Revision: 1001
http://www.exim.org/viewvc/pcre2?view=rev&revision=1001
Author: ph10
Date: 2018-09-11 15:27:39 +0100 (Tue, 11 Sep 2018)
Log Message:
-----------
Final file tidies for 10.32
Modified Paths:
--------------
code/trunk/ChangeLog
code/trunk/LICENCE
code/trunk/NEWS
code/trunk/configure.ac
code/trunk/doc/html/pcre2api.html
code/trunk/doc/html/pcre2pattern.html
code/trunk/doc/html/pcre2syntax.html
code/trunk/doc/html/pcre2unicode.html
code/trunk/doc/pcre2.txt
code/trunk/doc/pcre2api.3
code/trunk/doc/pcre2pattern.3
code/trunk/doc/pcre2unicode.3
code/trunk/src/config.h.generic
code/trunk/src/pcre2.h.generic
Modified: code/trunk/ChangeLog
===================================================================
--- code/trunk/ChangeLog 2018-09-10 17:34:19 UTC (rev 1000)
+++ code/trunk/ChangeLog 2018-09-11 14:27:39 UTC (rev 1001)
@@ -155,37 +155,37 @@
an emulation function when there is no memmove(). The emulation makes use of
bcopy() when available.
-34. When serializing a pattern, set the memctl, executable_jit, and tables
-fields (that is, all the fields that contain pointers) to zeros so that the
-result of serializing is always the same. These fields are re-set when the
+34. When serializing a pattern, set the memctl, executable_jit, and tables
+fields (that is, all the fields that contain pointers) to zeros so that the
+result of serializing is always the same. These fields are re-set when the
pattern is deserialized.
35. In a pattern such as /[^\x{100}-\x{ffff}]*[\x80-\xff]/ which has a repeated
negative class with no characters less than 0x100 followed by a positive class
-with only characters less than 0x100, the first class was incorrectly being
+with only characters less than 0x100, the first class was incorrectly being
auto-possessified, causing incorrect match failures.
-36. Removed the character type bit ctype_meta, which dates from PCRE1 and is
+36. Removed the character type bit ctype_meta, which dates from PCRE1 and is
not used in PCRE2.
37. Tidied up unnecessarily complicated macros used in the escapes table.
-38. Since 10.21, the new testoutput8-16-4 file has accidentally been omitted
-from distribution tarballs, owing to a typo in Makefile.am which had
+38. Since 10.21, the new testoutput8-16-4 file has accidentally been omitted
+from distribution tarballs, owing to a typo in Makefile.am which had
testoutput8-16-3 twice. Now fixed.
-39. If the only branch in a conditional subpattern was anchored, the whole
-subpattern was treated as anchored, when it should not have been, since the
-assumed empty second branch cannot be anchored. Demonstrated by test patterns
+39. If the only branch in a conditional subpattern was anchored, the whole
+subpattern was treated as anchored, when it should not have been, since the
+assumed empty second branch cannot be anchored. Demonstrated by test patterns
such as /(?(1)^())b/ or /(?(?=^))b/.
-40. A repeated conditional subpattern that could match an empty string was
+40. A repeated conditional subpattern that could match an empty string was
always assumed to be unanchored. Now it it checked just like any other
-repeated conditional subpattern, and can be found to be anchored if the minimum
+repeated conditional subpattern, and can be found to be anchored if the minimum
quantifier is one or more. I can't see much use for a repeated anchored
pattern, but the behaviour is now consistent.
-41. Minor addition to pcre2_jit_compile.c to avoid static analyzer complaint
+41. Minor addition to pcre2_jit_compile.c to avoid static analyzer complaint
(for an event that could never occur but you had to have external information
to know that).
@@ -194,7 +194,7 @@
expanded, the variable holding the location of the end of the previous match
was being adjusted incorrectly, and could cause an overflow warning from a code
sanitizer. However, as the value is used only to print pending "after" lines
-when the next match is reached (and there are no such lines in this case) this
+when the next match is reached (and there are no such lines in this case) this
bug could do no damage.
Modified: code/trunk/LICENCE
===================================================================
--- code/trunk/LICENCE 2018-09-10 17:34:19 UTC (rev 1000)
+++ code/trunk/LICENCE 2018-09-11 14:27:39 UTC (rev 1001)
@@ -4,11 +4,11 @@
PCRE2 is a library of functions to support regular expressions whose syntax
and semantics are as close as possible to those of the Perl 5 language.
-Release 10 of PCRE2 is distributed under the terms of the "BSD" licence, as
-specified below, with one exemption for certain binary redistributions. The
-documentation for PCRE2, supplied in the "doc" directory, is distributed under
-the same terms as the software itself. The data in the testdata directory is
-not copyrighted and is in the public domain.
+Releases 10.00 and above of PCRE2 are distributed under the terms of the "BSD"
+licence, as specified below, with one exemption for certain binary
+redistributions. The documentation for PCRE2, supplied in the "doc" directory,
+is distributed under the same terms as the software itself. The data in the
+testdata directory is not copyrighted and is in the public domain.
The basic library functions are written in C and are freestanding. Also
included in the distribution is a just-in-time compiler that can be used to
Modified: code/trunk/NEWS
===================================================================
--- code/trunk/NEWS 2018-09-10 17:34:19 UTC (rev 1000)
+++ code/trunk/NEWS 2018-09-11 14:27:39 UTC (rev 1001)
@@ -1,11 +1,12 @@
News about PCRE2 releases
-------------------------
-Version 10.32 13-August-2018
-----------------------------
+Version 10.32 10-September-2018
+-------------------------------
+
This is another mainly bugfix and tidying release with a few minor
-enhancements.
+enhancements. These are the main ones:
1. pcre2grep now supports the inclusion of binary zeros in patterns that are
read from files via the -f option.
@@ -22,7 +23,7 @@
5. (*ACCEPT:ARG), (*FAIL:ARG), and (*COMMIT:ARG) are now supported.
-6. Added support for \N{U+dddd}, but not in EBCDIC environments.
+6. Added support for \N{U+dddd}, but only in Unicode mode.
7. Added support for (?^) to unset all imnsx options.
Modified: code/trunk/configure.ac
===================================================================
--- code/trunk/configure.ac 2018-09-10 17:34:19 UTC (rev 1000)
+++ code/trunk/configure.ac 2018-09-11 14:27:39 UTC (rev 1001)
@@ -10,8 +10,8 @@
m4_define(pcre2_major, [10])
m4_define(pcre2_minor, [32])
-m4_define(pcre2_prerelease, [-RC1])
-m4_define(pcre2_date, [2018-08-13])
+m4_define(pcre2_prerelease, [])
+m4_define(pcre2_date, [2018-09-10])
# NOTE: The CMakeLists.txt file searches for the above variables in the first
# 50 lines of this file. Please update that if the variables above are moved.
@@ -839,7 +839,7 @@
# When we run 'make distcheck', use these arguments. Turning off compiler
# optimization makes it run faster.
-DISTCHECK_CONFIGURE_FLAGS="CFLAGS='' CXXFLAGS='' --enable-pcre2-16 --enable-pcre2-32 --enable-jit --enable-utf"
+DISTCHECK_CONFIGURE_FLAGS="CFLAGS='' CXXFLAGS='' --enable-pcre2-16 --enable-pcre2-32 --enable-jit"
AC_SUBST(DISTCHECK_CONFIGURE_FLAGS)
# Check that, if --enable-pcre2grep-libz or --enable-pcre2grep-libbz2 is
Modified: code/trunk/doc/html/pcre2api.html
===================================================================
--- code/trunk/doc/html/pcre2api.html 2018-09-10 17:34:19 UTC (rev 1000)
+++ code/trunk/doc/html/pcre2api.html 2018-09-11 14:27:39 UTC (rev 1001)
@@ -1804,7 +1804,8 @@
the use of this option provokes an error. Details of how PCRE2_UTF changes the
behaviour of PCRE2 are given in the
<a href="pcre2unicode.html"><b>pcre2unicode</b></a>
-page.
+page. In particular, note that it changes the way PCRE2_CASELESS handles
+characters with code points greater than 127.
<a name="extracompileoptions"></a></P>
<br><b>
Extra compile options
@@ -2776,7 +2777,7 @@
pattern are never changed. That is, if a pattern contains <i>n</i> capturing
parentheses, no more than <i>ovector[0]</i> to <i>ovector[2n+1]</i> are set by
<b>pcre2_match()</b>. The other elements retain whatever values they previously
-had.
+had. After a failed match attempt, the contents of the ovector are unchanged.
<a name="matchotherdata"></a></P>
<br><a name="SEC30" href="#TOC1">OTHER INFORMATION ABOUT A MATCH</a><br>
<P>
@@ -3192,6 +3193,12 @@
allocate memory for the compiled code.
</P>
<P>
+If an external <i>match_data</i> block is provided, its contents afterwards
+are those set by the final call to <b>pcre2_match()</b>, which will have
+ended in a matching error. The contents of the ovector within the match data
+block may or may not have been changed.
+</P>
+<P>
The <i>outlengthptr</i> argument must point to a variable that contains the
length, in code units, of the output buffer. If the function is successful, the
value is updated to contain the length of the new string, excluding the
@@ -3658,7 +3665,7 @@
</P>
<br><a name="SEC42" href="#TOC1">REVISION</a><br>
<P>
-Last updated: 03 August 2018
+Last updated: 07 September 2018
<br>
Copyright © 1997-2018 University of Cambridge.
<br>
Modified: code/trunk/doc/html/pcre2pattern.html
===================================================================
--- code/trunk/doc/html/pcre2pattern.html 2018-09-10 17:34:19 UTC (rev 1000)
+++ code/trunk/doc/html/pcre2pattern.html 2018-09-11 14:27:39 UTC (rev 1001)
@@ -399,14 +399,15 @@
\ddd character with octal code ddd, or backreference
\o{ddd..} character with octal code ddd..
\xhh character with hex code hh
- \x{hhh..} character with hex code hhh.. (default mode)
- \N{U+hhh..} character with Unicode code point hhh..
+ \x{hhh..} character with hex code hhh..
+ \N{U+hhh..} character with Unicode hex code point hhh..
\uhhhh character with hex code hhhh (when PCRE2_ALT_BSUX is set)
</pre>
+The \N{U+hhh..} escape sequence is recognized only when the PCRE2_UTF option
+is set, that is, when PCRE2 is operating in a Unicode mode. Perl also uses
+\N{name} to specify characters by Unicode name; PCRE2 does not support this.
Note that when \N is not followed by an opening brace (curly bracket) it has
an entirely different meaning, matching any character that is not a newline.
-Perl also uses \N{name} to specify characters by Unicode name; PCRE2 does not
-support this.
</P>
<P>
The precise effect of \cx on ASCII characters is as follows: if x is a lower
@@ -530,7 +531,8 @@
Invalid Unicode code points are all those in the range 0xd800 to 0xdfff (the
so-called "surrogate" code points). The check for these can be disabled by the
caller of <b>pcre2_compile()</b> by setting the option
-PCRE2_EXTRA_ALLOW_SURROGATE_ESCAPES.
+PCRE2_EXTRA_ALLOW_SURROGATE_ESCAPES. However, this is possible only in UTF-8
+and UTF-32 modes, because these values are not representable in UTF-16.
</P>
<br><b>
Escape sequences in character classes
@@ -3595,13 +3597,16 @@
an immediate backtrack.
</P>
<P>
-(*COMMIT), (*SKIP), and (*PRUNE) in a subpattern called as a subroutine cause
-the subroutine match to fail.
+(*COMMIT), (*SKIP), and (*PRUNE) cause the subroutine match to fail when
+triggered by being backtracked to in a subpattern called as a subroutine. There
+is then a backtrack at the outer level.
</P>
<P>
-(*THEN) skips to the next alternative in the innermost enclosing group within
-the subpattern that has alternatives. If there is no such group within the
-subpattern, (*THEN) causes the subroutine match to fail.
+(*THEN), when triggered, skips to the next alternative in the innermost
+enclosing group within the subpattern that has alternatives (its normal
+behaviour). However, if there is no such group within the subroutine
+subpattern, the subroutine match fails and there is a backtrack at the outer
+level.
</P>
<br><a name="SEC28" href="#TOC1">SEE ALSO</a><br>
<P>
@@ -3619,7 +3624,7 @@
</P>
<br><a name="SEC30" href="#TOC1">REVISION</a><br>
<P>
-Last updated: 03 August 2018
+Last updated: 04 September 2018
<br>
Copyright © 1997-2018 University of Cambridge.
<br>
Modified: code/trunk/doc/html/pcre2syntax.html
===================================================================
--- code/trunk/doc/html/pcre2syntax.html 2018-09-10 17:34:19 UTC (rev 1000)
+++ code/trunk/doc/html/pcre2syntax.html 2018-09-11 14:27:39 UTC (rev 1001)
@@ -70,7 +70,7 @@
\ddd character with octal code ddd, or backreference
\o{ddd..} character with octal code ddd..
\U "U" if PCRE2_ALT_BSUX is set (otherwise is an error)
- \N{U+hh..} character with Unicode code point hh..
+ \N{U+hh..} character with Unicode code point hh.. (Unicode mode only)
\uhhhh character with hex code hhhh (if PCRE2_ALT_BSUX is set)
\xhh character with hex code hh
\x{hh..} character with hex code hh..
@@ -634,7 +634,7 @@
</P>
<br><a name="SEC27" href="#TOC1">REVISION</a><br>
<P>
-Last updated: 01 August 2018
+Last updated: 02 September 2018
<br>
Copyright © 1997-2018 University of Cambridge.
<br>
Modified: code/trunk/doc/html/pcre2unicode.html
===================================================================
--- code/trunk/doc/html/pcre2unicode.html 2018-09-10 17:34:19 UTC (rev 1000)
+++ code/trunk/doc/html/pcre2unicode.html 2018-09-11 14:27:39 UTC (rev 1001)
@@ -26,7 +26,8 @@
with the PCRE2_UTF option flag, or the pattern must start with the sequence
(*UTF). When either of these is the case, both the pattern and any subject
strings that are matched against it are treated as UTF strings instead of
-strings of individual one-code-unit characters.
+strings of individual one-code-unit characters. There are also some other
+changes to the way characters are handled, as documented below.
</P>
<P>
If you do not need Unicode support you can build PCRE2 without it, in which
@@ -59,6 +60,11 @@
also recognized; larger ones can be coded using \o{...}.
</P>
<P>
+The escape sequence \N{U+<hex digits>} is recognized as another way of
+specifying a Unicode character by code point in a UTF mode. It is not allowed
+in non-UTF modes.
+</P>
+<P>
In UTF modes, repeat quantifiers apply to complete UTF characters, not to
individual code units.
</P>
@@ -294,9 +300,9 @@
REVISION
</b><br>
<P>
-Last updated: 17 May 2017
+Last updated: 02 September 2018
<br>
-Copyright © 1997-2017 University of Cambridge.
+Copyright © 1997-2018 University of Cambridge.
<br>
<p>
Return to the <a href="index.html">PCRE2 index page</a>.
Modified: code/trunk/doc/pcre2.txt
===================================================================
--- code/trunk/doc/pcre2.txt 2018-09-10 17:34:19 UTC (rev 1000)
+++ code/trunk/doc/pcre2.txt 2018-09-11 14:27:39 UTC (rev 1001)
@@ -1784,74 +1784,75 @@
built to include Unicode support (which is the default). If Unicode
support is not available, the use of this option provokes an error.
Details of how PCRE2_UTF changes the behaviour of PCRE2 are given in
- the pcre2unicode page.
+ the pcre2unicode page. In particular, note that it changes the way
+ PCRE2_CASELESS handles characters with code points greater than 127.
Extra compile options
- Unlike the main compile-time options, the extra options are not saved
+ Unlike the main compile-time options, the extra options are not saved
with the compiled pattern. The option bits that can be set in a compile
- context by calling the pcre2_set_compile_extra_options() function are
+ context by calling the pcre2_set_compile_extra_options() function are
as follows:
PCRE2_EXTRA_ALLOW_SURROGATE_ESCAPES
- This option applies when compiling a pattern in UTF-8 or UTF-32 mode.
- It is forbidden in UTF-16 mode, and ignored in non-UTF modes. Unicode
+ This option applies when compiling a pattern in UTF-8 or UTF-32 mode.
+ It is forbidden in UTF-16 mode, and ignored in non-UTF modes. Unicode
"surrogate" code points in the range 0xd800 to 0xdfff are used in pairs
- in UTF-16 to encode code points with values in the range 0x10000 to
- 0x10ffff. The surrogates cannot therefore be represented in UTF-16.
+ in UTF-16 to encode code points with values in the range 0x10000 to
+ 0x10ffff. The surrogates cannot therefore be represented in UTF-16.
They can be represented in UTF-8 and UTF-32, but are defined as invalid
- code points, and cause errors if encountered in a UTF-8 or UTF-32
+ code points, and cause errors if encountered in a UTF-8 or UTF-32
string that is being checked for validity by PCRE2.
- These values also cause errors if encountered in escape sequences such
+ These values also cause errors if encountered in escape sequences such
as \x{d912} within a pattern. However, it seems that some applications,
- when using PCRE2 to check for unwanted characters in UTF-8 strings,
- explicitly test for the surrogates using escape sequences. The
- PCRE2_NO_UTF_CHECK option does not disable the error that occurs,
- because it applies only to the testing of input strings for UTF valid-
+ when using PCRE2 to check for unwanted characters in UTF-8 strings,
+ explicitly test for the surrogates using escape sequences. The
+ PCRE2_NO_UTF_CHECK option does not disable the error that occurs,
+ because it applies only to the testing of input strings for UTF valid-
ity.
- If the extra option PCRE2_EXTRA_ALLOW_SURROGATE_ESCAPES is set, surro-
- gate code point values in UTF-8 and UTF-32 patterns no longer provoke
- errors and are incorporated in the compiled pattern. However, they can
- only match subject characters if the matching function is called with
+ If the extra option PCRE2_EXTRA_ALLOW_SURROGATE_ESCAPES is set, surro-
+ gate code point values in UTF-8 and UTF-32 patterns no longer provoke
+ errors and are incorporated in the compiled pattern. However, they can
+ only match subject characters if the matching function is called with
PCRE2_NO_UTF_CHECK set.
PCRE2_EXTRA_BAD_ESCAPE_IS_LITERAL
- This is a dangerous option. Use with care. By default, an unrecognized
- escape such as \j or a malformed one such as \x{2z} causes a compile-
+ This is a dangerous option. Use with care. By default, an unrecognized
+ escape such as \j or a malformed one such as \x{2z} causes a compile-
time error when detected by pcre2_compile(). Perl is somewhat inconsis-
- tent in handling such items: for example, \j is treated as a literal
- "j", and non-hexadecimal digits in \x{} are just ignored, though warn-
- ings are given in both cases if Perl's warning switch is enabled. How-
- ever, a malformed octal number after \o{ always causes an error in
+ tent in handling such items: for example, \j is treated as a literal
+ "j", and non-hexadecimal digits in \x{} are just ignored, though warn-
+ ings are given in both cases if Perl's warning switch is enabled. How-
+ ever, a malformed octal number after \o{ always causes an error in
Perl.
- If the PCRE2_EXTRA_BAD_ESCAPE_IS_LITERAL extra option is passed to
- pcre2_compile(), all unrecognized or erroneous escape sequences are
- treated as single-character escapes. For example, \j is a literal "j"
- and \x{2z} is treated as the literal string "x{2z}". Setting this
- option means that typos in patterns may go undetected and have unex-
+ If the PCRE2_EXTRA_BAD_ESCAPE_IS_LITERAL extra option is passed to
+ pcre2_compile(), all unrecognized or erroneous escape sequences are
+ treated as single-character escapes. For example, \j is a literal "j"
+ and \x{2z} is treated as the literal string "x{2z}". Setting this
+ option means that typos in patterns may go undetected and have unex-
pected results. This is a dangerous option. Use with care.
PCRE2_EXTRA_MATCH_LINE
- This option is provided for use by the -x option of pcre2grep. It
- causes the pattern only to match complete lines. This is achieved by
- automatically inserting the code for "^(?:" at the start of the com-
- piled pattern and ")$" at the end. Thus, when PCRE2_MULTILINE is set,
- the matched line may be in the middle of the subject string. This
+ This option is provided for use by the -x option of pcre2grep. It
+ causes the pattern only to match complete lines. This is achieved by
+ automatically inserting the code for "^(?:" at the start of the com-
+ piled pattern and ")$" at the end. Thus, when PCRE2_MULTILINE is set,
+ the matched line may be in the middle of the subject string. This
option can be used with PCRE2_LITERAL.
PCRE2_EXTRA_MATCH_WORD
- This option is provided for use by the -w option of pcre2grep. It
- causes the pattern only to match strings that have a word boundary at
- the start and the end. This is achieved by automatically inserting the
- code for "\b(?:" at the start of the compiled pattern and ")\b" at the
- end. The option may be used with PCRE2_LITERAL. However, it is ignored
+ This option is provided for use by the -w option of pcre2grep. It
+ causes the pattern only to match strings that have a word boundary at
+ the start and the end. This is achieved by automatically inserting the
+ code for "\b(?:" at the start of the compiled pattern and ")\b" at the
+ end. The option may be used with PCRE2_LITERAL. However, it is ignored
if PCRE2_EXTRA_MATCH_LINE is also set.
@@ -1874,53 +1875,53 @@
void pcre2_jit_stack_free(pcre2_jit_stack *jit_stack);
- These functions provide support for JIT compilation, which, if the
- just-in-time compiler is available, further processes a compiled pat-
+ These functions provide support for JIT compilation, which, if the
+ just-in-time compiler is available, further processes a compiled pat-
tern into machine code that executes much faster than the pcre2_match()
- interpretive matching function. Full details are given in the pcre2jit
+ interpretive matching function. Full details are given in the pcre2jit
documentation.
- JIT compilation is a heavyweight optimization. It can take some time
- for patterns to be analyzed, and for one-off matches and simple pat-
- terns the benefit of faster execution might be offset by a much slower
- compilation time. Most (but not all) patterns can be optimized by the
+ JIT compilation is a heavyweight optimization. It can take some time
+ for patterns to be analyzed, and for one-off matches and simple pat-
+ terns the benefit of faster execution might be offset by a much slower
+ compilation time. Most (but not all) patterns can be optimized by the
JIT compiler.
LOCALE SUPPORT
- PCRE2 handles caseless matching, and determines whether characters are
- letters, digits, or whatever, by reference to a set of tables, indexed
- by character code point. This applies only to characters whose code
- points are less than 256. By default, higher-valued code points never
- match escapes such as \w or \d. However, if PCRE2 is built with Uni-
+ PCRE2 handles caseless matching, and determines whether characters are
+ letters, digits, or whatever, by reference to a set of tables, indexed
+ by character code point. This applies only to characters whose code
+ points are less than 256. By default, higher-valued code points never
+ match escapes such as \w or \d. However, if PCRE2 is built with Uni-
code support, all characters can be tested with \p and \P, or, alterna-
- tively, the PCRE2_UCP option can be set when a pattern is compiled;
- this causes \w and friends to use Unicode property support instead of
+ tively, the PCRE2_UCP option can be set when a pattern is compiled;
+ this causes \w and friends to use Unicode property support instead of
the built-in tables.
- The use of locales with Unicode is discouraged. If you are handling
- characters with code points greater than 128, you should either use
+ The use of locales with Unicode is discouraged. If you are handling
+ characters with code points greater than 128, you should either use
Unicode support, or use locales, but not try to mix the two.
- PCRE2 contains an internal set of character tables that are used by
- default. These are sufficient for many applications. Normally, the
+ PCRE2 contains an internal set of character tables that are used by
+ default. These are sufficient for many applications. Normally, the
internal tables recognize only ASCII characters. However, when PCRE2 is
built, it is possible to cause the internal tables to be rebuilt in the
default "C" locale of the local system, which may cause them to be dif-
ferent.
- The internal tables can be overridden by tables supplied by the appli-
- cation that calls PCRE2. These may be created in a different locale
- from the default. As more and more applications change to using Uni-
+ The internal tables can be overridden by tables supplied by the appli-
+ cation that calls PCRE2. These may be created in a different locale
+ from the default. As more and more applications change to using Uni-
code, the need for this locale support is expected to die away.
- External tables are built by calling the pcre2_maketables() function,
- in the relevant locale. The result can be passed to pcre2_compile() as
- often as necessary, by creating a compile context and calling
- pcre2_set_character_tables() to set the tables pointer therein. For
- example, to build and use tables that are appropriate for the French
- locale (where accented characters with values greater than 128 are
+ External tables are built by calling the pcre2_maketables() function,
+ in the relevant locale. The result can be passed to pcre2_compile() as
+ often as necessary, by creating a compile context and calling
+ pcre2_set_character_tables() to set the tables pointer therein. For
+ example, to build and use tables that are appropriate for the French
+ locale (where accented characters with values greater than 128 are
treated as letters), the following code could be used:
setlocale(LC_CTYPE, "fr_FR");
@@ -1929,15 +1930,15 @@
pcre2_set_character_tables(ccontext, tables);
re = pcre2_compile(..., ccontext);
- The locale name "fr_FR" is used on Linux and other Unix-like systems;
- if you are using Windows, the name for the French locale is "french".
- It is the caller's responsibility to ensure that the memory containing
+ The locale name "fr_FR" is used on Linux and other Unix-like systems;
+ if you are using Windows, the name for the French locale is "french".
+ It is the caller's responsibility to ensure that the memory containing
the tables remains available for as long as it is needed.
The pointer that is passed (via the compile context) to pcre2_compile()
- is saved with the compiled pattern, and the same tables are used by
- pcre2_match() and pcre_dfa_match(). Thus, for any single pattern, com-
- pilation and matching both happen in the same locale, but different
+ is saved with the compiled pattern, and the same tables are used by
+ pcre2_match() and pcre_dfa_match(). Thus, for any single pattern, com-
+ pilation and matching both happen in the same locale, but different
patterns can be processed in different locales.
@@ -1945,13 +1946,13 @@
int pcre2_pattern_info(const pcre2 *code, uint32_t what, void *where);
- The pcre2_pattern_info() function returns general information about a
+ The pcre2_pattern_info() function returns general information about a
compiled pattern. For information about callouts, see the next section.
- The first argument for pcre2_pattern_info() is a pointer to the com-
+ The first argument for pcre2_pattern_info() is a pointer to the com-
piled pattern. The second argument specifies which piece of information
- is required, and the third argument is a pointer to a variable to
- receive the data. If the third argument is NULL, the first argument is
- ignored, and the function returns the size in bytes of the variable
+ is required, and the third argument is a pointer to a variable to
+ receive the data. If the third argument is NULL, the first argument is
+ ignored, and the function returns the size in bytes of the variable
that is required for the information requested. Otherwise, the yield of
the function is zero for success, or one of the following negative num-
bers:
@@ -1961,9 +1962,9 @@
PCRE2_ERROR_BADOPTION the value of what was invalid
PCRE2_ERROR_UNSET the requested field is not set
- The "magic number" is placed at the start of each compiled pattern as
- an simple check against passing an arbitrary memory pointer. Here is a
- typical call of pcre2_pattern_info(), to obtain the length of the com-
+ The "magic number" is placed at the start of each compiled pattern as
+ an simple check against passing an arbitrary memory pointer. Here is a
+ typical call of pcre2_pattern_info(), to obtain the length of the com-
piled pattern:
int rc;
@@ -1981,22 +1982,22 @@
PCRE2_INFO_EXTRAOPTIONS
Return copies of the pattern's options. The third argument should point
- to a uint32_t variable. PCRE2_INFO_ARGOPTIONS returns exactly the
- options that were passed to pcre2_compile(), whereas PCRE2_INFO_ALLOP-
- TIONS returns the compile options as modified by any top-level (*XXX)
- option settings such as (*UTF) at the start of the pattern itself.
- PCRE2_INFO_EXTRAOPTIONS returns the extra options that were set in the
- compile context by calling the pcre2_set_compile_extra_options() func-
+ to a uint32_t variable. PCRE2_INFO_ARGOPTIONS returns exactly the
+ options that were passed to pcre2_compile(), whereas PCRE2_INFO_ALLOP-
+ TIONS returns the compile options as modified by any top-level (*XXX)
+ option settings such as (*UTF) at the start of the pattern itself.
+ PCRE2_INFO_EXTRAOPTIONS returns the extra options that were set in the
+ compile context by calling the pcre2_set_compile_extra_options() func-
tion.
- For example, if the pattern /(*UTF)abc/ is compiled with the
- PCRE2_EXTENDED option, the result for PCRE2_INFO_ALLOPTIONS is
- PCRE2_EXTENDED and PCRE2_UTF. Option settings such as (?i) that can
- change within a pattern do not affect the result of PCRE2_INFO_ALLOP-
+ For example, if the pattern /(*UTF)abc/ is compiled with the
+ PCRE2_EXTENDED option, the result for PCRE2_INFO_ALLOPTIONS is
+ PCRE2_EXTENDED and PCRE2_UTF. Option settings such as (?i) that can
+ change within a pattern do not affect the result of PCRE2_INFO_ALLOP-
TIONS, even if they appear right at the start of the pattern. (This was
different in some earlier releases.)
- A pattern compiled without PCRE2_ANCHORED is automatically anchored by
+ A pattern compiled without PCRE2_ANCHORED is automatically anchored by
PCRE2 if the first significant item in every top-level branch is one of
the following:
@@ -2005,7 +2006,7 @@
\G always
.* sometimes - see below
- When .* is the first significant item, anchoring is possible only when
+ When .* is the first significant item, anchoring is possible only when
all the following are true:
.* is not in an atomic group
@@ -2015,71 +2016,71 @@
Neither (*PRUNE) nor (*SKIP) appears in the pattern
PCRE2_NO_DOTSTAR_ANCHOR is not set
- For patterns that are auto-anchored, the PCRE2_ANCHORED bit is set in
+ For patterns that are auto-anchored, the PCRE2_ANCHORED bit is set in
the options returned for PCRE2_INFO_ALLOPTIONS.
PCRE2_INFO_BACKREFMAX
- Return the number of the highest backreference in the pattern. The
- third argument should point to an uint32_t variable. Named subpatterns
- acquire numbers as well as names, and these count towards the highest
- backreference. Backreferences such as \4 or \g{12} match the captured
- characters of the given group, but in addition, the check that a cap-
- turing group is set in a conditional subpattern such as (?(3)a|b) is
+ Return the number of the highest backreference in the pattern. The
+ third argument should point to an uint32_t variable. Named subpatterns
+ acquire numbers as well as names, and these count towards the highest
+ backreference. Backreferences such as \4 or \g{12} match the captured
+ characters of the given group, but in addition, the check that a cap-
+ turing group is set in a conditional subpattern such as (?(3)a|b) is
also a backreference. Zero is returned if there are no backreferences.
PCRE2_INFO_BSR
- The output is a uint32_t integer whose value indicates what character
- sequences the \R escape sequence matches. A value of PCRE2_BSR_UNICODE
- means that \R matches any Unicode line ending sequence; a value of
+ The output is a uint32_t integer whose value indicates what character
+ sequences the \R escape sequence matches. A value of PCRE2_BSR_UNICODE
+ means that \R matches any Unicode line ending sequence; a value of
PCRE2_BSR_ANYCRLF means that \R matches only CR, LF, or CRLF.
PCRE2_INFO_CAPTURECOUNT
- Return the highest capturing subpattern number in the pattern. In pat-
+ Return the highest capturing subpattern number in the pattern. In pat-
terns where (?| is not used, this is also the total number of capturing
subpatterns. The third argument should point to an uint32_t variable.
PCRE2_INFO_DEPTHLIMIT
- If the pattern set a backtracking depth limit by including an item of
- the form (*LIMIT_DEPTH=nnnn) at the start, the value is returned. The
+ If the pattern set a backtracking depth limit by including an item of
+ the form (*LIMIT_DEPTH=nnnn) at the start, the value is returned. The
third argument should point to a uint32_t integer. If no such value has
- been set, the call to pcre2_pattern_info() returns the error
+ been set, the call to pcre2_pattern_info() returns the error
PCRE2_ERROR_UNSET. Note that this limit will only be used during match-
- ing if it is less than the limit set or defaulted by the caller of the
+ ing if it is less than the limit set or defaulted by the caller of the
match function.
PCRE2_INFO_FIRSTBITMAP
- In the absence of a single first code unit for a non-anchored pattern,
- pcre2_compile() may construct a 256-bit table that defines a fixed set
- of values for the first code unit in any match. For example, a pattern
- that starts with [abc] results in a table with three bits set. When
- code unit values greater than 255 are supported, the flag bit for 255
- means "any code unit of value 255 or above". If such a table was con-
- structed, a pointer to it is returned. Otherwise NULL is returned. The
+ In the absence of a single first code unit for a non-anchored pattern,
+ pcre2_compile() may construct a 256-bit table that defines a fixed set
+ of values for the first code unit in any match. For example, a pattern
+ that starts with [abc] results in a table with three bits set. When
+ code unit values greater than 255 are supported, the flag bit for 255
+ means "any code unit of value 255 or above". If such a table was con-
+ structed, a pointer to it is returned. Otherwise NULL is returned. The
third argument should point to a const uint8_t * variable.
PCRE2_INFO_FIRSTCODETYPE
Return information about the first code unit of any matched string, for
- a non-anchored pattern. The third argument should point to an uint32_t
- variable. If there is a fixed first value, for example, the letter "c"
- from a pattern such as (cat|cow|coyote), 1 is returned, and the value
- can be retrieved using PCRE2_INFO_FIRSTCODEUNIT. If there is no fixed
- first value, but it is known that a match can occur only at the start
- of the subject or following a newline in the subject, 2 is returned.
+ a non-anchored pattern. The third argument should point to an uint32_t
+ variable. If there is a fixed first value, for example, the letter "c"
+ from a pattern such as (cat|cow|coyote), 1 is returned, and the value
+ can be retrieved using PCRE2_INFO_FIRSTCODEUNIT. If there is no fixed
+ first value, but it is known that a match can occur only at the start
+ of the subject or following a newline in the subject, 2 is returned.
Otherwise, and for anchored patterns, 0 is returned.
PCRE2_INFO_FIRSTCODEUNIT
- Return the value of the first code unit of any matched string for a
- pattern where PCRE2_INFO_FIRSTCODETYPE returns 1; otherwise return 0.
- The third argument should point to an uint32_t variable. In the 8-bit
- library, the value is always less than 256. In the 16-bit library the
- value can be up to 0xffff. In the 32-bit library in UTF-32 mode the
+ Return the value of the first code unit of any matched string for a
+ pattern where PCRE2_INFO_FIRSTCODETYPE returns 1; otherwise return 0.
+ The third argument should point to an uint32_t variable. In the 8-bit
+ library, the value is always less than 256. In the 16-bit library the
+ value can be up to 0xffff. In the 32-bit library in UTF-32 mode the
value can be up to 0x10ffff, and up to 0xffffffff when not using UTF-32
mode.
@@ -2086,23 +2087,23 @@
PCRE2_INFO_FRAMESIZE
Return the size (in bytes) of the data frames that are used to remember
- backtracking positions when the pattern is processed by pcre2_match()
- without the use of JIT. The third argument should point to a size_t
+ backtracking positions when the pattern is processed by pcre2_match()
+ without the use of JIT. The third argument should point to a size_t
variable. The frame size depends on the number of capturing parentheses
- in the pattern. Each additional capturing group adds two PCRE2_SIZE
+ in the pattern. Each additional capturing group adds two PCRE2_SIZE
variables.
PCRE2_INFO_HASBACKSLASHC
- Return 1 if the pattern contains any instances of \C, otherwise 0. The
+ Return 1 if the pattern contains any instances of \C, otherwise 0. The
third argument should point to an uint32_t variable.
PCRE2_INFO_HASCRORLF
- Return 1 if the pattern contains any explicit matches for CR or LF
+ Return 1 if the pattern contains any explicit matches for CR or LF
characters, otherwise 0. The third argument should point to an uint32_t
- variable. An explicit match is either a literal CR or LF character, or
- \r or \n or one of the equivalent hexadecimal or octal escape
+ variable. An explicit match is either a literal CR or LF character, or
+ \r or \n or one of the equivalent hexadecimal or octal escape
sequences.
PCRE2_INFO_HEAPLIMIT
@@ -2110,81 +2111,81 @@
If the pattern set a heap memory limit by including an item of the form
(*LIMIT_HEAP=nnnn) at the start, the value is returned. The third argu-
ment should point to a uint32_t integer. If no such value has been set,
- the call to pcre2_pattern_info() returns the error PCRE2_ERROR_UNSET.
- Note that this limit will only be used during matching if it is less
+ the call to pcre2_pattern_info() returns the error PCRE2_ERROR_UNSET.
+ Note that this limit will only be used during matching if it is less
than the limit set or defaulted by the caller of the match function.
PCRE2_INFO_JCHANGED
- Return 1 if the (?J) or (?-J) option setting is used in the pattern,
- otherwise 0. The third argument should point to an uint32_t variable.
- (?J) and (?-J) set and unset the local PCRE2_DUPNAMES option, respec-
+ Return 1 if the (?J) or (?-J) option setting is used in the pattern,
+ otherwise 0. The third argument should point to an uint32_t variable.
+ (?J) and (?-J) set and unset the local PCRE2_DUPNAMES option, respec-
tively.
PCRE2_INFO_JITSIZE
- If the compiled pattern was successfully processed by pcre2_jit_com-
- pile(), return the size of the JIT compiled code, otherwise return
+ If the compiled pattern was successfully processed by pcre2_jit_com-
+ pile(), return the size of the JIT compiled code, otherwise return
zero. The third argument should point to a size_t variable.
PCRE2_INFO_LASTCODETYPE
- Returns 1 if there is a rightmost literal code unit that must exist in
- any matched string, other than at its start. The third argument should
- point to an uint32_t variable. If there is no such value, 0 is
- returned. When 1 is returned, the code unit value itself can be
- retrieved using PCRE2_INFO_LASTCODEUNIT. For anchored patterns, a last
- literal value is recorded only if it follows something of variable
- length. For example, for the pattern /^a\d+z\d+/ the returned value is
- 1 (with "z" returned from PCRE2_INFO_LASTCODEUNIT), but for /^a\dz\d/
+ Returns 1 if there is a rightmost literal code unit that must exist in
+ any matched string, other than at its start. The third argument should
+ point to an uint32_t variable. If there is no such value, 0 is
+ returned. When 1 is returned, the code unit value itself can be
+ retrieved using PCRE2_INFO_LASTCODEUNIT. For anchored patterns, a last
+ literal value is recorded only if it follows something of variable
+ length. For example, for the pattern /^a\d+z\d+/ the returned value is
+ 1 (with "z" returned from PCRE2_INFO_LASTCODEUNIT), but for /^a\dz\d/
the returned value is 0.
PCRE2_INFO_LASTCODEUNIT
- Return the value of the rightmost literal code unit that must exist in
- any matched string, other than at its start, for a pattern where
+ Return the value of the rightmost literal code unit that must exist in
+ any matched string, other than at its start, for a pattern where
PCRE2_INFO_LASTCODETYPE returns 1. Otherwise, return 0. The third argu-
ment should point to an uint32_t variable.
PCRE2_INFO_MATCHEMPTY
- Return 1 if the pattern might match an empty string, otherwise 0. The
- third argument should point to an uint32_t variable. When a pattern
+ Return 1 if the pattern might match an empty string, otherwise 0. The
+ third argument should point to an uint32_t variable. When a pattern
contains recursive subroutine calls it is not always possible to deter-
- mine whether or not it can match an empty string. PCRE2 takes a cau-
+ mine whether or not it can match an empty string. PCRE2 takes a cau-
tious approach and returns 1 in such cases.
PCRE2_INFO_MATCHLIMIT
- If the pattern set a match limit by including an item of the form
- (*LIMIT_MATCH=nnnn) at the start, the value is returned. The third
- argument should point to a uint32_t integer. If no such value has been
- set, the call to pcre2_pattern_info() returns the error
+ If the pattern set a match limit by including an item of the form
+ (*LIMIT_MATCH=nnnn) at the start, the value is returned. The third
+ argument should point to a uint32_t integer. If no such value has been
+ set, the call to pcre2_pattern_info() returns the error
PCRE2_ERROR_UNSET. Note that this limit will only be used during match-
- ing if it is less than the limit set or defaulted by the caller of the
+ ing if it is less than the limit set or defaulted by the caller of the
match function.
PCRE2_INFO_MAXLOOKBEHIND
Return the number of characters (not code units) in the longest lookbe-
- hind assertion in the pattern. The third argument should point to a
- uint32_t integer. This information is useful when doing multi-segment
- matching using the partial matching facilities. Note that the simple
+ hind assertion in the pattern. The third argument should point to a
+ uint32_t integer. This information is useful when doing multi-segment
+ matching using the partial matching facilities. Note that the simple
assertions \b and \B require a one-character lookbehind. \A also regis-
- ters a one-character lookbehind, though it does not actually inspect
- the previous character. This is to ensure that at least one character
- from the old segment is retained when a new segment is processed. Oth-
- erwise, if there are no lookbehinds in the pattern, \A might match
+ ters a one-character lookbehind, though it does not actually inspect
+ the previous character. This is to ensure that at least one character
+ from the old segment is retained when a new segment is processed. Oth-
+ erwise, if there are no lookbehinds in the pattern, \A might match
incorrectly at the start of a second or subsequent segment.
PCRE2_INFO_MINLENGTH
- If a minimum length for matching subject strings was computed, its
- value is returned. Otherwise the returned value is 0. The value is a
- number of characters, which in UTF mode may be different from the num-
- ber of code units. The third argument should point to an uint32_t
- variable. The value is a lower bound to the length of any matching
- string. There may not be any strings of that length that do actually
+ If a minimum length for matching subject strings was computed, its
+ value is returned. Otherwise the returned value is 0. The value is a
+ number of characters, which in UTF mode may be different from the num-
+ ber of code units. The third argument should point to an uint32_t
+ variable. The value is a lower bound to the length of any matching
+ string. There may not be any strings of that length that do actually
match, but every string that does match is at least that long.
PCRE2_INFO_NAMECOUNT
@@ -2192,50 +2193,50 @@
PCRE2_INFO_NAMETABLE
PCRE2 supports the use of named as well as numbered capturing parenthe-
- ses. The names are just an additional way of identifying the parenthe-
+ ses. The names are just an additional way of identifying the parenthe-
ses, which still acquire numbers. Several convenience functions such as
- pcre2_substring_get_byname() are provided for extracting captured sub-
- strings by name. It is also possible to extract the data directly, by
- first converting the name to a number in order to access the correct
- pointers in the output vector (described with pcre2_match() below). To
- do the conversion, you need to use the name-to-number map, which is
+ pcre2_substring_get_byname() are provided for extracting captured sub-
+ strings by name. It is also possible to extract the data directly, by
+ first converting the name to a number in order to access the correct
+ pointers in the output vector (described with pcre2_match() below). To
+ do the conversion, you need to use the name-to-number map, which is
described by these three values.
- The map consists of a number of fixed-size entries. PCRE2_INFO_NAME-
- COUNT gives the number of entries, and PCRE2_INFO_NAMEENTRYSIZE gives
- the size of each entry in code units; both of these return a uint32_t
+ The map consists of a number of fixed-size entries. PCRE2_INFO_NAME-
+ COUNT gives the number of entries, and PCRE2_INFO_NAMEENTRYSIZE gives
+ the size of each entry in code units; both of these return a uint32_t
value. The entry size depends on the length of the longest name.
PCRE2_INFO_NAMETABLE returns a pointer to the first entry of the table.
- This is a PCRE2_SPTR pointer to a block of code units. In the 8-bit
- library, the first two bytes of each entry are the number of the cap-
+ This is a PCRE2_SPTR pointer to a block of code units. In the 8-bit
+ library, the first two bytes of each entry are the number of the cap-
turing parenthesis, most significant byte first. In the 16-bit library,
- the pointer points to 16-bit code units, the first of which contains
- the parenthesis number. In the 32-bit library, the pointer points to
- 32-bit code units, the first of which contains the parenthesis number.
+ the pointer points to 16-bit code units, the first of which contains
+ the parenthesis number. In the 32-bit library, the pointer points to
+ 32-bit code units, the first of which contains the parenthesis number.
The rest of the entry is the corresponding name, zero terminated.
- The names are in alphabetical order. If (?| is used to create multiple
- groups with the same number, as described in the section on duplicate
- subpattern numbers in the pcre2pattern page, the groups may be given
- the same name, but there is only one entry in the table. Different
+ The names are in alphabetical order. If (?| is used to create multiple
+ groups with the same number, as described in the section on duplicate
+ subpattern numbers in the pcre2pattern page, the groups may be given
+ the same name, but there is only one entry in the table. Different
names for groups of the same number are not permitted.
- Duplicate names for subpatterns with different numbers are permitted,
- but only if PCRE2_DUPNAMES is set. They appear in the table in the
- order in which they were found in the pattern. In the absence of (?|
- this is the order of increasing number; when (?| is used this is not
+ Duplicate names for subpatterns with different numbers are permitted,
+ but only if PCRE2_DUPNAMES is set. They appear in the table in the
+ order in which they were found in the pattern. In the absence of (?|
+ this is the order of increasing number; when (?| is used this is not
necessarily the case because later subpatterns may have lower numbers.
- As a simple example of the name/number table, consider the following
- pattern after compilation by the 8-bit library (assume PCRE2_EXTENDED
+ As a simple example of the name/number table, consider the following
+ pattern after compilation by the 8-bit library (assume PCRE2_EXTENDED
is set, so white space - including newlines - is ignored):
(?<date> (?<year>(\d\d)?\d\d) -
(?<month>\d\d) - (?<day>\d\d) )
- There are four named subpatterns, so the table has four entries, and
- each entry in the table is eight bytes long. The table is as follows,
+ There are four named subpatterns, so the table has four entries, and
+ each entry in the table is eight bytes long. The table is as follows,
with non-printing bytes shows in hexadecimal, and undefined bytes shown
as ??:
@@ -2244,8 +2245,8 @@
00 04 m o n t h 00
00 02 y e a r 00 ??
- When writing code to extract data from named subpatterns using the
- name-to-number map, remember that the length of the entries is likely
+ When writing code to extract data from named subpatterns using the
+ name-to-number map, remember that the length of the entries is likely
to be different for each compiled pattern.
PCRE2_INFO_NEWLINE
@@ -2264,14 +2265,14 @@
PCRE2_INFO_SIZE
- Return the size of the compiled pattern in bytes (for all three
- libraries). The third argument should point to a size_t variable. This
- value includes the size of the general data block that precedes the
- code units of the compiled pattern itself. The value that is used when
- pcre2_compile() is getting memory in which to place the compiled pat-
- tern may be slightly larger than the value returned by this option,
- because there are cases where the code that calculates the size has to
- over-estimate. Processing a pattern with the JIT compiler does not
+ Return the size of the compiled pattern in bytes (for all three
+ libraries). The third argument should point to a size_t variable. This
+ value includes the size of the general data block that precedes the
+ code units of the compiled pattern itself. The value that is used when
+ pcre2_compile() is getting memory in which to place the compiled pat-
+ tern may be slightly larger than the value returned by this option,
+ because there are cases where the code that calculates the size has to
+ over-estimate. Processing a pattern with the JIT compiler does not
alter the value returned by this option.
@@ -2282,30 +2283,30 @@
void *user_data);
A script language that supports the use of string arguments in callouts
- might like to scan all the callouts in a pattern before running the
+ might like to scan all the callouts in a pattern before running the
match. This can be done by calling pcre2_callout_enumerate(). The first
- argument is a pointer to a compiled pattern, the second points to a
- callback function, and the third is arbitrary user data. The callback
- function is called for every callout in the pattern in the order in
+ argument is a pointer to a compiled pattern, the second points to a
+ callback function, and the third is arbitrary user data. The callback
+ function is called for every callout in the pattern in the order in
which they appear. Its first argument is a pointer to a callout enumer-
- ation block, and its second argument is the user_data value that was
- passed to pcre2_callout_enumerate(). The contents of the callout enu-
- meration block are described in the pcre2callout documentation, which
+ ation block, and its second argument is the user_data value that was
+ passed to pcre2_callout_enumerate(). The contents of the callout enu-
+ meration block are described in the pcre2callout documentation, which
also gives further details about callouts.
SERIALIZATION AND PRECOMPILING
- It is possible to save compiled patterns on disc or elsewhere, and
- reload them later, subject to a number of restrictions. The host on
- which the patterns are reloaded must be running the same version of
+ It is possible to save compiled patterns on disc or elsewhere, and
+ reload them later, subject to a number of restrictions. The host on
+ which the patterns are reloaded must be running the same version of
PCRE2, with the same code unit width, and must also have the same endi-
- anness, pointer width, and PCRE2_SIZE type. Before compiled patterns
- can be saved, they must be converted to a "serialized" form, which in
- the case of PCRE2 is really just a bytecode dump. The functions whose
- names begin with pcre2_serialize_ are used for converting to and from
- the serialized form. They are described in the pcre2serialize documen-
- tation. Note that PCRE2 serialization does not convert compiled pat-
+ anness, pointer width, and PCRE2_SIZE type. Before compiled patterns
+ can be saved, they must be converted to a "serialized" form, which in
+ the case of PCRE2 is really just a bytecode dump. The functions whose
+ names begin with pcre2_serialize_ are used for converting to and from
+ the serialized form. They are described in the pcre2serialize documen-
+ tation. Note that PCRE2 serialization does not convert compiled pat-
terns to an abstract format like Java or .NET serialization.
@@ -2319,57 +2320,57 @@
void pcre2_match_data_free(pcre2_match_data *match_data);
- Information about a successful or unsuccessful match is placed in a
- match data block, which is an opaque structure that is accessed by
- function calls. In particular, the match data block contains a vector
- of offsets into the subject string that define the matched part of the
- subject and any substrings that were captured. This is known as the
+ Information about a successful or unsuccessful match is placed in a
+ match data block, which is an opaque structure that is accessed by
+ function calls. In particular, the match data block contains a vector
+ of offsets into the subject string that define the matched part of the
+ subject and any substrings that were captured. This is known as the
ovector.
- Before calling pcre2_match(), pcre2_dfa_match(), or pcre2_jit_match()
+ Before calling pcre2_match(), pcre2_dfa_match(), or pcre2_jit_match()
you must create a match data block by calling one of the creation func-
- tions above. For pcre2_match_data_create(), the first argument is the
- number of pairs of offsets in the ovector. One pair of offsets is
+ tions above. For pcre2_match_data_create(), the first argument is the
+ number of pairs of offsets in the ovector. One pair of offsets is
required to identify the string that matched the whole pattern, with an
- additional pair for each captured substring. For example, a value of 4
- creates enough space to record the matched portion of the subject plus
- three captured substrings. A minimum of at least 1 pair is imposed by
+ additional pair for each captured substring. For example, a value of 4
+ creates enough space to record the matched portion of the subject plus
+ three captured substrings. A minimum of at least 1 pair is imposed by
pcre2_match_data_create(), so it is always possible to return the over-
all matched string.
The second argument of pcre2_match_data_create() is a pointer to a gen-
- eral context, which can specify custom memory management for obtaining
+ eral context, which can specify custom memory management for obtaining
the memory for the match data block. If you are not using custom memory
management, pass NULL, which causes malloc() to be used.
- For pcre2_match_data_create_from_pattern(), the first argument is a
+ For pcre2_match_data_create_from_pattern(), the first argument is a
pointer to a compiled pattern. The ovector is created to be exactly the
right size to hold all the substrings a pattern might capture. The sec-
- ond argument is again a pointer to a general context, but in this case
+ ond argument is again a pointer to a general context, but in this case
if NULL is passed, the memory is obtained using the same allocator that
was used for the compiled pattern (custom or default).
- A match data block can be used many times, with the same or different
- compiled patterns. You can extract information from a match data block
+ A match data block can be used many times, with the same or different
+ compiled patterns. You can extract information from a match data block
after a match operation has finished, using functions that are
- described in the sections on matched strings and other match data
+ described in the sections on matched strings and other match data
below.
- When a call of pcre2_match() fails, valid data is available in the
- match block only when the error is PCRE2_ERROR_NOMATCH,
- PCRE2_ERROR_PARTIAL, or one of the error codes for an invalid UTF
+ When a call of pcre2_match() fails, valid data is available in the
+ match block only when the error is PCRE2_ERROR_NOMATCH,
+ PCRE2_ERROR_PARTIAL, or one of the error codes for an invalid UTF
string. Exactly what is available depends on the error, and is detailed
below.
- When one of the matching functions is called, pointers to the compiled
- pattern and the subject string are set in the match data block so that
- they can be referenced by the extraction functions. After running a
- match, you must not free a compiled pattern or a subject string until
- after all operations on the match data block (for that match) have
+ When one of the matching functions is called, pointers to the compiled
+ pattern and the subject string are set in the match data block so that
+ they can be referenced by the extraction functions. After running a
+ match, you must not free a compiled pattern or a subject string until
+ after all operations on the match data block (for that match) have
taken place.
- When a match data block itself is no longer needed, it should be freed
- by calling pcre2_match_data_free(). If this function is called with a
+ When a match data block itself is no longer needed, it should be freed
+ by calling pcre2_match_data_free(). If this function is called with a
NULL argument, it returns immediately, without doing anything.
@@ -2380,15 +2381,15 @@
uint32_t options, pcre2_match_data *match_data,
pcre2_match_context *mcontext);
- The function pcre2_match() is called to match a subject string against
- a compiled pattern, which is passed in the code argument. You can call
+ The function pcre2_match() is called to match a subject string against
+ a compiled pattern, which is passed in the code argument. You can call
pcre2_match() with the same code argument as many times as you like, in
- order to find multiple matches in the subject string or to match dif-
+ order to find multiple matches in the subject string or to match dif-
ferent subject strings with the same pattern.
- This function is the main matching facility of the library, and it
- operates in a Perl-like manner. For specialist use there is also an
- alternative matching function, which is described below in the section
+ This function is the main matching facility of the library, and it
+ operates in a Perl-like manner. For specialist use there is also an
+ alternative matching function, which is described below in the section
about the pcre2_dfa_match() function.
Here is an example of a simple call to pcre2_match():
@@ -2403,7 +2404,7 @@
md, /* the match data block */
NULL); /* a match context; NULL means use defaults */
- If the subject string is zero-terminated, the length can be given as
+ If the subject string is zero-terminated, the length can be given as
PCRE2_ZERO_TERMINATED. A match context must be provided if certain less
common matching parameters are to be changed. For details, see the sec-
tion on the match context above.
@@ -2410,92 +2411,92 @@
The string to be matched by pcre2_match()
- The subject string is passed to pcre2_match() as a pointer in subject,
- a length in length, and a starting offset in startoffset. The length
- and offset are in code units, not characters. That is, they are in
- bytes for the 8-bit library, 16-bit code units for the 16-bit library,
- and 32-bit code units for the 32-bit library, whether or not UTF pro-
+ The subject string is passed to pcre2_match() as a pointer in subject,
+ a length in length, and a starting offset in startoffset. The length
+ and offset are in code units, not characters. That is, they are in
+ bytes for the 8-bit library, 16-bit code units for the 16-bit library,
+ and 32-bit code units for the 32-bit library, whether or not UTF pro-
cessing is enabled.
If startoffset is greater than the length of the subject, pcre2_match()
- returns PCRE2_ERROR_BADOFFSET. When the starting offset is zero, the
- search for a match starts at the beginning of the subject, and this is
+ returns PCRE2_ERROR_BADOFFSET. When the starting offset is zero, the
+ search for a match starts at the beginning of the subject, and this is
by far the most common case. In UTF-8 or UTF-16 mode, the starting off-
- set must point to the start of a character, or to the end of the sub-
- ject (in UTF-32 mode, one code unit equals one character, so all off-
- sets are valid). Like the pattern string, the subject may contain
+ set must point to the start of a character, or to the end of the sub-
+ ject (in UTF-32 mode, one code unit equals one character, so all off-
+ sets are valid). Like the pattern string, the subject may contain
binary zeros.
- A non-zero starting offset is useful when searching for another match
- in the same subject by calling pcre2_match() again after a previous
- success. Setting startoffset differs from passing over a shortened
- string and setting PCRE2_NOTBOL in the case of a pattern that begins
+ A non-zero starting offset is useful when searching for another match
+ in the same subject by calling pcre2_match() again after a previous
+ success. Setting startoffset differs from passing over a shortened
+ string and setting PCRE2_NOTBOL in the case of a pattern that begins
with any kind of lookbehind. For example, consider the pattern
\Biss\B
- which finds occurrences of "iss" in the middle of words. (\B matches
- only if the current position in the subject is not a word boundary.)
+ which finds occurrences of "iss" in the middle of words. (\B matches
+ only if the current position in the subject is not a word boundary.)
When applied to the string "Mississipi" the first call to pcre2_match()
- finds the first occurrence. If pcre2_match() is called again with just
- the remainder of the subject, namely "issipi", it does not match,
+ finds the first occurrence. If pcre2_match() is called again with just
+ the remainder of the subject, namely "issipi", it does not match,
because \B is always false at the start of the subject, which is deemed
- to be a word boundary. However, if pcre2_match() is passed the entire
+ to be a word boundary. However, if pcre2_match() is passed the entire
string again, but with startoffset set to 4, it finds the second occur-
- rence of "iss" because it is able to look behind the starting point to
+ rence of "iss" because it is able to look behind the starting point to
discover that it is preceded by a letter.
- Finding all the matches in a subject is tricky when the pattern can
+ Finding all the matches in a subject is tricky when the pattern can
match an empty string. It is possible to emulate Perl's /g behaviour by
- first trying the match again at the same offset, with the
- PCRE2_NOTEMPTY_ATSTART and PCRE2_ANCHORED options, and then if that
- fails, advancing the starting offset and trying an ordinary match
- again. There is some code that demonstrates how to do this in the
- pcre2demo sample program. In the most general case, you have to check
- to see if the newline convention recognizes CRLF as a newline, and if
- so, and the current character is CR followed by LF, advance the start-
+ first trying the match again at the same offset, with the
+ PCRE2_NOTEMPTY_ATSTART and PCRE2_ANCHORED options, and then if that
+ fails, advancing the starting offset and trying an ordinary match
+ again. There is some code that demonstrates how to do this in the
+ pcre2demo sample program. In the most general case, you have to check
+ to see if the newline convention recognizes CRLF as a newline, and if
+ so, and the current character is CR followed by LF, advance the start-
ing offset by two characters instead of one.
If a non-zero starting offset is passed when the pattern is anchored, a
single attempt to match at the given offset is made. This can only suc-
- ceed if the pattern does not require the match to be at the start of
- the subject. In other words, the anchoring must be the result of set-
- ting the PCRE2_ANCHORED option or the use of .* with PCRE2_DOTALL, not
+ ceed if the pattern does not require the match to be at the start of
+ the subject. In other words, the anchoring must be the result of set-
+ ting the PCRE2_ANCHORED option or the use of .* with PCRE2_DOTALL, not
by starting the pattern with ^ or \A.
Option bits for pcre2_match()
The unused bits of the options argument for pcre2_match() must be zero.
- The only bits that may be set are PCRE2_ANCHORED, PCRE2_ENDANCHORED,
- PCRE2_NOTBOL, PCRE2_NOTEOL, PCRE2_NOTEMPTY, PCRE2_NOTEMPTY_ATSTART,
- PCRE2_NO_JIT, PCRE2_NO_UTF_CHECK, PCRE2_PARTIAL_HARD, and PCRE2_PAR-
+ The only bits that may be set are PCRE2_ANCHORED, PCRE2_ENDANCHORED,
+ PCRE2_NOTBOL, PCRE2_NOTEOL, PCRE2_NOTEMPTY, PCRE2_NOTEMPTY_ATSTART,
+ PCRE2_NO_JIT, PCRE2_NO_UTF_CHECK, PCRE2_PARTIAL_HARD, and PCRE2_PAR-
TIAL_SOFT. Their action is described below.
- Setting PCRE2_ANCHORED or PCRE2_ENDANCHORED at match time is not sup-
- ported by the just-in-time (JIT) compiler. If it is set, JIT matching
- is disabled and the interpretive code in pcre2_match() is run. Apart
- from PCRE2_NO_JIT (obviously), the remaining options are supported for
+ Setting PCRE2_ANCHORED or PCRE2_ENDANCHORED at match time is not sup-
+ ported by the just-in-time (JIT) compiler. If it is set, JIT matching
+ is disabled and the interpretive code in pcre2_match() is run. Apart
+ from PCRE2_NO_JIT (obviously), the remaining options are supported for
JIT matching.
PCRE2_ANCHORED
The PCRE2_ANCHORED option limits pcre2_match() to matching at the first
- matching position. If a pattern was compiled with PCRE2_ANCHORED, or
- turned out to be anchored by virtue of its contents, it cannot be made
- unachored at matching time. Note that setting the option at match time
+ matching position. If a pattern was compiled with PCRE2_ANCHORED, or
+ turned out to be anchored by virtue of its contents, it cannot be made
+ unachored at matching time. Note that setting the option at match time
disables JIT matching.
PCRE2_ENDANCHORED
- If the PCRE2_ENDANCHORED option is set, any string that pcre2_match()
- matches must be right at the end of the subject string. Note that set-
+ If the PCRE2_ENDANCHORED option is set, any string that pcre2_match()
+ matches must be right at the end of the subject string. Note that set-
ting the option at match time disables JIT matching.
PCRE2_NOTBOL
This option specifies that first character of the subject string is not
- the beginning of a line, so the circumflex metacharacter should not
- match before it. Setting this without having set PCRE2_MULTILINE at
+ the beginning of a line, so the circumflex metacharacter should not
+ match before it. Setting this without having set PCRE2_MULTILINE at
compile time causes circumflex never to match. This option affects only
the behaviour of the circumflex metacharacter. It does not affect \A.
@@ -2502,9 +2503,9 @@
PCRE2_NOTEOL
This option specifies that the end of the subject string is not the end
- of a line, so the dollar metacharacter should not match it nor (except
- in multiline mode) a newline immediately before it. Setting this with-
- out having set PCRE2_MULTILINE at compile time causes dollar never to
+ of a line, so the dollar metacharacter should not match it nor (except
+ in multiline mode) a newline immediately before it. Setting this with-
+ out having set PCRE2_MULTILINE at compile time causes dollar never to
match. This option affects only the behaviour of the dollar metacharac-
ter. It does not affect \Z or \z.
@@ -2511,79 +2512,79 @@
PCRE2_NOTEMPTY
An empty string is not considered to be a valid match if this option is
- set. If there are alternatives in the pattern, they are tried. If all
- the alternatives match the empty string, the entire match fails. For
+ set. If there are alternatives in the pattern, they are tried. If all
+ the alternatives match the empty string, the entire match fails. For
example, if the pattern
a?b?
- is applied to a string not beginning with "a" or "b", it matches an
+ is applied to a string not beginning with "a" or "b", it matches an
empty string at the start of the subject. With PCRE2_NOTEMPTY set, this
- match is not valid, so pcre2_match() searches further into the string
+ match is not valid, so pcre2_match() searches further into the string
for occurrences of "a" or "b".
PCRE2_NOTEMPTY_ATSTART
- This is like PCRE2_NOTEMPTY, except that it locks out an empty string
+ This is like PCRE2_NOTEMPTY, except that it locks out an empty string
match only at the first matching position, that is, at the start of the
- subject plus the starting offset. An empty string match later in the
- subject is permitted. If the pattern is anchored, such a match can
+ subject plus the starting offset. An empty string match later in the
+ subject is permitted. If the pattern is anchored, such a match can
occur only if the pattern contains \K.
PCRE2_NO_JIT
- By default, if a pattern has been successfully processed by
- pcre2_jit_compile(), JIT is automatically used when pcre2_match() is
- called with options that JIT supports. Setting PCRE2_NO_JIT disables
+ By default, if a pattern has been successfully processed by
+ pcre2_jit_compile(), JIT is automatically used when pcre2_match() is
+ called with options that JIT supports. Setting PCRE2_NO_JIT disables
the use of JIT; it forces matching to be done by the interpreter.
PCRE2_NO_UTF_CHECK
When PCRE2_UTF is set at compile time, the validity of the subject as a
- UTF string is checked by default when pcre2_match() is subsequently
- called. If a non-zero starting offset is given, the check is applied
- only to that part of the subject that could be inspected during match-
- ing, and there is a check that the starting offset points to the first
- code unit of a character or to the end of the subject. If there are no
- lookbehind assertions in the pattern, the check starts at the starting
- offset. Otherwise, it starts at the length of the longest lookbehind
+ UTF string is checked by default when pcre2_match() is subsequently
+ called. If a non-zero starting offset is given, the check is applied
+ only to that part of the subject that could be inspected during match-
+ ing, and there is a check that the starting offset points to the first
+ code unit of a character or to the end of the subject. If there are no
+ lookbehind assertions in the pattern, the check starts at the starting
+ offset. Otherwise, it starts at the length of the longest lookbehind
before the starting offset, or at the start of the subject if there are
- not that many characters before the starting offset. Note that the
+ not that many characters before the starting offset. Note that the
sequences \b and \B are one-character lookbehinds.
The check is carried out before any other processing takes place, and a
- negative error code is returned if the check fails. There are several
- UTF error codes for each code unit width, corresponding to different
- problems with the code unit sequence. There are discussions about the
- validity of UTF-8 strings, UTF-16 strings, and UTF-32 strings in the
+ negative error code is returned if the check fails. There are several
+ UTF error codes for each code unit width, corresponding to different
+ problems with the code unit sequence. There are discussions about the
+ validity of UTF-8 strings, UTF-16 strings, and UTF-32 strings in the
pcre2unicode page.
- If you know that your subject is valid, and you want to skip these
- checks for performance reasons, you can set the PCRE2_NO_UTF_CHECK
- option when calling pcre2_match(). You might want to do this for the
+ If you know that your subject is valid, and you want to skip these
+ checks for performance reasons, you can set the PCRE2_NO_UTF_CHECK
+ option when calling pcre2_match(). You might want to do this for the
second and subsequent calls to pcre2_match() if you are making repeated
calls to find other matches in the same subject string.
- Warning: When PCRE2_NO_UTF_CHECK is set, the effect of passing an
- invalid string as a subject, or an invalid value of startoffset, is
+ Warning: When PCRE2_NO_UTF_CHECK is set, the effect of passing an
+ invalid string as a subject, or an invalid value of startoffset, is
undefined. Your program may crash or loop indefinitely.
PCRE2_PARTIAL_HARD
PCRE2_PARTIAL_SOFT
- These options turn on the partial matching feature. A partial match
- occurs if the end of the subject string is reached successfully, but
- there are not enough subject characters to complete the match. If this
- happens when PCRE2_PARTIAL_SOFT (but not PCRE2_PARTIAL_HARD) is set,
- matching continues by testing any remaining alternatives. Only if no
- complete match can be found is PCRE2_ERROR_PARTIAL returned instead of
- PCRE2_ERROR_NOMATCH. In other words, PCRE2_PARTIAL_SOFT specifies that
- the caller is prepared to handle a partial match, but only if no com-
+ These options turn on the partial matching feature. A partial match
+ occurs if the end of the subject string is reached successfully, but
+ there are not enough subject characters to complete the match. If this
+ happens when PCRE2_PARTIAL_SOFT (but not PCRE2_PARTIAL_HARD) is set,
+ matching continues by testing any remaining alternatives. Only if no
+ complete match can be found is PCRE2_ERROR_PARTIAL returned instead of
+ PCRE2_ERROR_NOMATCH. In other words, PCRE2_PARTIAL_SOFT specifies that
+ the caller is prepared to handle a partial match, but only if no com-
plete match can be found.
- If PCRE2_PARTIAL_HARD is set, it overrides PCRE2_PARTIAL_SOFT. In this
- case, if a partial match is found, pcre2_match() immediately returns
- PCRE2_ERROR_PARTIAL, without considering any other alternatives. In
+ If PCRE2_PARTIAL_HARD is set, it overrides PCRE2_PARTIAL_SOFT. In this
+ case, if a partial match is found, pcre2_match() immediately returns
+ PCRE2_ERROR_PARTIAL, without considering any other alternatives. In
other words, when PCRE2_PARTIAL_HARD is set, a partial match is consid-
ered to be more important that an alternative complete match.
@@ -2593,38 +2594,38 @@
NEWLINE HANDLING WHEN MATCHING
- When PCRE2 is built, a default newline convention is set; this is usu-
- ally the standard convention for the operating system. The default can
- be overridden in a compile context by calling pcre2_set_newline(). It
- can also be overridden by starting a pattern string with, for example,
- (*CRLF), as described in the section on newline conventions in the
- pcre2pattern page. During matching, the newline choice affects the be-
- haviour of the dot, circumflex, and dollar metacharacters. It may also
- alter the way the match starting position is advanced after a match
+ When PCRE2 is built, a default newline convention is set; this is usu-
+ ally the standard convention for the operating system. The default can
+ be overridden in a compile context by calling pcre2_set_newline(). It
+ can also be overridden by starting a pattern string with, for example,
+ (*CRLF), as described in the section on newline conventions in the
+ pcre2pattern page. During matching, the newline choice affects the be-
+ haviour of the dot, circumflex, and dollar metacharacters. It may also
+ alter the way the match starting position is advanced after a match
failure for an unanchored pattern.
When PCRE2_NEWLINE_CRLF, PCRE2_NEWLINE_ANYCRLF, or PCRE2_NEWLINE_ANY is
- set as the newline convention, and a match attempt for an unanchored
+ set as the newline convention, and a match attempt for an unanchored
pattern fails when the current starting position is at a CRLF sequence,
- and the pattern contains no explicit matches for CR or LF characters,
- the match position is advanced by two characters instead of one, in
+ and the pattern contains no explicit matches for CR or LF characters,
+ the match position is advanced by two characters instead of one, in
other words, to after the CRLF.
The above rule is a compromise that makes the most common cases work as
- expected. For example, if the pattern is .+A (and the PCRE2_DOTALL
+ expected. For example, if the pattern is .+A (and the PCRE2_DOTALL
option is not set), it does not match the string "\r\nA" because, after
- failing at the start, it skips both the CR and the LF before retrying.
- However, the pattern [\r\n]A does match that string, because it con-
+ failing at the start, it skips both the CR and the LF before retrying.
+ However, the pattern [\r\n]A does match that string, because it con-
tains an explicit CR or LF reference, and so advances only by one char-
acter after the first failure.
An explicit match for CR of LF is either a literal appearance of one of
- those characters in the pattern, or one of the \r or \n or equivalent
+ those characters in the pattern, or one of the \r or \n or equivalent
octal or hexadecimal escape sequences. Implicit matches such as [^X] do
- not count, nor does \s, even though it includes CR and LF in the char-
+ not count, nor does \s, even though it includes CR and LF in the char-
acters that it matches.
- Notwithstanding the above, anomalous effects may still occur when CRLF
+ Notwithstanding the above, anomalous effects may still occur when CRLF
is a valid newline sequence and explicit \r or \n escapes appear in the
pattern.
@@ -2635,82 +2636,83 @@
PCRE2_SIZE *pcre2_get_ovector_pointer(pcre2_match_data *match_data);
- In general, a pattern matches a certain portion of the subject, and in
- addition, further substrings from the subject may be picked out by
- parenthesized parts of the pattern. Following the usage in Jeffrey
- Friedl's book, this is called "capturing" in what follows, and the
- phrase "capturing subpattern" or "capturing group" is used for a frag-
- ment of a pattern that picks out a substring. PCRE2 supports several
+ In general, a pattern matches a certain portion of the subject, and in
+ addition, further substrings from the subject may be picked out by
+ parenthesized parts of the pattern. Following the usage in Jeffrey
+ Friedl's book, this is called "capturing" in what follows, and the
+ phrase "capturing subpattern" or "capturing group" is used for a frag-
+ ment of a pattern that picks out a substring. PCRE2 supports several
other kinds of parenthesized subpattern that do not cause substrings to
- be captured. The pcre2_pattern_info() function can be used to find out
+ be captured. The pcre2_pattern_info() function can be used to find out
how many capturing subpatterns there are in a compiled pattern.
- You can use auxiliary functions for accessing captured substrings by
+ You can use auxiliary functions for accessing captured substrings by
number or by name, as described in sections below.
Alternatively, you can make direct use of the vector of PCRE2_SIZE val-
- ues, called the ovector, which contains the offsets of captured
- strings. It is part of the match data block. The function
- pcre2_get_ovector_pointer() returns the address of the ovector, and
+ ues, called the ovector, which contains the offsets of captured
+ strings. It is part of the match data block. The function
+ pcre2_get_ovector_pointer() returns the address of the ovector, and
pcre2_get_ovector_count() returns the number of pairs of values it con-
tains.
Within the ovector, the first in each pair of values is set to the off-
set of the first code unit of a substring, and the second is set to the
- offset of the first code unit after the end of a substring. These val-
- ues are always code unit offsets, not character offsets. That is, they
- are byte offsets in the 8-bit library, 16-bit offsets in the 16-bit
+ offset of the first code unit after the end of a substring. These val-
+ ues are always code unit offsets, not character offsets. That is, they
+ are byte offsets in the 8-bit library, 16-bit offsets in the 16-bit
library, and 32-bit offsets in the 32-bit library.
- After a partial match (error return PCRE2_ERROR_PARTIAL), only the
- first pair of offsets (that is, ovector[0] and ovector[1]) are set.
- They identify the part of the subject that was partially matched. See
+ After a partial match (error return PCRE2_ERROR_PARTIAL), only the
+ first pair of offsets (that is, ovector[0] and ovector[1]) are set.
+ They identify the part of the subject that was partially matched. See
the pcre2partial documentation for details of partial matching.
- After a fully successful match, the first pair of offsets identifies
- the portion of the subject string that was matched by the entire pat-
- tern. The next pair is used for the first captured substring, and so
- on. The value returned by pcre2_match() is one more than the highest
- numbered pair that has been set. For example, if two substrings have
- been captured, the returned value is 3. If there are no captured sub-
+ After a fully successful match, the first pair of offsets identifies
+ the portion of the subject string that was matched by the entire pat-
+ tern. The next pair is used for the first captured substring, and so
+ on. The value returned by pcre2_match() is one more than the highest
+ numbered pair that has been set. For example, if two substrings have
+ been captured, the returned value is 3. If there are no captured sub-
strings, the return value from a successful match is 1, indicating that
just the first pair of offsets has been set.
- If a pattern uses the \K escape sequence within a positive assertion,
+ If a pattern uses the \K escape sequence within a positive assertion,
the reported start of a successful match can be greater than the end of
- the match. For example, if the pattern (?=ab\K) is matched against
+ the match. For example, if the pattern (?=ab\K) is matched against
"ab", the start and end offset values for the match are 2 and 0.
- If a capturing subpattern group is matched repeatedly within a single
- match operation, it is the last portion of the subject that it matched
+ If a capturing subpattern group is matched repeatedly within a single
+ match operation, it is the last portion of the subject that it matched
that is returned.
If the ovector is too small to hold all the captured substring offsets,
- as much as possible is filled in, and the function returns a value of
- zero. If captured substrings are not of interest, pcre2_match() may be
+ as much as possible is filled in, and the function returns a value of
+ zero. If captured substrings are not of interest, pcre2_match() may be
called with a match data block whose ovector is of minimum length (that
is, one pair).
- It is possible for capturing subpattern number n+1 to match some part
+ It is possible for capturing subpattern number n+1 to match some part
of the subject when subpattern n has not been used at all. For example,
- if the string "abc" is matched against the pattern (a|(z))(bc) the
+ if the string "abc" is matched against the pattern (a|(z))(bc) the
return from the function is 4, and subpatterns 1 and 3 are matched, but
- 2 is not. When this happens, both values in the offset pairs corre-
+ 2 is not. When this happens, both values in the offset pairs corre-
sponding to unused subpatterns are set to PCRE2_UNSET.
- Offset values that correspond to unused subpatterns at the end of the
- expression are also set to PCRE2_UNSET. For example, if the string
+ Offset values that correspond to unused subpatterns at the end of the
+ expression are also set to PCRE2_UNSET. For example, if the string
"abc" is matched against the pattern (abc)(x(yz)?)? subpatterns 2 and 3
- are not matched. The return from the function is 2, because the high-
+ are not matched. The return from the function is 2, because the high-
est used capturing subpattern number is 1. The offsets for for the sec-
- ond and third capturing subpatterns (assuming the vector is large
+ ond and third capturing subpatterns (assuming the vector is large
enough, of course) are set to PCRE2_UNSET.
Elements in the ovector that do not correspond to capturing parentheses
in the pattern are never changed. That is, if a pattern contains n cap-
turing parentheses, no more than ovector[0] to ovector[2n+1] are set by
- pcre2_match(). The other elements retain whatever values they previ-
- ously had.
+ pcre2_match(). The other elements retain whatever values they previ-
+ ously had. After a failed match attempt, the contents of the ovector
+ are unchanged.
OTHER INFORMATION ABOUT A MATCH
@@ -3101,28 +3103,33 @@
ment functions from the match context, if provided, or else those that
were used to allocate memory for the compiled code.
- The outlengthptr argument must point to a variable that contains the
- length, in code units, of the output buffer. If the function is suc-
- cessful, the value is updated to contain the length of the new string,
+ If an external match_data block is provided, its contents afterwards
+ are those set by the final call to pcre2_match(), which will have ended
+ in a matching error. The contents of the ovector within the match data
+ block may or may not have been changed.
+
+ The outlengthptr argument must point to a variable that contains the
+ length, in code units, of the output buffer. If the function is suc-
+ cessful, the value is updated to contain the length of the new string,
excluding the trailing zero that is automatically added.
- If the function is not successful, the value set via outlengthptr
- depends on the type of error. For syntax errors in the replacement
- string, the value is the offset in the replacement string where the
- error was detected. For other errors, the value is PCRE2_UNSET by
- default. This includes the case of the output buffer being too small,
- unless PCRE2_SUBSTITUTE_OVERFLOW_LENGTH is set (see below), in which
- case the value is the minimum length needed, including space for the
- trailing zero. Note that in order to compute the required length,
- pcre2_substitute() has to simulate all the matching and copying,
+ If the function is not successful, the value set via outlengthptr
+ depends on the type of error. For syntax errors in the replacement
+ string, the value is the offset in the replacement string where the
+ error was detected. For other errors, the value is PCRE2_UNSET by
+ default. This includes the case of the output buffer being too small,
+ unless PCRE2_SUBSTITUTE_OVERFLOW_LENGTH is set (see below), in which
+ case the value is the minimum length needed, including space for the
+ trailing zero. Note that in order to compute the required length,
+ pcre2_substitute() has to simulate all the matching and copying,
instead of giving an error return as soon as the buffer overflows. Note
also that the length is in code units, not bytes.
- In the replacement string, which is interpreted as a UTF string in UTF
- mode, and is checked for UTF validity unless the PCRE2_NO_UTF_CHECK
+ In the replacement string, which is interpreted as a UTF string in UTF
+ mode, and is checked for UTF validity unless the PCRE2_NO_UTF_CHECK
option is set, a dollar character is an escape character that can spec-
- ify the insertion of characters from capturing groups or (*MARK),
- (*PRUNE), or (*THEN) items in the pattern. The following forms are
+ ify the insertion of characters from capturing groups or (*MARK),
+ (*PRUNE), or (*THEN) items in the pattern. The following forms are
always recognized:
$$ insert a dollar character
@@ -3129,19 +3136,19 @@
$<n> or ${<n>} insert the contents of group <n>
$*MARK or ${*MARK} insert a (*MARK), (*PRUNE), or (*THEN) name
- Either a group number or a group name can be given for <n>. Curly
- brackets are required only if the following character would be inter-
+ Either a group number or a group name can be given for <n>. Curly
+ brackets are required only if the following character would be inter-
preted as part of the number or name. The number may be zero to include
- the entire matched string. For example, if the pattern a(b)c is
- matched with "=abc=" and the replacement string "+$1$0$1+", the result
+ the entire matched string. For example, if the pattern a(b)c is
+ matched with "=abc=" and the replacement string "+$1$0$1+", the result
is "=+babcb+=".
$*MARK inserts the name from the last encountered (*MARK), (*PRUNE), or
- (*THEN) on the matching path that has a name. (*MARK) must always
- include a name, but (*PRUNE) and (*THEN) need not. For example, in the
- case of (*MARK:A)(*PRUNE) the name inserted is "A", but for
- (*MARK:A)(*PRUNE:B) the relevant name is "B". This facility can be
- used to perform simple simultaneous substitutions, as this pcre2test
+ (*THEN) on the matching path that has a name. (*MARK) must always
+ include a name, but (*PRUNE) and (*THEN) need not. For example, in the
+ case of (*MARK:A)(*PRUNE) the name inserted is "A", but for
+ (*MARK:A)(*PRUNE:B) the relevant name is "B". This facility can be
+ used to perform simple simultaneous substitutions, as this pcre2test
example shows:
/(*MARK:pear)apple|(*MARK:orange)lemon/g,replace=${*MARK}
@@ -3148,19 +3155,19 @@
apple lemon
2: pear orange
- As well as the usual options for pcre2_match(), a number of additional
+ As well as the usual options for pcre2_match(), a number of additional
options can be set in the options argument of pcre2_substitute().
PCRE2_SUBSTITUTE_GLOBAL causes the function to iterate over the subject
- string, replacing every matching substring. If this option is not set,
- only the first matching substring is replaced. The search for matches
- takes place in the original subject string (that is, previous replace-
- ments do not affect it). Iteration is implemented by advancing the
- startoffset value for each search, which is always passed the entire
+ string, replacing every matching substring. If this option is not set,
+ only the first matching substring is replaced. The search for matches
+ takes place in the original subject string (that is, previous replace-
+ ments do not affect it). Iteration is implemented by advancing the
+ startoffset value for each search, which is always passed the entire
subject string. If an offset limit is set in the match context, search-
ing stops when that limit is reached.
- You can restrict the effect of a global substitution to a portion of
+ You can restrict the effect of a global substitution to a portion of
the subject string by setting either or both of startoffset and an off-
set limit. Here is a pcre2test example:
@@ -3168,87 +3175,87 @@
ABC ABC ABC ABC\=offset=3,offset_limit=12
2: ABC A!C A!C ABC
- When continuing with global substitutions after matching a substring
+ When continuing with global substitutions after matching a substring
with zero length, an attempt to find a non-empty match at the same off-
set is performed. If this is not successful, the offset is advanced by
one character except when CRLF is a valid newline sequence and the next
- two characters are CR, LF. In this case, the offset is advanced by two
+ two characters are CR, LF. In this case, the offset is advanced by two
characters.
- PCRE2_SUBSTITUTE_OVERFLOW_LENGTH changes what happens when the output
+ PCRE2_SUBSTITUTE_OVERFLOW_LENGTH changes what happens when the output
buffer is too small. The default action is to return PCRE2_ERROR_NOMEM-
- ORY immediately. If this option is set, however, pcre2_substitute()
+ ORY immediately. If this option is set, however, pcre2_substitute()
continues to go through the motions of matching and substituting (with-
- out, of course, writing anything) in order to compute the size of buf-
- fer that is needed. This value is passed back via the outlengthptr
- variable, with the result of the function still being
+ out, of course, writing anything) in order to compute the size of buf-
+ fer that is needed. This value is passed back via the outlengthptr
+ variable, with the result of the function still being
PCRE2_ERROR_NOMEMORY.
- Passing a buffer size of zero is a permitted way of finding out how
- much memory is needed for given substitution. However, this does mean
+ Passing a buffer size of zero is a permitted way of finding out how
+ much memory is needed for given substitution. However, this does mean
that the entire operation is carried out twice. Depending on the appli-
- cation, it may be more efficient to allocate a large buffer and free
- the excess afterwards, instead of using PCRE2_SUBSTITUTE_OVER-
+ cation, it may be more efficient to allocate a large buffer and free
+ the excess afterwards, instead of using PCRE2_SUBSTITUTE_OVER-
FLOW_LENGTH.
- PCRE2_SUBSTITUTE_UNKNOWN_UNSET causes references to capturing groups
- that do not appear in the pattern to be treated as unset groups. This
- option should be used with care, because it means that a typo in a
- group name or number no longer causes the PCRE2_ERROR_NOSUBSTRING
+ PCRE2_SUBSTITUTE_UNKNOWN_UNSET causes references to capturing groups
+ that do not appear in the pattern to be treated as unset groups. This
+ option should be used with care, because it means that a typo in a
+ group name or number no longer causes the PCRE2_ERROR_NOSUBSTRING
error.
- PCRE2_SUBSTITUTE_UNSET_EMPTY causes unset capturing groups (including
+ PCRE2_SUBSTITUTE_UNSET_EMPTY causes unset capturing groups (including
unknown groups when PCRE2_SUBSTITUTE_UNKNOWN_UNSET is set) to be
- treated as empty strings when inserted as described above. If this
- option is not set, an attempt to insert an unset group causes the
- PCRE2_ERROR_UNSET error. This option does not influence the extended
+ treated as empty strings when inserted as described above. If this
+ option is not set, an attempt to insert an unset group causes the
+ PCRE2_ERROR_UNSET error. This option does not influence the extended
substitution syntax described below.
- PCRE2_SUBSTITUTE_EXTENDED causes extra processing to be applied to the
- replacement string. Without this option, only the dollar character is
- special, and only the group insertion forms listed above are valid.
+ PCRE2_SUBSTITUTE_EXTENDED causes extra processing to be applied to the
+ replacement string. Without this option, only the dollar character is
+ special, and only the group insertion forms listed above are valid.
When PCRE2_SUBSTITUTE_EXTENDED is set, two things change:
- Firstly, backslash in a replacement string is interpreted as an escape
+ Firstly, backslash in a replacement string is interpreted as an escape
character. The usual forms such as \n or \x{ddd} can be used to specify
- particular character codes, and backslash followed by any non-alphanu-
- meric character quotes that character. Extended quoting can be coded
+ particular character codes, and backslash followed by any non-alphanu-
+ meric character quotes that character. Extended quoting can be coded
using \Q...\E, exactly as in pattern strings.
- There are also four escape sequences for forcing the case of inserted
- letters. The insertion mechanism has three states: no case forcing,
+ There are also four escape sequences for forcing the case of inserted
+ letters. The insertion mechanism has three states: no case forcing,
force upper case, and force lower case. The escape sequences change the
current state: \U and \L change to upper or lower case forcing, respec-
- tively, and \E (when not terminating a \Q quoted sequence) reverts to
- no case forcing. The sequences \u and \l force the next character (if
- it is a letter) to upper or lower case, respectively, and then the
+ tively, and \E (when not terminating a \Q quoted sequence) reverts to
+ no case forcing. The sequences \u and \l force the next character (if
+ it is a letter) to upper or lower case, respectively, and then the
state automatically reverts to no case forcing. Case forcing applies to
all inserted characters, including those from captured groups and let-
ters within \Q...\E quoted sequences.
Note that case forcing sequences such as \U...\E do not nest. For exam-
- ple, the result of processing "\Uaa\LBB\Ecc\E" is "AAbbcc"; the final
+ ple, the result of processing "\Uaa\LBB\Ecc\E" is "AAbbcc"; the final
\E has no effect.
- The second effect of setting PCRE2_SUBSTITUTE_EXTENDED is to add more
- flexibility to group substitution. The syntax is similar to that used
+ The second effect of setting PCRE2_SUBSTITUTE_EXTENDED is to add more
+ flexibility to group substitution. The syntax is similar to that used
by Bash:
${<n>:-<string>}
${<n>:+<string1>:<string2>}
- As before, <n> may be a group number or a name. The first form speci-
- fies a default value. If group <n> is set, its value is inserted; if
- not, <string> is expanded and the result inserted. The second form
- specifies strings that are expanded and inserted when group <n> is set
- or unset, respectively. The first form is just a convenient shorthand
+ As before, <n> may be a group number or a name. The first form speci-
+ fies a default value. If group <n> is set, its value is inserted; if
+ not, <string> is expanded and the result inserted. The second form
+ specifies strings that are expanded and inserted when group <n> is set
+ or unset, respectively. The first form is just a convenient shorthand
for
${<n>:+${<n>}:<string>}
- Backslash can be used to escape colons and closing curly brackets in
- the replacement strings. A change of the case forcing state within a
- replacement string remains in force afterwards, as shown in this
+ Backslash can be used to escape colons and closing curly brackets in
+ the replacement strings. A change of the case forcing state within a
+ replacement string remains in force afterwards, as shown in this
pcre2test example:
/(some)?(body)/substitute_extended,replace=${1:+\U:\L}HeLLo
@@ -3257,16 +3264,16 @@
somebody
1: HELLO
- The PCRE2_SUBSTITUTE_UNSET_EMPTY option does not affect these extended
- substitutions. However, PCRE2_SUBSTITUTE_UNKNOWN_UNSET does cause
+ The PCRE2_SUBSTITUTE_UNSET_EMPTY option does not affect these extended
+ substitutions. However, PCRE2_SUBSTITUTE_UNKNOWN_UNSET does cause
unknown groups in the extended syntax forms to be treated as unset.
- If successful, pcre2_substitute() returns the number of replacements
+ If successful, pcre2_substitute() returns the number of replacements
that were made. This may be zero if no matches were found, and is never
greater than 1 unless PCRE2_SUBSTITUTE_GLOBAL is set.
In the event of an error, a negative error code is returned. Except for
- PCRE2_ERROR_NOMATCH (which is never returned), errors from
+ PCRE2_ERROR_NOMATCH (which is never returned), errors from
pcre2_match() are passed straight back.
PCRE2_ERROR_NOSUBSTRING is returned for a non-existent substring inser-
@@ -3273,26 +3280,26 @@
tion, unless PCRE2_SUBSTITUTE_UNKNOWN_UNSET is set.
PCRE2_ERROR_UNSET is returned for an unset substring insertion (includ-
- ing an unknown substring when PCRE2_SUBSTITUTE_UNKNOWN_UNSET is set)
+ ing an unknown substring when PCRE2_SUBSTITUTE_UNKNOWN_UNSET is set)
when the simple (non-extended) syntax is used and PCRE2_SUBSTI-
TUTE_UNSET_EMPTY is not set.
- PCRE2_ERROR_NOMEMORY is returned if the output buffer is not big
+ PCRE2_ERROR_NOMEMORY is returned if the output buffer is not big
enough. If the PCRE2_SUBSTITUTE_OVERFLOW_LENGTH option is set, the size
- of buffer that is needed is returned via outlengthptr. Note that this
+ of buffer that is needed is returned via outlengthptr. Note that this
does not happen by default.
- PCRE2_ERROR_BADREPLACEMENT is used for miscellaneous syntax errors in
+ PCRE2_ERROR_BADREPLACEMENT is used for miscellaneous syntax errors in
the replacement string, with more particular errors being
- PCRE2_ERROR_BADREPESCAPE (invalid escape sequence), PCRE2_ERROR_REP-
- MISSINGBRACE (closing curly bracket not found), PCRE2_ERROR_BADSUBSTI-
+ PCRE2_ERROR_BADREPESCAPE (invalid escape sequence), PCRE2_ERROR_REP-
+ MISSINGBRACE (closing curly bracket not found), PCRE2_ERROR_BADSUBSTI-
TUTION (syntax error in extended group substitution), and
- PCRE2_ERROR_BADSUBSPATTERN (the pattern match ended before it started
- or the match started earlier than the current position in the subject,
+ PCRE2_ERROR_BADSUBSPATTERN (the pattern match ended before it started
+ or the match started earlier than the current position in the subject,
which can happen if \K is used in an assertion).
As for all PCRE2 errors, a text message that describes the error can be
- obtained by calling the pcre2_get_error_message() function (see
+ obtained by calling the pcre2_get_error_message() function (see
"Obtaining a textual error message" above).
@@ -3301,56 +3308,56 @@
int pcre2_substring_nametable_scan(const pcre2_code *code,
PCRE2_SPTR name, PCRE2_SPTR *first, PCRE2_SPTR *last);
- When a pattern is compiled with the PCRE2_DUPNAMES option, names for
- subpatterns are not required to be unique. Duplicate names are always
- allowed for subpatterns with the same number, created by using the (?|
- feature. Indeed, if such subpatterns are named, they are required to
+ When a pattern is compiled with the PCRE2_DUPNAMES option, names for
+ subpatterns are not required to be unique. Duplicate names are always
+ allowed for subpatterns with the same number, created by using the (?|
+ feature. Indeed, if such subpatterns are named, they are required to
use the same names.
Normally, patterns with duplicate names are such that in any one match,
- only one of the named subpatterns participates. An example is shown in
+ only one of the named subpatterns participates. An example is shown in
the pcre2pattern documentation.
- When duplicates are present, pcre2_substring_copy_byname() and
- pcre2_substring_get_byname() return the first substring corresponding
- to the given name that is set. Only if none are set is
- PCRE2_ERROR_UNSET is returned. The pcre2_substring_number_from_name()
+ When duplicates are present, pcre2_substring_copy_byname() and
+ pcre2_substring_get_byname() return the first substring corresponding
+ to the given name that is set. Only if none are set is
+ PCRE2_ERROR_UNSET is returned. The pcre2_substring_number_from_name()
function returns the error PCRE2_ERROR_NOUNIQUESUBSTRING when there are
duplicate names.
- If you want to get full details of all captured substrings for a given
- name, you must use the pcre2_substring_nametable_scan() function. The
- first argument is the compiled pattern, and the second is the name. If
- the third and fourth arguments are NULL, the function returns a group
+ If you want to get full details of all captured substrings for a given
+ name, you must use the pcre2_substring_nametable_scan() function. The
+ first argument is the compiled pattern, and the second is the name. If
+ the third and fourth arguments are NULL, the function returns a group
number for a unique name, or PCRE2_ERROR_NOUNIQUESUBSTRING otherwise.
When the third and fourth arguments are not NULL, they must be pointers
- to variables that are updated by the function. After it has run, they
+ to variables that are updated by the function. After it has run, they
point to the first and last entries in the name-to-number table for the
- given name, and the function returns the length of each entry in code
- units. In both cases, PCRE2_ERROR_NOSUBSTRING is returned if there are
+ given name, and the function returns the length of each entry in code
+ units. In both cases, PCRE2_ERROR_NOSUBSTRING is returned if there are
no entries for the given name.
The format of the name table is described above in the section entitled
- Information about a pattern. Given all the relevant entries for the
- name, you can extract each of their numbers, and hence the captured
+ Information about a pattern. Given all the relevant entries for the
+ name, you can extract each of their numbers, and hence the captured
data.
FINDING ALL POSSIBLE MATCHES AT ONE POSITION
- The traditional matching function uses a similar algorithm to Perl,
- which stops when it finds the first match at a given point in the sub-
+ The traditional matching function uses a similar algorithm to Perl,
+ which stops when it finds the first match at a given point in the sub-
ject. If you want to find all possible matches, or the longest possible
- match at a given position, consider using the alternative matching
- function (see below) instead. If you cannot use the alternative func-
+ match at a given position, consider using the alternative matching
+ function (see below) instead. If you cannot use the alternative func-
tion, you can kludge it up by making use of the callout facility, which
is described in the pcre2callout documentation.
What you have to do is to insert a callout right at the end of the pat-
- tern. When your callout function is called, extract and save the cur-
- rent matched substring. Then return 1, which forces pcre2_match() to
- backtrack and try other alternatives. Ultimately, when it runs out of
+ tern. When your callout function is called, extract and save the cur-
+ rent matched substring. Then return 1, which forces pcre2_match() to
+ backtrack and try other alternatives. Ultimately, when it runs out of
matches, pcre2_match() will yield PCRE2_ERROR_NOMATCH.
@@ -3362,26 +3369,26 @@
pcre2_match_context *mcontext,
int *workspace, PCRE2_SIZE wscount);
- The function pcre2_dfa_match() is called to match a subject string
- against a compiled pattern, using a matching algorithm that scans the
+ The function pcre2_dfa_match() is called to match a subject string
+ against a compiled pattern, using a matching algorithm that scans the
subject string just once (not counting lookaround assertions), and does
- not backtrack. This has different characteristics to the normal algo-
- rithm, and is not compatible with Perl. Some of the features of PCRE2
- patterns are not supported. Nevertheless, there are times when this
- kind of matching can be useful. For a discussion of the two matching
+ not backtrack. This has different characteristics to the normal algo-
+ rithm, and is not compatible with Perl. Some of the features of PCRE2
+ patterns are not supported. Nevertheless, there are times when this
+ kind of matching can be useful. For a discussion of the two matching
algorithms, and a list of features that pcre2_dfa_match() does not sup-
port, see the pcre2matching documentation.
- The arguments for the pcre2_dfa_match() function are the same as for
+ The arguments for the pcre2_dfa_match() function are the same as for
pcre2_match(), plus two extras. The ovector within the match data block
is used in a different way, and this is described below. The other com-
- mon arguments are used in the same way as for pcre2_match(), so their
+ mon arguments are used in the same way as for pcre2_match(), so their
description is not repeated here.
- The two additional arguments provide workspace for the function. The
- workspace vector should contain at least 20 elements. It is used for
+ The two additional arguments provide workspace for the function. The
+ workspace vector should contain at least 20 elements. It is used for
keeping track of multiple paths through the pattern tree. More
- workspace is needed for patterns and subjects where there are a lot of
+ workspace is needed for patterns and subjects where there are a lot of
potential matches.
Here is an example of a simple call to pcre2_dfa_match():
@@ -3401,45 +3408,45 @@
Option bits for pcre_dfa_match()
- The unused bits of the options argument for pcre2_dfa_match() must be
- zero. The only bits that may be set are PCRE2_ANCHORED, PCRE2_ENDAN-
- CHORED, PCRE2_NOTBOL, PCRE2_NOTEOL, PCRE2_NOTEMPTY,
+ The unused bits of the options argument for pcre2_dfa_match() must be
+ zero. The only bits that may be set are PCRE2_ANCHORED, PCRE2_ENDAN-
+ CHORED, PCRE2_NOTBOL, PCRE2_NOTEOL, PCRE2_NOTEMPTY,
PCRE2_NOTEMPTY_ATSTART, PCRE2_NO_UTF_CHECK, PCRE2_PARTIAL_HARD,
- PCRE2_PARTIAL_SOFT, PCRE2_DFA_SHORTEST, and PCRE2_DFA_RESTART. All but
- the last four of these are exactly the same as for pcre2_match(), so
+ PCRE2_PARTIAL_SOFT, PCRE2_DFA_SHORTEST, and PCRE2_DFA_RESTART. All but
+ the last four of these are exactly the same as for pcre2_match(), so
their description is not repeated here.
PCRE2_PARTIAL_HARD
PCRE2_PARTIAL_SOFT
- These have the same general effect as they do for pcre2_match(), but
- the details are slightly different. When PCRE2_PARTIAL_HARD is set for
- pcre2_dfa_match(), it returns PCRE2_ERROR_PARTIAL if the end of the
+ These have the same general effect as they do for pcre2_match(), but
+ the details are slightly different. When PCRE2_PARTIAL_HARD is set for
+ pcre2_dfa_match(), it returns PCRE2_ERROR_PARTIAL if the end of the
subject is reached and there is still at least one matching possibility
that requires additional characters. This happens even if some complete
- matches have already been found. When PCRE2_PARTIAL_SOFT is set, the
- return code PCRE2_ERROR_NOMATCH is converted into PCRE2_ERROR_PARTIAL
- if the end of the subject is reached, there have been no complete
+ matches have already been found. When PCRE2_PARTIAL_SOFT is set, the
+ return code PCRE2_ERROR_NOMATCH is converted into PCRE2_ERROR_PARTIAL
+ if the end of the subject is reached, there have been no complete
matches, but there is still at least one matching possibility. The por-
- tion of the string that was inspected when the longest partial match
+ tion of the string that was inspected when the longest partial match
was found is set as the first matching string in both cases. There is a
- more detailed discussion of partial and multi-segment matching, with
+ more detailed discussion of partial and multi-segment matching, with
examples, in the pcre2partial documentation.
PCRE2_DFA_SHORTEST
- Setting the PCRE2_DFA_SHORTEST option causes the matching algorithm to
+ Setting the PCRE2_DFA_SHORTEST option causes the matching algorithm to
stop as soon as it has found one match. Because of the way the alterna-
- tive algorithm works, this is necessarily the shortest possible match
+ tive algorithm works, this is necessarily the shortest possible match
at the first possible matching point in the subject string.
PCRE2_DFA_RESTART
- When pcre2_dfa_match() returns a partial match, it is possible to call
+ When pcre2_dfa_match() returns a partial match, it is possible to call
it again, with additional subject characters, and have it continue with
the same match. The PCRE2_DFA_RESTART option requests this action; when
- it is set, the workspace and wscount options must reference the same
- vector as before because data about the match so far is left in them
+ it is set, the workspace and wscount options must reference the same
+ vector as before because data about the match so far is left in them
after a partial match. There is more discussion of this facility in the
pcre2partial documentation.
@@ -3447,8 +3454,8 @@
When pcre2_dfa_match() succeeds, it may have matched more than one sub-
string in the subject. Note, however, that all the matches from one run
- of the function start at the same point in the subject. The shorter
- matches are all initial substrings of the longer matches. For example,
+ of the function start at the same point in the subject. The shorter
+ matches are all initial substrings of the longer matches. For example,
if the pattern
<.*>
@@ -3463,73 +3470,73 @@
<something> <something else>
<something>
- On success, the yield of the function is a number greater than zero,
- which is the number of matched substrings. The offsets of the sub-
- strings are returned in the ovector, and can be extracted by number in
- the same way as for pcre2_match(), but the numbers bear no relation to
- any capturing groups that may exist in the pattern, because DFA match-
+ On success, the yield of the function is a number greater than zero,
+ which is the number of matched substrings. The offsets of the sub-
+ strings are returned in the ovector, and can be extracted by number in
+ the same way as for pcre2_match(), but the numbers bear no relation to
+ any capturing groups that may exist in the pattern, because DFA match-
ing does not support group capture.
- Calls to the convenience functions that extract substrings by name
- return the error PCRE2_ERROR_DFA_UFUNC (unsupported function) if used
+ Calls to the convenience functions that extract substrings by name
+ return the error PCRE2_ERROR_DFA_UFUNC (unsupported function) if used
after a DFA match. The convenience functions that extract substrings by
number never return PCRE2_ERROR_NOSUBSTRING.
- The matched strings are stored in the ovector in reverse order of
- length; that is, the longest matching string is first. If there were
- too many matches to fit into the ovector, the yield of the function is
+ The matched strings are stored in the ovector in reverse order of
+ length; that is, the longest matching string is first. If there were
+ too many matches to fit into the ovector, the yield of the function is
zero, and the vector is filled with the longest matches.
- NOTE: PCRE2's "auto-possessification" optimization usually applies to
- character repeats at the end of a pattern (as well as internally). For
- example, the pattern "a\d+" is compiled as if it were "a\d++". For DFA
- matching, this means that only one possible match is found. If you
- really do want multiple matches in such cases, either use an ungreedy
- repeat such as "a\d+?" or set the PCRE2_NO_AUTO_POSSESS option when
+ NOTE: PCRE2's "auto-possessification" optimization usually applies to
+ character repeats at the end of a pattern (as well as internally). For
+ example, the pattern "a\d+" is compiled as if it were "a\d++". For DFA
+ matching, this means that only one possible match is found. If you
+ really do want multiple matches in such cases, either use an ungreedy
+ repeat such as "a\d+?" or set the PCRE2_NO_AUTO_POSSESS option when
compiling.
Error returns from pcre2_dfa_match()
The pcre2_dfa_match() function returns a negative number when it fails.
- Many of the errors are the same as for pcre2_match(), as described
+ Many of the errors are the same as for pcre2_match(), as described
above. There are in addition the following errors that are specific to
pcre2_dfa_match():
PCRE2_ERROR_DFA_UITEM
- This return is given if pcre2_dfa_match() encounters an item in the
- pattern that it does not support, for instance, the use of \C in a UTF
+ This return is given if pcre2_dfa_match() encounters an item in the
+ pattern that it does not support, for instance, the use of \C in a UTF
mode or a backreference.
PCRE2_ERROR_DFA_UCOND
- This return is given if pcre2_dfa_match() encounters a condition item
+ This return is given if pcre2_dfa_match() encounters a condition item
that uses a backreference for the condition, or a test for recursion in
a specific group. These are not supported.
PCRE2_ERROR_DFA_WSSIZE
- This return is given if pcre2_dfa_match() runs out of space in the
+ This return is given if pcre2_dfa_match() runs out of space in the
workspace vector.
PCRE2_ERROR_DFA_RECURSE
- When a recursive subpattern is processed, the matching function calls
+ When a recursive subpattern is processed, the matching function calls
itself recursively, using private memory for the ovector and workspace.
- This error is given if the internal ovector is not large enough. This
+ This error is given if the internal ovector is not large enough. This
should be extremely rare, as a vector of size 1000 is used.
PCRE2_ERROR_DFA_BADRESTART
- When pcre2_dfa_match() is called with the PCRE2_DFA_RESTART option,
- some plausibility checks are made on the contents of the workspace,
- which should contain data about the previous partial match. If any of
+ When pcre2_dfa_match() is called with the PCRE2_DFA_RESTART option,
+ some plausibility checks are made on the contents of the workspace,
+ which should contain data about the previous partial match. If any of
these checks fail, this error is given.
SEE ALSO
- pcre2build(3), pcre2callout(3), pcre2demo(3), pcre2matching(3),
+ pcre2build(3), pcre2callout(3), pcre2demo(3), pcre2matching(3),
pcre2partial(3), pcre2posix(3), pcre2sample(3), pcre2unicode(3).
@@ -3542,7 +3549,7 @@
REVISION
- Last updated: 03 August 2018
+ Last updated: 07 September 2018
Copyright (c) 1997-2018 University of Cambridge.
------------------------------------------------------------------------------
@@ -6192,14 +6199,16 @@
\ddd character with octal code ddd, or backreference
\o{ddd..} character with octal code ddd..
\xhh character with hex code hh
- \x{hhh..} character with hex code hhh.. (default mode)
- \N{U+hhh..} character with Unicode code point hhh..
+ \x{hhh..} character with hex code hhh..
+ \N{U+hhh..} character with Unicode hex code point hhh..
\uhhhh character with hex code hhhh (when PCRE2_ALT_BSUX is set)
- Note that when \N is not followed by an opening brace (curly bracket)
- it has an entirely different meaning, matching any character that is
- not a newline. Perl also uses \N{name} to specify characters by Uni-
- code name; PCRE2 does not support this.
+ The \N{U+hhh..} escape sequence is recognized only when the PCRE2_UTF
+ option is set, that is, when PCRE2 is operating in a Unicode mode. Perl
+ also uses \N{name} to specify characters by Unicode name; PCRE2 does
+ not support this. Note that when \N is not followed by an opening
+ brace (curly bracket) it has an entirely different meaning, matching
+ any character that is not a newline.
The precise effect of \cx on ASCII characters is as follows: if x is a
lower case letter, it is converted to upper case. Then bit 6 of the
@@ -6314,7 +6323,9 @@
Invalid Unicode code points are all those in the range 0xd800 to 0xdfff
(the so-called "surrogate" code points). The check for these can be
disabled by the caller of pcre2_compile() by setting the option
- PCRE2_EXTRA_ALLOW_SURROGATE_ESCAPES.
+ PCRE2_EXTRA_ALLOW_SURROGATE_ESCAPES. However, this is possible only in
+ UTF-8 and UTF-32 modes, because these values are not representable in
+ UTF-16.
Escape sequences in character classes
@@ -9074,17 +9085,20 @@
(*FAIL) in a subpattern called as a subroutine has its normal effect:
it forces an immediate backtrack.
- (*COMMIT), (*SKIP), and (*PRUNE) in a subpattern called as a subroutine
- cause the subroutine match to fail.
+ (*COMMIT), (*SKIP), and (*PRUNE) cause the subroutine match to fail
+ when triggered by being backtracked to in a subpattern called as a sub-
+ routine. There is then a backtrack at the outer level.
- (*THEN) skips to the next alternative in the innermost enclosing group
- within the subpattern that has alternatives. If there is no such group
- within the subpattern, (*THEN) causes the subroutine match to fail.
+ (*THEN), when triggered, skips to the next alternative in the innermost
+ enclosing group within the subpattern that has alternatives (its normal
+ behaviour). However, if there is no such group within the subroutine
+ subpattern, the subroutine match fails and there is a backtrack at the
+ outer level.
SEE ALSO
- pcre2api(3), pcre2callout(3), pcre2matching(3), pcre2syntax(3),
+ pcre2api(3), pcre2callout(3), pcre2matching(3), pcre2syntax(3),
pcre2(3).
@@ -9097,7 +9111,7 @@
REVISION
- Last updated: 03 August 2018
+ Last updated: 04 September 2018
Copyright (c) 1997-2018 University of Cambridge.
------------------------------------------------------------------------------
@@ -9958,7 +9972,7 @@
\ddd character with octal code ddd, or backreference
\o{ddd..} character with octal code ddd..
\U "U" if PCRE2_ALT_BSUX is set (otherwise is an error)
- \N{U+hh..} character with Unicode code point hh..
+ \N{U+hh..} character with Unicode code point hh.. (Unicode mode only)
\uhhhh character with hex code hhhh (if PCRE2_ALT_BSUX is set)
\xhh character with hex code hh
\x{hh..} character with hex code hh..
@@ -10387,7 +10401,7 @@
REVISION
- Last updated: 01 August 2018
+ Last updated: 02 September 2018
Copyright (c) 1997-2018 University of Cambridge.
------------------------------------------------------------------------------
@@ -10410,7 +10424,9 @@
PCRE2_UTF option flag, or the pattern must start with the sequence
(*UTF). When either of these is the case, both the pattern and any sub-
ject strings that are matched against it are treated as UTF strings
- instead of strings of individual one-code-unit characters.
+ instead of strings of individual one-code-unit characters. There are
+ also some other changes to the way characters are handled, as docu-
+ mented below.
If you do not need Unicode support you can build PCRE2 without it, in
which case the library will be smaller.
@@ -10437,6 +10453,10 @@
Larger values have to use braced sequences. Unbraced octal code points
up to \777 are also recognized; larger ones can be coded using \o{...}.
+ The escape sequence \N{U+<hex digits>} is recognized as another way of
+ specifying a Unicode character by code point in a UTF mode. It is not
+ allowed in non-UTF modes.
+
In UTF modes, repeat quantifiers apply to complete UTF characters, not
to individual code units.
@@ -10644,8 +10664,8 @@
REVISION
- Last updated: 17 May 2017
- Copyright (c) 1997-2017 University of Cambridge.
+ Last updated: 02 September 2018
+ Copyright (c) 1997-2018 University of Cambridge.
------------------------------------------------------------------------------
Modified: code/trunk/doc/pcre2api.3
===================================================================
--- code/trunk/doc/pcre2api.3 2018-09-10 17:34:19 UTC (rev 1000)
+++ code/trunk/doc/pcre2api.3 2018-09-11 14:27:39 UTC (rev 1001)
@@ -1756,7 +1756,7 @@
.\" HREF
\fBpcre2unicode\fP
.\"
-page. In particular, note that it changes the way PCRE2_CASELESS handles
+page. In particular, note that it changes the way PCRE2_CASELESS handles
characters with code points greater than 127.
.
.
@@ -3200,9 +3200,9 @@
functions from the match context, if provided, or else those that were used to
allocate memory for the compiled code.
.P
-If an external \fImatch_data\fP block is provided, its contents afterwards
+If an external \fImatch_data\fP block is provided, its contents afterwards
are those set by the final call to \fBpcre2_match()\fP, which will have
-ended in a matching error. The contents of the ovector within the match data
+ended in a matching error. The contents of the ovector within the match data
block may or may not have been changed.
.P
The \fIoutlengthptr\fP argument must point to a variable that contains the
Modified: code/trunk/doc/pcre2pattern.3
===================================================================
--- code/trunk/doc/pcre2pattern.3 2018-09-10 17:34:19 UTC (rev 1000)
+++ code/trunk/doc/pcre2pattern.3 2018-09-11 14:27:39 UTC (rev 1001)
@@ -3630,7 +3630,7 @@
(*THEN), when triggered, skips to the next alternative in the innermost
enclosing group within the subpattern that has alternatives (its normal
behaviour). However, if there is no such group within the subroutine
-subpattern, the subroutine match fails and there is a backtrack at the outer
+subpattern, the subroutine match fails and there is a backtrack at the outer
level.
.
.
Modified: code/trunk/doc/pcre2unicode.3
===================================================================
--- code/trunk/doc/pcre2unicode.3 2018-09-10 17:34:19 UTC (rev 1000)
+++ code/trunk/doc/pcre2unicode.3 2018-09-11 14:27:39 UTC (rev 1001)
@@ -53,7 +53,7 @@
also recognized; larger ones can be coded using \eo{...}.
.P
The escape sequence \eN{U+<hex digits>} is recognized as another way of
-specifying a Unicode character by code point in a UTF mode. It is not allowed
+specifying a Unicode character by code point in a UTF mode. It is not allowed
in non-UTF modes.
.P
In UTF modes, repeat quantifiers apply to complete UTF characters, not to
Modified: code/trunk/src/config.h.generic
===================================================================
--- code/trunk/src/config.h.generic 2018-09-10 17:34:19 UTC (rev 1000)
+++ code/trunk/src/config.h.generic 2018-09-11 14:27:39 UTC (rev 1001)
@@ -214,7 +214,7 @@
#define PACKAGE_NAME "PCRE2"
/* Define to the full name and version of this package. */
-#define PACKAGE_STRING "PCRE2 10.32-RC1"
+#define PACKAGE_STRING "PCRE2 10.32"
/* Define to the one symbol short name of this package. */
#define PACKAGE_TARNAME "pcre2"
@@ -223,7 +223,7 @@
#define PACKAGE_URL ""
/* Define to the version of this package. */
-#define PACKAGE_VERSION "10.32-RC1"
+#define PACKAGE_VERSION "10.32"
/* The value of PARENS_NEST_LIMIT specifies the maximum depth of nested
parentheses (of any kind) in a pattern. This limits the amount of system
@@ -343,7 +343,7 @@
#endif
/* Version number of package */
-#define VERSION "10.32-RC1"
+#define VERSION "10.32"
/* Define to 1 if on MINIX. */
/* #undef _MINIX */
Modified: code/trunk/src/pcre2.h.generic
===================================================================
--- code/trunk/src/pcre2.h.generic 2018-09-10 17:34:19 UTC (rev 1000)
+++ code/trunk/src/pcre2.h.generic 2018-09-11 14:27:39 UTC (rev 1001)
@@ -43,8 +43,8 @@
#define PCRE2_MAJOR 10
#define PCRE2_MINOR 32
-#define PCRE2_PRERELEASE -RC1
-#define PCRE2_DATE 2018-08-13
+#define PCRE2_PRERELEASE
+#define PCRE2_DATE 2018-09-10
/* For the benefit of systems without stdint.h, an alternative is to use
inttypes.h. The existence of these headers is checked by configure or CMake. */
@@ -316,7 +316,7 @@
#define PCRE2_ERROR_INTERNAL_BAD_CODE_IN_SKIP 190
#define PCRE2_ERROR_NO_SURROGATES_IN_UTF16 191
#define PCRE2_ERROR_BAD_LITERAL_OPTIONS 192
-#define PCRE2_ERROR_NOT_SUPPORTED_IN_EBCDIC 193
+#define PCRE2_ERROR_SUPPORTED_ONLY_IN_UNICODE 193
#define PCRE2_ERROR_INVALID_HYPHEN_IN_OPTIONS 194
