if you have set up src/config.h with your configuration,


Modified: code/trunk/README
===================================================================
--- code/trunk/README    2021-04-28 15:37:48 UTC (rev 1308)
+++ code/trunk/README    2021-04-28 16:44:51 UTC (rev 1309)
@@ -4,16 +4,17 @@
 PCRE2 is a re-working of the original PCRE1 library to provide an entirely new
 API. Since its initial release in 2015, there has been further development of
 the code and it now differs from PCRE1 in more than just the API. There are new
-features and the internals have been improved. The latest release of PCRE2 is
-available in three alternative formats from:
+features, and the internals have been improved. The original PCRE1 library is
+now obsolete and should not be used in new projects. The latest release of
+PCRE2 is available in three alternative formats from:


https://ftp.pcre.org/pub/pcre/pcre2-10.xx.tar.gz
https://ftp.pcre.org/pub/pcre/pcre2-10.xx.tar.bz2
https://ftp.pcre.org/pub/pcre/pcre2-10.xx.tar.zip

-There is a mailing list for discussion about the development of PCRE (both the
-original and new APIs) at pcre-dev@???. You can access the archives and
-subscribe or manage your subscription here:
+There is a mailing list for discussion about the development of PCRE at
+pcre-dev@???. You can access the archives and subscribe or manage your
+subscription here:

    https://lists.exim.org/mailman/listinfo/pcre-dev


@@ -903,4 +904,4 @@
Philip Hazel
Email local part: Philip.Hazel
Email domain: gmail.com
-Last updated: 04 December 2020
+Last updated: 28 April 2021

Modified: code/trunk/configure.ac
===================================================================
--- code/trunk/configure.ac    2021-04-28 15:37:48 UTC (rev 1308)
+++ code/trunk/configure.ac    2021-04-28 16:44:51 UTC (rev 1309)
@@ -11,13 +11,13 @@
 m4_define(pcre2_major, [10])
 m4_define(pcre2_minor, [37])
 m4_define(pcre2_prerelease, [-RC1])
-m4_define(pcre2_date, [2021-02-02])
+m4_define(pcre2_date, [2021-04-28])


 # Libtool shared library interface versions (current:revision:age)
-m4_define(libpcre2_8_version,     [10:1:10])
-m4_define(libpcre2_16_version,    [10:1:10])
-m4_define(libpcre2_32_version,    [10:1:10])
-m4_define(libpcre2_posix_version, [2:3:0])
+m4_define(libpcre2_8_version,     [10:2:10])
+m4_define(libpcre2_16_version,    [10:2:10])
+m4_define(libpcre2_32_version,    [10:2:10])
+m4_define(libpcre2_posix_version, [3:0:0])


# NOTE: The CMakeLists.txt file searches for the above variables in the first
# 50 lines of this file. Please update that if the variables above are moved.

Modified: code/trunk/doc/html/NON-AUTOTOOLS-BUILD.txt
===================================================================
--- code/trunk/doc/html/NON-AUTOTOOLS-BUILD.txt    2021-04-28 15:37:48 UTC (rev 1308)
+++ code/trunk/doc/html/NON-AUTOTOOLS-BUILD.txt    2021-04-28 16:44:51 UTC (rev 1309)
@@ -40,9 +40,9 @@


The following are generic instructions for building the PCRE2 C library "by
hand". If you are going to use CMake, this section does not apply to you; you
-can skip ahead to the CMake section. Note that the settings concerned with
-8-bit, 16-bit, and 32-bit code units relate to the type of data string that
-PCRE2 processes. They are NOT referring to the underlying operating system bit
+can skip ahead to the CMake section. Note that the settings concerned with
+8-bit, 16-bit, and 32-bit code units relate to the type of data string that
+PCRE2 processes. They are NOT referring to the underlying operating system bit
width. You do not have to do anything special to compile in a 64-bit
environment, for example.

@@ -90,7 +90,7 @@
      The tables in src/pcre2_chartables.c are defaults. The caller of PCRE2 can
      specify alternative tables at run time.


- (4) For a library that supports 8-bit code units in the character strings that 
+ (4) For a library that supports 8-bit code units in the character strings that
      it processes, compile the following source files from the src directory,
      setting -DPCRE2_CODE_UNIT_WIDTH=8 as a compiler option. Also set
      -DHAVE_CONFIG_H if you have set up src/config.h with your configuration,


Modified: code/trunk/doc/html/README.txt
===================================================================
--- code/trunk/doc/html/README.txt    2021-04-28 15:37:48 UTC (rev 1308)
+++ code/trunk/doc/html/README.txt    2021-04-28 16:44:51 UTC (rev 1309)
@@ -4,16 +4,17 @@
 PCRE2 is a re-working of the original PCRE1 library to provide an entirely new
 API. Since its initial release in 2015, there has been further development of
 the code and it now differs from PCRE1 in more than just the API. There are new
-features and the internals have been improved. The latest release of PCRE2 is
-available in three alternative formats from:
+features, and the internals have been improved. The original PCRE1 library is
+now obsolete and should not be used in new projects. The latest release of
+PCRE2 is available in three alternative formats from:


https://ftp.pcre.org/pub/pcre/pcre2-10.xx.tar.gz
https://ftp.pcre.org/pub/pcre/pcre2-10.xx.tar.bz2
https://ftp.pcre.org/pub/pcre/pcre2-10.xx.tar.zip

-There is a mailing list for discussion about the development of PCRE (both the
-original and new APIs) at pcre-dev@???. You can access the archives and
-subscribe or manage your subscription here:
+There is a mailing list for discussion about the development of PCRE at
+pcre-dev@???. You can access the archives and subscribe or manage your
+subscription here:

    https://lists.exim.org/mailman/listinfo/pcre-dev


@@ -903,4 +904,4 @@
Philip Hazel
Email local part: Philip.Hazel
Email domain: gmail.com
-Last updated: 04 December 2020
+Last updated: 28 April 2021

Modified: code/trunk/doc/html/pcre2posix.html
===================================================================
--- code/trunk/doc/html/pcre2posix.html    2021-04-28 15:37:48 UTC (rev 1308)
+++ code/trunk/doc/html/pcre2posix.html    2021-04-28 16:44:51 UTC (rev 1309)
@@ -73,8 +73,8 @@
 <b>regcomp()</b> etc. These simply passed their arguments to the PCRE2
 functions. These functions were provided for backwards compatibility with
 earlier versions of PCRE2, which had only POSIX names. However, this has proved
-troublesome in situations where a program links with several libraries, some of 
-which use PCRE2's POSIX interface while others use the real POSIX functions. 
+troublesome in situations where a program links with several libraries, some of
+which use PCRE2's POSIX interface while others use the real POSIX functions.
 For this reason, the POSIX names have been removed since release 10.37.
 </P>
 <P>


Modified: code/trunk/doc/html/pcre2test.html
===================================================================
--- code/trunk/doc/html/pcre2test.html    2021-04-28 15:37:48 UTC (rev 1308)
+++ code/trunk/doc/html/pcre2test.html    2021-04-28 16:44:51 UTC (rev 1309)
@@ -1421,8 +1421,8 @@
 a modifier. This is not thought to be an issue in a test program.
 </P>
 <P>
-Specifying a completely empty replacement string disables this modifier. 
-However, it is possible to specify an empty replacement by providing a buffer 
+Specifying a completely empty replacement string disables this modifier.
+However, it is possible to specify an empty replacement by providing a buffer
 length, as described below, for an otherwise empty replacement.
 </P>
 <P>


Modified: code/trunk/doc/pcre2.txt
===================================================================
--- code/trunk/doc/pcre2.txt    2021-04-28 15:37:48 UTC (rev 1308)
+++ code/trunk/doc/pcre2.txt    2021-04-28 16:44:51 UTC (rev 1309)
@@ -185,8 +185,8 @@
        Last updated: 28 April 2021
        Copyright (c) 1997-2021 University of Cambridge.
 ------------------------------------------------------------------------------
- 
- 
+
+
 PCRE2API(3)                Library Functions Manual                PCRE2API(3)



@@ -3834,8 +3834,8 @@
        Last updated: 04 November 2020
        Copyright (c) 1997-2020 University of Cambridge.
 ------------------------------------------------------------------------------
- 
- 
+
+
 PCRE2BUILD(3)              Library Functions Manual              PCRE2BUILD(3)



@@ -4428,8 +4428,8 @@
        Last updated: 20 March 2020
        Copyright (c) 1997-2020 University of Cambridge.
 ------------------------------------------------------------------------------
- 
- 
+
+
 PCRE2CALLOUT(3)            Library Functions Manual            PCRE2CALLOUT(3)



@@ -4858,8 +4858,8 @@
        Last updated: 03 February 2019
        Copyright (c) 1997-2019 University of Cambridge.
 ------------------------------------------------------------------------------
- 
- 
+
+
 PCRE2COMPAT(3)             Library Functions Manual             PCRE2COMPAT(3)



@@ -5071,8 +5071,8 @@
        Last updated: 06 October 2020
        Copyright (c) 1997-2019 University of Cambridge.
 ------------------------------------------------------------------------------
- 
- 
+
+
 PCRE2JIT(3)                Library Functions Manual                PCRE2JIT(3)



@@ -5496,8 +5496,8 @@
        Last updated: 23 May 2019
        Copyright (c) 1997-2019 University of Cambridge.
 ------------------------------------------------------------------------------
- 
- 
+
+
 PCRE2LIMITS(3)             Library Functions Manual             PCRE2LIMITS(3)



@@ -5566,8 +5566,8 @@
        Last updated: 02 February 2019
        Copyright (c) 1997-2019 University of Cambridge.
 ------------------------------------------------------------------------------
- 
- 
+
+
 PCRE2MATCHING(3)           Library Functions Manual           PCRE2MATCHING(3)



@@ -5790,8 +5790,8 @@
        Last updated: 23 May 2019
        Copyright (c) 1997-2019 University of Cambridge.
 ------------------------------------------------------------------------------
- 
- 
+
+
 PCRE2PARTIAL(3)            Library Functions Manual            PCRE2PARTIAL(3)



@@ -6170,8 +6170,8 @@
        Last updated: 04 September 2019
        Copyright (c) 1997-2019 University of Cambridge.
 ------------------------------------------------------------------------------
- 
- 
+
+
 PCRE2PATTERN(3)            Library Functions Manual            PCRE2PATTERN(3)



@@ -9618,8 +9618,8 @@
        Last updated: 06 October 2020
        Copyright (c) 1997-2020 University of Cambridge.
 ------------------------------------------------------------------------------
- 
- 
+
+
 PCRE2PERFORM(3)            Library Functions Manual            PCRE2PERFORM(3)



@@ -9853,8 +9853,8 @@
        Last updated: 03 February 2019
        Copyright (c) 1997-2019 University of Cambridge.
 ------------------------------------------------------------------------------
- 
- 
+
+
 PCRE2POSIX(3)              Library Functions Manual              PCRE2POSIX(3)



@@ -10187,8 +10187,8 @@
        Last updated: 26 April 2021
        Copyright (c) 1997-2021 University of Cambridge.
 ------------------------------------------------------------------------------
- 
- 
+
+
 PCRE2SAMPLE(3)             Library Functions Manual             PCRE2SAMPLE(3)



@@ -10466,8 +10466,8 @@
        Last updated: 27 June 2018
        Copyright (c) 1997-2018 University of Cambridge.
 ------------------------------------------------------------------------------
- 
- 
+
+
 PCRE2SYNTAX(3)             Library Functions Manual             PCRE2SYNTAX(3)



@@ -10982,8 +10982,8 @@
        Last updated: 28 December 2019
        Copyright (c) 1997-2019 University of Cambridge.
 ------------------------------------------------------------------------------
- 
- 
+
+
 PCRE2UNICODE(3)            Library Functions Manual            PCRE2UNICODE(3)



@@ -11417,5 +11417,5 @@
        Last updated: 23 February 2020
        Copyright (c) 1997-2020 University of Cambridge.
 ------------------------------------------------------------------------------
- 
- 
+
+


Modified: code/trunk/doc/pcre2posix.3
===================================================================
--- code/trunk/doc/pcre2posix.3    2021-04-28 15:37:48 UTC (rev 1308)
+++ code/trunk/doc/pcre2posix.3    2021-04-28 16:44:51 UTC (rev 1309)
@@ -49,8 +49,8 @@
 \fBregcomp()\fP etc. These simply passed their arguments to the PCRE2
 functions. These functions were provided for backwards compatibility with
 earlier versions of PCRE2, which had only POSIX names. However, this has proved
-troublesome in situations where a program links with several libraries, some of 
-which use PCRE2's POSIX interface while others use the real POSIX functions. 
+troublesome in situations where a program links with several libraries, some of
+which use PCRE2's POSIX interface while others use the real POSIX functions.
 For this reason, the POSIX names have been removed since release 10.37.
 .P
 Calling the header file \fBpcre2posix.h\fP avoids any conflict with other POSIX


Modified: code/trunk/doc/pcre2test.1
===================================================================
--- code/trunk/doc/pcre2test.1    2021-04-28 15:37:48 UTC (rev 1308)
+++ code/trunk/doc/pcre2test.1    2021-04-28 16:44:51 UTC (rev 1309)
@@ -1389,8 +1389,8 @@
 replacement strings cannot contain commas, because a comma signifies the end of
 a modifier. This is not thought to be an issue in a test program.
 .P
-Specifying a completely empty replacement string disables this modifier. 
-However, it is possible to specify an empty replacement by providing a buffer 
+Specifying a completely empty replacement string disables this modifier.
+However, it is possible to specify an empty replacement by providing a buffer
 length, as described below, for an otherwise empty replacement.
 .P
 Unlike subject strings, \fBpcre2test\fP does not process replacement strings


Modified: code/trunk/src/config.h.generic
===================================================================
--- code/trunk/src/config.h.generic    2021-04-28 15:37:48 UTC (rev 1308)
+++ code/trunk/src/config.h.generic    2021-04-28 16:44:51 UTC (rev 1309)
@@ -85,8 +85,8 @@
 /* Define to 1 if you have the `memmove' function. */
 /* #undef HAVE_MEMMOVE */


-/* Define to 1 if you have the <memory.h> header file. */
-/* #undef HAVE_MEMORY_H */
+/* Define to 1 if you have the <minix/config.h> header file. */
+/* #undef HAVE_MINIX_CONFIG_H */

/* Define to 1 if you have the `mkostemp' function. */
/* #undef HAVE_MKOSTEMP */
@@ -109,6 +109,9 @@
/* Define to 1 if you have the <stdint.h> header file. */
/* #undef HAVE_STDINT_H */

+/* Define to 1 if you have the <stdio.h> header file. */
+/* #undef HAVE_STDIO_H */
+
/* Define to 1 if you have the <stdlib.h> header file. */
/* #undef HAVE_STDLIB_H */

@@ -136,6 +139,9 @@
/* Define to 1 if the compiler supports simple visibility declarations. */
/* #undef HAVE_VISIBILITY */

+/* Define to 1 if you have the <wchar.h> header file. */
+/* #undef HAVE_WCHAR_H */
+
/* Define to 1 if you have the <windows.h> header file. */
/* #undef HAVE_WINDOWS_H */

@@ -224,7 +230,7 @@
#define PACKAGE_NAME "PCRE2"

/* Define to the full name and version of this package. */
-#define PACKAGE_STRING "PCRE2 10.36"
+#define PACKAGE_STRING "PCRE2 10.37-RC1"

/* Define to the one symbol short name of this package. */
#define PACKAGE_TARNAME "pcre2"
@@ -233,7 +239,7 @@
#define PACKAGE_URL ""

/* Define to the version of this package. */
-#define PACKAGE_VERSION "10.36"
+#define PACKAGE_VERSION "10.37-RC1"

 /* The value of PARENS_NEST_LIMIT specifies the maximum depth of nested
    parentheses (of any kind) in a pattern. This limits the amount of system
@@ -286,7 +292,9 @@
    unless SUPPORT_JIT is also defined. */
 /* #undef SLJIT_PROT_EXECUTABLE_ALLOCATOR */


-/* Define to 1 if you have the ANSI C header files. */
+/* Define to 1 if all of the C90 standard headers exist (not just the ones
+ required in a freestanding environment). This macro is provided for
+ backward compatibility; new code need not use it. */
/* #undef STDC_HEADERS */

/* Define to any value to enable support for Just-In-Time compiling. */
@@ -340,36 +348,92 @@
#ifndef _ALL_SOURCE
# define _ALL_SOURCE 1
#endif
+/* Enable general extensions on macOS. */
+#ifndef _DARWIN_C_SOURCE
+# define _DARWIN_C_SOURCE 1
+#endif
+/* Enable general extensions on Solaris. */
+#ifndef __EXTENSIONS__
+# define __EXTENSIONS__ 1
+#endif
/* Enable GNU extensions on systems that have them. */
#ifndef _GNU_SOURCE
# define _GNU_SOURCE 1
#endif
-/* Enable threading extensions on Solaris. */
+/* Enable X/Open compliant socket functions that do not require linking
+ with -lxnet on HP-UX 11.11. */
+#ifndef _HPUX_ALT_XOPEN_SOCKET_API
+# define _HPUX_ALT_XOPEN_SOCKET_API 1
+#endif
+/* Identify the host operating system as Minix.
+ This macro does not affect the system headers' behavior.
+ A future release of Autoconf may stop defining this macro. */
+#ifndef _MINIX
+/* # undef _MINIX */
+#endif
+/* Enable general extensions on NetBSD.
+ Enable NetBSD compatibility extensions on Minix. */
+#ifndef _NETBSD_SOURCE
+# define _NETBSD_SOURCE 1
+#endif
+/* Enable OpenBSD compatibility extensions on NetBSD.
+ Oddly enough, this does nothing on OpenBSD. */
+#ifndef _OPENBSD_SOURCE
+# define _OPENBSD_SOURCE 1
+#endif
+/* Define to 1 if needed for POSIX-compatible behavior. */
+#ifndef _POSIX_SOURCE
+/* # undef _POSIX_SOURCE */
+#endif
+/* Define to 2 if needed for POSIX-compatible behavior. */
+#ifndef _POSIX_1_SOURCE
+/* # undef _POSIX_1_SOURCE */
+#endif
+/* Enable POSIX-compatible threading on Solaris. */
#ifndef _POSIX_PTHREAD_SEMANTICS
# define _POSIX_PTHREAD_SEMANTICS 1
#endif
+/* Enable extensions specified by ISO/IEC TS 18661-5:2014. */
+#ifndef __STDC_WANT_IEC_60559_ATTRIBS_EXT__
+# define __STDC_WANT_IEC_60559_ATTRIBS_EXT__ 1
+#endif
+/* Enable extensions specified by ISO/IEC TS 18661-1:2014. */
+#ifndef __STDC_WANT_IEC_60559_BFP_EXT__
+# define __STDC_WANT_IEC_60559_BFP_EXT__ 1
+#endif
+/* Enable extensions specified by ISO/IEC TS 18661-2:2015. */
+#ifndef __STDC_WANT_IEC_60559_DFP_EXT__
+# define __STDC_WANT_IEC_60559_DFP_EXT__ 1
+#endif
+/* Enable extensions specified by ISO/IEC TS 18661-4:2015. */
+#ifndef __STDC_WANT_IEC_60559_FUNCS_EXT__
+# define __STDC_WANT_IEC_60559_FUNCS_EXT__ 1
+#endif
+/* Enable extensions specified by ISO/IEC TS 18661-3:2015. */
+#ifndef __STDC_WANT_IEC_60559_TYPES_EXT__
+# define __STDC_WANT_IEC_60559_TYPES_EXT__ 1
+#endif
+/* Enable extensions specified by ISO/IEC TR 24731-2:2010. */
+#ifndef __STDC_WANT_LIB_EXT2__
+# define __STDC_WANT_LIB_EXT2__ 1
+#endif
+/* Enable extensions specified by ISO/IEC 24747:2009. */
+#ifndef __STDC_WANT_MATH_SPEC_FUNCS__
+# define __STDC_WANT_MATH_SPEC_FUNCS__ 1
+#endif
/* Enable extensions on HP NonStop. */
#ifndef _TANDEM_SOURCE
# define _TANDEM_SOURCE 1
#endif
-/* Enable general extensions on Solaris. */
-#ifndef __EXTENSIONS__
-# define __EXTENSIONS__ 1
+/* Enable X/Open extensions. Define to 500 only if necessary
+ to make mbstate_t available. */
+#ifndef _XOPEN_SOURCE
+/* # undef _XOPEN_SOURCE */
#endif

/* Version number of package */
-#define VERSION "10.36"
+#define VERSION "10.37-RC1"

-/* Define to 1 if on MINIX. */
-/* #undef _MINIX */
-
-/* Define to 2 if the system does not provide POSIX.1 features except with
- this defined. */
-/* #undef _POSIX_1_SOURCE */
-
-/* Define to 1 if you need to in order for `stat' and other things to work. */
-/* #undef _POSIX_SOURCE */
-
/* Define to empty if `const' does not conform to ANSI C. */
/* #undef const */


Modified: code/trunk/src/config.h.in
===================================================================
--- code/trunk/src/config.h.in    2021-04-28 15:37:48 UTC (rev 1308)
+++ code/trunk/src/config.h.in    2021-04-28 16:44:51 UTC (rev 1309)
@@ -347,6 +347,11 @@
 #ifndef _GNU_SOURCE
 # undef _GNU_SOURCE
 #endif
+/* Enable X/Open compliant socket functions that do not require linking
+   with -lxnet on HP-UX 11.11.  */
+#ifndef _HPUX_ALT_XOPEN_SOCKET_API
+# undef _HPUX_ALT_XOPEN_SOCKET_API
+#endif
 /* Identify the host operating system as Minix.
    This macro does not affect the system headers' behavior.
    A future release of Autoconf may stop defining this macro.  */


Modified: code/trunk/src/pcre2.h.generic
===================================================================
--- code/trunk/src/pcre2.h.generic    2021-04-28 15:37:48 UTC (rev 1308)
+++ code/trunk/src/pcre2.h.generic    2021-04-28 16:44:51 UTC (rev 1309)
@@ -42,9 +42,9 @@
 /* The current PCRE version information. */


 #define PCRE2_MAJOR           10
-#define PCRE2_MINOR           36
-#define PCRE2_PRERELEASE      
-#define PCRE2_DATE            2020-12-04
+#define PCRE2_MINOR           37
+#define PCRE2_PRERELEASE      -RC1
+#define PCRE2_DATE            2021-04-28


/* When an application links to a PCRE DLL in Windows, the symbols that are
imported have to be identified as such. When building PCRE2, the appropriate

Modified: code/trunk/src/pcre2_auto_possess.c
===================================================================
--- code/trunk/src/pcre2_auto_possess.c    2021-04-28 15:37:48 UTC (rev 1308)
+++ code/trunk/src/pcre2_auto_possess.c    2021-04-28 16:44:51 UTC (rev 1309)
@@ -1188,10 +1188,10 @@
     if (c >= OP_CRSTAR && c <= OP_CRMINRANGE)
       {
       /* The return from get_chr_property_list() will never be NULL when
-      *code (aka c) is one of the three class opcodes. However, gcc with 
-      -fanalyzer notes that a NULL return is possible, and grumbles. Hence we 
-      put in a check. */ 
-       
+      *code (aka c) is one of the three class opcodes. However, gcc with
+      -fanalyzer notes that a NULL return is possible, and grumbles. Hence we
+      put in a check. */
+
       end = get_chr_property_list(code, utf, ucp, cb->fcc, list);
       list[1] = (c & 1) == 0;



Modified: code/trunk/src/pcre2_compile.c
===================================================================
--- code/trunk/src/pcre2_compile.c    2021-04-28 15:37:48 UTC (rev 1308)
+++ code/trunk/src/pcre2_compile.c    2021-04-28 16:44:51 UTC (rev 1309)
@@ -1419,7 +1419,7 @@
     if (had_comma) return FALSE;
     had_comma = TRUE;
     }
-  else return FALSE;   
+  else return FALSE;
   }


/* The only error from read_number() is for a number that is too big. */

Modified: code/trunk/src/pcre2_match.c
===================================================================
--- code/trunk/src/pcre2_match.c    2021-04-28 15:37:48 UTC (rev 1308)
+++ code/trunk/src/pcre2_match.c    2021-04-28 16:44:51 UTC (rev 1309)
@@ -823,7 +823,7 @@


       P->eptr = Feptr;
       P->mark = Fmark;
-      P->start_match = Fstart_match; 
+      P->start_match = Fstart_match;
       F = P;
       Fecode += 1 + LINK_SIZE;
       continue;


Modified: code/trunk/src/pcre2posix.c
===================================================================
--- code/trunk/src/pcre2posix.c    2021-04-28 15:37:48 UTC (rev 1308)
+++ code/trunk/src/pcre2posix.c    2021-04-28 16:44:51 UTC (rev 1309)
@@ -178,13 +178,13 @@
 #if 0  /* REMOVE THIS CODE */


The code below was created for 10.33 (see ChangeLog 10.33 #4) when the
-POSIX functions were given pcre2_... names instead of the traditional POSIX
+POSIX functions were given pcre2_... names instead of the traditional POSIX
names. However, it has proved to be more troublesome than useful. There have
been at least two cases where a program links with two others, one of which
uses the POSIX library and the other uses the PCRE2 POSIX functions, thus
causing two instances of the POSIX runctions to exist, leading to trouble. For
10.37 this code is commented out. In due course it can be removed if there are
-no issues. The only small worry is the comment below about languages that do
+no issues. The only small worry is the comment below about languages that do
not include pcre2posix.h. If there are any such cases, they will have to use
the PCRE2 names.