[Pcre-svn] [1106] code/trunk: Fix pcre2grep -o bug when ovec…

Página superior
Eliminar este mensaje
Autor: Subversion repository
Fecha:  
A: pcre-svn
Asunto: [Pcre-svn] [1106] code/trunk: Fix pcre2grep -o bug when ovector overflows; add option to adjust the limit;
Revision: 1106
          http://www.exim.org/viewvc/pcre2?view=rev&revision=1106
Author:   ph10
Date:     2019-06-15 16:51:07 +0100 (Sat, 15 Jun 2019)
Log Message:
-----------
Fix pcre2grep -o bug when ovector overflows; add option to adjust the limit; 
raise the default limit; give error if -o requests an uncaptured parens.


Modified Paths:
--------------
    code/trunk/ChangeLog
    code/trunk/RunGrepTest
    code/trunk/doc/html/pcre2api.html
    code/trunk/doc/html/pcre2grep.html
    code/trunk/doc/html/pcre2test.html
    code/trunk/doc/pcre2.txt
    code/trunk/doc/pcre2grep.1
    code/trunk/doc/pcre2grep.txt
    code/trunk/doc/pcre2test.txt
    code/trunk/src/pcre2grep.c
    code/trunk/testdata/grepoutput


Modified: code/trunk/ChangeLog
===================================================================
--- code/trunk/ChangeLog    2019-06-14 15:44:57 UTC (rev 1105)
+++ code/trunk/ChangeLog    2019-06-15 15:51:07 UTC (rev 1106)
@@ -39,7 +39,13 @@
 10. A (*MARK) value inside a successful condition was not being returned by the 
 interpretive matcher (it was returned by JIT). This bug has been mended.


+11. A bug in pcre2grep meant that -o without an argument (or -o0) didn't work
+if the pattern had more than 32 capturing parentheses. This is fixed. In
+addition (a) the default limit for groups requested by -o<n> has been raised to
+50, (b) the new --om-capture option changes the limit, (c) an error is raised
+if -o asks for a group that is above the limit.

+
Version 10.33 16-April-2019
---------------------------


Modified: code/trunk/RunGrepTest
===================================================================
--- code/trunk/RunGrepTest    2019-06-14 15:44:57 UTC (rev 1105)
+++ code/trunk/RunGrepTest    2019-06-15 15:51:07 UTC (rev 1106)
@@ -653,7 +653,14 @@
 $valgrind $vjs $pcre2grep -a -f testtemp1grep testtemp2grep >>testtrygrep
 echo "RC=$?" >>testtrygrep


+echo "---------------------------- Test 127 -----------------------------" >>testtrygrep
+(cd $srcdir; $valgrind $vjs $pcre2grep -o --om-capture=0 'pattern()()()()' testdata/grepinput) >>testtrygrep
+echo "RC=$?" >>testtrygrep

+echo "---------------------------- Test 128 -----------------------------" >>testtrygrep
+(cd $srcdir; $valgrind $vjs $pcre2grep -o1 --om-capture=0 'pattern()()()()' testdata/grepinput) >>testtrygrep 2>&1
+echo "RC=$?" >>testtrygrep
+
# Now compare the results.

$cf $srcdir/testdata/grepoutput testtrygrep

Modified: code/trunk/doc/html/pcre2api.html
===================================================================
--- code/trunk/doc/html/pcre2api.html    2019-06-14 15:44:57 UTC (rev 1105)
+++ code/trunk/doc/html/pcre2api.html    2019-06-15 15:51:07 UTC (rev 1106)
@@ -2266,12 +2266,12 @@
   PCRE2_INFO_MINLENGTH
 </pre>
 If a minimum length for matching subject strings was computed, its value is
-returned. Otherwise the returned value is 0. The value is a number of
-characters, which in UTF mode may be different from the number of code units.
-The third argument should point to an <b>uint32_t</b> variable. The value is a
-lower bound to the length of any matching string. There may not be any strings
-of that length that do actually match, but every string that does match is at
-least that long.
+returned. Otherwise the returned value is 0. This value is not computed when
+PCRE2_NO_START_OPTIMIZE is set. The value is a number of characters, which in
+UTF mode may be different from the number of code units. The third argument
+should point to an <b>uint32_t</b> variable. The value is a lower bound to the
+length of any matching string. There may not be any strings of that length that
+do actually match, but every string that does match is at least that long.
 <pre>
   PCRE2_INFO_NAMECOUNT
   PCRE2_INFO_NAMEENTRYSIZE
@@ -3836,7 +3836,7 @@
 </P>
 <br><a name="SEC42" href="#TOC1">REVISION</a><br>
 <P>
-Last updated: 30 May 2019
+Last updated: 11 June 2019
 <br>
 Copyright &copy; 1997-2019 University of Cambridge.
 <br>


Modified: code/trunk/doc/html/pcre2grep.html
===================================================================
--- code/trunk/doc/html/pcre2grep.html    2019-06-14 15:44:57 UTC (rev 1105)
+++ code/trunk/doc/html/pcre2grep.html    2019-06-15 15:51:07 UTC (rev 1106)
@@ -685,22 +685,34 @@
 <P>
 <b>-o</b><i>number</i>, <b>--only-matching</b>=<i>number</i>
 Show only the part of the line that matched the capturing parentheses of the
-given number. Up to 32 capturing parentheses are supported, and -o0 is
-equivalent to <b>-o</b> without a number. Because these options can be given
-without an argument (see above), if an argument is present, it must be given in
-the same shell item, for example, -o3 or --only-matching=2. The comments given
-for the non-argument case above also apply to this option. If the specified
-capturing parentheses do not exist in the pattern, or were not set in the
-match, nothing is output unless the file name or line number are being output.
+given number. Up to 50 capturing parentheses are supported by default. This
+limit can be changed via the <b>--om-capture</b> option. A pattern may contain
+any number of capturing parentheses, but only those whose number is within the
+limit can be accessed by <b>-o</b>. An error occurs if the number specified by
+<b>-o</b> is greater than the limit.
 <br>
 <br>
+-o0 is the same as <b>-o</b> without a number. Because these options can be
+given without an argument (see above), if an argument is present, it must be
+given in the same shell item, for example, -o3 or --only-matching=2. The
+comments given for the non-argument case above also apply to this option. If
+the specified capturing parentheses do not exist in the pattern, or were not
+set in the match, nothing is output unless the file name or line number are
+being output.
+<br>
+<br>
 If this option is given multiple times, multiple substrings are output for each
 match, in the order the options are given, and all on one line. For example,
 -o3 -o1 -o3 causes the substrings matched by capturing parentheses 3 and 1 and
 then 3 again to be output. By default, there is no separator (but see the next
-option).
+but one option).
 </P>
 <P>
+<b>--om-capture</b>=<i>number</i>
+Set the number of capturing parentheses that can be accessed by <b>-o</b>. The 
+default is 50.
+</P>
+<P>
 <b>--om-separator</b>=<i>text</i>
 Specify a separating string for multiple occurrences of <b>-o</b>. The default
 is an empty string. Separating strings are never coloured.
@@ -980,7 +992,7 @@
 </P>
 <br><a name="SEC16" href="#TOC1">REVISION</a><br>
 <P>
-Last updated: 28 May 2019
+Last updated: 15 June 2019
 <br>
 Copyright &copy; 1997-2019 University of Cambridge.
 <br>


Modified: code/trunk/doc/html/pcre2test.html
===================================================================
--- code/trunk/doc/html/pcre2test.html    2019-06-14 15:44:57 UTC (rev 1105)
+++ code/trunk/doc/html/pcre2test.html    2019-06-15 15:51:07 UTC (rev 1106)
@@ -739,7 +739,9 @@
 if there is more than one they are listed as "starting code units". "Last code
 unit" is the last literal code unit that must be present in any match. This is
 not necessarily the last character. These lines are omitted if no starting or
-ending code units are recorded.
+ending code units are recorded. The subject length line is omitted when 
+<b>no_start_optimize</b> is set because the minimum length is not calculated 
+when it can never be used.
 </P>
 <P>
 The <b>framesize</b> modifier shows the size, in bytes, of the storage frames
@@ -2079,7 +2081,7 @@
 </P>
 <br><a name="SEC21" href="#TOC1">REVISION</a><br>
 <P>
-Last updated: 23 May 2019
+Last updated: 11 June 2019
 <br>
 Copyright &copy; 1997-2019 University of Cambridge.
 <br>


Modified: code/trunk/doc/pcre2.txt
===================================================================
--- code/trunk/doc/pcre2.txt    2019-06-14 15:44:57 UTC (rev 1105)
+++ code/trunk/doc/pcre2.txt    2019-06-15 15:51:07 UTC (rev 1106)
@@ -2239,12 +2239,13 @@
          PCRE2_INFO_MINLENGTH


        If  a  minimum  length  for  matching subject strings was computed, its
-       value is returned. Otherwise the returned value is 0. The  value  is  a
-       number  of characters, which in UTF mode may be different from the num-
-       ber of code units.  The third argument  should  point  to  an  uint32_t
-       variable.  The  value  is  a  lower bound to the length of any matching
-       string. There may not be any strings of that length  that  do  actually
-       match, but every string that does match is at least that long.
+       value is returned. Otherwise the returned value is 0. This value is not
+       computed  when PCRE2_NO_START_OPTIMIZE is set. The value is a number of
+       characters, which in UTF mode may be different from the number of  code
+       units.  The  third  argument  should point to an uint32_t variable. The
+       value is a lower bound to the length of any matching string. There  may
+       not  be  any  strings  of that length that do actually match, but every
+       string that does match is at least that long.


          PCRE2_INFO_NAMECOUNT
          PCRE2_INFO_NAMEENTRYSIZE
@@ -2251,44 +2252,44 @@
          PCRE2_INFO_NAMETABLE


        PCRE2 supports the use of named as well as numbered capturing parenthe-
-       ses. The names are just an additional way of identifying the  parenthe-
+       ses.  The names are just an additional way of identifying the parenthe-
        ses, which still acquire numbers. Several convenience functions such as
-       pcre2_substring_get_byname() are provided for extracting captured  sub-
-       strings  by  name. It is also possible to extract the data directly, by
-       first converting the name to a number in order to  access  the  correct
-       pointers  in the output vector (described with pcre2_match() below). To
-       do the conversion, you need to use the  name-to-number  map,  which  is
+       pcre2_substring_get_byname()  are provided for extracting captured sub-
+       strings by name. It is also possible to extract the data  directly,  by
+       first  converting  the  name to a number in order to access the correct
+       pointers in the output vector (described with pcre2_match() below).  To
+       do  the  conversion,  you  need to use the name-to-number map, which is
        described by these three values.


-       The  map  consists  of a number of fixed-size entries. PCRE2_INFO_NAME-
-       COUNT gives the number of entries, and  PCRE2_INFO_NAMEENTRYSIZE  gives
-       the  size  of each entry in code units; both of these return a uint32_t
+       The map consists of a number of  fixed-size  entries.  PCRE2_INFO_NAME-
+       COUNT  gives  the number of entries, and PCRE2_INFO_NAMEENTRYSIZE gives
+       the size of each entry in code units; both of these return  a  uint32_t
        value. The entry size depends on the length of the longest name.


        PCRE2_INFO_NAMETABLE returns a pointer to the first entry of the table.
-       This  is  a  PCRE2_SPTR  pointer to a block of code units. In the 8-bit
-       library, the first two bytes of each entry are the number of  the  cap-
+       This is a PCRE2_SPTR pointer to a block of code  units.  In  the  8-bit
+       library,  the  first two bytes of each entry are the number of the cap-
        turing parenthesis, most significant byte first. In the 16-bit library,
-       the pointer points to 16-bit code units, the first  of  which  contains
-       the  parenthesis  number.  In the 32-bit library, the pointer points to
-       32-bit code units, the first of which contains the parenthesis  number.
+       the  pointer  points  to 16-bit code units, the first of which contains
+       the parenthesis number. In the 32-bit library, the  pointer  points  to
+       32-bit  code units, the first of which contains the parenthesis number.
        The rest of the entry is the corresponding name, zero terminated.


-       The  names are in alphabetical order. If (?| is used to create multiple
-       capture groups with the same number, as described  in  the  section  on
-       duplicate  group  numbers  in  the pcre2pattern page, the groups may be
-       given the same name, but there is only one entry in the table.  Differ-
+       The names are in alphabetical order. If (?| is used to create  multiple
+       capture  groups  with  the  same number, as described in the section on
+       duplicate group numbers in the pcre2pattern page,  the  groups  may  be
+       given  the same name, but there is only one entry in the table. Differ-
        ent names for groups of the same number are not permitted.


-       Duplicate  names  for capture groups with different numbers are permit-
+       Duplicate names for capture groups with different numbers  are  permit-
        ted, but only if PCRE2_DUPNAMES is set. They appear in the table in the
-       order  in  which  they were found in the pattern. In the absence of (?|
-       this is the order of increasing number; when (?| is used  this  is  not
-       necessarily  the  case because later capture groups may have lower num-
+       order in which they were found in the pattern. In the  absence  of  (?|
+       this  is  the  order of increasing number; when (?| is used this is not
+       necessarily the case because later capture groups may have  lower  num-
        bers.


-       As a simple example of the name/number table,  consider  the  following
-       pattern  after  compilation by the 8-bit library (assume PCRE2_EXTENDED
+       As  a  simple  example of the name/number table, consider the following
+       pattern after compilation by the 8-bit library  (assume  PCRE2_EXTENDED
        is set, so white space - including newlines - is ignored):


          (?<date> (?<year>(\d\d)?\d\d) -
@@ -2295,7 +2296,7 @@
          (?<month>\d\d) - (?<day>\d\d) )


        There are four named capture groups, so the table has four entries, and
-       each  entry  in the table is eight bytes long. The table is as follows,
+       each entry in the table is eight bytes long. The table is  as  follows,
        with non-printing bytes shows in hexadecimal, and undefined bytes shown
        as ??:


@@ -2304,8 +2305,8 @@
          00 04 m  o  n  t  h  00
          00 02 y  e  a  r  00 ??


-       When  writing  code to extract data from named capture groups using the
-       name-to-number map, remember that the length of the entries  is  likely
+       When writing code to extract data from named capture groups  using  the
+       name-to-number  map,  remember that the length of the entries is likely
        to be different for each compiled pattern.


          PCRE2_INFO_NEWLINE
@@ -2324,14 +2325,14 @@


          PCRE2_INFO_SIZE


-       Return the size of  the  compiled  pattern  in  bytes  (for  all  three
-       libraries).  The third argument should point to a size_t variable. This
-       value includes the size of the general data  block  that  precedes  the
-       code  units of the compiled pattern itself. The value that is used when
-       pcre2_compile() is getting memory in which to place the  compiled  pat-
-       tern  may  be  slightly  larger than the value returned by this option,
-       because there are cases where the code that calculates the size has  to
-       over-estimate.  Processing  a  pattern  with  the JIT compiler does not
+       Return  the  size  of  the  compiled  pattern  in  bytes (for all three
+       libraries). The third argument should point to a size_t variable.  This
+       value  includes  the  size  of the general data block that precedes the
+       code units of the compiled pattern itself. The value that is used  when
+       pcre2_compile()  is  getting memory in which to place the compiled pat-
+       tern may be slightly larger than the value  returned  by  this  option,
+       because  there are cases where the code that calculates the size has to
+       over-estimate. Processing a pattern with  the  JIT  compiler  does  not
        alter the value returned by this option.



@@ -2342,30 +2343,30 @@
          void *user_data);


        A script language that supports the use of string arguments in callouts
-       might  like  to  scan  all the callouts in a pattern before running the
+       might like to scan all the callouts in a  pattern  before  running  the
        match. This can be done by calling pcre2_callout_enumerate(). The first
-       argument  is  a  pointer  to a compiled pattern, the second points to a
-       callback function, and the third is arbitrary user data.  The  callback
-       function  is  called  for  every callout in the pattern in the order in
+       argument is a pointer to a compiled pattern, the  second  points  to  a
+       callback  function,  and the third is arbitrary user data. The callback
+       function is called for every callout in the pattern  in  the  order  in
        which they appear. Its first argument is a pointer to a callout enumer-
-       ation  block,  and  its second argument is the user_data value that was
-       passed to pcre2_callout_enumerate(). The contents of the  callout  enu-
-       meration  block  are described in the pcre2callout documentation, which
+       ation block, and its second argument is the user_data  value  that  was
+       passed  to  pcre2_callout_enumerate(). The contents of the callout enu-
+       meration block are described in the pcre2callout  documentation,  which
        also gives further details about callouts.



SERIALIZATION AND PRECOMPILING

-       It is possible to save compiled patterns  on  disc  or  elsewhere,  and
-       reload  them  later,  subject  to a number of restrictions. The host on
-       which the patterns are reloaded must be running  the  same  version  of
+       It  is  possible  to  save  compiled patterns on disc or elsewhere, and
+       reload them later, subject to a number of  restrictions.  The  host  on
+       which  the  patterns  are  reloaded must be running the same version of
        PCRE2, with the same code unit width, and must also have the same endi-
-       anness, pointer width, and PCRE2_SIZE type.  Before  compiled  patterns
-       can  be  saved, they must be converted to a "serialized" form, which in
-       the case of PCRE2 is really just a bytecode dump.  The functions  whose
-       names  begin  with pcre2_serialize_ are used for converting to and from
-       the serialized form. They are described in the pcre2serialize  documen-
-       tation.  Note  that  PCRE2 serialization does not convert compiled pat-
+       anness,  pointer  width,  and PCRE2_SIZE type. Before compiled patterns
+       can be saved, they must be converted to a "serialized" form,  which  in
+       the  case of PCRE2 is really just a bytecode dump.  The functions whose
+       names begin with pcre2_serialize_ are used for converting to  and  from
+       the  serialized form. They are described in the pcre2serialize documen-
+       tation. Note that PCRE2 serialization does not  convert  compiled  pat-
        terns to an abstract format like Java or .NET serialization.



@@ -2379,60 +2380,60 @@

        void pcre2_match_data_free(pcre2_match_data *match_data);


-       Information about a successful or unsuccessful match  is  placed  in  a
-       match  data  block,  which  is  an opaque structure that is accessed by
-       function calls. In particular, the match data block contains  a  vector
-       of  offsets into the subject string that define the matched part of the
-       subject and any substrings that were captured. This  is  known  as  the
+       Information  about  a  successful  or unsuccessful match is placed in a
+       match data block, which is an opaque  structure  that  is  accessed  by
+       function  calls.  In particular, the match data block contains a vector
+       of offsets into the subject string that define the matched part of  the
+       subject  and  any  substrings  that were captured. This is known as the
        ovector.


-       Before  calling  pcre2_match(), pcre2_dfa_match(), or pcre2_jit_match()
+       Before calling pcre2_match(), pcre2_dfa_match(),  or  pcre2_jit_match()
        you must create a match data block by calling one of the creation func-
-       tions  above.  For pcre2_match_data_create(), the first argument is the
-       number of pairs of offsets in the  ovector.  One  pair  of  offsets  is
+       tions above. For pcre2_match_data_create(), the first argument  is  the
+       number  of  pairs  of  offsets  in  the ovector. One pair of offsets is
        required to identify the string that matched the whole pattern, with an
-       additional pair for each captured substring. For example, a value of  4
-       creates  enough space to record the matched portion of the subject plus
-       three captured substrings. A minimum of at least 1 pair is  imposed  by
+       additional  pair for each captured substring. For example, a value of 4
+       creates enough space to record the matched portion of the subject  plus
+       three  captured  substrings. A minimum of at least 1 pair is imposed by
        pcre2_match_data_create(), so it is always possible to return the over-
        all matched string.


        The second argument of pcre2_match_data_create() is a pointer to a gen-
-       eral  context, which can specify custom memory management for obtaining
+       eral context, which can specify custom memory management for  obtaining
        the memory for the match data block. If you are not using custom memory
        management, pass NULL, which causes malloc() to be used.


-       For  pcre2_match_data_create_from_pattern(),  the  first  argument is a
+       For pcre2_match_data_create_from_pattern(), the  first  argument  is  a
        pointer to a compiled pattern. The ovector is created to be exactly the
        right size to hold all the substrings a pattern might capture. The sec-
-       ond argument is again a pointer to a general context, but in this  case
+       ond  argument is again a pointer to a general context, but in this case
        if NULL is passed, the memory is obtained using the same allocator that
        was used for the compiled pattern (custom or default).


-       A match data block can be used many times, with the same  or  different
-       compiled  patterns. You can extract information from a match data block
+       A  match  data block can be used many times, with the same or different
+       compiled patterns. You can extract information from a match data  block
        after  a  match  operation  has  finished,  using  functions  that  are
-       described  in  the  sections  on  matched  strings and other match data
+       described in the sections on  matched  strings  and  other  match  data
        below.


-       When a call of pcre2_match() fails, valid  data  is  available  in  the
-       match    block    only   when   the   error   is   PCRE2_ERROR_NOMATCH,
-       PCRE2_ERROR_PARTIAL, or one of the  error  codes  for  an  invalid  UTF
+       When  a  call  of  pcre2_match()  fails, valid data is available in the
+       match   block   only   when   the   error    is    PCRE2_ERROR_NOMATCH,
+       PCRE2_ERROR_PARTIAL,  or  one  of  the  error  codes for an invalid UTF
        string. Exactly what is available depends on the error, and is detailed
        below.


-       When one of the matching functions is called, pointers to the  compiled
-       pattern  and the subject string are set in the match data block so that
-       they can be referenced by the extraction functions after  a  successful
+       When  one of the matching functions is called, pointers to the compiled
+       pattern and the subject string are set in the match data block so  that
+       they  can  be referenced by the extraction functions after a successful
        match. After running a match, you must not free a compiled pattern or a
-       subject string until after all operations on the match data block  (for
-       that  match)  have  taken  place,  unless,  in  the case of the subject
-       string, you have used the PCRE2_COPY_MATCHED_SUBJECT option,  which  is
-       described  in  the  section  entitled  "Option  bits for pcre2_match()"
+       subject  string until after all operations on the match data block (for
+       that match) have taken place,  unless,  in  the  case  of  the  subject
+       string,  you  have used the PCRE2_COPY_MATCHED_SUBJECT option, which is
+       described in the  section  entitled  "Option  bits  for  pcre2_match()"
        below.


-       When a match data block itself is no longer needed, it should be  freed
-       by  calling  pcre2_match_data_free(). If this function is called with a
+       When  a match data block itself is no longer needed, it should be freed
+       by calling pcre2_match_data_free(). If this function is called  with  a
        NULL argument, it returns immediately, without doing anything.



@@ -2443,15 +2444,15 @@
          uint32_t options, pcre2_match_data *match_data,
          pcre2_match_context *mcontext);


-       The function pcre2_match() is called to match a subject string  against
-       a  compiled pattern, which is passed in the code argument. You can call
+       The  function pcre2_match() is called to match a subject string against
+       a compiled pattern, which is passed in the code argument. You can  call
        pcre2_match() with the same code argument as many times as you like, in
-       order  to  find multiple matches in the subject string or to match dif-
+       order to find multiple matches in the subject string or to  match  dif-
        ferent subject strings with the same pattern.


-       This function is the main matching facility  of  the  library,  and  it
-       operates  in  a  Perl-like  manner. For specialist use there is also an
-       alternative matching function, which is described below in the  section
+       This  function  is  the  main  matching facility of the library, and it
+       operates in a Perl-like manner. For specialist use  there  is  also  an
+       alternative  matching function, which is described below in the section
        about the pcre2_dfa_match() function.


        Here is an example of a simple call to pcre2_match():
@@ -2466,7 +2467,7 @@
            md,             /* the match data block */
            NULL);          /* a match context; NULL means use defaults */


-       If  the  subject  string is zero-terminated, the length can be given as
+       If the subject string is zero-terminated, the length can  be  given  as
        PCRE2_ZERO_TERMINATED. A match context must be provided if certain less
        common matching parameters are to be changed. For details, see the sec-
        tion on the match context above.
@@ -2473,110 +2474,110 @@


    The string to be matched by pcre2_match()


-       The subject string is passed to pcre2_match() as a pointer in  subject,
-       a  length  in  length, and a starting offset in startoffset. The length
-       and offset are in code units, not characters.  That  is,  they  are  in
-       bytes  for the 8-bit library, 16-bit code units for the 16-bit library,
-       and 32-bit code units for the 32-bit library, whether or not  UTF  pro-
+       The  subject string is passed to pcre2_match() as a pointer in subject,
+       a length in length, and a starting offset in  startoffset.  The  length
+       and  offset  are  in  code units, not characters.  That is, they are in
+       bytes for the 8-bit library, 16-bit code units for the 16-bit  library,
+       and  32-bit  code units for the 32-bit library, whether or not UTF pro-
        cessing is enabled.


        If startoffset is greater than the length of the subject, pcre2_match()
-       returns PCRE2_ERROR_BADOFFSET. When the starting offset  is  zero,  the
-       search  for a match starts at the beginning of the subject, and this is
+       returns  PCRE2_ERROR_BADOFFSET.  When  the starting offset is zero, the
+       search for a match starts at the beginning of the subject, and this  is
        by far the most common case. In UTF-8 or UTF-16 mode, the starting off-
-       set  must  point to the start of a character, or to the end of the sub-
-       ject (in UTF-32 mode, one code unit equals one character, so  all  off-
-       sets  are  valid).  Like  the  pattern  string, the subject may contain
+       set must point to the start of a character, or to the end of  the  sub-
+       ject  (in  UTF-32 mode, one code unit equals one character, so all off-
+       sets are valid). Like the  pattern  string,  the  subject  may  contain
        binary zeros.


-       A non-zero starting offset is useful when searching for  another  match
-       in  the  same  subject  by calling pcre2_match() again after a previous
-       success.  Setting startoffset differs from  passing  over  a  shortened
-       string  and  setting  PCRE2_NOTBOL in the case of a pattern that begins
+       A  non-zero  starting offset is useful when searching for another match
+       in the same subject by calling pcre2_match()  again  after  a  previous
+       success.   Setting  startoffset  differs  from passing over a shortened
+       string and setting PCRE2_NOTBOL in the case of a  pattern  that  begins
        with any kind of lookbehind. For example, consider the pattern


          \Biss\B


-       which finds occurrences of "iss" in the middle of  words.  (\B  matches
-       only  if  the  current position in the subject is not a word boundary.)
+       which  finds  occurrences  of "iss" in the middle of words. (\B matches
+       only if the current position in the subject is not  a  word  boundary.)
        When applied to the string "Mississipi" the first call to pcre2_match()
-       finds  the first occurrence. If pcre2_match() is called again with just
-       the remainder of the subject,  namely  "issipi",  it  does  not  match,
+       finds the first occurrence. If pcre2_match() is called again with  just
+       the  remainder  of  the  subject,  namely  "issipi", it does not match,
        because \B is always false at the start of the subject, which is deemed
-       to be a word boundary. However, if pcre2_match() is passed  the  entire
+       to  be  a word boundary. However, if pcre2_match() is passed the entire
        string again, but with startoffset set to 4, it finds the second occur-
-       rence of "iss" because it is able to look behind the starting point  to
+       rence  of "iss" because it is able to look behind the starting point to
        discover that it is preceded by a letter.


-       Finding  all  the  matches  in a subject is tricky when the pattern can
+       Finding all the matches in a subject is tricky  when  the  pattern  can
        match an empty string. It is possible to emulate Perl's /g behaviour by
-       first   trying   the   match   again  at  the  same  offset,  with  the
-       PCRE2_NOTEMPTY_ATSTART and PCRE2_ANCHORED options,  and  then  if  that
-       fails,  advancing  the  starting  offset  and  trying an ordinary match
-       again. There is some code that demonstrates  how  to  do  this  in  the
-       pcre2demo  sample  program. In the most general case, you have to check
-       to see if the newline convention recognizes CRLF as a newline,  and  if
-       so,  and the current character is CR followed by LF, advance the start-
+       first  trying  the  match  again  at  the   same   offset,   with   the
+       PCRE2_NOTEMPTY_ATSTART  and  PCRE2_ANCHORED  options,  and then if that
+       fails, advancing the starting  offset  and  trying  an  ordinary  match
+       again.  There  is  some  code  that  demonstrates how to do this in the
+       pcre2demo sample program. In the most general case, you have  to  check
+       to  see  if the newline convention recognizes CRLF as a newline, and if
+       so, and the current character is CR followed by LF, advance the  start-
        ing offset by two characters instead of one.


        If a non-zero starting offset is passed when the pattern is anchored, a
        single attempt to match at the given offset is made. This can only suc-
-       ceed if the pattern does not require the match to be at  the  start  of
-       the  subject.  In other words, the anchoring must be the result of set-
-       ting the PCRE2_ANCHORED option or the use of .* with PCRE2_DOTALL,  not
+       ceed  if  the  pattern does not require the match to be at the start of
+       the subject. In other words, the anchoring must be the result  of  set-
+       ting  the PCRE2_ANCHORED option or the use of .* with PCRE2_DOTALL, not
        by starting the pattern with ^ or \A.


    Option bits for pcre2_match()


        The unused bits of the options argument for pcre2_match() must be zero.
-       The   only   bits    that    may    be    set    are    PCRE2_ANCHORED,
-       PCRE2_COPY_MATCHED_SUBJECT,       PCRE2_ENDANCHORED,      PCRE2_NOTBOL,
-       PCRE2_NOTEOL,  PCRE2_NOTEMPTY,  PCRE2_NOTEMPTY_ATSTART,   PCRE2_NO_JIT,
-       PCRE2_NO_UTF_CHECK,  PCRE2_PARTIAL_HARD,  and PCRE2_PARTIAL_SOFT. Their
+       The    only    bits    that    may    be    set   are   PCRE2_ANCHORED,
+       PCRE2_COPY_MATCHED_SUBJECT,      PCRE2_ENDANCHORED,       PCRE2_NOTBOL,
+       PCRE2_NOTEOL,   PCRE2_NOTEMPTY,  PCRE2_NOTEMPTY_ATSTART,  PCRE2_NO_JIT,
+       PCRE2_NO_UTF_CHECK, PCRE2_PARTIAL_HARD, and  PCRE2_PARTIAL_SOFT.  Their
        action is described below.


-       Setting PCRE2_ANCHORED or PCRE2_ENDANCHORED at match time is  not  sup-
-       ported  by  the just-in-time (JIT) compiler. If it is set, JIT matching
-       is disabled and the interpretive code in pcre2_match()  is  run.  Apart
-       from  PCRE2_NO_JIT (obviously), the remaining options are supported for
+       Setting  PCRE2_ANCHORED  or PCRE2_ENDANCHORED at match time is not sup-
+       ported by the just-in-time (JIT) compiler. If it is set,  JIT  matching
+       is  disabled  and  the interpretive code in pcre2_match() is run. Apart
+       from PCRE2_NO_JIT (obviously), the remaining options are supported  for
        JIT matching.


          PCRE2_ANCHORED


        The PCRE2_ANCHORED option limits pcre2_match() to matching at the first
-       matching  position.  If  a pattern was compiled with PCRE2_ANCHORED, or
-       turned out to be anchored by virtue of its contents, it cannot be  made
-       unachored  at matching time. Note that setting the option at match time
+       matching position. If a pattern was compiled  with  PCRE2_ANCHORED,  or
+       turned  out to be anchored by virtue of its contents, it cannot be made
+       unachored at matching time. Note that setting the option at match  time
        disables JIT matching.


          PCRE2_COPY_MATCHED_SUBJECT


-       By default, a pointer to the subject is remembered in  the  match  data
-       block  so  that,  after a successful match, it can be referenced by the
-       substring extraction functions. This means that  the  subject's  memory
-       must  not  be  freed  until  all such operations are complete. For some
-       applications where the lifetime of the subject string  is  not  guaran-
-       teed,  it may be necessary to make a copy of the subject string, but it
+       By  default,  a  pointer to the subject is remembered in the match data
+       block so that, after a successful match, it can be  referenced  by  the
+       substring  extraction  functions.  This means that the subject's memory
+       must not be freed until all such  operations  are  complete.  For  some
+       applications  where  the  lifetime of the subject string is not guaran-
+       teed, it may be necessary to make a copy of the subject string, but  it
        is wasteful to do this unless the match is successful. After a success-
-       ful  match, if PCRE2_COPY_MATCHED_SUBJECT is set, the subject is copied
-       and the new pointer is remembered in the match data  block  instead  of
-       the  original  subject  pointer. The memory allocator that was used for
-       the match block itself is used. The copy is  automatically  freed  when
-       pcre2_match_data_free()  is  called to free the match data block. It is
+       ful match, if PCRE2_COPY_MATCHED_SUBJECT is set, the subject is  copied
+       and  the  new  pointer is remembered in the match data block instead of
+       the original subject pointer. The memory allocator that  was  used  for
+       the  match  block  itself is used. The copy is automatically freed when
+       pcre2_match_data_free() is called to free the match data block.  It  is
        also automatically freed if the match data block is re-used for another
        match operation.


          PCRE2_ENDANCHORED


-       If  the  PCRE2_ENDANCHORED option is set, any string that pcre2_match()
-       matches must be right at the end of the subject string. Note that  set-
+       If the PCRE2_ENDANCHORED option is set, any string  that  pcre2_match()
+       matches  must be right at the end of the subject string. Note that set-
        ting the option at match time disables JIT matching.


          PCRE2_NOTBOL


        This option specifies that first character of the subject string is not
-       the beginning of a line, so the  circumflex  metacharacter  should  not
-       match  before  it.  Setting  this without having set PCRE2_MULTILINE at
+       the  beginning  of  a  line, so the circumflex metacharacter should not
+       match before it. Setting this without  having  set  PCRE2_MULTILINE  at
        compile time causes circumflex never to match. This option affects only
        the behaviour of the circumflex metacharacter. It does not affect \A.


@@ -2583,9 +2584,9 @@
          PCRE2_NOTEOL


        This option specifies that the end of the subject string is not the end
-       of a line, so the dollar metacharacter should not match it nor  (except
-       in  multiline mode) a newline immediately before it. Setting this with-
-       out having set PCRE2_MULTILINE at compile time causes dollar  never  to
+       of  a line, so the dollar metacharacter should not match it nor (except
+       in multiline mode) a newline immediately before it. Setting this  with-
+       out  having  set PCRE2_MULTILINE at compile time causes dollar never to
        match. This option affects only the behaviour of the dollar metacharac-
        ter. It does not affect \Z or \z.


@@ -2592,85 +2593,85 @@
          PCRE2_NOTEMPTY


        An empty string is not considered to be a valid match if this option is
-       set.  If  there are alternatives in the pattern, they are tried. If all
-       the alternatives match the empty string, the entire  match  fails.  For
+       set. If there are alternatives in the pattern, they are tried.  If  all
+       the  alternatives  match  the empty string, the entire match fails. For
        example, if the pattern


          a?b?


-       is  applied  to  a  string not beginning with "a" or "b", it matches an
+       is applied to a string not beginning with "a" or  "b",  it  matches  an
        empty string at the start of the subject. With PCRE2_NOTEMPTY set, this
-       match  is  not valid, so pcre2_match() searches further into the string
+       match is not valid, so pcre2_match() searches further into  the  string
        for occurrences of "a" or "b".


          PCRE2_NOTEMPTY_ATSTART


-       This is like PCRE2_NOTEMPTY, except that it locks out an  empty  string
+       This  is  like PCRE2_NOTEMPTY, except that it locks out an empty string
        match only at the first matching position, that is, at the start of the
-       subject plus the starting offset. An empty string match  later  in  the
-       subject  is  permitted.   If  the pattern is anchored, such a match can
+       subject  plus  the  starting offset. An empty string match later in the
+       subject is permitted.  If the pattern is anchored,  such  a  match  can
        occur only if the pattern contains \K.


          PCRE2_NO_JIT


-       By  default,  if  a  pattern  has  been   successfully   processed   by
-       pcre2_jit_compile(),  JIT  is  automatically used when pcre2_match() is
-       called with options that JIT supports.  Setting  PCRE2_NO_JIT  disables
+       By   default,   if   a  pattern  has  been  successfully  processed  by
+       pcre2_jit_compile(), JIT is automatically used  when  pcre2_match()  is
+       called  with  options  that JIT supports. Setting PCRE2_NO_JIT disables
        the use of JIT; it forces matching to be done by the interpreter.


          PCRE2_NO_UTF_CHECK


        When PCRE2_UTF is set at compile time, the validity of the subject as a
-       UTF  string  is  checked  unless  PCRE2_NO_UTF_CHECK   is   passed   to
+       UTF   string   is   checked  unless  PCRE2_NO_UTF_CHECK  is  passed  to
        pcre2_match() or PCRE2_MATCH_INVALID_UTF was passed to pcre2_compile().
        The latter special case is discussed in detail in the pcre2unicode doc-
        umentation.


-       In  the default case, if a non-zero starting offset is given, the check
-       is applied only to that part of the subject  that  could  be  inspected
-       during  matching,  and there is a check that the starting offset points
-       to the first code unit of a character or to the end of the subject.  If
-       there  are no lookbehind assertions in the pattern, the check starts at
+       In the default case, if a non-zero starting offset is given, the  check
+       is  applied  only  to  that part of the subject that could be inspected
+       during matching, and there is a check that the starting  offset  points
+       to  the first code unit of a character or to the end of the subject. If
+       there are no lookbehind assertions in the pattern, the check starts  at
        the starting offset.  Otherwise, it starts at the length of the longest
-       lookbehind  before  the starting offset, or at the start of the subject
-       if there are not that many characters before the starting offset.  Note
+       lookbehind before the starting offset, or at the start of  the  subject
+       if  there are not that many characters before the starting offset. Note
        that the sequences \b and \B are one-character lookbehinds.


        The check is carried out before any other processing takes place, and a
-       negative error code is returned if the check fails. There  are  several
-       UTF  error  codes  for each code unit width, corresponding to different
-       problems with the code unit sequence. There are discussions  about  the
-       validity  of  UTF-8  strings, UTF-16 strings, and UTF-32 strings in the
+       negative  error  code is returned if the check fails. There are several
+       UTF error codes for each code unit width,  corresponding  to  different
+       problems  with  the code unit sequence. There are discussions about the
+       validity of UTF-8 strings, UTF-16 strings, and UTF-32  strings  in  the
        pcre2unicode documentation.


        If you know that your subject is valid, and you want to skip this check
        for performance reasons, you can set the PCRE2_NO_UTF_CHECK option when
-       calling pcre2_match(). You might want to do this  for  the  second  and
-       subsequent  calls  to pcre2_match() if you are making repeated calls to
+       calling  pcre2_match().  You  might  want to do this for the second and
+       subsequent calls to pcre2_match() if you are making repeated  calls  to
        find multiple matches in the same subject string.


-       Warning: Unless PCRE2_MATCH_INVALID_UTF was set at compile  time,  when
-       PCRE2_NO_UTF_CHECK  is  set  at  match  time  the  effect of passing an
-       invalid string as a subject, or an invalid  value  of  startoffset,  is
-       undefined.   Your  program may crash or loop indefinitely or give wrong
+       Warning:  Unless  PCRE2_MATCH_INVALID_UTF was set at compile time, when
+       PCRE2_NO_UTF_CHECK is set at  match  time  the  effect  of  passing  an
+       invalid  string  as  a  subject, or an invalid value of startoffset, is
+       undefined.  Your program may crash or loop indefinitely or  give  wrong
        results.


          PCRE2_PARTIAL_HARD
          PCRE2_PARTIAL_SOFT


-       These options turn on the partial matching  feature.  A  partial  match
-       occurs  if  the  end of the subject string is reached successfully, but
-       there are not enough subject characters to complete the match. If  this
-       happens  when  PCRE2_PARTIAL_SOFT  (but not PCRE2_PARTIAL_HARD) is set,
-       matching continues by testing any remaining alternatives.  Only  if  no
-       complete  match can be found is PCRE2_ERROR_PARTIAL returned instead of
-       PCRE2_ERROR_NOMATCH. In other words, PCRE2_PARTIAL_SOFT specifies  that
-       the  caller  is prepared to handle a partial match, but only if no com-
+       These  options  turn  on  the partial matching feature. A partial match
+       occurs if the end of the subject string is  reached  successfully,  but
+       there  are not enough subject characters to complete the match. If this
+       happens when PCRE2_PARTIAL_SOFT (but not  PCRE2_PARTIAL_HARD)  is  set,
+       matching  continues  by  testing any remaining alternatives. Only if no
+       complete match can be found is PCRE2_ERROR_PARTIAL returned instead  of
+       PCRE2_ERROR_NOMATCH.  In other words, PCRE2_PARTIAL_SOFT specifies that
+       the caller is prepared to handle a partial match, but only if  no  com-
        plete match can be found.


-       If PCRE2_PARTIAL_HARD is set, it overrides PCRE2_PARTIAL_SOFT. In  this
-       case,  if  a  partial match is found, pcre2_match() immediately returns
-       PCRE2_ERROR_PARTIAL, without considering  any  other  alternatives.  In
+       If  PCRE2_PARTIAL_HARD is set, it overrides PCRE2_PARTIAL_SOFT. In this
+       case, if a partial match is found,  pcre2_match()  immediately  returns
+       PCRE2_ERROR_PARTIAL,  without  considering  any  other alternatives. In
        other words, when PCRE2_PARTIAL_HARD is set, a partial match is consid-
        ered to be more important that an alternative complete match.


@@ -2680,38 +2681,38 @@

NEWLINE HANDLING WHEN MATCHING

-       When  PCRE2 is built, a default newline convention is set; this is usu-
-       ally the standard convention for the operating system. The default  can
-       be  overridden  in a compile context by calling pcre2_set_newline(). It
-       can also be overridden by starting a pattern string with, for  example,
-       (*CRLF),  as  described  in  the  section on newline conventions in the
-       pcre2pattern page. During matching, the newline choice affects the  be-
-       haviour  of the dot, circumflex, and dollar metacharacters. It may also
-       alter the way the match starting position is  advanced  after  a  match
+       When PCRE2 is built, a default newline convention is set; this is  usu-
+       ally  the standard convention for the operating system. The default can
+       be overridden in a compile context by calling  pcre2_set_newline().  It
+       can  also be overridden by starting a pattern string with, for example,
+       (*CRLF), as described in the section  on  newline  conventions  in  the
+       pcre2pattern  page. During matching, the newline choice affects the be-
+       haviour of the dot, circumflex, and dollar metacharacters. It may  also
+       alter  the  way  the  match starting position is advanced after a match
        failure for an unanchored pattern.


        When PCRE2_NEWLINE_CRLF, PCRE2_NEWLINE_ANYCRLF, or PCRE2_NEWLINE_ANY is
-       set as the newline convention, and a match attempt  for  an  unanchored
+       set  as  the  newline convention, and a match attempt for an unanchored
        pattern fails when the current starting position is at a CRLF sequence,
-       and the pattern contains no explicit matches for CR or  LF  characters,
-       the  match  position  is  advanced by two characters instead of one, in
+       and  the  pattern contains no explicit matches for CR or LF characters,
+       the match position is advanced by two characters  instead  of  one,  in
        other words, to after the CRLF.


        The above rule is a compromise that makes the most common cases work as
-       expected.  For  example,  if  the  pattern is .+A (and the PCRE2_DOTALL
+       expected. For example, if the pattern  is  .+A  (and  the  PCRE2_DOTALL
        option is not set), it does not match the string "\r\nA" because, after
-       failing  at the start, it skips both the CR and the LF before retrying.
-       However, the pattern [\r\n]A does match that string,  because  it  con-
+       failing at the start, it skips both the CR and the LF before  retrying.
+       However,  the  pattern  [\r\n]A does match that string, because it con-
        tains an explicit CR or LF reference, and so advances only by one char-
        acter after the first failure.


        An explicit match for CR of LF is either a literal appearance of one of
-       those  characters  in the pattern, or one of the \r or \n or equivalent
+       those characters in the pattern, or one of the \r or \n  or  equivalent
        octal or hexadecimal escape sequences. Implicit matches such as [^X] do
-       not  count, nor does \s, even though it includes CR and LF in the char-
+       not count, nor does \s, even though it includes CR and LF in the  char-
        acters that it matches.


-       Notwithstanding the above, anomalous effects may still occur when  CRLF
+       Notwithstanding  the above, anomalous effects may still occur when CRLF
        is a valid newline sequence and explicit \r or \n escapes appear in the
        pattern.


@@ -2722,82 +2723,82 @@

        PCRE2_SIZE *pcre2_get_ovector_pointer(pcre2_match_data *match_data);


-       In general, a pattern matches a certain portion of the subject, and  in
-       addition,  further  substrings  from  the  subject may be picked out by
-       parenthesized parts of the pattern.  Following  the  usage  in  Jeffrey
-       Friedl's  book,  this  is  called  "capturing" in what follows, and the
-       phrase "capture group" (Perl terminology) is used for a fragment  of  a
-       pattern  that picks out a substring. PCRE2 supports several other kinds
+       In  general, a pattern matches a certain portion of the subject, and in
+       addition, further substrings from the subject  may  be  picked  out  by
+       parenthesized  parts  of  the  pattern.  Following the usage in Jeffrey
+       Friedl's book, this is called "capturing"  in  what  follows,  and  the
+       phrase  "capture  group" (Perl terminology) is used for a fragment of a
+       pattern that picks out a substring. PCRE2 supports several other  kinds
        of parenthesized group that do not cause substrings to be captured. The
-       pcre2_pattern_info()  function can be used to find out how many capture
+       pcre2_pattern_info() function can be used to find out how many  capture
        groups there are in a compiled pattern.


-       You can use auxiliary functions for accessing  captured  substrings  by
+       You  can  use  auxiliary functions for accessing captured substrings by
        number or by name, as described in sections below.


        Alternatively, you can make direct use of the vector of PCRE2_SIZE val-
-       ues, called  the  ovector,  which  contains  the  offsets  of  captured
-       strings.   It   is   part  of  the  match  data  block.   The  function
-       pcre2_get_ovector_pointer() returns the address  of  the  ovector,  and
+       ues,  called  the  ovector,  which  contains  the  offsets  of captured
+       strings.  It  is  part  of  the  match  data   block.    The   function
+       pcre2_get_ovector_pointer()  returns  the  address  of the ovector, and
        pcre2_get_ovector_count() returns the number of pairs of values it con-
        tains.


        Within the ovector, the first in each pair of values is set to the off-
        set of the first code unit of a substring, and the second is set to the
-       offset of the first code unit after the end of a substring. These  val-
-       ues  are always code unit offsets, not character offsets. That is, they
-       are byte offsets in the 8-bit library, 16-bit  offsets  in  the  16-bit
+       offset  of the first code unit after the end of a substring. These val-
+       ues are always code unit offsets, not character offsets. That is,  they
+       are  byte  offsets  in  the 8-bit library, 16-bit offsets in the 16-bit
        library, and 32-bit offsets in the 32-bit library.


-       After  a  partial  match  (error  return PCRE2_ERROR_PARTIAL), only the
-       first pair of offsets (that is, ovector[0]  and  ovector[1])  are  set.
-       They  identify  the part of the subject that was partially matched. See
+       After a partial match  (error  return  PCRE2_ERROR_PARTIAL),  only  the
+       first  pair  of  offsets  (that is, ovector[0] and ovector[1]) are set.
+       They identify the part of the subject that was partially  matched.  See
        the pcre2partial documentation for details of partial matching.


-       After a fully successful match, the first pair  of  offsets  identifies
-       the  portion  of the subject string that was matched by the entire pat-
-       tern. The next pair is used for the first captured  substring,  and  so
-       on.  The  value  returned by pcre2_match() is one more than the highest
-       numbered pair that has been set. For example, if  two  substrings  have
-       been  captured,  the returned value is 3. If there are no captured sub-
+       After  a  fully  successful match, the first pair of offsets identifies
+       the portion of the subject string that was matched by the  entire  pat-
+       tern.  The  next  pair is used for the first captured substring, and so
+       on. The value returned by pcre2_match() is one more  than  the  highest
+       numbered  pair  that  has been set. For example, if two substrings have
+       been captured, the returned value is 3. If there are no  captured  sub-
        strings, the return value from a successful match is 1, indicating that
        just the first pair of offsets has been set.


-       If  a  pattern uses the \K escape sequence within a positive assertion,
+       If a pattern uses the \K escape sequence within a  positive  assertion,
        the reported start of a successful match can be greater than the end of
-       the  match.   For  example,  if the pattern (?=ab\K) is matched against
+       the match.  For example, if the pattern  (?=ab\K)  is  matched  against
        "ab", the start and end offset values for the match are 2 and 0.


-       If a capture group is matched repeatedly within a single  match  opera-
-       tion,  it  is  the  last portion of the subject that it matched that is
+       If  a  capture group is matched repeatedly within a single match opera-
+       tion, it is the last portion of the subject that  it  matched  that  is
        returned.


        If the ovector is too small to hold all the captured substring offsets,
-       as  much  as possible is filled in, and the function returns a value of
-       zero. If captured substrings are not of interest, pcre2_match() may  be
+       as much as possible is filled in, and the function returns a  value  of
+       zero.  If captured substrings are not of interest, pcre2_match() may be
        called with a match data block whose ovector is of minimum length (that
        is, one pair).


-       It is possible for capture group number n+1 to match some part  of  the
-       subject  when  group  n  has  not been used at all. For example, if the
+       It  is  possible for capture group number n+1 to match some part of the
+       subject when group n has not been used at  all.  For  example,  if  the
        string "abc" is matched against the pattern (a|(z))(bc) the return from
-       the  function  is 4, and groups 1 and 3 are matched, but 2 is not. When
-       this happens, both values in the offset pairs corresponding  to  unused
+       the function is 4, and groups 1 and 3 are matched, but 2 is  not.  When
+       this  happens,  both values in the offset pairs corresponding to unused
        groups are set to PCRE2_UNSET.


-       Offset  values  that  correspond  to  unused  groups  at the end of the
-       expression are also set to PCRE2_UNSET.  For  example,  if  the  string
-       "abc"  is matched against the pattern (abc)(x(yz)?)? groups 2 and 3 are
-       not matched. The return from the function is  2,  because  the  highest
-       used  capture  group  number  is  1. The offsets for for the second and
-       third capture groupss (assuming the vector is large enough, of  course)
+       Offset values that correspond to  unused  groups  at  the  end  of  the
+       expression  are  also  set  to  PCRE2_UNSET. For example, if the string
+       "abc" is matched against the pattern (abc)(x(yz)?)? groups 2 and 3  are
+       not  matched.  The  return  from the function is 2, because the highest
+       used capture group number is 1. The offsets  for  for  the  second  and
+       third  capture groupss (assuming the vector is large enough, of course)
        are set to PCRE2_UNSET.


        Elements in the ovector that do not correspond to capturing parentheses
        in the pattern are never changed. That is, if a pattern contains n cap-
        turing parentheses, no more than ovector[0] to ovector[2n+1] are set by
-       pcre2_match(). The other elements retain whatever  values  they  previ-
-       ously  had.  After  a failed match attempt, the contents of the ovector
+       pcre2_match().  The  other  elements retain whatever values they previ-
+       ously had. After a failed match attempt, the contents  of  the  ovector
        are unchanged.



@@ -2807,55 +2808,55 @@

        PCRE2_SIZE pcre2_get_startchar(pcre2_match_data *match_data);


-       As well as the offsets in the ovector, other information about a  match
-       is  retained  in the match data block and can be retrieved by the above
-       functions in appropriate circumstances. If they  are  called  at  other
+       As  well as the offsets in the ovector, other information about a match
+       is retained in the match data block and can be retrieved by  the  above
+       functions  in  appropriate  circumstances.  If they are called at other
        times, the result is undefined.


-       After  a  successful match, a partial match (PCRE2_ERROR_PARTIAL), or a
-       failure to match (PCRE2_ERROR_NOMATCH), a mark name may  be  available.
-       The  function pcre2_get_mark() can be called to access this name, which
-       can be specified in the pattern by  any  of  the  backtracking  control
+       After a successful match, a partial match (PCRE2_ERROR_PARTIAL),  or  a
+       failure  to  match (PCRE2_ERROR_NOMATCH), a mark name may be available.
+       The function pcre2_get_mark() can be called to access this name,  which
+       can  be  specified  in  the  pattern by any of the backtracking control
        verbs, not just (*MARK). The same function applies to all the verbs. It
        returns a pointer to the zero-terminated name, which is within the com-
        piled pattern. If no name is available, NULL is returned. The length of
-       the name (excluding the terminating zero) is stored in  the  code  unit
-       that  precedes  the name. You should use this length instead of relying
+       the  name  (excluding  the terminating zero) is stored in the code unit
+       that precedes the name. You should use this length instead  of  relying
        on the terminating zero if the name might contain a binary zero.


-       After a successful match, the name that is returned is  the  last  mark
+       After  a  successful  match, the name that is returned is the last mark
        name encountered on the matching path through the pattern. Instances of
-       backtracking verbs without names do not count. Thus,  for  example,  if
+       backtracking  verbs  without  names do not count. Thus, for example, if
        the matching path contains (*MARK:A)(*PRUNE), the name "A" is returned.
-       After a "no match" or a partial match, the  last  encountered  name  is
+       After  a  "no  match"  or a partial match, the last encountered name is
        returned. For example, consider this pattern:


          ^(*MARK:A)((*MARK:B)a|b)c


-       When  it  matches "bc", the returned name is A. The B mark is "seen" in
-       the first branch of the group, but it is not on the matching  path.  On
-       the  other  hand,  when  this pattern fails to match "bx", the returned
+       When it matches "bc", the returned name is A. The B mark is  "seen"  in
+       the  first  branch of the group, but it is not on the matching path. On
+       the other hand, when this pattern fails to  match  "bx",  the  returned
        name is B.


-       Warning: By default, certain start-of-match optimizations are  used  to
-       give  a  fast "no match" result in some situations. For example, if the
-       anchoring is removed from the pattern above, there is an initial  check
-       for  the  presence  of  "c"  in the subject before running the matching
+       Warning:  By  default, certain start-of-match optimizations are used to
+       give a fast "no match" result in some situations. For example,  if  the
+       anchoring  is removed from the pattern above, there is an initial check
+       for the presence of "c" in the  subject  before  running  the  matching
        engine. This check fails for "bx", causing a match failure without see-
        ing any marks. You can disable the start-of-match optimizations by set-
-       ting the  PCRE2_NO_START_OPTIMIZE  option  for  pcre2_compile()  or  by
+       ting  the  PCRE2_NO_START_OPTIMIZE  option  for  pcre2_compile()  or by
        starting the pattern with (*NO_START_OPT).


-       After  a  successful  match, a partial match, or one of the invalid UTF
-       errors (for example, PCRE2_ERROR_UTF8_ERR5), pcre2_get_startchar()  can
+       After a successful match, a partial match, or one of  the  invalid  UTF
+       errors  (for example, PCRE2_ERROR_UTF8_ERR5), pcre2_get_startchar() can
        be called. After a successful or partial match it returns the code unit
-       offset of the character at which the match started. For  a  non-partial
-       match,  this can be different to the value of ovector[0] if the pattern
-       contains the \K escape sequence. After a partial match,  however,  this
-       value  is  always the same as ovector[0] because \K does not affect the
+       offset  of  the character at which the match started. For a non-partial
+       match, this can be different to the value of ovector[0] if the  pattern
+       contains  the  \K escape sequence. After a partial match, however, this
+       value is always the same as ovector[0] because \K does not  affect  the
        result of a partial match.


-       After a UTF check failure, pcre2_get_startchar() can be used to  obtain
+       After  a UTF check failure, pcre2_get_startchar() can be used to obtain
        the code unit offset of the invalid UTF character. Details are given in
        the pcre2unicode page.


@@ -2862,14 +2863,14 @@

ERROR RETURNS FROM pcre2_match()

-       If pcre2_match() fails, it returns a negative number. This can be  con-
-       verted  to a text string by calling the pcre2_get_error_message() func-
-       tion (see "Obtaining a textual error message" below).   Negative  error
-       codes  are  also  returned  by other functions, and are documented with
-       them. The codes are given names in the header file. If UTF checking  is
+       If  pcre2_match() fails, it returns a negative number. This can be con-
+       verted to a text string by calling the pcre2_get_error_message()  func-
+       tion  (see  "Obtaining a textual error message" below).  Negative error
+       codes are also returned by other functions,  and  are  documented  with
+       them.  The codes are given names in the header file. If UTF checking is
        in force and an invalid UTF subject string is detected, one of a number
-       of UTF-specific negative error codes is returned. Details are given  in
-       the  pcre2unicode  page. The following are the other errors that may be
+       of  UTF-specific negative error codes is returned. Details are given in
+       the pcre2unicode page. The following are the other errors that  may  be
        returned by pcre2_match():


          PCRE2_ERROR_NOMATCH
@@ -2878,20 +2879,20 @@


          PCRE2_ERROR_PARTIAL


-       The subject string did not match, but it did match partially.  See  the
+       The  subject  string did not match, but it did match partially. See the
        pcre2partial documentation for details of partial matching.


          PCRE2_ERROR_BADMAGIC


        PCRE2 stores a 4-byte "magic number" at the start of the compiled code,
-       to catch the case when it is passed a junk pointer. This is  the  error
+       to  catch  the case when it is passed a junk pointer. This is the error
        that is returned when the magic number is not present.


          PCRE2_ERROR_BADMODE


-       This  error is given when a compiled pattern is passed to a function in
-       a library of a different code unit width, for example, a  pattern  com-
-       piled  by  the  8-bit  library  is passed to a 16-bit or 32-bit library
+       This error is given when a compiled pattern is passed to a function  in
+       a  library  of a different code unit width, for example, a pattern com-
+       piled by the 8-bit library is passed to  a  16-bit  or  32-bit  library
        function.


          PCRE2_ERROR_BADOFFSET
@@ -2905,15 +2906,15 @@
          PCRE2_ERROR_BADUTFOFFSET


        The UTF code unit sequence that was passed as a subject was checked and
-       found  to be valid (the PCRE2_NO_UTF_CHECK option was not set), but the
-       value of startoffset did not point to the beginning of a UTF  character
+       found to be valid (the PCRE2_NO_UTF_CHECK option was not set), but  the
+       value  of startoffset did not point to the beginning of a UTF character
        or the end of the subject.


          PCRE2_ERROR_CALLOUT


-       This  error  is never generated by pcre2_match() itself. It is provided
-       for use by callout  functions  that  want  to  cause  pcre2_match()  or
-       pcre2_callout_enumerate()  to  return a distinctive error code. See the
+       This error is never generated by pcre2_match() itself. It  is  provided
+       for  use  by  callout  functions  that  want  to cause pcre2_match() or
+       pcre2_callout_enumerate() to return a distinctive error code.  See  the
        pcre2callout documentation for details.


          PCRE2_ERROR_DEPTHLIMIT
@@ -2926,14 +2927,14 @@


          PCRE2_ERROR_INTERNAL


-       An unexpected internal error has occurred. This error could  be  caused
+       An  unexpected  internal error has occurred. This error could be caused
        by a bug in PCRE2 or by overwriting of the compiled pattern.


          PCRE2_ERROR_JIT_STACKLIMIT


-       This  error  is  returned  when a pattern that was successfully studied
-       using JIT is being matched, but the memory available for  the  just-in-
-       time  processing stack is not large enough. See the pcre2jit documenta-
+       This error is returned when a pattern  that  was  successfully  studied
+       using  JIT  is being matched, but the memory available for the just-in-
+       time processing stack is not large enough. See the pcre2jit  documenta-
        tion for more details.


          PCRE2_ERROR_MATCHLIMIT
@@ -2942,11 +2943,11 @@


          PCRE2_ERROR_NOMEMORY


-       If a pattern contains many nested backtracking points, heap  memory  is
-       used  to  remember them. This error is given when the memory allocation
-       function (default or  custom)  fails.  Note  that  a  different  error,
-       PCRE2_ERROR_HEAPLIMIT,  is given if the amount of memory needed exceeds
-       the   heap   limit.   PCRE2_ERROR_NOMEMORY   is   also   returned    if
+       If  a  pattern contains many nested backtracking points, heap memory is
+       used to remember them. This error is given when the  memory  allocation
+       function  (default  or  custom)  fails.  Note  that  a different error,
+       PCRE2_ERROR_HEAPLIMIT, is given if the amount of memory needed  exceeds
+       the    heap   limit.   PCRE2_ERROR_NOMEMORY   is   also   returned   if
        PCRE2_COPY_MATCHED_SUBJECT is set and memory allocation fails.


          PCRE2_ERROR_NULL
@@ -2955,12 +2956,12 @@


          PCRE2_ERROR_RECURSELOOP


-       This  error  is  returned  when  pcre2_match() detects a recursion loop
-       within the pattern. Specifically, it means that either the  whole  pat-
+       This error is returned when  pcre2_match()  detects  a  recursion  loop
+       within  the  pattern. Specifically, it means that either the whole pat-
        tern or a capture group has been called recursively for the second time
-       at the same position in the subject string. Some simple  patterns  that
-       might  do  this are detected and faulted at compile time, but more com-
-       plicated cases, in particular mutual recursions between  two  different
+       at  the  same position in the subject string. Some simple patterns that
+       might do this are detected and faulted at compile time, but  more  com-
+       plicated  cases,  in particular mutual recursions between two different
        groups, cannot be detected until matching is attempted.



@@ -2969,20 +2970,20 @@
        int pcre2_get_error_message(int errorcode, PCRE2_UCHAR *buffer,
          PCRE2_SIZE bufflen);


-       A  text  message  for  an  error code from any PCRE2 function (compile,
-       match, or auxiliary) can be obtained  by  calling  pcre2_get_error_mes-
-       sage().  The  code  is passed as the first argument, with the remaining
-       two arguments specifying a code unit buffer  and  its  length  in  code
-       units,  into  which the text message is placed. The message is returned
-       in code units of the appropriate width for the library  that  is  being
+       A text message for an error code  from  any  PCRE2  function  (compile,
+       match,  or  auxiliary)  can be obtained by calling pcre2_get_error_mes-
+       sage(). The code is passed as the first argument,  with  the  remaining
+       two  arguments  specifying  a  code  unit buffer and its length in code
+       units, into which the text message is placed. The message  is  returned
+       in  code  units  of the appropriate width for the library that is being
        used.


-       The  returned message is terminated with a trailing zero, and the func-
-       tion returns the number of code  units  used,  excluding  the  trailing
+       The returned message is terminated with a trailing zero, and the  func-
+       tion  returns  the  number  of  code units used, excluding the trailing
        zero.  If  the  error  number  is  unknown,  the  negative  error  code
-       PCRE2_ERROR_BADDATA is returned. If the buffer is too small,  the  mes-
-       sage  is  truncated  (but still with a trailing zero), and the negative
-       error code PCRE2_ERROR_NOMEMORY is returned.  None of the messages  are
+       PCRE2_ERROR_BADDATA  is  returned. If the buffer is too small, the mes-
+       sage is truncated (but still with a trailing zero),  and  the  negative
+       error  code PCRE2_ERROR_NOMEMORY is returned.  None of the messages are
        very long; a buffer size of 120 code units is ample.



@@ -3001,39 +3002,39 @@

        void pcre2_substring_free(PCRE2_UCHAR *buffer);


-       Captured  substrings  can  be accessed directly by using the ovector as
+       Captured substrings can be accessed directly by using  the  ovector  as
        described above.  For convenience, auxiliary functions are provided for
-       extracting   captured  substrings  as  new,  separate,  zero-terminated
+       extracting  captured  substrings  as  new,  separate,   zero-terminated
        strings. A substring that contains a binary zero is correctly extracted
-       and  has  a  further  zero  added on the end, but the result is not, of
+       and has a further zero added on the end, but  the  result  is  not,  of
        course, a C string.


        The functions in this section identify substrings by number. The number
        zero refers to the entire matched substring, with higher numbers refer-
-       ring to substrings captured by parenthesized groups.  After  a  partial
-       match,  only  substring  zero  is  available. An attempt to extract any
-       other substring gives the error PCRE2_ERROR_PARTIAL. The  next  section
+       ring  to  substrings  captured by parenthesized groups. After a partial
+       match, only substring zero is available.  An  attempt  to  extract  any
+       other  substring  gives the error PCRE2_ERROR_PARTIAL. The next section
        describes similar functions for extracting captured substrings by name.


-       If  a  pattern uses the \K escape sequence within a positive assertion,
+       If a pattern uses the \K escape sequence within a  positive  assertion,
        the reported start of a successful match can be greater than the end of
-       the  match.   For  example,  if the pattern (?=ab\K) is matched against
-       "ab", the start and end offset values for the match are  2  and  0.  In
-       this  situation,  calling  these functions with a zero substring number
+       the match.  For example, if the pattern  (?=ab\K)  is  matched  against
+       "ab",  the  start  and  end offset values for the match are 2 and 0. In
+       this situation, calling these functions with a  zero  substring  number
        extracts a zero-length empty string.


-       You can find the length in code units of a captured  substring  without
-       extracting  it  by calling pcre2_substring_length_bynumber(). The first
-       argument is a pointer to the match data block, the second is the  group
-       number,  and the third is a pointer to a variable into which the length
-       is placed. If you just want to know whether or not  the  substring  has
+       You  can  find the length in code units of a captured substring without
+       extracting it by calling pcre2_substring_length_bynumber().  The  first
+       argument  is a pointer to the match data block, the second is the group
+       number, and the third is a pointer to a variable into which the  length
+       is  placed.  If  you just want to know whether or not the substring has
        been captured, you can pass the third argument as NULL.


-       The  pcre2_substring_copy_bynumber()  function  copies  a captured sub-
-       string into a supplied buffer,  whereas  pcre2_substring_get_bynumber()
-       copies  it  into  new memory, obtained using the same memory allocation
-       function that was used for the match data block. The  first  two  argu-
-       ments  of  these  functions are a pointer to the match data block and a
+       The pcre2_substring_copy_bynumber() function  copies  a  captured  sub-
+       string  into  a supplied buffer, whereas pcre2_substring_get_bynumber()
+       copies it into new memory, obtained using the  same  memory  allocation
+       function  that  was  used for the match data block. The first two argu-
+       ments of these functions are a pointer to the match data  block  and  a
        capture group number.


        The final arguments of pcre2_substring_copy_bynumber() are a pointer to
@@ -3042,25 +3043,25 @@
        for the extracted substring, excluding the terminating zero.


        For pcre2_substring_get_bynumber() the third and fourth arguments point
-       to variables that are updated with a pointer to the new memory and  the
-       number  of  code units that comprise the substring, again excluding the
-       terminating zero. When the substring is no longer  needed,  the  memory
+       to  variables that are updated with a pointer to the new memory and the
+       number of code units that comprise the substring, again  excluding  the
+       terminating  zero.  When  the substring is no longer needed, the memory
        should be freed by calling pcre2_substring_free().


-       The  return  value  from  all these functions is zero for success, or a
-       negative error code. If the pattern match  failed,  the  match  failure
-       code  is  returned.   If  a  substring number greater than zero is used
-       after a partial match, PCRE2_ERROR_PARTIAL is returned. Other  possible
+       The return value from all these functions is zero  for  success,  or  a
+       negative  error  code.  If  the pattern match failed, the match failure
+       code is returned.  If a substring number  greater  than  zero  is  used
+       after  a partial match, PCRE2_ERROR_PARTIAL is returned. Other possible
        error codes are:


          PCRE2_ERROR_NOMEMORY


-       The  buffer  was  too small for pcre2_substring_copy_bynumber(), or the
+       The buffer was too small for  pcre2_substring_copy_bynumber(),  or  the
        attempt to get memory failed for pcre2_substring_get_bynumber().


          PCRE2_ERROR_NOSUBSTRING


-       There is no substring with that number in the  pattern,  that  is,  the
+       There  is  no  substring  with that number in the pattern, that is, the
        number is greater than the number of capturing parentheses.


          PCRE2_ERROR_UNAVAILABLE
@@ -3071,8 +3072,8 @@


          PCRE2_ERROR_UNSET


-       The  substring  did  not  participate in the match. For example, if the
-       pattern is (abc)|(def) and the subject is "def", and the  ovector  con-
+       The substring did not participate in the match.  For  example,  if  the
+       pattern  is  (abc)|(def) and the subject is "def", and the ovector con-
        tains at least two capturing slots, substring number 1 is unset.



@@ -3083,31 +3084,31 @@

        void pcre2_substring_list_free(PCRE2_SPTR *list);


-       The  pcre2_substring_list_get()  function  extracts  all available sub-
-       strings and builds a list of pointers to  them.  It  also  (optionally)
-       builds  a  second  list  that  contains  their lengths (in code units),
+       The pcre2_substring_list_get() function  extracts  all  available  sub-
+       strings  and  builds  a  list of pointers to them. It also (optionally)
+       builds a second list that  contains  their  lengths  (in  code  units),
        excluding a terminating zero that is added to each of them. All this is
        done in a single block of memory that is obtained using the same memory
        allocation function that was used to get the match data block.


-       This function must be called only after a successful match.  If  called
+       This  function  must be called only after a successful match. If called
        after a partial match, the error code PCRE2_ERROR_PARTIAL is returned.


-       The  address of the memory block is returned via listptr, which is also
+       The address of the memory block is returned via listptr, which is  also
        the start of the list of string pointers. The end of the list is marked
-       by  a  NULL pointer. The address of the list of lengths is returned via
-       lengthsptr. If your strings do not contain binary zeros and you do  not
+       by a NULL pointer. The address of the list of lengths is  returned  via
+       lengthsptr.  If your strings do not contain binary zeros and you do not
        therefore need the lengths, you may supply NULL as the lengthsptr argu-
-       ment to disable the creation of a list of lengths.  The  yield  of  the
-       function  is zero if all went well, or PCRE2_ERROR_NOMEMORY if the mem-
-       ory block could not be obtained. When the list is no longer needed,  it
+       ment  to  disable  the  creation of a list of lengths. The yield of the
+       function is zero if all went well, or PCRE2_ERROR_NOMEMORY if the  mem-
+       ory  block could not be obtained. When the list is no longer needed, it
        should be freed by calling pcre2_substring_list_free().


        If this function encounters a substring that is unset, which can happen
-       when capture group number n+1 matches some part  of  the  subject,  but
-       group  n has not been used at all, it returns an empty string. This can
+       when  capture  group  number  n+1 matches some part of the subject, but
+       group n has not been used at all, it returns an empty string. This  can
        be distinguished from a genuine zero-length substring by inspecting the
-       appropriate  offset in the ovector, which contain PCRE2_UNSET for unset
+       appropriate offset in the ovector, which contain PCRE2_UNSET for  unset
        substrings, or by calling pcre2_substring_length_bynumber().



@@ -3127,7 +3128,7 @@

        void pcre2_substring_free(PCRE2_UCHAR *buffer);


-       To extract a substring by name, you first have to find associated  num-
+       To  extract a substring by name, you first have to find associated num-
        ber.  For example, for this pattern:


          (a+)b(?<xxx>\d+)...
@@ -3135,32 +3136,32 @@
        the number of the capture group called "xxx" is 2. If the name is known
        to be unique (PCRE2_DUPNAMES was not set), you can find the number from
        the name by calling pcre2_substring_number_from_name(). The first argu-
-       ment is the compiled pattern, and the second is the name. The yield  of
-       the  function  is the group number, PCRE2_ERROR_NOSUBSTRING if there is
-       no group with that name, or PCRE2_ERROR_NOUNIQUESUBSTRING if  there  is
-       more  than one group with that name.  Given the number, you can extract
-       the substring directly from the ovector, or use one of  the  "bynumber"
+       ment  is the compiled pattern, and the second is the name. The yield of
+       the function is the group number, PCRE2_ERROR_NOSUBSTRING if  there  is
+       no  group  with that name, or PCRE2_ERROR_NOUNIQUESUBSTRING if there is
+       more than one group with that name.  Given the number, you can  extract
+       the  substring  directly from the ovector, or use one of the "bynumber"
        functions described above.


-       For  convenience,  there are also "byname" functions that correspond to
-       the "bynumber" functions, the only difference  being  that  the  second
-       argument  is  a  name instead of a number. If PCRE2_DUPNAMES is set and
+       For convenience, there are also "byname" functions that  correspond  to
+       the  "bynumber"  functions,  the  only difference being that the second
+       argument is a name instead of a number. If PCRE2_DUPNAMES  is  set  and
        there are duplicate names, these functions scan all the groups with the
-       given  name,  and  return  the  captured substring from the first named
+       given name, and return the captured  substring  from  the  first  named
        group that is set.


-       If there are no groups with the given name, PCRE2_ERROR_NOSUBSTRING  is
-       returned.  If  all  groups  with the name have numbers that are greater
-       than the number of slots in  the  ovector,  PCRE2_ERROR_UNAVAILABLE  is
-       returned.  If  there  is at least one group with a slot in the ovector,
+       If  there are no groups with the given name, PCRE2_ERROR_NOSUBSTRING is
+       returned. If all groups with the name have  numbers  that  are  greater
+       than  the  number  of  slots in the ovector, PCRE2_ERROR_UNAVAILABLE is
+       returned. If there is at least one group with a slot  in  the  ovector,
        but no group is found to be set, PCRE2_ERROR_UNSET is returned.


        Warning: If the pattern uses the (?| feature to set up multiple capture
-       groups  with  the same number, as described in the section on duplicate
+       groups with the same number, as described in the section  on  duplicate
        group numbers in the pcre2pattern page, you cannot use names to distin-
-       guish  the  different capture groups, because names are not included in
-       the compiled code. The matching process uses  only  numbers.  For  this
-       reason,  the  use  of  different  names for groups with the same number
+       guish the different capture groups, because names are not  included  in
+       the  compiled  code.  The  matching process uses only numbers. For this
+       reason, the use of different names for  groups  with  the  same  number
        causes an error at compile time.



@@ -3173,54 +3174,54 @@
          PCRE2_SIZE rlength, PCRE2_UCHAR *outputbuffer,
          PCRE2_SIZE *outlengthptr);


-       This function calls pcre2_match() and then makes a copy of the  subject
-       string  in  outputbuffer, replacing one or more parts that were matched
+       This  function calls pcre2_match() and then makes a copy of the subject
+       string in outputbuffer, replacing one or more parts that  were  matched
        with the replacement string, whose length is supplied in rlength.  This
-       can  be  given  as  PCRE2_ZERO_TERMINATED for a zero-terminated string.
-       The default is to perform just one replacement, but there is an  option
-       that  requests multiple replacements (see PCRE2_SUBSTITUTE_GLOBAL below
+       can be given as PCRE2_ZERO_TERMINATED  for  a  zero-terminated  string.
+       The  default is to perform just one replacement, but there is an option
+       that requests multiple replacements (see PCRE2_SUBSTITUTE_GLOBAL  below
        for details).


-       Matches in which a \K item in a lookahead in  the  pattern  causes  the
-       match  to  end  before it starts are not supported, and give rise to an
+       Matches  in  which  a  \K item in a lookahead in the pattern causes the
+       match to end before it starts are not supported, and give  rise  to  an
        error return. For global replacements, matches in which \K in a lookbe-
-       hind  causes the match to start earlier than the point that was reached
+       hind causes the match to start earlier than the point that was  reached
        in the previous iteration are also not supported.


-       The first seven arguments of pcre2_substitute() are  the  same  as  for
+       The  first  seven  arguments  of pcre2_substitute() are the same as for
        pcre2_match(), except that the partial matching options are not permit-
-       ted, and match_data may be passed as NULL, in which case a  match  data
-       block  is obtained and freed within this function, using memory manage-
-       ment functions from the match context, if provided, or else those  that
+       ted,  and  match_data may be passed as NULL, in which case a match data
+       block is obtained and freed within this function, using memory  manage-
+       ment  functions from the match context, if provided, or else those that
        were used to allocate memory for the compiled code.


-       If  an  external  match_data block is provided, its contents afterwards
-       are those set by the final call to pcre2_match(). For  global  changes,
-       this  will  have ended in a matching error. The contents of the ovector
+       If an external match_data block is provided,  its  contents  afterwards
+       are  those  set by the final call to pcre2_match(). For global changes,
+       this will have ended in a matching error. The contents of  the  ovector
        within the match data block may or may not have been changed.


-       The outlengthptr argument must point to a variable  that  contains  the
-       length,  in  code  units, of the output buffer. If the function is suc-
-       cessful, the value is updated to contain the length of the new  string,
+       The  outlengthptr  argument  must point to a variable that contains the
+       length, in code units, of the output buffer. If the  function  is  suc-
+       cessful,  the value is updated to contain the length of the new string,
        excluding the trailing zero that is automatically added.


-       If  the  function  is  not  successful,  the value set via outlengthptr
-       depends on the type of error. For  syntax  errors  in  the  replacement
-       string,  the  value  is  the offset in the replacement string where the
-       error was detected. For other  errors,  the  value  is  PCRE2_UNSET  by
-       default.  This  includes the case of the output buffer being too small,
-       unless PCRE2_SUBSTITUTE_OVERFLOW_LENGTH is set (see  below),  in  which
-       case  the  value  is the minimum length needed, including space for the
-       trailing zero. Note that in  order  to  compute  the  required  length,
-       pcre2_substitute()  has  to  simulate  all  the  matching  and copying,
+       If the function is not  successful,  the  value  set  via  outlengthptr
+       depends  on  the  type  of  error. For syntax errors in the replacement
+       string, the value is the offset in the  replacement  string  where  the
+       error  was  detected.  For  other  errors,  the value is PCRE2_UNSET by
+       default. This includes the case of the output buffer being  too  small,
+       unless  PCRE2_SUBSTITUTE_OVERFLOW_LENGTH  is  set (see below), in which
+       case the value is the minimum length needed, including  space  for  the
+       trailing  zero.  Note  that  in  order  to compute the required length,
+       pcre2_substitute() has  to  simulate  all  the  matching  and  copying,
        instead of giving an error return as soon as the buffer overflows. Note
        also that the length is in code units, not bytes.


-       In  the replacement string, which is interpreted as a UTF string in UTF
-       mode, and is checked for UTF  validity  unless  the  PCRE2_NO_UTF_CHECK
+       In the replacement string, which is interpreted as a UTF string in  UTF
+       mode,  and  is  checked  for UTF validity unless the PCRE2_NO_UTF_CHECK
        option is set, a dollar character is an escape character that can spec-
-       ify the insertion of characters  from  capture  groups  or  names  from
-       (*MARK)  or other control verbs in the pattern. The following forms are
+       ify  the  insertion  of  characters  from  capture groups or names from
+       (*MARK) or other control verbs in the pattern. The following forms  are
        always recognized:


          $$                  insert a dollar character
@@ -3227,18 +3228,18 @@
          $<n> or ${<n>}      insert the contents of group <n>
          $*MARK or ${*MARK}  insert a control verb name


-       Either a group number or a group name  can  be  given  for  <n>.  Curly
-       brackets  are  required only if the following character would be inter-
+       Either  a  group  number  or  a  group name can be given for <n>. Curly
+       brackets are required only if the following character would  be  inter-
        preted as part of the number or name. The number may be zero to include
-       the  entire  matched  string.   For  example,  if  the pattern a(b)c is
-       matched with "=abc=" and the replacement string "+$1$0$1+", the  result
+       the entire matched string.   For  example,  if  the  pattern  a(b)c  is
+       matched  with "=abc=" and the replacement string "+$1$0$1+", the result
        is "=+babcb+=".


-       $*MARK  inserts the name from the last encountered backtracking control
-       verb on the matching path that has a name. (*MARK) must always  include
-       a  name,  but  the  other  verbs  need not. For example, in the case of
+       $*MARK inserts the name from the last encountered backtracking  control
+       verb  on the matching path that has a name. (*MARK) must always include
+       a name, but the other verbs need not.  For  example,  in  the  case  of
        (*MARK:A)(*PRUNE) the name inserted is "A", but for (*MARK:A)(*PRUNE:B)
-       the  relevant  name is "B". This facility can be used to perform simple
+       the relevant name is "B". This facility can be used to  perform  simple
        simultaneous substitutions, as this pcre2test example shows:


          /(*MARK:pear)apple|(*MARK:orange)lemon/g,replace=${*MARK}
@@ -3245,19 +3246,19 @@
              apple lemon
           2: pear orange


-       As well as the usual options for pcre2_match(), a number of  additional
+       As  well as the usual options for pcre2_match(), a number of additional
        options can be set in the options argument of pcre2_substitute().


        PCRE2_SUBSTITUTE_GLOBAL causes the function to iterate over the subject
-       string, replacing every matching substring. If this option is not  set,
-       only  the  first matching substring is replaced. The search for matches
-       takes place in the original subject string (that is, previous  replace-
-       ments  do  not  affect  it).  Iteration is implemented by advancing the
-       startoffset value for each search, which is always  passed  the  entire
+       string,  replacing every matching substring. If this option is not set,
+       only the first matching substring is replaced. The search  for  matches
+       takes  place in the original subject string (that is, previous replace-
+       ments do not affect it).  Iteration is  implemented  by  advancing  the
+       startoffset  value  for  each search, which is always passed the entire
        subject string. If an offset limit is set in the match context, search-
        ing stops when that limit is reached.


-       You can restrict the effect of a global substitution to  a  portion  of
+       You  can  restrict  the effect of a global substitution to a portion of
        the subject string by setting either or both of startoffset and an off-
        set limit. Here is a pcre2test example:


@@ -3265,88 +3266,88 @@
          ABC ABC ABC ABC\=offset=3,offset_limit=12
           2: ABC A!C A!C ABC


-       When continuing with global substitutions after  matching  a  substring
+       When  continuing  with  global substitutions after matching a substring
        with zero length, an attempt to find a non-empty match at the same off-
        set is performed.  If this is not successful, the offset is advanced by
        one character except when CRLF is a valid newline sequence and the next
-       two characters are CR, LF. In this case, the offset is advanced by  two
+       two  characters are CR, LF. In this case, the offset is advanced by two
        characters.


-       PCRE2_SUBSTITUTE_OVERFLOW_LENGTH  changes  what happens when the output
+       PCRE2_SUBSTITUTE_OVERFLOW_LENGTH changes what happens when  the  output
        buffer is too small. The default action is to return PCRE2_ERROR_NOMEM-
-       ORY  immediately.  If  this  option is set, however, pcre2_substitute()
+       ORY immediately. If this option  is  set,  however,  pcre2_substitute()
        continues to go through the motions of matching and substituting (with-
-       out,  of course, writing anything) in order to compute the size of buf-
-       fer that is needed. This value is  passed  back  via  the  outlengthptr
-       variable,    with    the   result   of   the   function   still   being
+       out, of course, writing anything) in order to compute the size of  buf-
+       fer  that  is  needed.  This  value is passed back via the outlengthptr
+       variable,   with   the   result   of   the   function    still    being
        PCRE2_ERROR_NOMEMORY.


-       Passing a buffer size of zero is a permitted way  of  finding  out  how
-       much  memory  is needed for given substitution. However, this does mean
+       Passing  a  buffer  size  of zero is a permitted way of finding out how
+       much memory is needed for given substitution. However, this  does  mean
        that the entire operation is carried out twice. Depending on the appli-
-       cation,  it  may  be more efficient to allocate a large buffer and free
-       the  excess  afterwards,  instead   of   using   PCRE2_SUBSTITUTE_OVER-
+       cation, it may be more efficient to allocate a large  buffer  and  free
+       the   excess   afterwards,   instead  of  using  PCRE2_SUBSTITUTE_OVER-
        FLOW_LENGTH.


        PCRE2_SUBSTITUTE_UNKNOWN_UNSET causes references to capture groups that
        do not appear in the pattern to be treated as unset groups. This option
-       should  be used with care, because it means that a typo in a group name
+       should be used with care, because it means that a typo in a group  name
        or number no longer causes the PCRE2_ERROR_NOSUBSTRING error.


-       PCRE2_SUBSTITUTE_UNSET_EMPTY causes  unset  capture  groups  (including
+       PCRE2_SUBSTITUTE_UNSET_EMPTY  causes  unset  capture  groups (including
        unknown  groups  when  PCRE2_SUBSTITUTE_UNKNOWN_UNSET  is  set)  to  be
-       treated as empty strings when inserted  as  described  above.  If  this
-       option  is  not  set,  an  attempt  to insert an unset group causes the
-       PCRE2_ERROR_UNSET error. This option does not  influence  the  extended
+       treated  as  empty  strings  when  inserted as described above. If this
+       option is not set, an attempt to  insert  an  unset  group  causes  the
+       PCRE2_ERROR_UNSET  error.  This  option does not influence the extended
        substitution syntax described below.


-       PCRE2_SUBSTITUTE_EXTENDED  causes extra processing to be applied to the
-       replacement string. Without this option, only the dollar  character  is
-       special,  and  only  the  group insertion forms listed above are valid.
+       PCRE2_SUBSTITUTE_EXTENDED causes extra processing to be applied to  the
+       replacement  string.  Without this option, only the dollar character is
+       special, and only the group insertion forms  listed  above  are  valid.
        When PCRE2_SUBSTITUTE_EXTENDED is set, two things change:


-       Firstly, backslash in a replacement string is interpreted as an  escape
+       Firstly,  backslash in a replacement string is interpreted as an escape
        character. The usual forms such as \n or \x{ddd} can be used to specify
-       particular character codes, and backslash followed by any  non-alphanu-
-       meric  character  quotes  that character. Extended quoting can be coded
+       particular  character codes, and backslash followed by any non-alphanu-
+       meric character quotes that character. Extended quoting  can  be  coded
        using \Q...\E, exactly as in pattern strings.


-       There are also four escape sequences for forcing the case  of  inserted
-       letters.   The  insertion  mechanism has three states: no case forcing,
+       There  are  also four escape sequences for forcing the case of inserted
+       letters.  The insertion mechanism has three states:  no  case  forcing,
        force upper case, and force lower case. The escape sequences change the
        current state: \U and \L change to upper or lower case forcing, respec-
-       tively, and \E (when not terminating a \Q quoted sequence)  reverts  to
-       no  case  forcing. The sequences \u and \l force the next character (if
-       it is a letter) to upper or lower  case,  respectively,  and  then  the
+       tively,  and  \E (when not terminating a \Q quoted sequence) reverts to
+       no case forcing. The sequences \u and \l force the next  character  (if
+       it  is  a  letter)  to  upper or lower case, respectively, and then the
        state automatically reverts to no case forcing. Case forcing applies to
-       all inserted  characters, including those from capture groups and  let-
+       all  inserted  characters, including those from capture groups and let-
        ters within \Q...\E quoted sequences.


        Note that case forcing sequences such as \U...\E do not nest. For exam-
-       ple, the result of processing "\Uaa\LBB\Ecc\E" is "AAbbcc";  the  final
-       \E   has   no   effect.   Note   also   that   the  PCRE2_ALT_BSUX  and
-       PCRE2_EXTRA_ALT_BSUX options do not apply to not apply  to  replacement
+       ple,  the  result of processing "\Uaa\LBB\Ecc\E" is "AAbbcc"; the final
+       \E  has  no   effect.   Note   also   that   the   PCRE2_ALT_BSUX   and
+       PCRE2_EXTRA_ALT_BSUX  options  do not apply to not apply to replacement
        strings.


-       The  second  effect of setting PCRE2_SUBSTITUTE_EXTENDED is to add more
-       flexibility to capture group substitution. The  syntax  is  similar  to
+       The second effect of setting PCRE2_SUBSTITUTE_EXTENDED is to  add  more
+       flexibility  to  capture  group  substitution. The syntax is similar to
        that used by Bash:


          ${<n>:-<string>}
          ${<n>:+<string1>:<string2>}


-       As  before,  <n> may be a group number or a name. The first form speci-
-       fies a default value. If group <n> is set, its value  is  inserted;  if
-       not,  <string>  is  expanded  and  the result inserted. The second form
-       specifies strings that are expanded and inserted when group <n> is  set
-       or  unset,  respectively. The first form is just a convenient shorthand
+       As before, <n> may be a group number or a name. The first  form  speci-
+       fies  a  default  value. If group <n> is set, its value is inserted; if
+       not, <string> is expanded and the  result  inserted.  The  second  form
+       specifies  strings that are expanded and inserted when group <n> is set
+       or unset, respectively. The first form is just a  convenient  shorthand
        for


          ${<n>:+${<n>}:<string>}


-       Backslash can be used to escape colons and closing  curly  brackets  in
-       the  replacement  strings.  A change of the case forcing state within a
-       replacement string remains  in  force  afterwards,  as  shown  in  this
+       Backslash  can  be  used to escape colons and closing curly brackets in
+       the replacement strings. A change of the case forcing  state  within  a
+       replacement  string  remains  in  force  afterwards,  as  shown in this
        pcre2test example:


          /(some)?(body)/substitute_extended,replace=${1:+\U:\L}HeLLo
@@ -3355,16 +3356,16 @@
              somebody
           1: HELLO


-       The  PCRE2_SUBSTITUTE_UNSET_EMPTY option does not affect these extended
-       substitutions.  However,  PCRE2_SUBSTITUTE_UNKNOWN_UNSET   does   cause
+       The PCRE2_SUBSTITUTE_UNSET_EMPTY option does not affect these  extended
+       substitutions.   However,   PCRE2_SUBSTITUTE_UNKNOWN_UNSET  does  cause
        unknown groups in the extended syntax forms to be treated as unset.


-       If  successful,  pcre2_substitute()  returns  the  number of successful
-       matches. This may be zero if  no  matches  were  found,  and  is  never
+       If successful, pcre2_substitute()  returns  the  number  of  successful
+       matches.  This  may  be  zero  if  no  matches were found, and is never
        greater than 1 unless PCRE2_SUBSTITUTE_GLOBAL is set.


        In the event of an error, a negative error code is returned. Except for
-       PCRE2_ERROR_NOMATCH   (which   is   never   returned),   errors    from
+       PCRE2_ERROR_NOMATCH    (which   is   never   returned),   errors   from
        pcre2_match() are passed straight back.


        PCRE2_ERROR_NOSUBSTRING is returned for a non-existent substring inser-
@@ -3371,26 +3372,26 @@
        tion, unless PCRE2_SUBSTITUTE_UNKNOWN_UNSET is set.


        PCRE2_ERROR_UNSET is returned for an unset substring insertion (includ-
-       ing  an  unknown  substring when PCRE2_SUBSTITUTE_UNKNOWN_UNSET is set)
+       ing an unknown substring when  PCRE2_SUBSTITUTE_UNKNOWN_UNSET  is  set)
        when  the  simple  (non-extended)  syntax  is  used  and  PCRE2_SUBSTI-
        TUTE_UNSET_EMPTY is not set.


-       PCRE2_ERROR_NOMEMORY  is  returned  if  the  output  buffer  is not big
+       PCRE2_ERROR_NOMEMORY is returned  if  the  output  buffer  is  not  big
        enough. If the PCRE2_SUBSTITUTE_OVERFLOW_LENGTH option is set, the size
-       of  buffer  that is needed is returned via outlengthptr. Note that this
+       of buffer that is needed is returned via outlengthptr. Note  that  this
        does not happen by default.


-       PCRE2_ERROR_BADREPLACEMENT is used for miscellaneous syntax  errors  in
+       PCRE2_ERROR_BADREPLACEMENT  is  used for miscellaneous syntax errors in
        the   replacement   string,   with   more   particular   errors   being
-       PCRE2_ERROR_BADREPESCAPE (invalid  escape  sequence),  PCRE2_ERROR_REP-
-       MISSINGBRACE  (closing curly bracket not found), PCRE2_ERROR_BADSUBSTI-
+       PCRE2_ERROR_BADREPESCAPE  (invalid  escape  sequence), PCRE2_ERROR_REP-
+       MISSINGBRACE (closing curly bracket not found),  PCRE2_ERROR_BADSUBSTI-
        TUTION   (syntax   error   in   extended   group   substitution),   and
-       PCRE2_ERROR_BADSUBSPATTERN  (the  pattern match ended before it started
-       or the match started earlier than the current position in the  subject,
+       PCRE2_ERROR_BADSUBSPATTERN (the pattern match ended before  it  started
+       or  the match started earlier than the current position in the subject,
        which can happen if \K is used in an assertion).


        As for all PCRE2 errors, a text message that describes the error can be
-       obtained  by  calling  the  pcre2_get_error_message()   function   (see
+       obtained   by   calling  the  pcre2_get_error_message()  function  (see
        "Obtaining a textual error message" above).


    Substitution callouts
@@ -3399,15 +3400,15 @@
          int (*callout_function)(pcre2_substitute_callout_block *, void *),
          void *callout_data);


-       The  pcre2_set_substitution_callout() function can be used to specify a
-       callout function for pcre2_substitute(). This information is passed  in
+       The pcre2_set_substitution_callout() function can be used to specify  a
+       callout  function for pcre2_substitute(). This information is passed in
        a match context. The callout function is called after each substitution
        has been processed, but it can cause the replacement not to happen. The
-       callout  function is not called for simulated substitutions that happen
+       callout function is not called for simulated substitutions that  happen
        as a result of the PCRE2_SUBSTITUTE_OVERFLOW_LENGTH option.


        The first argument of the callout function is a pointer to a substitute
-       callout  block structure, which contains the following fields, not nec-
+       callout block structure, which contains the following fields, not  nec-
        essarily in this order:


          uint32_t    version;
@@ -3418,9 +3419,9 @@
          uint32_t    oveccount;
          PCRE2_SIZE  output_offsets[2];


-       The version field contains the version number of the block format.  The
-       current  version  is  0.  The version number will increase in future if
-       more fields are added, but the intention is never to remove any of  the
+       The  version field contains the version number of the block format. The
+       current version is 0. The version number will  increase  in  future  if
+       more  fields are added, but the intention is never to remove any of the
        existing fields.


        The subscount field is the number of the current match. It is 1 for the
@@ -3427,25 +3428,25 @@
        first callout, 2 for the second, and so on. The input and output point-
        ers are copies of the values passed to pcre2_substitute().


-       The  ovector  field points to the ovector, which contains the result of
+       The ovector field points to the ovector, which contains the  result  of
        the most recent match. The oveccount field contains the number of pairs
        that are set in the ovector, and is always greater than zero.


-       The  output_offsets  vector  contains the offsets of the replacement in
-       the output string. This has already been processed for dollar  and  (if
+       The output_offsets vector contains the offsets of  the  replacement  in
+       the  output  string. This has already been processed for dollar and (if
        requested) backslash substitutions as described above.


-       The  second  argument  of  the  callout function is the value passed as
-       callout_data when the function was registered. The  value  returned  by
+       The second argument of the callout function  is  the  value  passed  as
+       callout_data  when  the  function was registered. The value returned by
        the callout function is interpreted as follows:


-       If  the  value is zero, the replacement is accepted, and, if PCRE2_SUB-
-       STITUTE_GLOBAL is set, processing continues with a search for the  next
-       match.  If  the  value  is  not  zero,  the  current replacement is not
-       accepted. If the value is greater than zero, processing continues  when
-       PCRE2_SUBSTITUTE_GLOBAL  is set. Otherwise (the value is less than zero
-       or PCRE2_SUBSTITUTE_GLOBAL is not set), the the rest of  the  input  is
-       copied  to the output and the call to pcre2_substitute() exits, return-
+       If the value is zero, the replacement is accepted, and,  if  PCRE2_SUB-
+       STITUTE_GLOBAL  is set, processing continues with a search for the next
+       match. If the value  is  not  zero,  the  current  replacement  is  not
+       accepted.  If the value is greater than zero, processing continues when
+       PCRE2_SUBSTITUTE_GLOBAL is set. Otherwise (the value is less than  zero
+       or  PCRE2_SUBSTITUTE_GLOBAL  is  not set), the the rest of the input is
+       copied to the output and the call to pcre2_substitute() exits,  return-
        ing the number of matches so far.



@@ -3454,56 +3455,56 @@
        int pcre2_substring_nametable_scan(const pcre2_code *code,
          PCRE2_SPTR name, PCRE2_SPTR *first, PCRE2_SPTR *last);


-       When a pattern is compiled with the PCRE2_DUPNAMES  option,  names  for
-       capture  groups  are  not  required  to  be unique. Duplicate names are
-       always allowed for groups with the same number, created  by  using  the
+       When  a  pattern  is compiled with the PCRE2_DUPNAMES option, names for
+       capture groups are not required  to  be  unique.  Duplicate  names  are
+       always  allowed  for  groups with the same number, created by using the
        (?| feature. Indeed, if such groups are named, they are required to use
        the same names.


-       Normally, patterns that use duplicate names are such that  in  any  one
-       match,  only  one of each set of identically-named groups participates.
+       Normally,  patterns  that  use duplicate names are such that in any one
+       match, only one of each set of identically-named  groups  participates.
        An example is shown in the pcre2pattern documentation.


-       When  duplicates   are   present,   pcre2_substring_copy_byname()   and
-       pcre2_substring_get_byname()  return  the first substring corresponding
-       to  the  given  name  that  is  set.  Only   if   none   are   set   is
-       PCRE2_ERROR_UNSET  is  returned. The pcre2_substring_number_from_name()
+       When   duplicates   are   present,   pcre2_substring_copy_byname()  and
+       pcre2_substring_get_byname() return the first  substring  corresponding
+       to   the   given   name   that   is  set.  Only  if  none  are  set  is
+       PCRE2_ERROR_UNSET is returned.  The  pcre2_substring_number_from_name()
        function returns the error PCRE2_ERROR_NOUNIQUESUBSTRING when there are
        duplicate names.


-       If  you want to get full details of all captured substrings for a given
-       name, you must use the pcre2_substring_nametable_scan()  function.  The
-       first  argument is the compiled pattern, and the second is the name. If
-       the third and fourth arguments are NULL, the function returns  a  group
+       If you want to get full details of all captured substrings for a  given
+       name,  you  must use the pcre2_substring_nametable_scan() function. The
+       first argument is the compiled pattern, and the second is the name.  If
+       the  third  and fourth arguments are NULL, the function returns a group
        number for a unique name, or PCRE2_ERROR_NOUNIQUESUBSTRING otherwise.


        When the third and fourth arguments are not NULL, they must be pointers
-       to variables that are updated by the function. After it has  run,  they
+       to  variables  that are updated by the function. After it has run, they
        point to the first and last entries in the name-to-number table for the
-       given name, and the function returns the length of each entry  in  code
-       units.  In both cases, PCRE2_ERROR_NOSUBSTRING is returned if there are
+       given  name,  and the function returns the length of each entry in code
+       units. In both cases, PCRE2_ERROR_NOSUBSTRING is returned if there  are
        no entries for the given name.


        The format of the name table is described above in the section entitled
-       Information  about  a  pattern.  Given all the relevant entries for the
-       name, you can extract each of their numbers,  and  hence  the  captured
+       Information about a pattern. Given all the  relevant  entries  for  the
+       name,  you  can  extract  each of their numbers, and hence the captured
        data.



FINDING ALL POSSIBLE MATCHES AT ONE POSITION

-       The  traditional  matching  function  uses a similar algorithm to Perl,
-       which stops when it finds the first match at a given point in the  sub-
+       The traditional matching function uses a  similar  algorithm  to  Perl,
+       which  stops when it finds the first match at a given point in the sub-
        ject. If you want to find all possible matches, or the longest possible
-       match at a given position,  consider  using  the  alternative  matching
-       function  (see  below) instead. If you cannot use the alternative func-
+       match  at  a  given  position,  consider using the alternative matching
+       function (see below) instead. If you cannot use the  alternative  func-
        tion, you can kludge it up by making use of the callout facility, which
        is described in the pcre2callout documentation.


        What you have to do is to insert a callout right at the end of the pat-
-       tern.  When your callout function is called, extract and save the  cur-
-       rent  matched  substring.  Then return 1, which forces pcre2_match() to
-       backtrack and try other alternatives. Ultimately, when it runs  out  of
+       tern.   When your callout function is called, extract and save the cur-
+       rent matched substring. Then return 1, which  forces  pcre2_match()  to
+       backtrack  and  try other alternatives. Ultimately, when it runs out of
        matches, pcre2_match() will yield PCRE2_ERROR_NOMATCH.



@@ -3515,26 +3516,26 @@
          pcre2_match_context *mcontext,
          int *workspace, PCRE2_SIZE wscount);


-       The  function  pcre2_dfa_match()  is  called  to match a subject string
-       against a compiled pattern, using a matching algorithm that  scans  the
+       The function pcre2_dfa_match() is called  to  match  a  subject  string
+       against  a  compiled pattern, using a matching algorithm that scans the
        subject string just once (not counting lookaround assertions), and does
-       not backtrack.  This has different characteristics to the normal  algo-
-       rithm,  and  is not compatible with Perl. Some of the features of PCRE2
-       patterns are not supported.  Nevertheless, there are  times  when  this
-       kind  of  matching  can be useful. For a discussion of the two matching
+       not  backtrack.  This has different characteristics to the normal algo-
+       rithm, and is not compatible with Perl. Some of the features  of  PCRE2
+       patterns  are  not  supported.  Nevertheless, there are times when this
+       kind of matching can be useful. For a discussion of  the  two  matching
        algorithms, and a list of features that pcre2_dfa_match() does not sup-
        port, see the pcre2matching documentation.


-       The  arguments  for  the pcre2_dfa_match() function are the same as for
+       The arguments for the pcre2_dfa_match() function are the  same  as  for
        pcre2_match(), plus two extras. The ovector within the match data block
        is used in a different way, and this is described below. The other com-
-       mon arguments are used in the same way as for pcre2_match(),  so  their
+       mon  arguments  are used in the same way as for pcre2_match(), so their
        description is not repeated here.


-       The  two  additional  arguments provide workspace for the function. The
-       workspace vector should contain at least 20 elements. It  is  used  for
+       The two additional arguments provide workspace for  the  function.  The
+       workspace  vector  should  contain at least 20 elements. It is used for
        keeping  track  of  multiple  paths  through  the  pattern  tree.  More
-       workspace is needed for patterns and subjects where there are a lot  of
+       workspace  is needed for patterns and subjects where there are a lot of
        potential matches.


        Here is an example of a simple call to pcre2_dfa_match():
@@ -3554,46 +3555,46 @@


    Option bits for pcre_dfa_match()


-       The  unused  bits of the options argument for pcre2_dfa_match() must be
-       zero.  The  only   bits   that   may   be   set   are   PCRE2_ANCHORED,
-       PCRE2_COPY_MATCHED_SUBJECT,       PCRE2_ENDANCHORED,      PCRE2_NOTBOL,
+       The unused bits of the options argument for pcre2_dfa_match()  must  be
+       zero.   The   only   bits   that   may   be   set  are  PCRE2_ANCHORED,
+       PCRE2_COPY_MATCHED_SUBJECT,      PCRE2_ENDANCHORED,       PCRE2_NOTBOL,
        PCRE2_NOTEOL,          PCRE2_NOTEMPTY,          PCRE2_NOTEMPTY_ATSTART,
        PCRE2_NO_UTF_CHECK,       PCRE2_PARTIAL_HARD,       PCRE2_PARTIAL_SOFT,
-       PCRE2_DFA_SHORTEST, and PCRE2_DFA_RESTART. All but  the  last  four  of
-       these  are  exactly the same as for pcre2_match(), so their description
+       PCRE2_DFA_SHORTEST,  and  PCRE2_DFA_RESTART.  All  but the last four of
+       these are exactly the same as for pcre2_match(), so  their  description
        is not repeated here.


          PCRE2_PARTIAL_HARD
          PCRE2_PARTIAL_SOFT


-       These have the same general effect as they do  for  pcre2_match(),  but
-       the  details are slightly different. When PCRE2_PARTIAL_HARD is set for
-       pcre2_dfa_match(), it returns PCRE2_ERROR_PARTIAL if  the  end  of  the
+       These  have  the  same general effect as they do for pcre2_match(), but
+       the details are slightly different. When PCRE2_PARTIAL_HARD is set  for
+       pcre2_dfa_match(),  it  returns  PCRE2_ERROR_PARTIAL  if the end of the
        subject is reached and there is still at least one matching possibility
        that requires additional characters. This happens even if some complete
-       matches  have  already  been found. When PCRE2_PARTIAL_SOFT is set, the
-       return code PCRE2_ERROR_NOMATCH is converted  into  PCRE2_ERROR_PARTIAL
-       if  the  end  of  the  subject  is reached, there have been no complete
+       matches have already been found. When PCRE2_PARTIAL_SOFT  is  set,  the
+       return  code  PCRE2_ERROR_NOMATCH is converted into PCRE2_ERROR_PARTIAL
+       if the end of the subject is  reached,  there  have  been  no  complete
        matches, but there is still at least one matching possibility. The por-
-       tion  of  the  string that was inspected when the longest partial match
+       tion of the string that was inspected when the  longest  partial  match
        was found is set as the first matching string in both cases. There is a
-       more  detailed  discussion  of partial and multi-segment matching, with
+       more detailed discussion of partial and  multi-segment  matching,  with
        examples, in the pcre2partial documentation.


          PCRE2_DFA_SHORTEST


-       Setting the PCRE2_DFA_SHORTEST option causes the matching algorithm  to
+       Setting  the PCRE2_DFA_SHORTEST option causes the matching algorithm to
        stop as soon as it has found one match. Because of the way the alterna-
-       tive algorithm works, this is necessarily the shortest  possible  match
+       tive  algorithm  works, this is necessarily the shortest possible match
        at the first possible matching point in the subject string.


          PCRE2_DFA_RESTART


-       When  pcre2_dfa_match() returns a partial match, it is possible to call
+       When pcre2_dfa_match() returns a partial match, it is possible to  call
        it again, with additional subject characters, and have it continue with
        the same match. The PCRE2_DFA_RESTART option requests this action; when
-       it is set, the workspace and wscount options must  reference  the  same
-       vector  as  before  because data about the match so far is left in them
+       it  is  set,  the workspace and wscount options must reference the same
+       vector as before because data about the match so far is  left  in  them
        after a partial match. There is more discussion of this facility in the
        pcre2partial documentation.


@@ -3601,8 +3602,8 @@

        When pcre2_dfa_match() succeeds, it may have matched more than one sub-
        string in the subject. Note, however, that all the matches from one run
-       of  the  function  start  at the same point in the subject. The shorter
-       matches are all initial substrings of the longer matches. For  example,
+       of the function start at the same point in  the  subject.  The  shorter
+       matches  are all initial substrings of the longer matches. For example,
        if the pattern


          <.*>
@@ -3617,80 +3618,80 @@
          <something> <something else>
          <something>


-       On  success,  the  yield of the function is a number greater than zero,
-       which is the number of matched substrings.  The  offsets  of  the  sub-
-       strings  are returned in the ovector, and can be extracted by number in
-       the same way as for pcre2_match(), but the numbers bear no relation  to
-       any  capture groups that may exist in the pattern, because DFA matching
+       On success, the yield of the function is a number  greater  than  zero,
+       which  is  the  number  of  matched substrings. The offsets of the sub-
+       strings are returned in the ovector, and can be extracted by number  in
+       the  same way as for pcre2_match(), but the numbers bear no relation to
+       any capture groups that may exist in the pattern, because DFA  matching
        does not support capturing.


-       Calls to the convenience functions  that  extract  substrings  by  name
-       return  the  error PCRE2_ERROR_DFA_UFUNC (unsupported function) if used
+       Calls  to  the  convenience  functions  that extract substrings by name
+       return the error PCRE2_ERROR_DFA_UFUNC (unsupported function)  if  used
        after a DFA match. The convenience functions that extract substrings by
        number never return PCRE2_ERROR_NOSUBSTRING.


-       The  matched  strings  are  stored  in  the ovector in reverse order of
-       length; that is, the longest matching string is first.  If  there  were
-       too  many matches to fit into the ovector, the yield of the function is
+       The matched strings are stored in  the  ovector  in  reverse  order  of
+       length;  that  is,  the longest matching string is first. If there were
+       too many matches to fit into the ovector, the yield of the function  is
        zero, and the vector is filled with the longest matches.


-       NOTE: PCRE2's "auto-possessification" optimization usually  applies  to
-       character  repeats at the end of a pattern (as well as internally). For
-       example, the pattern "a\d+" is compiled as if it were "a\d++". For  DFA
-       matching,  this  means  that  only  one possible match is found. If you
-       really do want multiple matches in such cases, either use  an  ungreedy
-       repeat  such  as  "a\d+?"  or set the PCRE2_NO_AUTO_POSSESS option when
+       NOTE:  PCRE2's  "auto-possessification" optimization usually applies to
+       character repeats at the end of a pattern (as well as internally).  For
+       example,  the pattern "a\d+" is compiled as if it were "a\d++". For DFA
+       matching, this means that only one possible  match  is  found.  If  you
+       really  do  want multiple matches in such cases, either use an ungreedy
+       repeat such as "a\d+?" or set  the  PCRE2_NO_AUTO_POSSESS  option  when
        compiling.


    Error returns from pcre2_dfa_match()


        The pcre2_dfa_match() function returns a negative number when it fails.
-       Many  of  the  errors  are  the same as for pcre2_match(), as described
+       Many of the errors are the same  as  for  pcre2_match(),  as  described
        above.  There are in addition the following errors that are specific to
        pcre2_dfa_match():


          PCRE2_ERROR_DFA_UITEM


-       This  return  is  given  if pcre2_dfa_match() encounters an item in the
-       pattern that it does not support, for instance, the use of \C in a  UTF
+       This return is given if pcre2_dfa_match() encounters  an  item  in  the
+       pattern  that it does not support, for instance, the use of \C in a UTF
        mode or a backreference.


          PCRE2_ERROR_DFA_UCOND


-       This  return  is given if pcre2_dfa_match() encounters a condition item
+       This return is given if pcre2_dfa_match() encounters a  condition  item
        that uses a backreference for the condition, or a test for recursion in
        a specific capture group. These are not supported.


          PCRE2_ERROR_DFA_UINVALID_UTF


-       This  return is given if pcre2_dfa_match() is called for a pattern that
-       was compiled with PCRE2_MATCH_INVALID_UTF. This is  not  supported  for
+       This return is given if pcre2_dfa_match() is called for a pattern  that
+       was  compiled  with  PCRE2_MATCH_INVALID_UTF. This is not supported for
        DFA matching.


          PCRE2_ERROR_DFA_WSSIZE


-       This  return  is  given  if  pcre2_dfa_match() runs out of space in the
+       This return is given if pcre2_dfa_match() runs  out  of  space  in  the
        workspace vector.


          PCRE2_ERROR_DFA_RECURSE


        When a recursion or subroutine call is processed, the matching function
-       calls  itself  recursively,  using  private  memory for the ovector and
-       workspace.  This error is given if the internal ovector  is  not  large
-       enough.  This  should  be  extremely  rare, as a vector of size 1000 is
+       calls itself recursively, using private  memory  for  the  ovector  and
+       workspace.   This  error  is given if the internal ovector is not large
+       enough. This should be extremely rare, as a  vector  of  size  1000  is
        used.


          PCRE2_ERROR_DFA_BADRESTART


-       When pcre2_dfa_match() is called  with  the  PCRE2_DFA_RESTART  option,
-       some  plausibility  checks  are  made on the contents of the workspace,
-       which should contain data about the previous partial match. If  any  of
+       When  pcre2_dfa_match()  is  called  with the PCRE2_DFA_RESTART option,
+       some plausibility checks are made on the  contents  of  the  workspace,
+       which  should  contain data about the previous partial match. If any of
        these checks fail, this error is given.



SEE ALSO

-       pcre2build(3),    pcre2callout(3),    pcre2demo(3),   pcre2matching(3),
+       pcre2build(3),   pcre2callout(3),    pcre2demo(3),    pcre2matching(3),
        pcre2partial(3), pcre2posix(3), pcre2sample(3), pcre2unicode(3).



@@ -3703,7 +3704,7 @@

REVISION

-       Last updated: 30 May 2019
+       Last updated: 11 June 2019
        Copyright (c) 1997-2019 University of Cambridge.
 ------------------------------------------------------------------------------



Modified: code/trunk/doc/pcre2grep.1
===================================================================
--- code/trunk/doc/pcre2grep.1    2019-06-14 15:44:57 UTC (rev 1105)
+++ code/trunk/doc/pcre2grep.1    2019-06-15 15:51:07 UTC (rev 1106)
@@ -1,4 +1,4 @@
-.TH PCRE2GREP 1 "28 May 2019" "PCRE2 10.34"
+.TH PCRE2GREP 1 "15 June 2019" "PCRE2 10.34"
 .SH NAME
 pcre2grep - a grep with Perl-compatible regular expressions.
 .SH SYNOPSIS
@@ -596,20 +596,30 @@
 .TP
 \fB-o\fP\fInumber\fP, \fB--only-matching\fP=\fInumber\fP
 Show only the part of the line that matched the capturing parentheses of the
-given number. Up to 32 capturing parentheses are supported, and -o0 is
-equivalent to \fB-o\fP without a number. Because these options can be given
-without an argument (see above), if an argument is present, it must be given in
-the same shell item, for example, -o3 or --only-matching=2. The comments given
-for the non-argument case above also apply to this option. If the specified
-capturing parentheses do not exist in the pattern, or were not set in the
-match, nothing is output unless the file name or line number are being output.
+given number. Up to 50 capturing parentheses are supported by default. This
+limit can be changed via the \fB--om-capture\fP option. A pattern may contain
+any number of capturing parentheses, but only those whose number is within the
+limit can be accessed by \fB-o\fP. An error occurs if the number specified by
+\fB-o\fP is greater than the limit.
 .sp
+-o0 is the same as \fB-o\fP without a number. Because these options can be
+given without an argument (see above), if an argument is present, it must be
+given in the same shell item, for example, -o3 or --only-matching=2. The
+comments given for the non-argument case above also apply to this option. If
+the specified capturing parentheses do not exist in the pattern, or were not
+set in the match, nothing is output unless the file name or line number are
+being output.
+.sp
 If this option is given multiple times, multiple substrings are output for each
 match, in the order the options are given, and all on one line. For example,
 -o3 -o1 -o3 causes the substrings matched by capturing parentheses 3 and 1 and
 then 3 again to be output. By default, there is no separator (but see the next
-option).
+but one option).
 .TP
+\fB--om-capture\fP=\fInumber\fP
+Set the number of capturing parentheses that can be accessed by \fB-o\fP. The 
+default is 50.
+.TP
 \fB--om-separator\fP=\fItext\fP
 Specify a separating string for multiple occurrences of \fB-o\fP. The default
 is an empty string. Separating strings are never coloured.
@@ -894,6 +904,6 @@
 .rs
 .sp
 .nf
-Last updated: 28 May 2019
+Last updated: 15 June 2019
 Copyright (c) 1997-2019 University of Cambridge.
 .fi


Modified: code/trunk/doc/pcre2grep.txt
===================================================================
--- code/trunk/doc/pcre2grep.txt    2019-06-14 15:44:57 UTC (rev 1105)
+++ code/trunk/doc/pcre2grep.txt    2019-06-15 15:51:07 UTC (rev 1106)
@@ -662,24 +662,33 @@


        -onumber, --only-matching=number
                  Show only the part of the line  that  matched  the  capturing
-                 parentheses of the given number. Up to 32 capturing parenthe-
-                 ses are supported, and -o0 is equivalent to -o without a num-
-                 ber.  Because  these options can be given without an argument
-                 (see above), if an argument is present, it must be  given  in
-                 the  same  shell item, for example, -o3 or --only-matching=2.
-                 The comments given for the non-argument case above also apply
-                 to this option. If the specified capturing parentheses do not
-                 exist in the pattern, or were not set in the  match,  nothing
-                 is  output unless the file name or line number are being out-
-                 put.
+                 parentheses of the given number. Up to 50 capturing parenthe-
+                 ses are supported by default. This limit can be  changed  via
+                 the  --om-capture option. A pattern may contain any number of
+                 capturing parentheses, but only those whose number is  within
+                 the  limit can be accessed by -o. An error occurs if the num-
+                 ber specified by -o is greater than the limit.


-                 If this option is given multiple times,  multiple  substrings
-                 are  output  for  each  match,  in  the order the options are
-                 given, and all on one line. For example, -o3 -o1  -o3  causes
-                 the  substrings  matched by capturing parentheses 3 and 1 and
-                 then 3 again to be output. By default, there is no  separator
-                 (but see the next option).
+                 -o0 is the same as -o without a number. Because these options
+                 can  be given without an argument (see above), if an argument
+                 is present, it must be given in  the  same  shell  item,  for
+                 example, -o3 or --only-matching=2. The comments given for the
+                 non-argument case above also apply to  this  option.  If  the
+                 specified  capturing parentheses do not exist in the pattern,
+                 or were not set in the match, nothing is  output  unless  the
+                 file name or line number are being output.


+                 If  this  option is given multiple times, multiple substrings
+                 are output for each match,  in  the  order  the  options  are
+                 given,  and  all on one line. For example, -o3 -o1 -o3 causes
+                 the substrings matched by capturing parentheses 3 and  1  and
+                 then  3 again to be output. By default, there is no separator
+                 (but see the next but one option).
+
+       --om-capture=number
+                 Set the number of capturing parentheses that can be  accessed
+                 by -o. The default is 50.
+
        --om-separator=text
                  Specify  a  separating string for multiple occurrences of -o.
                  The default is an empty string. Separating strings are  never
@@ -955,5 +964,5 @@


REVISION

-       Last updated: 28 May 2019
+       Last updated: 15 June 2019
        Copyright (c) 1997-2019 University of Cambridge.


Modified: code/trunk/doc/pcre2test.txt
===================================================================
--- code/trunk/doc/pcre2test.txt    2019-06-14 15:44:57 UTC (rev 1105)
+++ code/trunk/doc/pcre2test.txt    2019-06-15 15:51:07 UTC (rev 1106)
@@ -670,7 +670,9 @@
        as "starting code units". "Last code unit" is  the  last  literal  code
        unit  that  must  be  present in any match. This is not necessarily the
        last character. These lines are omitted if no starting or  ending  code
-       units are recorded.
+       units   are   recorded.   The  subject  length  line  is  omitted  when
+       no_start_optimize is set because the minimum length is  not  calculated
+       when it can never be used.


        The  framesize modifier shows the size, in bytes, of the storage frames
        used by pcre2_match() for handling backtracking. The  size  depends  on
@@ -1891,5 +1893,5 @@


REVISION

-       Last updated: 23 May 2019
+       Last updated: 11 June 2019
        Copyright (c) 1997-2019 University of Cambridge.


Modified: code/trunk/src/pcre2grep.c
===================================================================
--- code/trunk/src/pcre2grep.c    2019-06-14 15:44:57 UTC (rev 1105)
+++ code/trunk/src/pcre2grep.c    2019-06-15 15:51:07 UTC (rev 1106)
@@ -128,7 +128,7 @@


typedef int BOOL;

-#define OFFSET_SIZE 33
+#define DEFAULT_CAPTURE_MAX 50

#if BUFSIZ > 8192
#define MAXPATLEN BUFSIZ
@@ -255,6 +255,8 @@
static pcre2_match_context *match_context;
static pcre2_match_data *match_data;
static PCRE2_SIZE *offsets;
+static uint32_t offset_size;
+static uint32_t capture_max = DEFAULT_CAPTURE_MAX;

static BOOL count_only = FALSE;
static BOOL do_colour = FALSE;
@@ -404,6 +406,7 @@
#define N_INCLUDE_FROM (-21)
#define N_OM_SEPARATOR (-22)
#define N_MAX_BUFSIZE (-23)
+#define N_OM_CAPTURE (-24)

 static option_item optionlist[] = {
   { OP_NODATA,     N_NULL,   NULL,              "",              "terminate options" },
@@ -450,6 +453,7 @@
   { OP_STRING,     'O',      &output_text,       "output=text",   "show only this text (possibly expanded)" },
   { OP_OP_NUMBERS, 'o',      &only_matching_data, "only-matching=n", "show only the part of the line that matched" },
   { OP_STRING,     N_OM_SEPARATOR, &om_separator, "om-separator=text", "set separator for multiple -o output" },
+  { OP_U32NUMBER,  N_OM_CAPTURE, &capture_max,  "om-capture=n",  "set capture count for --only-matching" },
   { OP_NODATA,     'q',      NULL,              "quiet",         "suppress output, just set return code" },
   { OP_NODATA,     'r',      NULL,              "recursive",     "recursively scan sub-directories" },
   { OP_PATLIST,    N_EXCLUDE,&exclude_patdata,  "exclude=pattern","exclude matching files when recursing" },
@@ -1753,7 +1757,7 @@
     unsigned char mbuffer[256];
     PCRE2_SIZE startchar = pcre2_get_startchar(match_data);
     (void)pcre2_get_error_message(*mrc, mbuffer, sizeof(mbuffer));
-    fprintf(stderr, "%s at offset %" SIZ_FORM "\n\n", mbuffer, 
+    fprintf(stderr, "%s at offset %" SIZ_FORM "\n\n", mbuffer,
       SIZ_CAST startchar);
     }
   if (*mrc == PCRE2_ERROR_MATCHLIMIT || *mrc == PCRE2_ERROR_DEPTHLIMIT ||
@@ -2591,7 +2595,7 @@


       for (i = 0; i < jfriedl_XR; i++)
           match = (pcre_exec(patterns->compiled, patterns->hint, ptr, length, 0,
-              PCRE2_NOTEMPTY, offsets, OFFSET_SIZE) >= 0);
+              PCRE2_NOTEMPTY, offsets, offset_size) >= 0);


       if (gettimeofday(&end_time, &dummy) != 0)
               perror("bad gettimeofday");
@@ -2711,7 +2715,7 @@
           for (om = only_matching; om != NULL; om = om->next)
             {
             int n = om->groupnum;
-            if (n < mrc)
+            if (n == 0 || n < mrc)
               {
               int plen = offsets[2*n + 1] - offsets[2*n];
               if (plen > 0)
@@ -3663,6 +3667,7 @@
 BOOL only_one_at_top;
 patstr *cp;
 fnstr *fn;
+omstr *om;
 const char *locale_from = "--locale";


#ifdef SUPPORT_PCRE2GREP_JIT
@@ -3679,20 +3684,6 @@
_setmode(_fileno(stdout), _O_BINARY);
#endif

-/* Set up a default compile and match contexts and a match data block. */
-
-compile_context = pcre2_compile_context_create(NULL);
-match_context = pcre2_match_context_create(NULL);
-match_data = pcre2_match_data_create(OFFSET_SIZE, NULL);
-offsets = pcre2_get_ovector_pointer(match_data);
-
-/* If string (script) callouts are supported, set up the callout processing
-function. */
-
-#ifdef SUPPORT_PCRE2GREP_CALLOUT
-pcre2_set_callout(match_context, pcre2grep_callout, NULL);
-#endif
-
/* Process the options */

for (i = 1; i < argc; i++)
@@ -4039,6 +4030,19 @@
pcre2grep_exit(usage(2));
}

+/* Check that there is a big enough ovector for all -o settings. */
+
+for (om = only_matching; om != NULL; om = om->next)
+  {
+  int n = om->groupnum;
+  if (n > (int)capture_max)
+    {
+    fprintf(stderr, "pcre2grep: Requested group %d cannot be captured.\n", n);
+    fprintf(stderr, "pcre2grep: Use --om-capture to increase the size of the capture vector.\n");
+    goto EXIT2;
+    }
+  }
+
 /* Check the text supplied to --output for errors. */


 if (output_text != NULL &&
@@ -4045,6 +4049,21 @@
     !syntax_check_output_text((PCRE2_SPTR)output_text, FALSE))
   goto EXIT2;


+/* Set up default compile and match contexts and a match data block. */
+
+offset_size = capture_max + 1;
+compile_context = pcre2_compile_context_create(NULL);
+match_context = pcre2_match_context_create(NULL);
+match_data = pcre2_match_data_create(offset_size, NULL);
+offsets = pcre2_get_ovector_pointer(match_data);
+
+/* If string (script) callouts are supported, set up the callout processing
+function. */
+
+#ifdef SUPPORT_PCRE2GREP_CALLOUT
+pcre2_set_callout(match_context, pcre2grep_callout, NULL);
+#endif
+
/* Put limits into the match data block. */

if (heap_limit != PCRE2_UNSET) pcre2_set_heap_limit(match_context, heap_limit);

Modified: code/trunk/testdata/grepoutput
===================================================================
(Binary files differ)