Re: [pcre-dev] PCRE2 10.35 testing issues on Windows

Pàgina inicial
Delete this message
Autor: Ze'ev Atlas
Data:  
A: Daniel Richard G., Philip Hazel
CC: pcre-dev@exim.org
Assumpte: Re: [pcre-dev] PCRE2 10.35 testing issues on Windows
Hi PhilI see that this involved an open file command which means that you have to supply the filename, potentially fully qualified filename.  That brings a few questions:
1. Why should the onus of fixing this be on you rather than on the user, who should supply a fully qualified file name?
2. The file loaded is in binary format, so it should not be the source code directory that is passed to pcre2test but the binary directory, unless, of course if it is the same one in your OS and build setting (which cannot be in native z/OS)
Ze'ev Atlas


    On Saturday, November 21, 2020, 11:28:46 AM EST, Philip Hazel via Pcre-dev <pcre-dev@???> wrote:  


Thank you for reporting this. It turns out not to be Windows-specific, so I
can't use the "I'm not a Windows user" excuse. The same problem occurs when
building in a directory well out of the source directory on Linux. However,
a bug in the RunTest script prevented this failure from being reported, so
"make check" ran clean when it should not have. *That* bug is easily fixed,
but I am still pondering what to do about testing the #loadtables feature
of pcre2test. I will have to invent some way of passing the source
directory into pcre2test, or, alternatively, copying the relevant file into
the current directory before running the test, which might be the way to
go. This is quite timely, because 10.36-RC1 is currently available for
testing so it would be good to get this fixed before the actual 10.36
release.
Regards,
Philip


On Fri, 20 Nov 2020 at 10:29, Daniel Richard G. <skunk@???> wrote:

> Hello list,
>
> I'd like to report a couple issues I encountered in building PCRE2 10.35
> on Windows, specifically when it came to running the test suite.
>
> The first indication was a failed pcre2_test_bat:
>
>    Test project C:/build/pcre/pcre2-10.35/build-test
>        Start 1: pcre2_test_bat
>    1/2 Test #1: pcre2_test_bat ...................***Failed  Required
> regular expression not found. Regex=[RunTest\.bat tests successfully
> completed
>    ]  0.06 sec
>        Start 2: pcre2_jit_test
>    2/2 Test #2: pcre2_jit_test ...................  Passed    8.37 sec
>
> I tried running pcre2_test.bat directly, and got this:
>
>    C:\build\pcre\pcre2-10.35\build-test>pcre2_test.bat
>    source dir is "C:\build\pcre\pcre2-10.35"
>    pcre2test="$<TARGET_FILE:pcre2test>"
>    Error: "$<TARGET_FILE:pcre2test>" not found
>
>    Either your build is incomplete or you have a configuration error.
>
>    If configured with cmake and executed via "make test" or the MSVC
> "RUN_TESTS"
>    project, pcre2_test.bat defines variables and automatically calls
> RunTest.bat.
>    (remainder of text elided)
>
> This was the content of the batch file:
>
>    C:\build\pcre\pcre2-10.35\build-test>more pcre2_test.bat
>    @REM This is a generated file.
>    @echo off
>    setlocal
>    SET srcdir="C:\build\pcre\pcre2-10.35"
>    SET pcre2test="$<TARGET_FILE:pcre2test>"
>    if not [%CMAKE_CONFIG_TYPE%]==[] SET
> pcre2test="C:\build\pcre\pcre2-10.35\build-test\%CMAKE_CONFIG_TYPE%\pcre2test.exe"
>    call %srcdir%\RunTest.Bat
>    if errorlevel 1 exit /b 1
>    echo RunTest.bat tests successfully completed
>
> $<TARGET_FILE:pcre2test> is a CMake directive that apparently didn't
> work. (I was using CMake 3.18.4.)
>
> I edited the batch file to use
>
>    SET pcre2test="C:\build\pcre\pcre2-10.35\build-test\pcre2test.exe"
>
> and tried again. Now, I saw a different error:
>
>    Test 2: "API, errors, internals, and non-Perl stuff"
>              failed executing command-line:
>                "C:\build\pcre\pcre2-10.35\build-test\pcre2test.exe"  -q
>    "C:\build\pcre\pcre2-10.35"\testdata\testinput2 >testout8\testoutput2
>    Test 2: "Test with JIT Override"
>              failed executing command-line:
>                "C:\build\pcre\pcre2-10.35\build-test\pcre2test.exe"  -q
> -jit    "C:\build\pcre\pcre2-10.35"\testdata\testinput2
> >testoutjit8\testoutput2
>
> (Same error for the 16-bit and 32-bit libraries.)
>
> I looked at the end of testoutput2, and saw this telltale:
>
>    #loadtables ./testdata/testbtables
>    ** Failed to open './testdata/testbtables': No such file or directory
>    ** pcre2test run abandoned
>
> It seems that "#loadtables" is a new directive, that is not aware of the
> %srcdir% convention used in the RunTest.bat batch file for locating the
> testdata/ subdirectory.
>
> Here is a minimal patch that yielded a successful build+test for me,
> and should help point the way to a proper fix. (Note that the
> #loadtables tweak only works for a build tree just inside the source
> tree, as I was using):
>
> diff -ru pcre2-10.35/CMakeLists.txt pcre2-10.35-fixed/CMakeLists.txt
> --- pcre2-10.35/CMakeLists.txt  2020-05-09 11:43:10.000000000 -0400
> +++ pcre2-10.35-fixed/CMakeLists.txt    2020-11-20 04:37:54.215894941 -0500
> @@ -827,7 +827,7 @@
>  \@echo off
>  setlocal
>  SET srcdir=\"${winsrc}\"
> -SET pcre2test=\"${winexe}\"
> +SET pcre2test=\"${winbin}\\pcre2test.exe\"
>  if not [%CMAKE_CONFIG_TYPE%]==[] SET
> pcre2test=\"${winbin}\\%CMAKE_CONFIG_TYPE%\\pcre2test.exe\"
>  call %srcdir%\\RunTest.Bat
>  if errorlevel 1 exit /b 1
> diff -ru pcre2-10.35/testdata/testinput2
> pcre2-10.35-fixed/testdata/testinput2
> --- pcre2-10.35/testdata/testinput2    2020-04-24 11:35:58.000000000 -0400
> +++ pcre2-10.35-fixed/testdata/testinput2      2020-11-20
> 04:38:07.031894819 -0500
> @@ -5850,7 +5850,7 @@
>  /^\w+/tables=3
>      École
>
> -#loadtables ./testdata/testbtables
> +#loadtables ../testdata/testbtables
>
>  /^\w+/tables=3
>      École
> diff -ru pcre2-10.35/testdata/testoutput2
> pcre2-10.35-fixed/testdata/testoutput2
> --- pcre2-10.35/testdata/testoutput2    2020-04-24 11:36:22.000000000 -0400
> +++ pcre2-10.35-fixed/testdata/testoutput2      2020-11-20
> 04:47:36.907889384 -0500
> @@ -17597,7 +17597,7 @@
>  ** 'Tables = 3' is invalid: binary tables have not been loaded
>      École
>
> -#loadtables ./testdata/testbtables
> +#loadtables ../testdata/testbtables
>
>  /^\w+/tables=3
>      École
>
>
> Please Cc: me on any replies, as I am not subscribed to this list.
>
>
> --Daniel
>
>
> --
> Daniel Richard G. || skunk@???
> My ASCII-art .sig got a bad case of Times New Roman.
>
> --
> ## List details at https://lists.exim.org/mailman/listinfo/pcre-dev
>

--
## List details at https://lists.exim.org/mailman/listinfo/pcre-dev