Revision: 806
http://www.exim.org/viewvc/pcre2?view=rev&revision=806
Author: ph10
Date: 2017-05-26 18:14:36 +0100 (Fri, 26 May 2017)
Log Message:
-----------
Implement PCRE2_NEWLINE_NUL.
Modified Paths:
--------------
code/trunk/CMakeLists.txt
code/trunk/ChangeLog
code/trunk/RunGrepTest
code/trunk/configure.ac
code/trunk/doc/html/pcre2_config.html
code/trunk/doc/html/pcre2_pattern_info.html
code/trunk/doc/html/pcre2_set_newline.html
code/trunk/doc/html/pcre2api.html
code/trunk/doc/html/pcre2grep.html
code/trunk/doc/html/pcre2pattern.html
code/trunk/doc/html/pcre2syntax.html
code/trunk/doc/html/pcre2test.html
code/trunk/doc/pcre2.txt
code/trunk/doc/pcre2_config.3
code/trunk/doc/pcre2_pattern_info.3
code/trunk/doc/pcre2_set_newline.3
code/trunk/doc/pcre2api.3
code/trunk/doc/pcre2grep.1
code/trunk/doc/pcre2grep.txt
code/trunk/doc/pcre2pattern.3
code/trunk/doc/pcre2syntax.3
code/trunk/doc/pcre2test.1
code/trunk/doc/pcre2test.txt
code/trunk/src/config.h.in
code/trunk/src/pcre2.h
code/trunk/src/pcre2.h.in
code/trunk/src/pcre2_compile.c
code/trunk/src/pcre2_context.c
code/trunk/src/pcre2_convert.c
code/trunk/src/pcre2_dfa_match.c
code/trunk/src/pcre2_error.c
code/trunk/src/pcre2_internal.h
code/trunk/src/pcre2_match.c
code/trunk/src/pcre2grep.c
code/trunk/src/pcre2test.c
code/trunk/testdata/grepoutputN
code/trunk/testdata/testinput2
code/trunk/testdata/testinput6
code/trunk/testdata/testoutput2
code/trunk/testdata/testoutput6
Modified: code/trunk/CMakeLists.txt
===================================================================
--- code/trunk/CMakeLists.txt 2017-05-25 16:34:22 UTC (rev 805)
+++ code/trunk/CMakeLists.txt 2017-05-26 17:14:36 UTC (rev 806)
@@ -160,7 +160,7 @@
"Buffer maximum size parameter for pcre2grep. See PCRE2GREP_MAX_BUFSIZE in config.h.in for details.")
SET(PCRE2_NEWLINE "LF" CACHE STRING
- "What to recognize as a newline (one of CR, LF, CRLF, ANY, ANYCRLF).")
+ "What to recognize as a newline (one of CR, LF, CRLF, ANY, ANYCRLF, NUL).")
SET(PCRE2_HEAP_MATCH_RECURSE OFF CACHE BOOL
"Obsolete option: do not use")
@@ -344,6 +344,9 @@
IF(PCRE2_NEWLINE STREQUAL "ANYCRLF")
SET(NEWLINE_DEFAULT "5")
ENDIF(PCRE2_NEWLINE STREQUAL "ANYCRLF")
+IF(PCRE2_NEWLINE STREQUAL "NUL")
+ SET(NEWLINE_DEFAULT "6")
+ENDIF(PCRE2_NEWLINE STREQUAL "NUL")
IF(NEWLINE_DEFAULT STREQUAL "")
MESSAGE(FATAL_ERROR "The PCRE2_NEWLINE variable must be set to one of the following values: \"LF\", \"CR\", \"CRLF\", \"ANY\", \"ANYCRLF\".")
Modified: code/trunk/ChangeLog
===================================================================
--- code/trunk/ChangeLog 2017-05-25 16:34:22 UTC (rev 805)
+++ code/trunk/ChangeLog 2017-05-26 17:14:36 UTC (rev 806)
@@ -169,6 +169,7 @@
33. Implement extra compile options in the compile context and add the first
one: PCRE2_EXTRA_ALLOW_SURROGATE_ESCAPES.
+34. Implement newline type PCRE2_NEWLINE_NUL.
Version 10.23 14-February-2017
Modified: code/trunk/RunGrepTest
===================================================================
--- code/trunk/RunGrepTest 2017-05-25 16:34:22 UTC (rev 805)
+++ code/trunk/RunGrepTest 2017-05-26 17:14:36 UTC (rev 806)
@@ -662,6 +662,11 @@
printf "%c--------------------------- Test N6 ------------------------------\r\n" - >>testtrygrep
$valgrind $vjs $pcre2grep -n --newline=anycrlf "^(abc|def|ghi|jkl)" testNinputgrep >>testtrygrep
+printf "abc\0def" >testNinputgrep
+
+printf "%c--------------------------- Test N7 ------------------------------\r\n" - >>testtrygrep
+$valgrind $vjs $pcre2grep -na --newline=nul "^(abc|def)" testNinputgrep | sed 's/\x00/ZERO/' >>testtrygrep
+
$cf $srcdir/testdata/grepoutputN testtrygrep
if [ $? != 0 ] ; then exit 1; fi
Modified: code/trunk/configure.ac
===================================================================
--- code/trunk/configure.ac 2017-05-25 16:34:22 UTC (rev 805)
+++ code/trunk/configure.ac 2017-05-26 17:14:36 UTC (rev 806)
@@ -189,6 +189,10 @@
AS_HELP_STRING([--enable-newline-is-any],
[use any valid Unicode newline sequence]),
ac_pcre2_newline=any)
+AC_ARG_ENABLE(newline-is-nul,
+ AS_HELP_STRING([--enable-newline-is-nul],
+ [use NUL (binary zero) as newline character]),
+ ac_pcre2_newline=nul)
enable_newline="$ac_pcre2_newline"
# Handle --enable-bsr-anycrlf
@@ -360,6 +364,7 @@
crlf) ac_pcre2_newline_value=3 ;;
any) ac_pcre2_newline_value=4 ;;
anycrlf) ac_pcre2_newline_value=5 ;;
+ nul) ac_pcre2_newline_value=6 ;;
*)
AC_MSG_ERROR([invalid argument \"$enable_newline\" to --enable-newline option])
;;
@@ -658,7 +663,7 @@
The value of NEWLINE_DEFAULT determines the default newline character
sequence. PCRE2 client programs can override this by selecting other values
at run time. The valid values are 1 (CR), 2 (LF), 3 (CRLF), 4 (ANY),
- and 5 (ANYCRLF).])
+ 5 (ANYCRLF), and 6 (NUL).])
if test "$enable_bsr_anycrlf" = "yes"; then
AC_DEFINE([BSR_ANYCRLF], [], [
Modified: code/trunk/doc/html/pcre2_config.html
===================================================================
--- code/trunk/doc/html/pcre2_config.html 2017-05-25 16:34:22 UTC (rev 805)
+++ code/trunk/doc/html/pcre2_config.html 2017-05-26 17:14:36 UTC (rev 806)
@@ -57,6 +57,7 @@
PCRE2_NEWLINE_CRLF
PCRE2_NEWLINE_ANY
PCRE2_NEWLINE_ANYCRLF
+ PCRE2_NEWLINE_NUL
PCRE2_CONFIG_PARENSLIMIT Default parentheses nesting limit
PCRE2_CONFIG_RECURSIONLIMIT Obsolete: use PCRE2_CONFIG_DEPTHLIMIT
PCRE2_CONFIG_STACKRECURSE Obsolete: always returns 0
Modified: code/trunk/doc/html/pcre2_pattern_info.html
===================================================================
--- code/trunk/doc/html/pcre2_pattern_info.html 2017-05-25 16:34:22 UTC (rev 805)
+++ code/trunk/doc/html/pcre2_pattern_info.html 2017-05-26 17:14:36 UTC (rev 806)
@@ -71,6 +71,7 @@
PCRE2_NEWLINE_CRLF
PCRE2_NEWLINE_ANY
PCRE2_NEWLINE_ANYCRLF
+ PCRE2_NEWLINE_NUL
PCRE2_INFO_RECURSIONLIMIT Obsolete synonym for PCRE2_INFO_DEPTHLIMIT
PCRE2_INFO_SIZE Size of compiled pattern
</pre>
Modified: code/trunk/doc/html/pcre2_set_newline.html
===================================================================
--- code/trunk/doc/html/pcre2_set_newline.html 2017-05-25 16:34:22 UTC (rev 805)
+++ code/trunk/doc/html/pcre2_set_newline.html 2017-05-26 17:14:36 UTC (rev 806)
@@ -35,6 +35,7 @@
PCRE2_NEWLINE_CRLF CR followed by LF only
PCRE2_NEWLINE_ANYCRLF Any of the above
PCRE2_NEWLINE_ANY Any Unicode newline sequence
+ PCRE2_NEWLINE_NUL The NUL character (binary zero)
</pre>
The result is zero for success or PCRE2_ERROR_BADDATA if the second argument is
invalid.
Modified: code/trunk/doc/html/pcre2api.html
===================================================================
--- code/trunk/doc/html/pcre2api.html 2017-05-25 16:34:22 UTC (rev 805)
+++ code/trunk/doc/html/pcre2api.html 2017-05-26 17:14:36 UTC (rev 806)
@@ -783,8 +783,9 @@
This specifies which characters or character sequences are to be recognized as
newlines. The value must be one of PCRE2_NEWLINE_CR (carriage return only),
PCRE2_NEWLINE_LF (linefeed only), PCRE2_NEWLINE_CRLF (the two-character
-sequence CR followed by LF), PCRE2_NEWLINE_ANYCRLF (any of the above), or
-PCRE2_NEWLINE_ANY (any Unicode newline sequence).
+sequence CR followed by LF), PCRE2_NEWLINE_ANYCRLF (any of the above),
+PCRE2_NEWLINE_ANY (any Unicode newline sequence), or PCRE2_NEWLINE_NUL (the
+NUL character, that is a binary zero).
</P>
<P>
A pattern can override the value set in the compile context by starting with a
@@ -1106,6 +1107,7 @@
PCRE2_NEWLINE_CRLF Carriage return, linefeed (CRLF)
PCRE2_NEWLINE_ANY Any Unicode line ending
PCRE2_NEWLINE_ANYCRLF Any of CR, LF, or CRLF
+ PCRE2_NEWLINE_NUL The NUL character (binary zero)
</pre>
The default should normally correspond to the standard sequence for your
operating system.
@@ -2121,6 +2123,7 @@
PCRE2_NEWLINE_CRLF Carriage return, linefeed (CRLF)
PCRE2_NEWLINE_ANY Any Unicode line ending
PCRE2_NEWLINE_ANYCRLF Any of CR, LF, or CRLF
+ PCRE2_NEWLINE_NUL The NUL character (binary zero)
</pre>
This identifies the character sequence that will be recognized as meaning
"newline" while matching.
@@ -3468,7 +3471,7 @@
</P>
<br><a name="SEC42" href="#TOC1">REVISION</a><br>
<P>
-Last updated: 17 May 2017
+Last updated: 26 May 2017
<br>
Copyright © 1997-2017 University of Cambridge.
<br>
Modified: code/trunk/doc/html/pcre2grep.html
===================================================================
--- code/trunk/doc/html/pcre2grep.html 2017-05-25 16:34:22 UTC (rev 805)
+++ code/trunk/doc/html/pcre2grep.html 2017-05-26 17:14:36 UTC (rev 806)
@@ -142,9 +142,11 @@
<br><a name="SEC4" href="#TOC1">BINARY FILES</a><br>
<P>
By default, a file that contains a binary zero byte within the first 1024 bytes
-is identified as a binary file, and is processed specially. (GNU grep also
-identifies binary files in this manner.) See the <b>--binary-files</b> option
-for a means of changing the way binary files are handled.
+is identified as a binary file, and is processed specially. (GNU grep
+identifies binary files in this manner.) However, if the newline type is
+specified as "nul", that is, the line terminator is a binary zero, the test for
+a binary file is not applied. See the <b>--binary-files</b> option for a means
+of changing the way binary files are handled.
</P>
<br><a name="SEC5" href="#TOC1">OPTIONS</a><br>
<P>
@@ -934,7 +936,7 @@
</P>
<br><a name="SEC15" href="#TOC1">REVISION</a><br>
<P>
-Last updated: 11 April 2017
+Last updated: 26 May 2017
<br>
Copyright © 1997-2017 University of Cambridge.
<br>
Modified: code/trunk/doc/html/pcre2pattern.html
===================================================================
--- code/trunk/doc/html/pcre2pattern.html 2017-05-25 16:34:22 UTC (rev 805)
+++ code/trunk/doc/html/pcre2pattern.html 2017-05-26 17:14:36 UTC (rev 806)
@@ -214,10 +214,10 @@
Newline conventions
</b><br>
<P>
-PCRE2 supports five different conventions for indicating line breaks in
+PCRE2 supports six different conventions for indicating line breaks in
strings: a single CR (carriage return) character, a single LF (linefeed)
-character, the two-character sequence CRLF, any of the three preceding, or any
-Unicode newline sequence. The
+character, the two-character sequence CRLF, any of the three preceding, any
+Unicode newline sequence, or the NUL character (binary zero). The
<a href="pcre2api.html"><b>pcre2api</b></a>
page has
<a href="pcre2api.html#newlines">further discussion</a>
@@ -226,7 +226,7 @@
</P>
<P>
It is also possible to specify a newline convention by starting a pattern
-string with one of the following five sequences:
+string with one of the following sequences:
<pre>
(*CR) carriage return
(*LF) linefeed
@@ -233,6 +233,7 @@
(*CRLF) carriage return, followed by linefeed
(*ANYCRLF) any of the three above
(*ANY) all Unicode newline sequences
+ (*NUL) the NUL character (binary zero)
</pre>
These override the default and the options given to the compiling function. For
example, on a Unix system where LF is the default newline sequence, the pattern
@@ -3444,7 +3445,7 @@
</P>
<br><a name="SEC30" href="#TOC1">REVISION</a><br>
<P>
-Last updated: 18 April 2017
+Last updated: 26 May 2017
<br>
Copyright © 1997-2017 University of Cambridge.
<br>
Modified: code/trunk/doc/html/pcre2syntax.html
===================================================================
--- code/trunk/doc/html/pcre2syntax.html 2017-05-25 16:34:22 UTC (rev 805)
+++ code/trunk/doc/html/pcre2syntax.html 2017-05-26 17:14:36 UTC (rev 806)
@@ -468,6 +468,7 @@
(*CRLF) carriage return followed by linefeed
(*ANYCRLF) all three of the above
(*ANY) any Unicode newline sequence
+ (*NUL) the NUL character (binary zero)
</PRE>
</P>
<br><a name="SEC18" href="#TOC1">WHAT \R MATCHES</a><br>
@@ -598,7 +599,7 @@
</P>
<br><a name="SEC27" href="#TOC1">REVISION</a><br>
<P>
-Last updated: 18 April 2017
+Last updated: 26 May 2017
<br>
Copyright © 1997-2017 University of Cambridge.
<br>
Modified: code/trunk/doc/html/pcre2test.html
===================================================================
--- code/trunk/doc/html/pcre2test.html 2017-05-25 16:34:22 UTC (rev 805)
+++ code/trunk/doc/html/pcre2test.html 2017-05-26 17:14:36 UTC (rev 806)
@@ -182,7 +182,7 @@
linksize the configured internal link size (2, 3, or 4)
exit code is set to the link size
newline the default newline setting:
- CR, LF, CRLF, ANYCRLF, or ANY
+ CR, LF, CRLF, ANYCRLF, ANY, or NUL
exit code is always 0
bsr the default setting for what \R matches:
ANYCRLF or ANY
@@ -367,8 +367,8 @@
</P>
<P>
The #newline_default command specifies a list of newline types that are
-acceptable as the default. The types must be one of CR, LF, CRLF, ANYCRLF, or
-ANY (in upper or lower case), for example:
+acceptable as the default. The types must be one of CR, LF, CRLF, ANYCRLF,
+ANY, or NUL (in upper or lower case), for example:
<pre>
#newline_default LF Any anyCRLF
</pre>
@@ -655,7 +655,7 @@
<P>
The <b>newline</b> modifier specifies which characters are to be interpreted as
newlines, both in the pattern and in subject lines. The type must be one of CR,
-LF, CRLF, ANYCRLF, or ANY (in upper or lower case).
+LF, CRLF, ANYCRLF, ANY, or NUL (in upper or lower case).
</P>
<br><b>
Information about a pattern
@@ -1816,7 +1816,7 @@
</P>
<br><a name="SEC21" href="#TOC1">REVISION</a><br>
<P>
-Last updated: 17 May 2017
+Last updated: 26 May 2017
<br>
Copyright © 1997-2017 University of Cambridge.
<br>
Modified: code/trunk/doc/pcre2.txt
===================================================================
--- code/trunk/doc/pcre2.txt 2017-05-25 16:34:22 UTC (rev 805)
+++ code/trunk/doc/pcre2.txt 2017-05-26 17:14:36 UTC (rev 806)
@@ -817,16 +817,17 @@
nized as newlines. The value must be one of PCRE2_NEWLINE_CR (carriage
return only), PCRE2_NEWLINE_LF (linefeed only), PCRE2_NEWLINE_CRLF (the
two-character sequence CR followed by LF), PCRE2_NEWLINE_ANYCRLF (any
- of the above), or PCRE2_NEWLINE_ANY (any Unicode newline sequence).
+ of the above), PCRE2_NEWLINE_ANY (any Unicode newline sequence), or
+ PCRE2_NEWLINE_NUL (the NUL character, that is a binary zero).
A pattern can override the value set in the compile context by starting
with a sequence such as (*CRLF). See the pcre2pattern page for details.
- When a pattern is compiled with the PCRE2_EXTENDED or
+ When a pattern is compiled with the PCRE2_EXTENDED or
PCRE2_EXTENDED_MORE option, the newline convention affects the recogni-
- tion of white space and the end of internal comments starting with #.
- The value is saved with the compiled pattern for subsequent use by the
- JIT compiler and by the two interpreted matching functions,
+ tion of white space and the end of internal comments starting with #.
+ The value is saved with the compiled pattern for subsequent use by the
+ JIT compiler and by the two interpreted matching functions,
pcre2_match() and pcre2_dfa_match().
int pcre2_set_parens_nest_limit(pcre2_compile_context *ccontext,
@@ -833,8 +834,8 @@
uint32_t value);
This parameter ajusts the limit, set when PCRE2 is built (default 250),
- on the depth of parenthesis nesting in a pattern. This limit stops
- rogue patterns using up too much system stack when being compiled. The
+ on the depth of parenthesis nesting in a pattern. This limit stops
+ rogue patterns using up too much system stack when being compiled. The
limit applies to parentheses of all kinds, not just capturing parenthe-
ses.
@@ -841,18 +842,18 @@
int pcre2_set_compile_recursion_guard(pcre2_compile_context *ccontext,
int (*guard_function)(uint32_t, void *), void *user_data);
- There is at least one application that runs PCRE2 in threads with very
- limited system stack, where running out of stack is to be avoided at
- all costs. The parenthesis limit above cannot take account of how much
- stack is actually available during compilation. For a finer control,
- you can supply a function that is called whenever pcre2_compile()
- starts to compile a parenthesized part of a pattern. This function can
- check the actual stack size (or anything else that it wants to, of
+ There is at least one application that runs PCRE2 in threads with very
+ limited system stack, where running out of stack is to be avoided at
+ all costs. The parenthesis limit above cannot take account of how much
+ stack is actually available during compilation. For a finer control,
+ you can supply a function that is called whenever pcre2_compile()
+ starts to compile a parenthesized part of a pattern. This function can
+ check the actual stack size (or anything else that it wants to, of
course).
- The first argument to the callout function gives the current depth of
- nesting, and the second is user data that is set up by the last argu-
- ment of pcre2_set_compile_recursion_guard(). The callout function
+ The first argument to the callout function gives the current depth of
+ nesting, and the second is user data that is set up by the last argu-
+ ment of pcre2_set_compile_recursion_guard(). The callout function
should return zero if all is well, or non-zero to force an error.
The match context
@@ -866,10 +867,10 @@
Change the backtracking depth limit
Set custom memory management specifically for the match
- If none of these apply, just pass NULL as the context argument of
+ If none of these apply, just pass NULL as the context argument of
pcre2_match(), pcre2_dfa_match(), or pcre2_jit_match().
- A match context is created, copied, and freed by the following func-
+ A match context is created, copied, and freed by the following func-
tions:
pcre2_match_context *pcre2_match_context_create(
@@ -880,7 +881,7 @@
void pcre2_match_context_free(pcre2_match_context *mcontext);
- A match context is created with default values for its parameters.
+ A match context is created with default values for its parameters.
These can be changed by calling the following functions, which return 0
on success, or PCRE2_ERROR_BADDATA if invalid data is detected.
@@ -895,39 +896,39 @@
int pcre2_set_offset_limit(pcre2_match_context *mcontext,
PCRE2_SIZE value);
- The offset_limit parameter limits how far an unanchored search can
- advance in the subject string. The default value is PCRE2_UNSET. The
- pcre2_match() and pcre2_dfa_match() functions return
- PCRE2_ERROR_NOMATCH if a match with a starting point before or at the
+ The offset_limit parameter limits how far an unanchored search can
+ advance in the subject string. The default value is PCRE2_UNSET. The
+ pcre2_match() and pcre2_dfa_match() functions return
+ PCRE2_ERROR_NOMATCH if a match with a starting point before or at the
given offset is not found. For example, if the pattern /abc/ is matched
- against "123abc" with an offset limit less than 3, the result is
- PCRE2_ERROR_NO_MATCH. A match can never be found if the startoffset
+ against "123abc" with an offset limit less than 3, the result is
+ PCRE2_ERROR_NO_MATCH. A match can never be found if the startoffset
argument of pcre2_match() or pcre2_dfa_match() is greater than the off-
set limit.
- When using this facility, you must set the PCRE2_USE_OFFSET_LIMIT
+ When using this facility, you must set the PCRE2_USE_OFFSET_LIMIT
option when calling pcre2_compile() so that when JIT is in use, differ-
- ent code can be compiled. If a match is started with a non-default
- match limit when PCRE2_USE_OFFSET_LIMIT is not set, an error is gener-
+ ent code can be compiled. If a match is started with a non-default
+ match limit when PCRE2_USE_OFFSET_LIMIT is not set, an error is gener-
ated.
- The offset limit facility can be used to track progress when searching
- large subject strings. See also the PCRE2_FIRSTLINE option, which
+ The offset limit facility can be used to track progress when searching
+ large subject strings. See also the PCRE2_FIRSTLINE option, which
requires a match to start within the first line of the subject. If this
- is set with an offset limit, a match must occur in the first line and
- also within the offset limit. In other words, whichever limit comes
+ is set with an offset limit, a match must occur in the first line and
+ also within the offset limit. In other words, whichever limit comes
first is used.
int pcre2_set_heap_limit(pcre2_match_context *mcontext,
uint32_t value);
- The heap_limit parameter specifies, in units of kilobytes, the maximum
- amount of heap memory that pcre2_match() may use to hold backtracking
- information when running an interpretive match. This limit does not
- apply to matching with the JIT optimization, which has its own memory
+ The heap_limit parameter specifies, in units of kilobytes, the maximum
+ amount of heap memory that pcre2_match() may use to hold backtracking
+ information when running an interpretive match. This limit does not
+ apply to matching with the JIT optimization, which has its own memory
control arrangements (see the pcre2jit documentation for more details),
- nor does it apply to pcre2_dfa_match(). If the limit is reached, the
- negative error code PCRE2_ERROR_HEAPLIMIT is returned. The default
+ nor does it apply to pcre2_dfa_match(). If the limit is reached, the
+ negative error code PCRE2_ERROR_HEAPLIMIT is returned. The default
limit is set when PCRE2 is built; the default default is very large and
is essentially "unlimited".
@@ -936,83 +937,83 @@
(*LIMIT_HEAP=ddd)
- where ddd is a decimal number. However, such a setting is ignored
- unless ddd is less than the limit set by the caller of pcre2_match()
+ where ddd is a decimal number. However, such a setting is ignored
+ unless ddd is less than the limit set by the caller of pcre2_match()
or, if no such limit is set, less than the default.
- The pcre2_match() function starts out using a 20K vector on the system
- stack for recording backtracking points. The more nested backtracking
+ The pcre2_match() function starts out using a 20K vector on the system
+ stack for recording backtracking points. The more nested backtracking
points there are (that is, the deeper the search tree), the more memory
- is needed. Heap memory is used only if the initial vector is too
+ is needed. Heap memory is used only if the initial vector is too
small. If the heap limit is set to a value less than 21 (in particular,
- zero) no heap memory will be used. In this case, only patterns that do
+ zero) no heap memory will be used. In this case, only patterns that do
not have a lot of nested backtracking can be successfully processed.
int pcre2_set_match_limit(pcre2_match_context *mcontext,
uint32_t value);
- The match_limit parameter provides a means of preventing PCRE2 from
+ The match_limit parameter provides a means of preventing PCRE2 from
using up too many computing resources when processing patterns that are
not going to match, but which have a very large number of possibilities
- in their search trees. The classic example is a pattern that uses
+ in their search trees. The classic example is a pattern that uses
nested unlimited repeats.
- There is an internal counter in pcre2_match() that is incremented each
- time round its main matching loop. If this value reaches the match
+ There is an internal counter in pcre2_match() that is incremented each
+ time round its main matching loop. If this value reaches the match
limit, pcre2_match() returns the negative value PCRE2_ERROR_MATCHLIMIT.
- This has the effect of limiting the amount of backtracking that can
+ This has the effect of limiting the amount of backtracking that can
take place. For patterns that are not anchored, the count restarts from
- zero for each position in the subject string. This limit is not rele-
+ zero for each position in the subject string. This limit is not rele-
vant to pcre2_dfa_match(), which ignores it.
- When pcre2_match() is called with a pattern that was successfully pro-
+ When pcre2_match() is called with a pattern that was successfully pro-
cessed by pcre2_jit_compile(), the way in which matching is executed is
- entirely different. However, there is still the possibility of runaway
- matching that goes on for a very long time, and so the match_limit
- value is also used in this case (but in a different way) to limit how
+ entirely different. However, there is still the possibility of runaway
+ matching that goes on for a very long time, and so the match_limit
+ value is also used in this case (but in a different way) to limit how
long the matching can continue.
- The default value for the limit can be set when PCRE2 is built; the
- default default is 10 million, which handles all but the most extreme
- cases. A value for the match limit may also be supplied by an item at
+ The default value for the limit can be set when PCRE2 is built; the
+ default default is 10 million, which handles all but the most extreme
+ cases. A value for the match limit may also be supplied by an item at
the start of a pattern of the form
(*LIMIT_MATCH=ddd)
- where ddd is a decimal number. However, such a setting is ignored
- unless ddd is less than the limit set by the caller of pcre2_match()
+ where ddd is a decimal number. However, such a setting is ignored
+ unless ddd is less than the limit set by the caller of pcre2_match()
or, if no such limit is set, less than the default.
int pcre2_set_depth_limit(pcre2_match_context *mcontext,
uint32_t value);
- This parameter limits the depth of nested backtracking in
- pcre2_match(). Each time a nested backtracking point is passed, a new
+ This parameter limits the depth of nested backtracking in
+ pcre2_match(). Each time a nested backtracking point is passed, a new
memory "frame" is used to remember the state of matching at that point.
- Thus, this parameter indirectly limits the amount of memory that is
- used in a match. However, because the size of each memory "frame"
+ Thus, this parameter indirectly limits the amount of memory that is
+ used in a match. However, because the size of each memory "frame"
depends on the number of capturing parentheses, the actual memory limit
- varies from pattern to pattern. This limit was more useful in versions
+ varies from pattern to pattern. This limit was more useful in versions
before 10.30, where function recursion was used for backtracking.
- The depth limit is not relevant, and is ignored, when matching is done
+ The depth limit is not relevant, and is ignored, when matching is done
using JIT compiled code. However, it is supported by pcre2_dfa_match(),
- which uses it to limit the depth of internal recursive function calls
+ which uses it to limit the depth of internal recursive function calls
that implement atomic groups, lookaround assertions, and pattern recur-
- sions. This is, therefore, an indirect limit on the amount of system
+ sions. This is, therefore, an indirect limit on the amount of system
stack that is used. A recursive pattern such as /(.)(?1)/, when matched
- to a very long string using pcre2_dfa_match(), can use a great deal of
+ to a very long string using pcre2_dfa_match(), can use a great deal of
stack.
- The default value for the depth limit can be set when PCRE2 is built;
- the default default is the same value as the default for the match
- limit. If the limit is exceeded, pcre2_match() or pcre2_dfa_match()
+ The default value for the depth limit can be set when PCRE2 is built;
+ the default default is the same value as the default for the match
+ limit. If the limit is exceeded, pcre2_match() or pcre2_dfa_match()
returns PCRE2_ERROR_DEPTHLIMIT. A value for the depth limit may also be
supplied by an item at the start of a pattern of the form
(*LIMIT_DEPTH=ddd)
- where ddd is a decimal number. However, such a setting is ignored
+ where ddd is a decimal number. However, such a setting is ignored
unless ddd is less than the limit set by the caller of pcre2_match() or
pcre2_dfa_match() or, if no such limit is set, less than the default.
@@ -1021,88 +1022,88 @@
int pcre2_config(uint32_t what, void *where);
- The function pcre2_config() makes it possible for a PCRE2 client to
- discover which optional features have been compiled into the PCRE2
- library. The pcre2build documentation has more details about these
+ The function pcre2_config() makes it possible for a PCRE2 client to
+ discover which optional features have been compiled into the PCRE2
+ library. The pcre2build documentation has more details about these
optional features.
- The first argument for pcre2_config() specifies which information is
- required. The second argument is a pointer to memory into which the
- information is placed. If NULL is passed, the function returns the
- amount of memory that is needed for the requested information. For
- calls that return numerical values, the value is in bytes; when
- requesting these values, where should point to appropriately aligned
- memory. For calls that return strings, the required length is given in
+ The first argument for pcre2_config() specifies which information is
+ required. The second argument is a pointer to memory into which the
+ information is placed. If NULL is passed, the function returns the
+ amount of memory that is needed for the requested information. For
+ calls that return numerical values, the value is in bytes; when
+ requesting these values, where should point to appropriately aligned
+ memory. For calls that return strings, the required length is given in
code units, not counting the terminating zero.
- When requesting information, the returned value from pcre2_config() is
- non-negative on success, or the negative error code PCRE2_ERROR_BADOP-
- TION if the value in the first argument is not recognized. The follow-
+ When requesting information, the returned value from pcre2_config() is
+ non-negative on success, or the negative error code PCRE2_ERROR_BADOP-
+ TION if the value in the first argument is not recognized. The follow-
ing information is available:
PCRE2_CONFIG_BSR
- The output is a uint32_t integer whose value indicates what character
- sequences the \R escape sequence matches by default. A value of
+ The output is a uint32_t integer whose value indicates what character
+ sequences the \R escape sequence matches by default. A value of
PCRE2_BSR_UNICODE means that \R matches any Unicode line ending
- sequence; a value of PCRE2_BSR_ANYCRLF means that \R matches only CR,
+ sequence; a value of PCRE2_BSR_ANYCRLF means that \R matches only CR,
LF, or CRLF. The default can be overridden when a pattern is compiled.
PCRE2_CONFIG_DEPTHLIMIT
- The output is a uint32_t integer that gives the default limit for the
- depth of nested backtracking in pcre2_match() or the depth of nested
- recursions and lookarounds in pcre2_dfa_match(). Further details are
+ The output is a uint32_t integer that gives the default limit for the
+ depth of nested backtracking in pcre2_match() or the depth of nested
+ recursions and lookarounds in pcre2_dfa_match(). Further details are
given with pcre2_set_depth_limit() above.
PCRE2_CONFIG_HEAPLIMIT
- The output is a uint32_t integer that gives, in kilobytes, the default
- limit for the amount of heap memory used by pcre2_match(). Further
+ The output is a uint32_t integer that gives, in kilobytes, the default
+ limit for the amount of heap memory used by pcre2_match(). Further
details are given with pcre2_set_heap_limit() above.
PCRE2_CONFIG_JIT
- The output is a uint32_t integer that is set to one if support for
+ The output is a uint32_t integer that is set to one if support for
just-in-time compiling is available; otherwise it is set to zero.
PCRE2_CONFIG_JITTARGET
- The where argument should point to a buffer that is at least 48 code
- units long. (The exact length required can be found by calling
- pcre2_config() with where set to NULL.) The buffer is filled with a
- string that contains the name of the architecture for which the JIT
- compiler is configured, for example "x86 32bit (little endian +
- unaligned)". If JIT support is not available, PCRE2_ERROR_BADOPTION is
- returned, otherwise the number of code units used is returned. This is
+ The where argument should point to a buffer that is at least 48 code
+ units long. (The exact length required can be found by calling
+ pcre2_config() with where set to NULL.) The buffer is filled with a
+ string that contains the name of the architecture for which the JIT
+ compiler is configured, for example "x86 32bit (little endian +
+ unaligned)". If JIT support is not available, PCRE2_ERROR_BADOPTION is
+ returned, otherwise the number of code units used is returned. This is
the length of the string, plus one unit for the terminating zero.
PCRE2_CONFIG_LINKSIZE
The output is a uint32_t integer that contains the number of bytes used
- for internal linkage in compiled regular expressions. When PCRE2 is
- configured, the value can be set to 2, 3, or 4, with the default being
- 2. This is the value that is returned by pcre2_config(). However, when
- the 16-bit library is compiled, a value of 3 is rounded up to 4, and
- when the 32-bit library is compiled, internal linkages always use 4
+ for internal linkage in compiled regular expressions. When PCRE2 is
+ configured, the value can be set to 2, 3, or 4, with the default being
+ 2. This is the value that is returned by pcre2_config(). However, when
+ the 16-bit library is compiled, a value of 3 is rounded up to 4, and
+ when the 32-bit library is compiled, internal linkages always use 4
bytes, so the configured value is not relevant.
The default value of 2 for the 8-bit and 16-bit libraries is sufficient
- for all but the most massive patterns, since it allows the size of the
+ for all but the most massive patterns, since it allows the size of the
compiled pattern to be up to 64K code units. Larger values allow larger
- regular expressions to be compiled by those two libraries, but at the
+ regular expressions to be compiled by those two libraries, but at the
expense of slower matching.
PCRE2_CONFIG_MATCHLIMIT
The output is a uint32_t integer that gives the default match limit for
- pcre2_match(). Further details are given with pcre2_set_match_limit()
+ pcre2_match(). Further details are given with pcre2_set_match_limit()
above.
PCRE2_CONFIG_NEWLINE
- The output is a uint32_t integer whose value specifies the default
- character sequence that is recognized as meaning "newline". The values
+ The output is a uint32_t integer whose value specifies the default
+ character sequence that is recognized as meaning "newline". The values
are:
PCRE2_NEWLINE_CR Carriage return (CR)
@@ -1110,18 +1111,19 @@
PCRE2_NEWLINE_CRLF Carriage return, linefeed (CRLF)
PCRE2_NEWLINE_ANY Any Unicode line ending
PCRE2_NEWLINE_ANYCRLF Any of CR, LF, or CRLF
+ PCRE2_NEWLINE_NUL The NUL character (binary zero)
- The default should normally correspond to the standard sequence for
+ The default should normally correspond to the standard sequence for
your operating system.
PCRE2_CONFIG_PARENSLIMIT
- The output is a uint32_t integer that gives the maximum depth of nest-
+ The output is a uint32_t integer that gives the maximum depth of nest-
ing of parentheses (of any kind) in a pattern. This limit is imposed to
- cap the amount of system stack used when a pattern is compiled. It is
- specified when PCRE2 is built; the default is 250. This limit does not
- take into account the stack that may already be used by the calling
- application. For finer control over compilation stack usage, see
+ cap the amount of system stack used when a pattern is compiled. It is
+ specified when PCRE2 is built; the default is 250. This limit does not
+ take into account the stack that may already be used by the calling
+ application. For finer control over compilation stack usage, see
pcre2_set_compile_recursion_guard().
PCRE2_CONFIG_STACKRECURSE
@@ -1131,25 +1133,25 @@
PCRE2_CONFIG_UNICODE_VERSION
- The where argument should point to a buffer that is at least 24 code
- units long. (The exact length required can be found by calling
- pcre2_config() with where set to NULL.) If PCRE2 has been compiled
- without Unicode support, the buffer is filled with the text "Unicode
- not supported". Otherwise, the Unicode version string (for example,
- "8.0.0") is inserted. The number of code units used is returned. This
+ The where argument should point to a buffer that is at least 24 code
+ units long. (The exact length required can be found by calling
+ pcre2_config() with where set to NULL.) If PCRE2 has been compiled
+ without Unicode support, the buffer is filled with the text "Unicode
+ not supported". Otherwise, the Unicode version string (for example,
+ "8.0.0") is inserted. The number of code units used is returned. This
is the length of the string plus one unit for the terminating zero.
PCRE2_CONFIG_UNICODE
- The output is a uint32_t integer that is set to one if Unicode support
- is available; otherwise it is set to zero. Unicode support implies UTF
+ The output is a uint32_t integer that is set to one if Unicode support
+ is available; otherwise it is set to zero. Unicode support implies UTF
support.
PCRE2_CONFIG_VERSION
- The where argument should point to a buffer that is at least 24 code
- units long. (The exact length required can be found by calling
- pcre2_config() with where set to NULL.) The buffer is filled with the
+ The where argument should point to a buffer that is at least 24 code
+ units long. (The exact length required can be found by calling
+ pcre2_config() with where set to NULL.) The buffer is filled with the
PCRE2 version string, zero-terminated. The number of code units used is
returned. This is the length of the string plus one unit for the termi-
nating zero.
@@ -1167,90 +1169,90 @@
pcre2_code *pcre2_code_copy_with_tables(const pcre2_code *code);
- The pcre2_compile() function compiles a pattern into an internal form.
- The pattern is defined by a pointer to a string of code units and a
- length. If the pattern is zero-terminated, the length can be specified
- as PCRE2_ZERO_TERMINATED. The function returns a pointer to a block of
- memory that contains the compiled pattern and related data, or NULL if
+ The pcre2_compile() function compiles a pattern into an internal form.
+ The pattern is defined by a pointer to a string of code units and a
+ length. If the pattern is zero-terminated, the length can be specified
+ as PCRE2_ZERO_TERMINATED. The function returns a pointer to a block of
+ memory that contains the compiled pattern and related data, or NULL if
an error occurred.
- If the compile context argument ccontext is NULL, memory for the com-
- piled pattern is obtained by calling malloc(). Otherwise, it is
- obtained from the same memory function that was used for the compile
- context. The caller must free the memory by calling pcre2_code_free()
+ If the compile context argument ccontext is NULL, memory for the com-
+ piled pattern is obtained by calling malloc(). Otherwise, it is
+ obtained from the same memory function that was used for the compile
+ context. The caller must free the memory by calling pcre2_code_free()
when it is no longer needed.
The function pcre2_code_copy() makes a copy of the compiled code in new
- memory, using the same memory allocator as was used for the original.
- However, if the code has been processed by the JIT compiler (see
- below), the JIT information cannot be copied (because it is position-
+ memory, using the same memory allocator as was used for the original.
+ However, if the code has been processed by the JIT compiler (see
+ below), the JIT information cannot be copied (because it is position-
dependent). The new copy can initially be used only for non-JIT match-
ing, though it can be passed to pcre2_jit_compile() if required.
The pcre2_code_copy() function provides a way for individual threads in
- a multithreaded application to acquire a private copy of shared com-
- piled code. However, it does not make a copy of the character tables
- used by the compiled pattern; the new pattern code points to the same
- tables as the original code. (See "Locale Support" below for details
- of these character tables.) In many applications the same tables are
- used throughout, so this behaviour is appropriate. Nevertheless, there
+ a multithreaded application to acquire a private copy of shared com-
+ piled code. However, it does not make a copy of the character tables
+ used by the compiled pattern; the new pattern code points to the same
+ tables as the original code. (See "Locale Support" below for details
+ of these character tables.) In many applications the same tables are
+ used throughout, so this behaviour is appropriate. Nevertheless, there
are occasions when a copy of a compiled pattern and the relevant tables
- are needed. The pcre2_code_copy_with_tables() provides this facility.
- Copies of both the code and the tables are made, with the new code
- pointing to the new tables. The memory for the new tables is automati-
- cally freed when pcre2_code_free() is called for the new copy of the
+ are needed. The pcre2_code_copy_with_tables() provides this facility.
+ Copies of both the code and the tables are made, with the new code
+ pointing to the new tables. The memory for the new tables is automati-
+ cally freed when pcre2_code_free() is called for the new copy of the
compiled code.
- NOTE: When one of the matching functions is called, pointers to the
+ NOTE: When one of the matching functions is called, pointers to the
compiled pattern and the subject string are set in the match data block
- so that they can be referenced by the substring extraction functions.
- After running a match, you must not free a compiled pattern (or a sub-
- ject string) until after all operations on the match data block have
+ so that they can be referenced by the substring extraction functions.
+ After running a match, you must not free a compiled pattern (or a sub-
+ ject string) until after all operations on the match data block have
taken place.
- The options argument for pcre2_compile() contains various bit settings
- that affect the compilation. It should be zero if no options are
- required. The available options are described below. Some of them (in
- particular, those that are compatible with Perl, but some others as
- well) can also be set and unset from within the pattern (see the
+ The options argument for pcre2_compile() contains various bit settings
+ that affect the compilation. It should be zero if no options are
+ required. The available options are described below. Some of them (in
+ particular, those that are compatible with Perl, but some others as
+ well) can also be set and unset from within the pattern (see the
detailed description in the pcre2pattern documentation).
- For those options that can be different in different parts of the pat-
- tern, the contents of the options argument specifies their settings at
- the start of compilation. The PCRE2_ANCHORED, PCRE2_ENDANCHORED, and
- PCRE2_NO_UTF_CHECK options can be set at the time of matching as well
+ For those options that can be different in different parts of the pat-
+ tern, the contents of the options argument specifies their settings at
+ the start of compilation. The PCRE2_ANCHORED, PCRE2_ENDANCHORED, and
+ PCRE2_NO_UTF_CHECK options can be set at the time of matching as well
as at compile time.
- Other, less frequently required compile-time parameters (for example,
+ Other, less frequently required compile-time parameters (for example,
the newline setting) can be provided in a compile context (as described
above).
If errorcode or erroroffset is NULL, pcre2_compile() returns NULL imme-
- diately. Otherwise, the variables to which these point are set to an
- error code and an offset (number of code units) within the pattern,
- respectively, when pcre2_compile() returns NULL because a compilation
+ diately. Otherwise, the variables to which these point are set to an
+ error code and an offset (number of code units) within the pattern,
+ respectively, when pcre2_compile() returns NULL because a compilation
error has occurred. The values are not defined when compilation is suc-
cessful and pcre2_compile() returns a non-NULL value.
The value returned in erroroffset is an indication of where in the pat-
- tern the error occurred. It is not necessarily the furthest point in
- the pattern that was read. For example, after the error "lookbehind
+ tern the error occurred. It is not necessarily the furthest point in
+ the pattern that was read. For example, after the error "lookbehind
assertion is not fixed length", the error offset points to the start of
the failing assertion.
- The pcre2_get_error_message() function (see "Obtaining a textual error
- message" below) provides a textual message for each error code. Compi-
+ The pcre2_get_error_message() function (see "Obtaining a textual error
+ message" below) provides a textual message for each error code. Compi-
lation errors have positive error codes; UTF formatting error codes are
- negative. For an invalid UTF-8 or UTF-16 string, the offset is that of
+ negative. For an invalid UTF-8 or UTF-16 string, the offset is that of
the first code unit of the failing character.
- Some errors are not detected until the whole pattern has been scanned;
- in these cases, the offset passed back is the length of the pattern.
- Note that the offset is in code units, not characters, even in a UTF
+ Some errors are not detected until the whole pattern has been scanned;
+ in these cases, the offset passed back is the length of the pattern.
+ Note that the offset is in code units, not characters, even in a UTF
mode. It may sometimes point into the middle of a UTF-8 or UTF-16 char-
acter.
- This code fragment shows a typical straightforward call to pcre2_com-
+ This code fragment shows a typical straightforward call to pcre2_com-
pile():
pcre2_code *re;
@@ -1264,28 +1266,28 @@
&erroffset, /* for error offset */
NULL); /* no compile context */
- The following names for option bits are defined in the pcre2.h header
+ The following names for option bits are defined in the pcre2.h header
file:
PCRE2_ANCHORED
If this bit is set, the pattern is forced to be "anchored", that is, it
- is constrained to match only at the first matching point in the string
- that is being searched (the "subject string"). This effect can also be
- achieved by appropriate constructs in the pattern itself, which is the
+ is constrained to match only at the first matching point in the string
+ that is being searched (the "subject string"). This effect can also be
+ achieved by appropriate constructs in the pattern itself, which is the
only way to do it in Perl.
PCRE2_ALLOW_EMPTY_CLASS
- By default, for compatibility with Perl, a closing square bracket that
- immediately follows an opening one is treated as a data character for
- the class. When PCRE2_ALLOW_EMPTY_CLASS is set, it terminates the
+ By default, for compatibility with Perl, a closing square bracket that
+ immediately follows an opening one is treated as a data character for
+ the class. When PCRE2_ALLOW_EMPTY_CLASS is set, it terminates the
class, which therefore contains no characters and so can never match.
PCRE2_ALT_BSUX
- This option request alternative handling of three escape sequences,
- which makes PCRE2's behaviour more like ECMAscript (aka JavaScript).
+ This option request alternative handling of three escape sequences,
+ which makes PCRE2's behaviour more like ECMAscript (aka JavaScript).
When it is set:
(1) \U matches an upper case "U" character; by default \U causes a com-
@@ -1292,13 +1294,13 @@
pile time error (Perl uses \U to upper case subsequent characters).
(2) \u matches a lower case "u" character unless it is followed by four
- hexadecimal digits, in which case the hexadecimal number defines the
- code point to match. By default, \u causes a compile time error (Perl
+ hexadecimal digits, in which case the hexadecimal number defines the
+ code point to match. By default, \u causes a compile time error (Perl
uses it to upper case the following character).
- (3) \x matches a lower case "x" character unless it is followed by two
- hexadecimal digits, in which case the hexadecimal number defines the
- code point to match. By default, as in Perl, a hexadecimal number is
+ (3) \x matches a lower case "x" character unless it is followed by two
+ hexadecimal digits, in which case the hexadecimal number defines the
+ code point to match. By default, as in Perl, a hexadecimal number is
always expected after \x, but it may have zero, one, or two digits (so,
for example, \xz matches a binary zero character followed by z).
@@ -1305,62 +1307,62 @@
PCRE2_ALT_CIRCUMFLEX
In multiline mode (when PCRE2_MULTILINE is set), the circumflex
- metacharacter matches at the start of the subject (unless PCRE2_NOTBOL
- is set), and also after any internal newline. However, it does not
+ metacharacter matches at the start of the subject (unless PCRE2_NOTBOL
+ is set), and also after any internal newline. However, it does not
match after a newline at the end of the subject, for compatibility with
- Perl. If you want a multiline circumflex also to match after a termi-
+ Perl. If you want a multiline circumflex also to match after a termi-
nating newline, you must set PCRE2_ALT_CIRCUMFLEX.
PCRE2_ALT_VERBNAMES
- By default, for compatibility with Perl, the name in any verb sequence
- such as (*MARK:NAME) is any sequence of characters that does not
- include a closing parenthesis. The name is not processed in any way,
- and it is not possible to include a closing parenthesis in the name.
- However, if the PCRE2_ALT_VERBNAMES option is set, normal backslash
- processing is applied to verb names and only an unescaped closing
- parenthesis terminates the name. A closing parenthesis can be included
- in a name either as \) or between \Q and \E. If the PCRE2_EXTENDED or
- PCRE2_EXTENDED_MORE option is set, unescaped whitespace in verb names
- is skipped and #-comments are recognized in this mode, exactly as in
+ By default, for compatibility with Perl, the name in any verb sequence
+ such as (*MARK:NAME) is any sequence of characters that does not
+ include a closing parenthesis. The name is not processed in any way,
+ and it is not possible to include a closing parenthesis in the name.
+ However, if the PCRE2_ALT_VERBNAMES option is set, normal backslash
+ processing is applied to verb names and only an unescaped closing
+ parenthesis terminates the name. A closing parenthesis can be included
+ in a name either as \) or between \Q and \E. If the PCRE2_EXTENDED or
+ PCRE2_EXTENDED_MORE option is set, unescaped whitespace in verb names
+ is skipped and #-comments are recognized in this mode, exactly as in
the rest of the pattern.
PCRE2_AUTO_CALLOUT
- If this bit is set, pcre2_compile() automatically inserts callout
- items, all with number 255, before each pattern item, except immedi-
- ately before or after an explicit callout in the pattern. For discus-
+ If this bit is set, pcre2_compile() automatically inserts callout
+ items, all with number 255, before each pattern item, except immedi-
+ ately before or after an explicit callout in the pattern. For discus-
sion of the callout facility, see the pcre2callout documentation.
PCRE2_CASELESS
- If this bit is set, letters in the pattern match both upper and lower
- case letters in the subject. It is equivalent to Perl's /i option, and
- it can be changed within a pattern by a (?i) option setting. If
- PCRE2_UTF is set, Unicode properties are used for all characters with
- more than one other case, and for all characters whose code points are
- greater than U+007f. For lower valued characters with only one other
- case, a lookup table is used for speed. When PCRE2_UTF is not set, a
+ If this bit is set, letters in the pattern match both upper and lower
+ case letters in the subject. It is equivalent to Perl's /i option, and
+ it can be changed within a pattern by a (?i) option setting. If
+ PCRE2_UTF is set, Unicode properties are used for all characters with
+ more than one other case, and for all characters whose code points are
+ greater than U+007f. For lower valued characters with only one other
+ case, a lookup table is used for speed. When PCRE2_UTF is not set, a
lookup table is used for all code points less than 256, and higher code
- points (available only in 16-bit or 32-bit mode) are treated as not
+ points (available only in 16-bit or 32-bit mode) are treated as not
having another case.
PCRE2_DOLLAR_ENDONLY
- If this bit is set, a dollar metacharacter in the pattern matches only
- at the end of the subject string. Without this option, a dollar also
- matches immediately before a newline at the end of the string (but not
- before any other newlines). The PCRE2_DOLLAR_ENDONLY option is ignored
- if PCRE2_MULTILINE is set. There is no equivalent to this option in
+ If this bit is set, a dollar metacharacter in the pattern matches only
+ at the end of the subject string. Without this option, a dollar also
+ matches immediately before a newline at the end of the string (but not
+ before any other newlines). The PCRE2_DOLLAR_ENDONLY option is ignored
+ if PCRE2_MULTILINE is set. There is no equivalent to this option in
Perl, and no way to set it within a pattern.
PCRE2_DOTALL
- If this bit is set, a dot metacharacter in the pattern matches any
- character, including one that indicates a newline. However, it only
+ If this bit is set, a dot metacharacter in the pattern matches any
+ character, including one that indicates a newline. However, it only
ever matches one character, even if newlines are coded as CRLF. Without
this option, a dot does not match when the current position in the sub-
- ject is at a newline. This option is equivalent to Perl's /s option,
+ ject is at a newline. This option is equivalent to Perl's /s option,
and it can be changed within a pattern by a (?s) option setting. A neg-
ative class such as [^a] always matches newline characters, independent
of the setting of this option.
@@ -1367,253 +1369,253 @@
PCRE2_DUPNAMES
- If this bit is set, names used to identify capturing subpatterns need
+ If this bit is set, names used to identify capturing subpatterns need
not be unique. This can be helpful for certain types of pattern when it
- is known that only one instance of the named subpattern can ever be
- matched. There are more details of named subpatterns below; see also
+ is known that only one instance of the named subpattern can ever be
+ matched. There are more details of named subpatterns below; see also
the pcre2pattern documentation.
PCRE2_ENDANCHORED
- If this bit is set, the end of any pattern match must be right at the
+ If this bit is set, the end of any pattern match must be right at the
end of the string being searched (the "subject string"). If the pattern
match succeeds by reaching (*ACCEPT), but does not reach the end of the
- subject, the match fails at the current starting point. For unanchored
- patterns, a new match is then tried at the next starting point. How-
+ subject, the match fails at the current starting point. For unanchored
+ patterns, a new match is then tried at the next starting point. How-
ever, if the match succeeds by reaching the end of the pattern, but not
- the end of the subject, backtracking occurs and an alternative match
+ the end of the subject, backtracking occurs and an alternative match
may be found. Consider these two patterns:
.(*ACCEPT)|..
.|..
- If matched against "abc" with PCRE2_ENDANCHORED set, the first matches
- "c" whereas the second matches "bc". The effect of PCRE2_ENDANCHORED
- can also be achieved by appropriate constructs in the pattern itself,
+ If matched against "abc" with PCRE2_ENDANCHORED set, the first matches
+ "c" whereas the second matches "bc". The effect of PCRE2_ENDANCHORED
+ can also be achieved by appropriate constructs in the pattern itself,
which is the only way to do it in Perl.
For DFA matching with pcre2_dfa_match(), PCRE2_ENDANCHORED applies only
- to the first (that is, the longest) matched string. Other parallel
- matches, which are necessarily substrings of the first one, must obvi-
+ to the first (that is, the longest) matched string. Other parallel
+ matches, which are necessarily substrings of the first one, must obvi-
ously end before the end of the subject.
PCRE2_EXTENDED
- If this bit is set, most white space characters in the pattern are
- totally ignored except when escaped or inside a character class. How-
- ever, white space is not allowed within sequences such as (?> that
+ If this bit is set, most white space characters in the pattern are
+ totally ignored except when escaped or inside a character class. How-
+ ever, white space is not allowed within sequences such as (?> that
introduce various parenthesized subpatterns, nor within numerical quan-
- tifiers such as {1,3}. Ignorable white space is permitted between an
- item and a following quantifier and between a quantifier and a follow-
+ tifiers such as {1,3}. Ignorable white space is permitted between an
+ item and a following quantifier and between a quantifier and a follow-
ing + that indicates possessiveness.
- PCRE2_EXTENDED also causes characters between an unescaped # outside a
- character class and the next newline, inclusive, to be ignored, which
+ PCRE2_EXTENDED also causes characters between an unescaped # outside a
+ character class and the next newline, inclusive, to be ignored, which
makes it possible to include comments inside complicated patterns. Note
- that the end of this type of comment is a literal newline sequence in
+ that the end of this type of comment is a literal newline sequence in
the pattern; escape sequences that happen to represent a newline do not
- count. PCRE2_EXTENDED is equivalent to Perl's /x option, and it can be
+ count. PCRE2_EXTENDED is equivalent to Perl's /x option, and it can be
changed within a pattern by a (?x) option setting.
Which characters are interpreted as newlines can be specified by a set-
- ting in the compile context that is passed to pcre2_compile() or by a
- special sequence at the start of the pattern, as described in the sec-
- tion entitled "Newline conventions" in the pcre2pattern documentation.
+ ting in the compile context that is passed to pcre2_compile() or by a
+ special sequence at the start of the pattern, as described in the sec-
+ tion entitled "Newline conventions" in the pcre2pattern documentation.
A default is defined when PCRE2 is built.
PCRE2_EXTENDED_MORE
- This option has the effect of PCRE2_EXTENDED, but, in addition,
- unescaped space and horizontal tab characters are ignored inside a
- character class. PCRE2_EXTENDED_MORE is equivalent to Perl's 5.26 /xx
- option, and it can be changed within a pattern by a (?xx) option set-
+ This option has the effect of PCRE2_EXTENDED, but, in addition,
+ unescaped space and horizontal tab characters are ignored inside a
+ character class. PCRE2_EXTENDED_MORE is equivalent to Perl's 5.26 /xx
+ option, and it can be changed within a pattern by a (?xx) option set-
ting.
PCRE2_FIRSTLINE
If this option is set, the start of an unanchored pattern match must be
- before or at the first newline in the subject string, though the
- matched text may continue over the newline. See also PCRE2_USE_OFF-
- SET_LIMIT, which provides a more general limiting facility. If
- PCRE2_FIRSTLINE is set with an offset limit, a match must occur in the
- first line and also within the offset limit. In other words, whichever
+ before or at the first newline in the subject string, though the
+ matched text may continue over the newline. See also PCRE2_USE_OFF-
+ SET_LIMIT, which provides a more general limiting facility. If
+ PCRE2_FIRSTLINE is set with an offset limit, a match must occur in the
+ first line and also within the offset limit. In other words, whichever
limit comes first is used.
PCRE2_MATCH_UNSET_BACKREF
- If this option is set, a back reference to an unset subpattern group
- matches an empty string (by default this causes the current matching
- alternative to fail). A pattern such as (\1)(a) succeeds when this
- option is set (assuming it can find an "a" in the subject), whereas it
- fails by default, for Perl compatibility. Setting this option makes
+ If this option is set, a back reference to an unset subpattern group
+ matches an empty string (by default this causes the current matching
+ alternative to fail). A pattern such as (\1)(a) succeeds when this
+ option is set (assuming it can find an "a" in the subject), whereas it
+ fails by default, for Perl compatibility. Setting this option makes
PCRE2 behave more like ECMAscript (aka JavaScript).
PCRE2_MULTILINE
- By default, for the purposes of matching "start of line" and "end of
- line", PCRE2 treats the subject string as consisting of a single line
- of characters, even if it actually contains newlines. The "start of
- line" metacharacter (^) matches only at the start of the string, and
- the "end of line" metacharacter ($) matches only at the end of the
+ By default, for the purposes of matching "start of line" and "end of
+ line", PCRE2 treats the subject string as consisting of a single line
+ of characters, even if it actually contains newlines. The "start of
+ line" metacharacter (^) matches only at the start of the string, and
+ the "end of line" metacharacter ($) matches only at the end of the
string, or before a terminating newline (except when PCRE2_DOL-
- LAR_ENDONLY is set). Note, however, that unless PCRE2_DOTALL is set,
+ LAR_ENDONLY is set). Note, however, that unless PCRE2_DOTALL is set,
the "any character" metacharacter (.) does not match at a newline. This
behaviour (for ^, $, and dot) is the same as Perl.
- When PCRE2_MULTILINE it is set, the "start of line" and "end of line"
- constructs match immediately following or immediately before internal
- newlines in the subject string, respectively, as well as at the very
- start and end. This is equivalent to Perl's /m option, and it can be
+ When PCRE2_MULTILINE it is set, the "start of line" and "end of line"
+ constructs match immediately following or immediately before internal
+ newlines in the subject string, respectively, as well as at the very
+ start and end. This is equivalent to Perl's /m option, and it can be
changed within a pattern by a (?m) option setting. Note that the "start
of line" metacharacter does not match after a newline at the end of the
- subject, for compatibility with Perl. However, you can change this by
- setting the PCRE2_ALT_CIRCUMFLEX option. If there are no newlines in a
- subject string, or no occurrences of ^ or $ in a pattern, setting
+ subject, for compatibility with Perl. However, you can change this by
+ setting the PCRE2_ALT_CIRCUMFLEX option. If there are no newlines in a
+ subject string, or no occurrences of ^ or $ in a pattern, setting
PCRE2_MULTILINE has no effect.
PCRE2_NEVER_BACKSLASH_C
- This option locks out the use of \C in the pattern that is being com-
- piled. This escape can cause unpredictable behaviour in UTF-8 or
- UTF-16 modes, because it may leave the current matching point in the
- middle of a multi-code-unit character. This option may be useful in
- applications that process patterns from external sources. Note that
+ This option locks out the use of \C in the pattern that is being com-
+ piled. This escape can cause unpredictable behaviour in UTF-8 or
+ UTF-16 modes, because it may leave the current matching point in the
+ middle of a multi-code-unit character. This option may be useful in
+ applications that process patterns from external sources. Note that
there is also a build-time option that permanently locks out the use of
\C.
PCRE2_NEVER_UCP
- This option locks out the use of Unicode properties for handling \B,
+ This option locks out the use of Unicode properties for handling \B,
\b, \D, \d, \S, \s, \W, \w, and some of the POSIX character classes, as
- described for the PCRE2_UCP option below. In particular, it prevents
- the creator of the pattern from enabling this facility by starting the
- pattern with (*UCP). This option may be useful in applications that
+ described for the PCRE2_UCP option below. In particular, it prevents
+ the creator of the pattern from enabling this facility by starting the
+ pattern with (*UCP). This option may be useful in applications that
process patterns from external sources. The option combination PCRE_UCP
and PCRE_NEVER_UCP causes an error.
PCRE2_NEVER_UTF
- This option locks out interpretation of the pattern as UTF-8, UTF-16,
+ This option locks out interpretation of the pattern as UTF-8, UTF-16,
or UTF-32, depending on which library is in use. In particular, it pre-
- vents the creator of the pattern from switching to UTF interpretation
- by starting the pattern with (*UTF). This option may be useful in
- applications that process patterns from external sources. The combina-
+ vents the creator of the pattern from switching to UTF interpretation
+ by starting the pattern with (*UTF). This option may be useful in
+ applications that process patterns from external sources. The combina-
tion of PCRE2_UTF and PCRE2_NEVER_UTF causes an error.
PCRE2_NO_AUTO_CAPTURE
If this option is set, it disables the use of numbered capturing paren-
- theses in the pattern. Any opening parenthesis that is not followed by
- ? behaves as if it were followed by ?: but named parentheses can still
+ theses in the pattern. Any opening parenthesis that is not followed by
+ ? behaves as if it were followed by ?: but named parentheses can still
be used for capturing (and they acquire numbers in the usual way). This
- is the same as Perl's /n option. Note that, when this option is set,
+ is the same as Perl's /n option. Note that, when this option is set,
references to capturing groups (back references or recursion/subroutine
- calls) may only refer to named groups, though the reference can be by
+ calls) may only refer to named groups, though the reference can be by
name or by number.
PCRE2_NO_AUTO_POSSESS
If this option is set, it disables "auto-possessification", which is an
- optimization that, for example, turns a+b into a++b in order to avoid
- backtracks into a+ that can never be successful. However, if callouts
- are in use, auto-possessification means that some callouts are never
+ optimization that, for example, turns a+b into a++b in order to avoid
+ backtracks into a+ that can never be successful. However, if callouts
+ are in use, auto-possessification means that some callouts are never
taken. You can set this option if you want the matching functions to do
- a full unoptimized search and run all the callouts, but it is mainly
+ a full unoptimized search and run all the callouts, but it is mainly
provided for testing purposes.
PCRE2_NO_DOTSTAR_ANCHOR
If this option is set, it disables an optimization that is applied when
- .* is the first significant item in a top-level branch of a pattern,
- and all the other branches also start with .* or with \A or \G or ^.
- The optimization is automatically disabled for .* if it is inside an
- atomic group or a capturing group that is the subject of a back refer-
- ence, or if the pattern contains (*PRUNE) or (*SKIP). When the opti-
- mization is not disabled, such a pattern is automatically anchored if
+ .* is the first significant item in a top-level branch of a pattern,
+ and all the other branches also start with .* or with \A or \G or ^.
+ The optimization is automatically disabled for .* if it is inside an
+ atomic group or a capturing group that is the subject of a back refer-
+ ence, or if the pattern contains (*PRUNE) or (*SKIP). When the opti-
+ mization is not disabled, such a pattern is automatically anchored if
PCRE2_DOTALL is set for all the .* items and PCRE2_MULTILINE is not set
- for any ^ items. Otherwise, the fact that any match must start either
- at the start of the subject or following a newline is remembered. Like
+ for any ^ items. Otherwise, the fact that any match must start either
+ at the start of the subject or following a newline is remembered. Like
other optimizations, this can cause callouts to be skipped.
PCRE2_NO_START_OPTIMIZE
- This is an option whose main effect is at matching time. It does not
+ This is an option whose main effect is at matching time. It does not
change what pcre2_compile() generates, but it does affect the output of
the JIT compiler.
- There are a number of optimizations that may occur at the start of a
- match, in order to speed up the process. For example, if it is known
- that an unanchored match must start with a specific code unit value,
- the matching code searches the subject for that value, and fails imme-
- diately if it cannot find it, without actually running the main match-
- ing function. This means that a special item such as (*COMMIT) at the
- start of a pattern is not considered until after a suitable starting
- point for the match has been found. Also, when callouts or (*MARK)
- items are in use, these "start-up" optimizations can cause them to be
- skipped if the pattern is never actually used. The start-up optimiza-
- tions are in effect a pre-scan of the subject that takes place before
+ There are a number of optimizations that may occur at the start of a
+ match, in order to speed up the process. For example, if it is known
+ that an unanchored match must start with a specific code unit value,
+ the matching code searches the subject for that value, and fails imme-
+ diately if it cannot find it, without actually running the main match-
+ ing function. This means that a special item such as (*COMMIT) at the
+ start of a pattern is not considered until after a suitable starting
+ point for the match has been found. Also, when callouts or (*MARK)
+ items are in use, these "start-up" optimizations can cause them to be
+ skipped if the pattern is never actually used. The start-up optimiza-
+ tions are in effect a pre-scan of the subject that takes place before
the pattern is run.
The PCRE2_NO_START_OPTIMIZE option disables the start-up optimizations,
- possibly causing performance to suffer, but ensuring that in cases
- where the result is "no match", the callouts do occur, and that items
+ possibly causing performance to suffer, but ensuring that in cases
+ where the result is "no match", the callouts do occur, and that items
such as (*COMMIT) and (*MARK) are considered at every possible starting
position in the subject string.
- Setting PCRE2_NO_START_OPTIMIZE may change the outcome of a matching
+ Setting PCRE2_NO_START_OPTIMIZE may change the outcome of a matching
operation. Consider the pattern
(*COMMIT)ABC
- When this is compiled, PCRE2 records the fact that a match must start
- with the character "A". Suppose the subject string is "DEFABC". The
- start-up optimization scans along the subject, finds "A" and runs the
- first match attempt from there. The (*COMMIT) item means that the pat-
- tern must match the current starting position, which in this case, it
- does. However, if the same match is run with PCRE2_NO_START_OPTIMIZE
- set, the initial scan along the subject string does not happen. The
- first match attempt is run starting from "D" and when this fails,
- (*COMMIT) prevents any further matches being tried, so the overall
+ When this is compiled, PCRE2 records the fact that a match must start
+ with the character "A". Suppose the subject string is "DEFABC". The
+ start-up optimization scans along the subject, finds "A" and runs the
+ first match attempt from there. The (*COMMIT) item means that the pat-
+ tern must match the current starting position, which in this case, it
+ does. However, if the same match is run with PCRE2_NO_START_OPTIMIZE
+ set, the initial scan along the subject string does not happen. The
+ first match attempt is run starting from "D" and when this fails,
+ (*COMMIT) prevents any further matches being tried, so the overall
result is "no match".
- There are also other start-up optimizations. For example, a minimum
+ There are also other start-up optimizations. For example, a minimum
length for the subject may be recorded. Consider the pattern
(*MARK:A)(X|Y)
- The minimum length for a match is one character. If the subject is
+ The minimum length for a match is one character. If the subject is
"ABC", there will be attempts to match "ABC", "BC", and "C". An attempt
to match an empty string at the end of the subject does not take place,
- because PCRE2 knows that the subject is now too short, and so the
- (*MARK) is never encountered. In this case, the optimization does not
+ because PCRE2 knows that the subject is now too short, and so the
+ (*MARK) is never encountered. In this case, the optimization does not
affect the overall match result, which is still "no match", but it does
affect the auxiliary information that is returned.
PCRE2_NO_UTF_CHECK
- When PCRE2_UTF is set, the validity of the pattern as a UTF string is
- automatically checked. There are discussions about the validity of
- UTF-8 strings, UTF-16 strings, and UTF-32 strings in the pcre2unicode
- document. If an invalid UTF sequence is found, pcre2_compile() returns
+ When PCRE2_UTF is set, the validity of the pattern as a UTF string is
+ automatically checked. There are discussions about the validity of
+ UTF-8 strings, UTF-16 strings, and UTF-32 strings in the pcre2unicode
+ document. If an invalid UTF sequence is found, pcre2_compile() returns
a negative error code.
- If you know that your pattern is a valid UTF string, and you want to
- skip this check for performance reasons, you can set the
- PCRE2_NO_UTF_CHECK option. When it is set, the effect of passing an
+ If you know that your pattern is a valid UTF string, and you want to
+ skip this check for performance reasons, you can set the
+ PCRE2_NO_UTF_CHECK option. When it is set, the effect of passing an
invalid UTF string as a pattern is undefined. It may cause your program
to crash or loop.
Note that this option can also be passed to pcre2_match() and
- pcre_dfa_match(), to suppress UTF validity checking of the subject
+ pcre_dfa_match(), to suppress UTF validity checking of the subject
string.
Note also that setting PCRE2_NO_UTF_CHECK at compile time does not dis-
- able the error that is given if an escape sequence for an invalid Uni-
- code code point is encountered in the pattern. In particular, the so-
- called "surrogate" code points (0xd800 to 0xdfff) are invalid. If you
- want to allow escape sequences such as \x{d800} you can set the
- PCRE2_EXTRA_ALLOW_SURROGATE_ESCAPES extra option, as described in the
- section entitled "Extra compile options" below. However, this is pos-
+ able the error that is given if an escape sequence for an invalid Uni-
+ code code point is encountered in the pattern. In particular, the so-
+ called "surrogate" code points (0xd800 to 0xdfff) are invalid. If you
+ want to allow escape sequences such as \x{d800} you can set the
+ PCRE2_EXTRA_ALLOW_SURROGATE_ESCAPES extra option, as described in the
+ section entitled "Extra compile options" below. However, this is pos-
sible only in UTF-8 and UTF-32 modes, because these values are not rep-
resentable in UTF-16.
@@ -1620,81 +1622,81 @@
PCRE2_UCP
This option changes the way PCRE2 processes \B, \b, \D, \d, \S, \s, \W,
- \w, and some of the POSIX character classes. By default, only ASCII
- characters are recognized, but if PCRE2_UCP is set, Unicode properties
- are used instead to classify characters. More details are given in the
+ \w, and some of the POSIX character classes. By default, only ASCII
+ characters are recognized, but if PCRE2_UCP is set, Unicode properties
+ are used instead to classify characters. More details are given in the
section on generic character types in the pcre2pattern page. If you set
- PCRE2_UCP, matching one of the items it affects takes much longer. The
- option is available only if PCRE2 has been compiled with Unicode sup-
+ PCRE2_UCP, matching one of the items it affects takes much longer. The
+ option is available only if PCRE2 has been compiled with Unicode sup-
port (which is the default).
PCRE2_UNGREEDY
- This option inverts the "greediness" of the quantifiers so that they
- are not greedy by default, but become greedy if followed by "?". It is
- not compatible with Perl. It can also be set by a (?U) option setting
+ This option inverts the "greediness" of the quantifiers so that they
+ are not greedy by default, but become greedy if followed by "?". It is
+ not compatible with Perl. It can also be set by a (?U) option setting
within the pattern.
PCRE2_USE_OFFSET_LIMIT
This option must be set for pcre2_compile() if pcre2_set_offset_limit()
- is going to be used to set a non-default offset limit in a match con-
- text for matches that use this pattern. An error is generated if an
- offset limit is set without this option. For more details, see the
- description of pcre2_set_offset_limit() in the section that describes
+ is going to be used to set a non-default offset limit in a match con-
+ text for matches that use this pattern. An error is generated if an
+ offset limit is set without this option. For more details, see the
+ description of pcre2_set_offset_limit() in the section that describes
match contexts. See also the PCRE2_FIRSTLINE option above.
PCRE2_UTF
- This option causes PCRE2 to regard both the pattern and the subject
- strings that are subsequently processed as strings of UTF characters
- instead of single-code-unit strings. It is available when PCRE2 is
- built to include Unicode support (which is the default). If Unicode
- support is not available, the use of this option provokes an error.
- Details of how PCRE2_UTF changes the behaviour of PCRE2 are given in
+ This option causes PCRE2 to regard both the pattern and the subject
+ strings that are subsequently processed as strings of UTF characters
+ instead of single-code-unit strings. It is available when PCRE2 is
+ built to include Unicode support (which is the default). If Unicode
+ support is not available, the use of this option provokes an error.
+ Details of how PCRE2_UTF changes the behaviour of PCRE2 are given in
the pcre2unicode page.
Extra compile options
- Unlike the main compile-time options, the extra options are not saved
+ Unlike the main compile-time options, the extra options are not saved
with the compiled pattern. The option bits that can be set in a compile
- context by calling the pcre2_set_compile_extra_options() function are
+ context by calling the pcre2_set_compile_extra_options() function are
as follows:
PCRE2_EXTRA_ALLOW_SURROGATE_ESCAPES
- This option applies when compiling a pattern in UTF-8 or UTF-32 mode.
- It is forbidden in UTF-16 mode, and ignored in non-UTF modes. Unicode
+ This option applies when compiling a pattern in UTF-8 or UTF-32 mode.
+ It is forbidden in UTF-16 mode, and ignored in non-UTF modes. Unicode
"surrogate" code points in the range 0xd800 to 0xdfff are used in pairs
- in UTF-16 to encode code points with values in the range 0x10000 to
- 0x10ffff. The surrogates cannot therefore be represented in UTF-16.
+ in UTF-16 to encode code points with values in the range 0x10000 to
+ 0x10ffff. The surrogates cannot therefore be represented in UTF-16.
They can be represented in UTF-8 and UTF-32, but are defined as invalid
- code points, and cause errors if encountered in a UTF-8 or UTF-32
+ code points, and cause errors if encountered in a UTF-8 or UTF-32
string that is being checked for validity by PCRE2.
- These values also cause errors if encountered in escape sequences such
+ These values also cause errors if encountered in escape sequences such
as \x{d912} within a pattern. However, it seems that some applications,
- when using PCRE2 to check for unwanted characters in UTF-8 strings,
- explicitly test for the surrogates using escape sequences. The
- PCRE2_NO_UTF_CHECK option does not disable the error that occurs,
- because it applies only to the testing of input strings for UTF valid-
+ when using PCRE2 to check for unwanted characters in UTF-8 strings,
+ explicitly test for the surrogates using escape sequences. The
+ PCRE2_NO_UTF_CHECK option does not disable the error that occurs,
+ because it applies only to the testing of input strings for UTF valid-
ity.
- If the extra option PCRE2_EXTRA_ALLOW_SURROGATE_ESCAPES is set, surro-
- gate code point values in UTF-8 and UTF-32 patterns no longer provoke
- errors and are incorporated in the compiled pattern. However, they can
- only match subject characters if the matching function is called with
+ If the extra option PCRE2_EXTRA_ALLOW_SURROGATE_ESCAPES is set, surro-
+ gate code point values in UTF-8 and UTF-32 patterns no longer provoke
+ errors and are incorporated in the compiled pattern. However, they can
+ only match subject characters if the matching function is called with
PCRE2_NO_UTF_CHECK set.
COMPILATION ERROR CODES
- There are nearly 100 positive error codes that pcre2_compile() may
- return (via errorcode) if it finds an error in the pattern. There are
- also some negative error codes that are used for invalid UTF strings.
+ There are nearly 100 positive error codes that pcre2_compile() may
+ return (via errorcode) if it finds an error in the pattern. There are
+ also some negative error codes that are used for invalid UTF strings.
These are the same as given by pcre2_match() and pcre2_dfa_match(), and
- are described in the pcre2unicode page. The pcre2_get_error_message()
- function (see "Obtaining a textual error message" below) can be called
+ are described in the pcre2unicode page. The pcre2_get_error_message()
+ function (see "Obtaining a textual error message" below) can be called
to obtain a textual error message from any error code.
@@ -1717,53 +1719,53 @@
void pcre2_jit_stack_free(pcre2_jit_stack *jit_stack);
- These functions provide support for JIT compilation, which, if the
- just-in-time compiler is available, further processes a compiled pat-
+ These functions provide support for JIT compilation, which, if the
+ just-in-time compiler is available, further processes a compiled pat-
tern into machine code that executes much faster than the pcre2_match()
- interpretive matching function. Full details are given in the pcre2jit
+ interpretive matching function. Full details are given in the pcre2jit
documentation.
- JIT compilation is a heavyweight optimization. It can take some time
- for patterns to be analyzed, and for one-off matches and simple pat-
- terns the benefit of faster execution might be offset by a much slower
- compilation time. Most (but not all) patterns can be optimized by the
+ JIT compilation is a heavyweight optimization. It can take some time
+ for patterns to be analyzed, and for one-off matches and simple pat-
+ terns the benefit of faster execution might be offset by a much slower
+ compilation time. Most (but not all) patterns can be optimized by the
JIT compiler.
LOCALE SUPPORT
- PCRE2 handles caseless matching, and determines whether characters are
- letters, digits, or whatever, by reference to a set of tables, indexed
- by character code point. This applies only to characters whose code
- points are less than 256. By default, higher-valued code points never
- match escapes such as \w or \d. However, if PCRE2 is built with Uni-
+ PCRE2 handles caseless matching, and determines whether characters are
+ letters, digits, or whatever, by reference to a set of tables, indexed
+ by character code point. This applies only to characters whose code
+ points are less than 256. By default, higher-valued code points never
+ match escapes such as \w or \d. However, if PCRE2 is built with Uni-
code support, all characters can be tested with \p and \P, or, alterna-
- tively, the PCRE2_UCP option can be set when a pattern is compiled;
- this causes \w and friends to use Unicode property support instead of
+ tively, the PCRE2_UCP option can be set when a pattern is compiled;
+ this causes \w and friends to use Unicode property support instead of
the built-in tables.
- The use of locales with Unicode is discouraged. If you are handling
- characters with code points greater than 128, you should either use
+ The use of locales with Unicode is discouraged. If you are handling
+ characters with code points greater than 128, you should either use
Unicode support, or use locales, but not try to mix the two.
- PCRE2 contains an internal set of character tables that are used by
- default. These are sufficient for many applications. Normally, the
+ PCRE2 contains an internal set of character tables that are used by
+ default. These are sufficient for many applications. Normally, the
internal tables recognize only ASCII characters. However, when PCRE2 is
built, it is possible to cause the internal tables to be rebuilt in the
default "C" locale of the local system, which may cause them to be dif-
ferent.
- The internal tables can be overridden by tables supplied by the appli-
- cation that calls PCRE2. These may be created in a different locale
- from the default. As more and more applications change to using Uni-
+ The internal tables can be overridden by tables supplied by the appli-
+ cation that calls PCRE2. These may be created in a different locale
+ from the default. As more and more applications change to using Uni-
code, the need for this locale support is expected to die away.
- External tables are built by calling the pcre2_maketables() function,
- in the relevant locale. The result can be passed to pcre2_compile() as
- often as necessary, by creating a compile context and calling
- pcre2_set_character_tables() to set the tables pointer therein. For
- example, to build and use tables that are appropriate for the French
- locale (where accented characters with values greater than 128 are
+ External tables are built by calling the pcre2_maketables() function,
+ in the relevant locale. The result can be passed to pcre2_compile() as
+ often as necessary, by creating a compile context and calling
+ pcre2_set_character_tables() to set the tables pointer therein. For
+ example, to build and use tables that are appropriate for the French
+ locale (where accented characters with values greater than 128 are
treated as letters), the following code could be used:
setlocale(LC_CTYPE, "fr_FR");
@@ -1772,15 +1774,15 @@
pcre2_set_character_tables(ccontext, tables);
re = pcre2_compile(..., ccontext);
- The locale name "fr_FR" is used on Linux and other Unix-like systems;
- if you are using Windows, the name for the French locale is "french".
- It is the caller's responsibility to ensure that the memory containing
+ The locale name "fr_FR" is used on Linux and other Unix-like systems;
+ if you are using Windows, the name for the French locale is "french".
+ It is the caller's responsibility to ensure that the memory containing
the tables remains available for as long as it is needed.
The pointer that is passed (via the compile context) to pcre2_compile()
- is saved with the compiled pattern, and the same tables are used by
- pcre2_match() and pcre_dfa_match(). Thus, for any single pattern, com-
- pilation and matching both happen in the same locale, but different
+ is saved with the compiled pattern, and the same tables are used by
+ pcre2_match() and pcre_dfa_match(). Thus, for any single pattern, com-
+ pilation and matching both happen in the same locale, but different
patterns can be processed in different locales.
@@ -1788,13 +1790,13 @@
int pcre2_pattern_info(const pcre2 *code, uint32_t what, void *where);
- The pcre2_pattern_info() function returns general information about a
+ The pcre2_pattern_info() function returns general information about a
compiled pattern. For information about callouts, see the next section.
- The first argument for pcre2_pattern_info() is a pointer to the com-
+ The first argument for pcre2_pattern_info() is a pointer to the com-
piled pattern. The second argument specifies which piece of information
- is required, and the third argument is a pointer to a variable to
- receive the data. If the third argument is NULL, the first argument is
- ignored, and the function returns the size in bytes of the variable
+ is required, and the third argument is a pointer to a variable to
+ receive the data. If the third argument is NULL, the first argument is
+ ignored, and the function returns the size in bytes of the variable
that is required for the information requested. Otherwise, the yield of
the function is zero for success, or one of the following negative num-
bers:
@@ -1804,9 +1806,9 @@
PCRE2_ERROR_BADOPTION the value of what was invalid
PCRE2_ERROR_UNSET the requested field is not set
- The "magic number" is placed at the start of each compiled pattern as
- an simple check against passing an arbitrary memory pointer. Here is a
- typical call of pcre2_pattern_info(), to obtain the length of the com-
+ The "magic number" is placed at the start of each compiled pattern as
+ an simple check against passing an arbitrary memory pointer. Here is a
+ typical call of pcre2_pattern_info(), to obtain the length of the com-
piled pattern:
int rc;
@@ -1823,19 +1825,19 @@
PCRE2_INFO_ARGOPTIONS
Return a copy of the pattern's options. The third argument should point
- to a uint32_t variable. PCRE2_INFO_ARGOPTIONS returns exactly the
- options that were passed to pcre2_compile(), whereas PCRE2_INFO_ALLOP-
- TIONS returns the compile options as modified by any top-level (*XXX)
+ to a uint32_t variable. PCRE2_INFO_ARGOPTIONS returns exactly the
+ options that were passed to pcre2_compile(), whereas PCRE2_INFO_ALLOP-
+ TIONS returns the compile options as modified by any top-level (*XXX)
option settings such as (*UTF) at the start of the pattern itself.
- For example, if the pattern /(*UTF)abc/ is compiled with the
- PCRE2_EXTENDED option, the result for PCRE2_INFO_ALLOPTIONS is
- PCRE2_EXTENDED and PCRE2_UTF. Option settings such as (?i) that can
- change within a pattern do not affect the result of PCRE2_INFO_ALLOP-
+ For example, if the pattern /(*UTF)abc/ is compiled with the
+ PCRE2_EXTENDED option, the result for PCRE2_INFO_ALLOPTIONS is
+ PCRE2_EXTENDED and PCRE2_UTF. Option settings such as (?i) that can
+ change within a pattern do not affect the result of PCRE2_INFO_ALLOP-
TIONS, even if they appear right at the start of the pattern. (This was
different in some earlier releases.)
- A pattern compiled without PCRE2_ANCHORED is automatically anchored by
+ A pattern compiled without PCRE2_ANCHORED is automatically anchored by
PCRE2 if the first significant item in every top-level branch is one of
the following:
@@ -1844,7 +1846,7 @@
\G always
.* sometimes - see below
- When .* is the first significant item, anchoring is possible only when
+ When .* is the first significant item, anchoring is possible only when
all the following are true:
.* is not in an atomic group
@@ -1854,18 +1856,18 @@
Neither (*PRUNE) nor (*SKIP) appears in the pattern
PCRE2_NO_DOTSTAR_ANCHOR is not set
- For patterns that are auto-anchored, the PCRE2_ANCHORED bit is set in
+ For patterns that are auto-anchored, the PCRE2_ANCHORED bit is set in
the options returned for PCRE2_INFO_ALLOPTIONS.
PCRE2_INFO_BACKREFMAX
- Return the number of the highest back reference in the pattern. The
- third argument should point to an uint32_t variable. Named subpatterns
- acquire numbers as well as names, and these count towards the highest
- back reference. Back references such as \4 or \g{12} match the cap-
- tured characters of the given group, but in addition, the check that a
+ Return the number of the highest back reference in the pattern. The
+ third argument should point to an uint32_t variable. Named subpatterns
+ acquire numbers as well as names, and these count towards the highest
+ back reference. Back references such as \4 or \g{12} match the cap-
+ tured characters of the given group, but in addition, the check that a
capturing group is set in a conditional subpattern such as (?(3)a|b) is
- also a back reference. Zero is returned if there are no back refer-
+ also a back reference. Zero is returned if there are no back refer-
ences.
PCRE2_INFO_BSR
@@ -1872,54 +1874,54 @@
The output is a uint32_t whose value indicates what character sequences
the \R escape sequence matches. A value of PCRE2_BSR_UNICODE means that
- \R matches any Unicode line ending sequence; a value of PCRE2_BSR_ANY-
+ \R matches any Unicode line ending sequence; a value of PCRE2_BSR_ANY-
CRLF means that \R matches only CR, LF, or CRLF.
PCRE2_INFO_CAPTURECOUNT
- Return the highest capturing subpattern number in the pattern. In pat-
+ Return the highest capturing subpattern number in the pattern. In pat-
terns where (?| is not used, this is also the total number of capturing
subpatterns. The third argument should point to an uint32_t variable.
PCRE2_INFO_DEPTHLIMIT
- If the pattern set a backtracking depth limit by including an item of
- the form (*LIMIT_DEPTH=nnnn) at the start, the value is returned. The
- third argument should point to an unsigned 32-bit integer. If no such
- value has been set, the call to pcre2_pattern_info() returns the error
+ If the pattern set a backtracking depth limit by including an item of
+ the form (*LIMIT_DEPTH=nnnn) at the start, the value is returned. The
+ third argument should point to an unsigned 32-bit integer. If no such
+ value has been set, the call to pcre2_pattern_info() returns the error
PCRE2_ERROR_UNSET. Note that this limit will only be used during match-
- ing if it is less than the limit set or defaulted by the caller of the
+ ing if it is less than the limit set or defaulted by the caller of the
match function.
PCRE2_INFO_FIRSTBITMAP
- In the absence of a single first code unit for a non-anchored pattern,
- pcre2_compile() may construct a 256-bit table that defines a fixed set
- of values for the first code unit in any match. For example, a pattern
- that starts with [abc] results in a table with three bits set. When
- code unit values greater than 255 are supported, the flag bit for 255
- means "any code unit of value 255 or above". If such a table was con-
- structed, a pointer to it is returned. Otherwise NULL is returned. The
+ In the absence of a single first code unit for a non-anchored pattern,
+ pcre2_compile() may construct a 256-bit table that defines a fixed set
+ of values for the first code unit in any match. For example, a pattern
+ that starts with [abc] results in a table with three bits set. When
+ code unit values greater than 255 are supported, the flag bit for 255
+ means "any code unit of value 255 or above". If such a table was con-
+ structed, a pointer to it is returned. Otherwise NULL is returned. The
third argument should point to an const uint8_t * variable.
PCRE2_INFO_FIRSTCODETYPE
Return information about the first code unit of any matched string, for
- a non-anchored pattern. The third argument should point to an uint32_t
- variable. If there is a fixed first value, for example, the letter "c"
- from a pattern such as (cat|cow|coyote), 1 is returned, and the value
- can be retrieved using PCRE2_INFO_FIRSTCODEUNIT. If there is no fixed
- first value, but it is known that a match can occur only at the start
- of the subject or following a newline in the subject, 2 is returned.
+ a non-anchored pattern. The third argument should point to an uint32_t
+ variable. If there is a fixed first value, for example, the letter "c"
+ from a pattern such as (cat|cow|coyote), 1 is returned, and the value
+ can be retrieved using PCRE2_INFO_FIRSTCODEUNIT. If there is no fixed
+ first value, but it is known that a match can occur only at the start
+ of the subject or following a newline in the subject, 2 is returned.
Otherwise, and for anchored patterns, 0 is returned.
PCRE2_INFO_FIRSTCODEUNIT
- Return the value of the first code unit of any matched string for a
- pattern where PCRE2_INFO_FIRSTCODETYPE returns 1; otherwise return 0.
- The third argument should point to an uint32_t variable. In the 8-bit
- library, the value is always less than 256. In the 16-bit library the
- value can be up to 0xffff. In the 32-bit library in UTF-32 mode the
+ Return the value of the first code unit of any matched string for a
+ pattern where PCRE2_INFO_FIRSTCODETYPE returns 1; otherwise return 0.
+ The third argument should point to an uint32_t variable. In the 8-bit
+ library, the value is always less than 256. In the 16-bit library the
+ value can be up to 0xffff. In the 32-bit library in UTF-32 mode the
value can be up to 0x10ffff, and up to 0xffffffff when not using UTF-32
mode.
@@ -1926,23 +1928,23 @@
PCRE2_INFO_FRAMESIZE
Return the size (in bytes) of the data frames that are used to remember
- backtracking positions when the pattern is processed by pcre2_match()
- without the use of JIT. The third argument should point to an size_t
+ backtracking positions when the pattern is processed by pcre2_match()
+ without the use of JIT. The third argument should point to an size_t
variable. The frame size depends on the number of capturing parentheses
- in the pattern. Each additional capturing group adds two PCRE2_SIZE
+ in the pattern. Each additional capturing group adds two PCRE2_SIZE
variables.
PCRE2_INFO_HASBACKSLASHC
- Return 1 if the pattern contains any instances of \C, otherwise 0. The
+ Return 1 if the pattern contains any instances of \C, otherwise 0. The
third argument should point to an uint32_t variable.
PCRE2_INFO_HASCRORLF
- Return 1 if the pattern contains any explicit matches for CR or LF
+ Return 1 if the pattern contains any explicit matches for CR or LF
characters, otherwise 0. The third argument should point to an uint32_t
- variable. An explicit match is either a literal CR or LF character, or
- \r or \n or one of the equivalent hexadecimal or octal escape
+ variable. An explicit match is either a literal CR or LF character, or
+ \r or \n or one of the equivalent hexadecimal or octal escape
sequences.
PCRE2_INFO_HEAPLIMIT
@@ -1949,83 +1951,83 @@
If the pattern set a heap memory limit by including an item of the form
(*LIMIT_HEAP=nnnn) at the start, the value is returned. The third argu-
- ment should point to an unsigned 32-bit integer. If no such value has
- been set, the call to pcre2_pattern_info() returns the error
+ ment should point to an unsigned 32-bit integer. If no such value has
+ been set, the call to pcre2_pattern_info() returns the error
PCRE2_ERROR_UNSET. Note that this limit will only be used during match-
- ing if it is less than the limit set or defaulted by the caller of the
+ ing if it is less than the limit set or defaulted by the caller of the
match function.
PCRE2_INFO_JCHANGED
- Return 1 if the (?J) or (?-J) option setting is used in the pattern,
- otherwise 0. The third argument should point to an uint32_t variable.
- (?J) and (?-J) set and unset the local PCRE2_DUPNAMES option, respec-
+ Return 1 if the (?J) or (?-J) option setting is used in the pattern,
+ otherwise 0. The third argument should point to an uint32_t variable.
+ (?J) and (?-J) set and unset the local PCRE2_DUPNAMES option, respec-
tively.
PCRE2_INFO_JITSIZE
- If the compiled pattern was successfully processed by pcre2_jit_com-
- pile(), return the size of the JIT compiled code, otherwise return
+ If the compiled pattern was successfully processed by pcre2_jit_com-
+ pile(), return the size of the JIT compiled code, otherwise return
zero. The third argument should point to a size_t variable.
PCRE2_INFO_LASTCODETYPE
- Returns 1 if there is a rightmost literal code unit that must exist in
- any matched string, other than at its start. The third argument should
- point to an uint32_t variable. If there is no such value, 0 is
- returned. When 1 is returned, the code unit value itself can be
- retrieved using PCRE2_INFO_LASTCODEUNIT. For anchored patterns, a last
- literal value is recorded only if it follows something of variable
- length. For example, for the pattern /^a\d+z\d+/ the returned value is
- 1 (with "z" returned from PCRE2_INFO_LASTCODEUNIT), but for /^a\dz\d/
+ Returns 1 if there is a rightmost literal code unit that must exist in
+ any matched string, other than at its start. The third argument should
+ point to an uint32_t variable. If there is no such value, 0 is
+ returned. When 1 is returned, the code unit value itself can be
+ retrieved using PCRE2_INFO_LASTCODEUNIT. For anchored patterns, a last
+ literal value is recorded only if it follows something of variable
+ length. For example, for the pattern /^a\d+z\d+/ the returned value is
+ 1 (with "z" returned from PCRE2_INFO_LASTCODEUNIT), but for /^a\dz\d/
the returned value is 0.
PCRE2_INFO_LASTCODEUNIT
- Return the value of the rightmost literal code unit that must exist in
- any matched string, other than at its start, for a pattern where
+ Return the value of the rightmost literal code unit that must exist in
+ any matched string, other than at its start, for a pattern where
PCRE2_INFO_LASTCODETYPE returns 1. Otherwise, return 0. The third argu-
ment should point to an uint32_t variable.
PCRE2_INFO_MATCHEMPTY
- Return 1 if the pattern might match an empty string, otherwise 0. The
- third argument should point to an uint32_t variable. When a pattern
+ Return 1 if the pattern might match an empty string, otherwise 0. The
+ third argument should point to an uint32_t variable. When a pattern
contains recursive subroutine calls it is not always possible to deter-
- mine whether or not it can match an empty string. PCRE2 takes a cau-
+ mine whether or not it can match an empty string. PCRE2 takes a cau-
tious approach and returns 1 in such cases.
PCRE2_INFO_MATCHLIMIT
- If the pattern set a match limit by including an item of the form
- (*LIMIT_MATCH=nnnn) at the start, the value is returned. The third
- argument should point to an unsigned 32-bit integer. If no such value
- has been set, the call to pcre2_pattern_info() returns the error
+ If the pattern set a match limit by including an item of the form
+ (*LIMIT_MATCH=nnnn) at the start, the value is returned. The third
+ argument should point to an unsigned 32-bit integer. If no such value
+ has been set, the call to pcre2_pattern_info() returns the error
PCRE2_ERROR_UNSET. Note that this limit will only be used during match-
- ing if it is less than the limit set or defaulted by the caller of the
+ ing if it is less than the limit set or defaulted by the caller of the
match function.
PCRE2_INFO_MAXLOOKBEHIND
Return the number of characters (not code units) in the longest lookbe-
- hind assertion in the pattern. The third argument should point to an
- unsigned 32-bit integer. This information is useful when doing multi-
- segment matching using the partial matching facilities. Note that the
+ hind assertion in the pattern. The third argument should point to an
+ unsigned 32-bit integer. This information is useful when doing multi-
+ segment matching using the partial matching facilities. Note that the
simple assertions \b and \B require a one-character lookbehind. \A also
- registers a one-character lookbehind, though it does not actually
- inspect the previous character. This is to ensure that at least one
- character from the old segment is retained when a new segment is pro-
+ registers a one-character lookbehind, though it does not actually
+ inspect the previous character. This is to ensure that at least one
+ character from the old segment is retained when a new segment is pro-
cessed. Otherwise, if there are no lookbehinds in the pattern, \A might
match incorrectly at the start of a second or subsequent segment.
PCRE2_INFO_MINLENGTH
- If a minimum length for matching subject strings was computed, its
- value is returned. Otherwise the returned value is 0. The value is a
- number of characters, which in UTF mode may be different from the num-
- ber of code units. The third argument should point to an uint32_t
- variable. The value is a lower bound to the length of any matching
- string. There may not be any strings of that length that do actually
+ If a minimum length for matching subject strings was computed, its
+ value is returned. Otherwise the returned value is 0. The value is a
+ number of characters, which in UTF mode may be different from the num-
+ ber of code units. The third argument should point to an uint32_t
+ variable. The value is a lower bound to the length of any matching
+ string. There may not be any strings of that length that do actually
match, but every string that does match is at least that long.
PCRE2_INFO_NAMECOUNT
@@ -2033,50 +2035,50 @@
PCRE2_INFO_NAMETABLE
PCRE2 supports the use of named as well as numbered capturing parenthe-
- ses. The names are just an additional way of identifying the parenthe-
+ ses. The names are just an additional way of identifying the parenthe-
ses, which still acquire numbers. Several convenience functions such as
- pcre2_substring_get_byname() are provided for extracting captured sub-
- strings by name. It is also possible to extract the data directly, by
- first converting the name to a number in order to access the correct
- pointers in the output vector (described with pcre2_match() below). To
- do the conversion, you need to use the name-to-number map, which is
+ pcre2_substring_get_byname() are provided for extracting captured sub-
+ strings by name. It is also possible to extract the data directly, by
+ first converting the name to a number in order to access the correct
+ pointers in the output vector (described with pcre2_match() below). To
+ do the conversion, you need to use the name-to-number map, which is
described by these three values.
- The map consists of a number of fixed-size entries. PCRE2_INFO_NAME-
- COUNT gives the number of entries, and PCRE2_INFO_NAMEENTRYSIZE gives
- the size of each entry in code units; both of these return a uint32_t
+ The map consists of a number of fixed-size entries. PCRE2_INFO_NAME-
+ COUNT gives the number of entries, and PCRE2_INFO_NAMEENTRYSIZE gives
+ the size of each entry in code units; both of these return a uint32_t
value. The entry size depends on the length of the longest name.
PCRE2_INFO_NAMETABLE returns a pointer to the first entry of the table.
- This is a PCRE2_SPTR pointer to a block of code units. In the 8-bit
- library, the first two bytes of each entry are the number of the cap-
+ This is a PCRE2_SPTR pointer to a block of code units. In the 8-bit
+ library, the first two bytes of each entry are the number of the cap-
turing parenthesis, most significant byte first. In the 16-bit library,
- the pointer points to 16-bit code units, the first of which contains
- the parenthesis number. In the 32-bit library, the pointer points to
- 32-bit code units, the first of which contains the parenthesis number.
+ the pointer points to 16-bit code units, the first of which contains
+ the parenthesis number. In the 32-bit library, the pointer points to
+ 32-bit code units, the first of which contains the parenthesis number.
The rest of the entry is the corresponding name, zero terminated.
- The names are in alphabetical order. If (?| is used to create multiple
- groups with the same number, as described in the section on duplicate
- subpattern numbers in the pcre2pattern page, the groups may be given
- the same name, but there is only one entry in the table. Different
+ The names are in alphabetical order. If (?| is used to create multiple
+ groups with the same number, as described in the section on duplicate
+ subpattern numbers in the pcre2pattern page, the groups may be given
+ the same name, but there is only one entry in the table. Different
names for groups of the same number are not permitted.
- Duplicate names for subpatterns with different numbers are permitted,
- but only if PCRE2_DUPNAMES is set. They appear in the table in the
- order in which they were found in the pattern. In the absence of (?|
- this is the order of increasing number; when (?| is used this is not
+ Duplicate names for subpatterns with different numbers are permitted,
+ but only if PCRE2_DUPNAMES is set. They appear in the table in the
+ order in which they were found in the pattern. In the absence of (?|
+ this is the order of increasing number; when (?| is used this is not
necessarily the case because later subpatterns may have lower numbers.
- As a simple example of the name/number table, consider the following
- pattern after compilation by the 8-bit library (assume PCRE2_EXTENDED
+ As a simple example of the name/number table, consider the following
+ pattern after compilation by the 8-bit library (assume PCRE2_EXTENDED
is set, so white space - including newlines - is ignored):
(?<date> (?<year>(\d\d)?\d\d) -
(?<month>\d\d) - (?<day>\d\d) )
- There are four named subpatterns, so the table has four entries, and
- each entry in the table is eight bytes long. The table is as follows,
+ There are four named subpatterns, so the table has four entries, and
+ each entry in the table is eight bytes long. The table is as follows,
with non-printing bytes shows in hexadecimal, and undefined bytes shown
as ??:
@@ -2085,8 +2087,8 @@
00 04 m o n t h 00
00 02 y e a r 00 ??
- When writing code to extract data from named subpatterns using the
- name-to-number map, remember that the length of the entries is likely
+ When writing code to extract data from named subpatterns using the
+ name-to-number map, remember that the length of the entries is likely
to be different for each compiled pattern.
PCRE2_INFO_NEWLINE
@@ -2098,6 +2100,7 @@
PCRE2_NEWLINE_CRLF Carriage return, linefeed (CRLF)
PCRE2_NEWLINE_ANY Any Unicode line ending
PCRE2_NEWLINE_ANYCRLF Any of CR, LF, or CRLF
+ PCRE2_NEWLINE_NUL The NUL character (binary zero)
This identifies the character sequence that will be recognized as mean-
ing "newline" while matching.
@@ -2104,14 +2107,14 @@
PCRE2_INFO_SIZE
- Return the size of the compiled pattern in bytes (for all three
- libraries). The third argument should point to a size_t variable. This
- value includes the size of the general data block that precedes the
- code units of the compiled pattern itself. The value that is used when
- pcre2_compile() is getting memory in which to place the compiled pat-
- tern may be slightly larger than the value returned by this option,
- because there are cases where the code that calculates the size has to
- over-estimate. Processing a pattern with the JIT compiler does not
+ Return the size of the compiled pattern in bytes (for all three
+ libraries). The third argument should point to a size_t variable. This
+ value includes the size of the general data block that precedes the
+ code units of the compiled pattern itself. The value that is used when
+ pcre2_compile() is getting memory in which to place the compiled pat-
+ tern may be slightly larger than the value returned by this option,
+ because there are cases where the code that calculates the size has to
+ over-estimate. Processing a pattern with the JIT compiler does not
alter the value returned by this option.
@@ -2122,22 +2125,22 @@
void *user_data);
A script language that supports the use of string arguments in callouts
- might like to scan all the callouts in a pattern before running the
+ might like to scan all the callouts in a pattern before running the
match. This can be done by calling pcre2_callout_enumerate(). The first
- argument is a pointer to a compiled pattern, the second points to a
- callback function, and the third is arbitrary user data. The callback
- function is called for every callout in the pattern in the order in
+ argument is a pointer to a compiled pattern, the second points to a
+ callback function, and the third is arbitrary user data. The callback
+ function is called for every callout in the pattern in the order in
which they appear. Its first argument is a pointer to a callout enumer-
- ation block, and its second argument is the user_data value that was
- passed to pcre2_callout_enumerate(). The contents of the callout enu-
- meration block are described in the pcre2callout documentation, which
+ ation block, and its second argument is the user_data value that was
+ passed to pcre2_callout_enumerate(). The contents of the callout enu-
+ meration block are described in the pcre2callout documentation, which
also gives further details about callouts.
SERIALIZATION AND PRECOMPILING
- It is possible to save compiled patterns on disc or elsewhere, and
- reload them later, subject to a number of restrictions. The functions
+ It is possible to save compiled patterns on disc or elsewhere, and
+ reload them later, subject to a number of restrictions. The functions
whose names begin with pcre2_serialize_ are used for this purpose. They
are described in the pcre2serialize documentation.
@@ -2152,56 +2155,56 @@
void pcre2_match_data_free(pcre2_match_data *match_data);
- Information about a successful or unsuccessful match is placed in a
- match data block, which is an opaque structure that is accessed by
- function calls. In particular, the match data block contains a vector
- of offsets into the subject string that define the matched part of the
- subject and any substrings that were captured. This is known as the
+ Information about a successful or unsuccessful match is placed in a
+ match data block, which is an opaque structure that is accessed by
+ function calls. In particular, the match data block contains a vector
+ of offsets into the subject string that define the matched part of the
+ subject and any substrings that were captured. This is known as the
ovector.
- Before calling pcre2_match(), pcre2_dfa_match(), or pcre2_jit_match()
+ Before calling pcre2_match(), pcre2_dfa_match(), or pcre2_jit_match()
you must create a match data block by calling one of the creation func-
- tions above. For pcre2_match_data_create(), the first argument is the
- number of pairs of offsets in the ovector. One pair of offsets is
+ tions above. For pcre2_match_data_create(), the first argument is the
+ number of pairs of offsets in the ovector. One pair of offsets is
required to identify the string that matched the whole pattern, with an
- additional pair for each captured substring. For example, a value of 4
- creates enough space to record the matched portion of the subject plus
- three captured substrings. A minimum of at least 1 pair is imposed by
+ additional pair for each captured substring. For example, a value of 4
+ creates enough space to record the matched portion of the subject plus
+ three captured substrings. A minimum of at least 1 pair is imposed by
pcre2_match_data_create(), so it is always possible to return the over-
all matched string.
The second argument of pcre2_match_data_create() is a pointer to a gen-
- eral context, which can specify custom memory management for obtaining
+ eral context, which can specify custom memory management for obtaining
the memory for the match data block. If you are not using custom memory
management, pass NULL, which causes malloc() to be used.
- For pcre2_match_data_create_from_pattern(), the first argument is a
+ For pcre2_match_data_create_from_pattern(), the first argument is a
pointer to a compiled pattern. The ovector is created to be exactly the
right size to hold all the substrings a pattern might capture. The sec-
- ond argument is again a pointer to a general context, but in this case
+ ond argument is again a pointer to a general context, but in this case
if NULL is passed, the memory is obtained using the same allocator that
was used for the compiled pattern (custom or default).
- A match data block can be used many times, with the same or different
- compiled patterns. You can extract information from a match data block
+ A match data block can be used many times, with the same or different
+ compiled patterns. You can extract information from a match data block
after a match operation has finished, using functions that are
- described in the sections on matched strings and other match data
+ described in the sections on matched strings and other match data
below.
- When a call of pcre2_match() fails, valid data is available in the
- match block only when the error is PCRE2_ERROR_NOMATCH,
- PCRE2_ERROR_PARTIAL, or one of the error codes for an invalid UTF
+ When a call of pcre2_match() fails, valid data is available in the
+ match block only when the error is PCRE2_ERROR_NOMATCH,
+ PCRE2_ERROR_PARTIAL, or one of the error codes for an invalid UTF
string. Exactly what is available depends on the error, and is detailed
below.
- When one of the matching functions is called, pointers to the compiled
- pattern and the subject string are set in the match data block so that
- they can be referenced by the extraction functions. After running a
- match, you must not free a compiled pattern or a subject string until
- after all operations on the match data block (for that match) have
+ When one of the matching functions is called, pointers to the compiled
+ pattern and the subject string are set in the match data block so that
+ they can be referenced by the extraction functions. After running a
+ match, you must not free a compiled pattern or a subject string until
+ after all operations on the match data block (for that match) have
taken place.
- When a match data block itself is no longer needed, it should be freed
+ When a match data block itself is no longer needed, it should be freed
by calling pcre2_match_data_free().
@@ -2212,15 +2215,15 @@
uint32_t options, pcre2_match_data *match_data,
pcre2_match_context *mcontext);
- The function pcre2_match() is called to match a subject string against
- a compiled pattern, which is passed in the code argument. You can call
+ The function pcre2_match() is called to match a subject string against
+ a compiled pattern, which is passed in the code argument. You can call
pcre2_match() with the same code argument as many times as you like, in
- order to find multiple matches in the subject string or to match dif-
+ order to find multiple matches in the subject string or to match dif-
ferent subject strings with the same pattern.
- This function is the main matching facility of the library, and it
- operates in a Perl-like manner. For specialist use there is also an
- alternative matching function, which is described below in the section
+ This function is the main matching facility of the library, and it
+ operates in a Perl-like manner. For specialist use there is also an
+ alternative matching function, which is described below in the section
about the pcre2_dfa_match() function.
Here is an example of a simple call to pcre2_match():
@@ -2235,7 +2238,7 @@
match_data, /* the match data block */
NULL); /* a match context; NULL means use defaults */
- If the subject string is zero-terminated, the length can be given as
+ If the subject string is zero-terminated, the length can be given as
PCRE2_ZERO_TERMINATED. A match context must be provided if certain less
common matching parameters are to be changed. For details, see the sec-
tion on the match context above.
@@ -2242,92 +2245,92 @@
The string to be matched by pcre2_match()
- The subject string is passed to pcre2_match() as a pointer in subject,
- a length in length, and a starting offset in startoffset. The length
- and offset are in code units, not characters. That is, they are in
- bytes for the 8-bit library, 16-bit code units for the 16-bit library,
- and 32-bit code units for the 32-bit library, whether or not UTF pro-
+ The subject string is passed to pcre2_match() as a pointer in subject,
+ a length in length, and a starting offset in startoffset. The length
+ and offset are in code units, not characters. That is, they are in
+ bytes for the 8-bit library, 16-bit code units for the 16-bit library,
+ and 32-bit code units for the 32-bit library, whether or not UTF pro-
cessing is enabled.
If startoffset is greater than the length of the subject, pcre2_match()
- returns PCRE2_ERROR_BADOFFSET. When the starting offset is zero, the
- search for a match starts at the beginning of the subject, and this is
+ returns PCRE2_ERROR_BADOFFSET. When the starting offset is zero, the
+ search for a match starts at the beginning of the subject, and this is
by far the most common case. In UTF-8 or UTF-16 mode, the starting off-
- set must point to the start of a character, or to the end of the sub-
- ject (in UTF-32 mode, one code unit equals one character, so all off-
- sets are valid). Like the pattern string, the subject may contain
+ set must point to the start of a character, or to the end of the sub-
+ ject (in UTF-32 mode, one code unit equals one character, so all off-
+ sets are valid). Like the pattern string, the subject may contain
binary zeroes.
- A non-zero starting offset is useful when searching for another match
- in the same subject by calling pcre2_match() again after a previous
- success. Setting startoffset differs from passing over a shortened
- string and setting PCRE2_NOTBOL in the case of a pattern that begins
+ A non-zero starting offset is useful when searching for another match
+ in the same subject by calling pcre2_match() again after a previous
+ success. Setting startoffset differs from passing over a shortened
+ string and setting PCRE2_NOTBOL in the case of a pattern that begins
with any kind of lookbehind. For example, consider the pattern
\Biss\B
- which finds occurrences of "iss" in the middle of words. (\B matches
- only if the current position in the subject is not a word boundary.)
+ which finds occurrences of "iss" in the middle of words. (\B matches
+ only if the current position in the subject is not a word boundary.)
When applied to the string "Mississipi" the first call to pcre2_match()
- finds the first occurrence. If pcre2_match() is called again with just
- the remainder of the subject, namely "issipi", it does not match,
+ finds the first occurrence. If pcre2_match() is called again with just
+ the remainder of the subject, namely "issipi", it does not match,
because \B is always false at the start of the subject, which is deemed
- to be a word boundary. However, if pcre2_match() is passed the entire
+ to be a word boundary. However, if pcre2_match() is passed the entire
string again, but with startoffset set to 4, it finds the second occur-
- rence of "iss" because it is able to look behind the starting point to
+ rence of "iss" because it is able to look behind the starting point to
discover that it is preceded by a letter.
- Finding all the matches in a subject is tricky when the pattern can
+ Finding all the matches in a subject is tricky when the pattern can
match an empty string. It is possible to emulate Perl's /g behaviour by
- first trying the match again at the same offset, with the
- PCRE2_NOTEMPTY_ATSTART and PCRE2_ANCHORED options, and then if that
- fails, advancing the starting offset and trying an ordinary match
- again. There is some code that demonstrates how to do this in the
- pcre2demo sample program. In the most general case, you have to check
- to see if the newline convention recognizes CRLF as a newline, and if
- so, and the current character is CR followed by LF, advance the start-
+ first trying the match again at the same offset, with the
+ PCRE2_NOTEMPTY_ATSTART and PCRE2_ANCHORED options, and then if that
+ fails, advancing the starting offset and trying an ordinary match
+ again. There is some code that demonstrates how to do this in the
+ pcre2demo sample program. In the most general case, you have to check
+ to see if the newline convention recognizes CRLF as a newline, and if
+ so, and the current character is CR followed by LF, advance the start-
ing offset by two characters instead of one.
If a non-zero starting offset is passed when the pattern is anchored, a
single attempt to match at the given offset is made. This can only suc-
- ceed if the pattern does not require the match to be at the start of
- the subject. In other words, the anchoring must be the result of set-
- ting the PCRE2_ANCHORED option or the use of .* with PCRE2_DOTALL, not
+ ceed if the pattern does not require the match to be at the start of
+ the subject. In other words, the anchoring must be the result of set-
+ ting the PCRE2_ANCHORED option or the use of .* with PCRE2_DOTALL, not
by starting the pattern with ^ or \A.
Option bits for pcre2_match()
The unused bits of the options argument for pcre2_match() must be zero.
- The only bits that may be set are PCRE2_ANCHORED, PCRE2_ENDANCHORED,
- PCRE2_NOTBOL, PCRE2_NOTEOL, PCRE2_NOTEMPTY, PCRE2_NOTEMPTY_ATSTART,
- PCRE2_NO_JIT, PCRE2_NO_UTF_CHECK, PCRE2_PARTIAL_HARD, and PCRE2_PAR-
+ The only bits that may be set are PCRE2_ANCHORED, PCRE2_ENDANCHORED,
+ PCRE2_NOTBOL, PCRE2_NOTEOL, PCRE2_NOTEMPTY, PCRE2_NOTEMPTY_ATSTART,
+ PCRE2_NO_JIT, PCRE2_NO_UTF_CHECK, PCRE2_PARTIAL_HARD, and PCRE2_PAR-
TIAL_SOFT. Their action is described below.
- Setting PCRE2_ANCHORED or PCRE2_ENDANCHORED at match time is not sup-
- ported by the just-in-time (JIT) compiler. If it is set, JIT matching
- is disabled and the interpretive code in pcre2_match() is run. Apart
- from PCRE2_NO_JIT (obviously), the remaining options are supported for
+ Setting PCRE2_ANCHORED or PCRE2_ENDANCHORED at match time is not sup-
+ ported by the just-in-time (JIT) compiler. If it is set, JIT matching
+ is disabled and the interpretive code in pcre2_match() is run. Apart
+ from PCRE2_NO_JIT (obviously), the remaining options are supported for
JIT matching.
PCRE2_ANCHORED
The PCRE2_ANCHORED option limits pcre2_match() to matching at the first
- matching position. If a pattern was compiled with PCRE2_ANCHORED, or
- turned out to be anchored by virtue of its contents, it cannot be made
- unachored at matching time. Note that setting the option at match time
+ matching position. If a pattern was compiled with PCRE2_ANCHORED, or
+ turned out to be anchored by virtue of its contents, it cannot be made
+ unachored at matching time. Note that setting the option at match time
disables JIT matching.
PCRE2_ENDANCHORED
- If the PCRE2_ENDANCHORED option is set, any string that pcre2_match()
- matches must be right at the end of the subject string. Note that set-
+ If the PCRE2_ENDANCHORED option is set, any string that pcre2_match()
+ matches must be right at the end of the subject string. Note that set-
ting the option at match time disables JIT matching.
PCRE2_NOTBOL
This option specifies that first character of the subject string is not
- the beginning of a line, so the circumflex metacharacter should not
- match before it. Setting this without having set PCRE2_MULTILINE at
+ the beginning of a line, so the circumflex metacharacter should not
+ match before it. Setting this without having set PCRE2_MULTILINE at
compile time causes circumflex never to match. This option affects only
the behaviour of the circumflex metacharacter. It does not affect \A.
@@ -2334,9 +2337,9 @@
PCRE2_NOTEOL
This option specifies that the end of the subject string is not the end
- of a line, so the dollar metacharacter should not match it nor (except
- in multiline mode) a newline immediately before it. Setting this with-
- out having set PCRE2_MULTILINE at compile time causes dollar never to
+ of a line, so the dollar metacharacter should not match it nor (except
+ in multiline mode) a newline immediately before it. Setting this with-
+ out having set PCRE2_MULTILINE at compile time causes dollar never to
match. This option affects only the behaviour of the dollar metacharac-
ter. It does not affect \Z or \z.
@@ -2343,79 +2346,79 @@
PCRE2_NOTEMPTY
An empty string is not considered to be a valid match if this option is
- set. If there are alternatives in the pattern, they are tried. If all
- the alternatives match the empty string, the entire match fails. For
+ set. If there are alternatives in the pattern, they are tried. If all
+ the alternatives match the empty string, the entire match fails. For
example, if the pattern
a?b?
- is applied to a string not beginning with "a" or "b", it matches an
+ is applied to a string not beginning with "a" or "b", it matches an
empty string at the start of the subject. With PCRE2_NOTEMPTY set, this
- match is not valid, so pcre2_match() searches further into the string
+ match is not valid, so pcre2_match() searches further into the string
for occurrences of "a" or "b".
PCRE2_NOTEMPTY_ATSTART
- This is like PCRE2_NOTEMPTY, except that it locks out an empty string
+ This is like PCRE2_NOTEMPTY, except that it locks out an empty string
match only at the first matching position, that is, at the start of the
- subject plus the starting offset. An empty string match later in the
- subject is permitted. If the pattern is anchored, such a match can
+ subject plus the starting offset. An empty string match later in the
+ subject is permitted. If the pattern is anchored, such a match can
occur only if the pattern contains \K.
PCRE2_NO_JIT
- By default, if a pattern has been successfully processed by
- pcre2_jit_compile(), JIT is automatically used when pcre2_match() is
- called with options that JIT supports. Setting PCRE2_NO_JIT disables
+ By default, if a pattern has been successfully processed by
+ pcre2_jit_compile(), JIT is automatically used when pcre2_match() is
+ called with options that JIT supports. Setting PCRE2_NO_JIT disables
the use of JIT; it forces matching to be done by the interpreter.
PCRE2_NO_UTF_CHECK
When PCRE2_UTF is set at compile time, the validity of the subject as a
- UTF string is checked by default when pcre2_match() is subsequently
- called. If a non-zero starting offset is given, the check is applied
- only to that part of the subject that could be inspected during match-
- ing, and there is a check that the starting offset points to the first
- code unit of a character or to the end of the subject. If there are no
- lookbehind assertions in the pattern, the check starts at the starting
- offset. Otherwise, it starts at the length of the longest lookbehind
+ UTF string is checked by default when pcre2_match() is subsequently
+ called. If a non-zero starting offset is given, the check is applied
+ only to that part of the subject that could be inspected during match-
+ ing, and there is a check that the starting offset points to the first
+ code unit of a character or to the end of the subject. If there are no
+ lookbehind assertions in the pattern, the check starts at the starting
+ offset. Otherwise, it starts at the length of the longest lookbehind
before the starting offset, or at the start of the subject if there are
- not that many characters before the starting offset. Note that the
+ not that many characters before the starting offset. Note that the
sequences \b and \B are one-character lookbehinds.
The check is carried out before any other processing takes place, and a
- negative error code is returned if the check fails. There are several
- UTF error codes for each code unit width, corresponding to different
- problems with the code unit sequence. There are discussions about the
- validity of UTF-8 strings, UTF-16 strings, and UTF-32 strings in the
+ negative error code is returned if the check fails. There are several
+ UTF error codes for each code unit width, corresponding to different
+ problems with the code unit sequence. There are discussions about the
+ validity of UTF-8 strings, UTF-16 strings, and UTF-32 strings in the
pcre2unicode page.
- If you know that your subject is valid, and you want to skip these
- checks for performance reasons, you can set the PCRE2_NO_UTF_CHECK
- option when calling pcre2_match(). You might want to do this for the
+ If you know that your subject is valid, and you want to skip these
+ checks for performance reasons, you can set the PCRE2_NO_UTF_CHECK
+ option when calling pcre2_match(). You might want to do this for the
second and subsequent calls to pcre2_match() if you are making repeated
calls to find other matches in the same subject string.
- WARNING: When PCRE2_NO_UTF_CHECK is set, the effect of passing an
- invalid string as a subject, or an invalid value of startoffset, is
+ WARNING: When PCRE2_NO_UTF_CHECK is set, the effect of passing an
+ invalid string as a subject, or an invalid value of startoffset, is
undefined. Your program may crash or loop indefinitely.
PCRE2_PARTIAL_HARD
PCRE2_PARTIAL_SOFT
- These options turn on the partial matching feature. A partial match
- occurs if the end of the subject string is reached successfully, but
- there are not enough subject characters to complete the match. If this
- happens when PCRE2_PARTIAL_SOFT (but not PCRE2_PARTIAL_HARD) is set,
- matching continues by testing any remaining alternatives. Only if no
- complete match can be found is PCRE2_ERROR_PARTIAL returned instead of
- PCRE2_ERROR_NOMATCH. In other words, PCRE2_PARTIAL_SOFT specifies that
- the caller is prepared to handle a partial match, but only if no com-
+ These options turn on the partial matching feature. A partial match
+ occurs if the end of the subject string is reached successfully, but
+ there are not enough subject characters to complete the match. If this
+ happens when PCRE2_PARTIAL_SOFT (but not PCRE2_PARTIAL_HARD) is set,
+ matching continues by testing any remaining alternatives. Only if no
+ complete match can be found is PCRE2_ERROR_PARTIAL returned instead of
+ PCRE2_ERROR_NOMATCH. In other words, PCRE2_PARTIAL_SOFT specifies that
+ the caller is prepared to handle a partial match, but only if no com-
plete match can be found.
- If PCRE2_PARTIAL_HARD is set, it overrides PCRE2_PARTIAL_SOFT. In this
- case, if a partial match is found, pcre2_match() immediately returns
- PCRE2_ERROR_PARTIAL, without considering any other alternatives. In
+ If PCRE2_PARTIAL_HARD is set, it overrides PCRE2_PARTIAL_SOFT. In this
+ case, if a partial match is found, pcre2_match() immediately returns
+ PCRE2_ERROR_PARTIAL, without considering any other alternatives. In
other words, when PCRE2_PARTIAL_HARD is set, a partial match is consid-
ered to be more important that an alternative complete match.
@@ -2425,38 +2428,38 @@
NEWLINE HANDLING WHEN MATCHING
- When PCRE2 is built, a default newline convention is set; this is usu-
- ally the standard convention for the operating system. The default can
- be overridden in a compile context by calling pcre2_set_newline(). It
- can also be overridden by starting a pattern string with, for example,
- (*CRLF), as described in the section on newline conventions in the
- pcre2pattern page. During matching, the newline choice affects the be-
- haviour of the dot, circumflex, and dollar metacharacters. It may also
- alter the way the match starting position is advanced after a match
+ When PCRE2 is built, a default newline convention is set; this is usu-
+ ally the standard convention for the operating system. The default can
+ be overridden in a compile context by calling pcre2_set_newline(). It
+ can also be overridden by starting a pattern string with, for example,
+ (*CRLF), as described in the section on newline conventions in the
+ pcre2pattern page. During matching, the newline choice affects the be-
+ haviour of the dot, circumflex, and dollar metacharacters. It may also
+ alter the way the match starting position is advanced after a match
failure for an unanchored pattern.
When PCRE2_NEWLINE_CRLF, PCRE2_NEWLINE_ANYCRLF, or PCRE2_NEWLINE_ANY is
- set as the newline convention, and a match attempt for an unanchored
+ set as the newline convention, and a match attempt for an unanchored
pattern fails when the current starting position is at a CRLF sequence,
- and the pattern contains no explicit matches for CR or LF characters,
- the match position is advanced by two characters instead of one, in
+ and the pattern contains no explicit matches for CR or LF characters,
+ the match position is advanced by two characters instead of one, in
other words, to after the CRLF.
The above rule is a compromise that makes the most common cases work as
- expected. For example, if the pattern is .+A (and the PCRE2_DOTALL
+ expected. For example, if the pattern is .+A (and the PCRE2_DOTALL
option is not set), it does not match the string "\r\nA" because, after
- failing at the start, it skips both the CR and the LF before retrying.
- However, the pattern [\r\n]A does match that string, because it con-
+ failing at the start, it skips both the CR and the LF before retrying.
+ However, the pattern [\r\n]A does match that string, because it con-
tains an explicit CR or LF reference, and so advances only by one char-
acter after the first failure.
An explicit match for CR of LF is either a literal appearance of one of
- those characters in the pattern, or one of the \r or \n or equivalent
+ those characters in the pattern, or one of the \r or \n or equivalent
octal or hexadecimal escape sequences. Implicit matches such as [^X] do
- not count, nor does \s, even though it includes CR and LF in the char-
+ not count, nor does \s, even though it includes CR and LF in the char-
acters that it matches.
- Notwithstanding the above, anomalous effects may still occur when CRLF
+ Notwithstanding the above, anomalous effects may still occur when CRLF
is a valid newline sequence and explicit \r or \n escapes appear in the
pattern.
@@ -2467,81 +2470,81 @@
PCRE2_SIZE *pcre2_get_ovector_pointer(pcre2_match_data *match_data);
- In general, a pattern matches a certain portion of the subject, and in
- addition, further substrings from the subject may be picked out by
- parenthesized parts of the pattern. Following the usage in Jeffrey
- Friedl's book, this is called "capturing" in what follows, and the
- phrase "capturing subpattern" or "capturing group" is used for a frag-
- ment of a pattern that picks out a substring. PCRE2 supports several
+ In general, a pattern matches a certain portion of the subject, and in
+ addition, further substrings from the subject may be picked out by
+ parenthesized parts of the pattern. Following the usage in Jeffrey
+ Friedl's book, this is called "capturing" in what follows, and the
+ phrase "capturing subpattern" or "capturing group" is used for a frag-
+ ment of a pattern that picks out a substring. PCRE2 supports several
other kinds of parenthesized subpattern that do not cause substrings to
- be captured. The pcre2_pattern_info() function can be used to find out
+ be captured. The pcre2_pattern_info() function can be used to find out
how many capturing subpatterns there are in a compiled pattern.
- You can use auxiliary functions for accessing captured substrings by
+ You can use auxiliary functions for accessing captured substrings by
number or by name, as described in sections below.
Alternatively, you can make direct use of the vector of PCRE2_SIZE val-
- ues, called the ovector, which contains the offsets of captured
- strings. It is part of the match data block. The function
- pcre2_get_ovector_pointer() returns the address of the ovector, and
+ ues, called the ovector, which contains the offsets of captured
+ strings. It is part of the match data block. The function
+ pcre2_get_ovector_pointer() returns the address of the ovector, and
pcre2_get_ovector_count() returns the number of pairs of values it con-
tains.
Within the ovector, the first in each pair of values is set to the off-
set of the first code unit of a substring, and the second is set to the
- offset of the first code unit after the end of a substring. These val-
- ues are always code unit offsets, not character offsets. That is, they
- are byte offsets in the 8-bit library, 16-bit offsets in the 16-bit
+ offset of the first code unit after the end of a substring. These val-
+ ues are always code unit offsets, not character offsets. That is, they
+ are byte offsets in the 8-bit library, 16-bit offsets in the 16-bit
library, and 32-bit offsets in the 32-bit library.
- After a partial match (error return PCRE2_ERROR_PARTIAL), only the
- first pair of offsets (that is, ovector[0] and ovector[1]) are set.
- They identify the part of the subject that was partially matched. See
+ After a partial match (error return PCRE2_ERROR_PARTIAL), only the
+ first pair of offsets (that is, ovector[0] and ovector[1]) are set.
+ They identify the part of the subject that was partially matched. See
the pcre2partial documentation for details of partial matching.
- After a fully successful match, the first pair of offsets identifies
- the portion of the subject string that was matched by the entire pat-
- tern. The next pair is used for the first captured substring, and so
- on. The value returned by pcre2_match() is one more than the highest
- numbered pair that has been set. For example, if two substrings have
- been captured, the returned value is 3. If there are no captured sub-
+ After a fully successful match, the first pair of offsets identifies
+ the portion of the subject string that was matched by the entire pat-
+ tern. The next pair is used for the first captured substring, and so
+ on. The value returned by pcre2_match() is one more than the highest
+ numbered pair that has been set. For example, if two substrings have
+ been captured, the returned value is 3. If there are no captured sub-
strings, the return value from a successful match is 1, indicating that
just the first pair of offsets has been set.
- If a pattern uses the \K escape sequence within a positive assertion,
+ If a pattern uses the \K escape sequence within a positive assertion,
the reported start of a successful match can be greater than the end of
- the match. For example, if the pattern (?=ab\K) is matched against
+ the match. For example, if the pattern (?=ab\K) is matched against
"ab", the start and end offset values for the match are 2 and 0.
- If a capturing subpattern group is matched repeatedly within a single
- match operation, it is the last portion of the subject that it matched
+ If a capturing subpattern group is matched repeatedly within a single
+ match operation, it is the last portion of the subject that it matched
that is returned.
If the ovector is too small to hold all the captured substring offsets,
- as much as possible is filled in, and the function returns a value of
- zero. If captured substrings are not of interest, pcre2_match() may be
+ as much as possible is filled in, and the function returns a value of
+ zero. If captured substrings are not of interest, pcre2_match() may be
called with a match data block whose ovector is of minimum length (that
is, one pair).
- It is possible for capturing subpattern number n+1 to match some part
+ It is possible for capturing subpattern number n+1 to match some part
of the subject when subpattern n has not been used at all. For example,
- if the string "abc" is matched against the pattern (a|(z))(bc) the
+ if the string "abc" is matched against the pattern (a|(z))(bc) the
return from the function is 4, and subpatterns 1 and 3 are matched, but
- 2 is not. When this happens, both values in the offset pairs corre-
+ 2 is not. When this happens, both values in the offset pairs corre-
sponding to unused subpatterns are set to PCRE2_UNSET.
- Offset values that correspond to unused subpatterns at the end of the
- expression are also set to PCRE2_UNSET. For example, if the string
+ Offset values that correspond to unused subpatterns at the end of the
+ expression are also set to PCRE2_UNSET. For example, if the string
"abc" is matched against the pattern (abc)(x(yz)?)? subpatterns 2 and 3
- are not matched. The return from the function is 2, because the high-
+ are not matched. The return from the function is 2, because the high-
est used capturing subpattern number is 1. The offsets for for the sec-
- ond and third capturing subpatterns (assuming the vector is large
+ ond and third capturing subpatterns (assuming the vector is large
enough, of course) are set to PCRE2_UNSET.
Elements in the ovector that do not correspond to capturing parentheses
in the pattern are never changed. That is, if a pattern contains n cap-
turing parentheses, no more than ovector[0] to ovector[2n+1] are set by
- pcre2_match(). The other elements retain whatever values they previ-
+ pcre2_match(). The other elements retain whatever values they previ-
ously had.
@@ -2551,42 +2554,42 @@
PCRE2_SIZE pcre2_get_startchar(pcre2_match_data *match_data);
- As well as the offsets in the ovector, other information about a match
- is retained in the match data block and can be retrieved by the above
- functions in appropriate circumstances. If they are called at other
+ As well as the offsets in the ovector, other information about a match
+ is retained in the match data block and can be retrieved by the above
+ functions in appropriate circumstances. If they are called at other
times, the result is undefined.
- After a successful match, a partial match (PCRE2_ERROR_PARTIAL), or a
- failure to match (PCRE2_ERROR_NOMATCH), a (*MARK) name may be avail-
- able, and pcre2_get_mark() can be called. It returns a pointer to the
- zero-terminated name, which is within the compiled pattern. Otherwise
- NULL is returned. The length of the (*MARK) name (excluding the termi-
- nating zero) is stored in the code unit that preceeds the name. You
- should use this instead of relying on the terminating zero if the
+ After a successful match, a partial match (PCRE2_ERROR_PARTIAL), or a
+ failure to match (PCRE2_ERROR_NOMATCH), a (*MARK) name may be avail-
+ able, and pcre2_get_mark() can be called. It returns a pointer to the
+ zero-terminated name, which is within the compiled pattern. Otherwise
+ NULL is returned. The length of the (*MARK) name (excluding the termi-
+ nating zero) is stored in the code unit that preceeds the name. You
+ should use this instead of relying on the terminating zero if the
(*MARK) name might contain a binary zero.
After a successful match, the (*MARK) name that is returned is the last
- one encountered on the matching path through the pattern. After a "no
- match" or a partial match, the last encountered (*MARK) name is
+ one encountered on the matching path through the pattern. After a "no
+ match" or a partial match, the last encountered (*MARK) name is
returned. For example, consider this pattern:
^(*MARK:A)((*MARK:B)a|b)c
- When it matches "bc", the returned mark is A. The B mark is "seen" in
- the first branch of the group, but it is not on the matching path. On
- the other hand, when this pattern fails to match "bx", the returned
+ When it matches "bc", the returned mark is A. The B mark is "seen" in
+ the first branch of the group, but it is not on the matching path. On
+ the other hand, when this pattern fails to match "bx", the returned
mark is B.
- After a successful match, a partial match, or one of the invalid UTF
- errors (for example, PCRE2_ERROR_UTF8_ERR5), pcre2_get_startchar() can
+ After a successful match, a partial match, or one of the invalid UTF
+ errors (for example, PCRE2_ERROR_UTF8_ERR5), pcre2_get_startchar() can
be called. After a successful or partial match it returns the code unit
- offset of the character at which the match started. For a non-partial
- match, this can be different to the value of ovector[0] if the pattern
- contains the \K escape sequence. After a partial match, however, this
- value is always the same as ovector[0] because \K does not affect the
+ offset of the character at which the match started. For a non-partial
+ match, this can be different to the value of ovector[0] if the pattern
+ contains the \K escape sequence. After a partial match, however, this
+ value is always the same as ovector[0] because \K does not affect the
result of a partial match.
- After a UTF check failure, pcre2_get_startchar() can be used to obtain
+ After a UTF check failure, pcre2_get_startchar() can be used to obtain
the code unit offset of the invalid UTF character. Details are given in
the pcre2unicode page.
@@ -2593,14 +2596,14 @@
ERROR RETURNS FROM pcre2_match()
- If pcre2_match() fails, it returns a negative number. This can be con-
- verted to a text string by calling the pcre2_get_error_message() func-
- tion (see "Obtaining a textual error message" below). Negative error
- codes are also returned by other functions, and are documented with
- them. The codes are given names in the header file. If UTF checking is
+ If pcre2_match() fails, it returns a negative number. This can be con-
+ verted to a text string by calling the pcre2_get_error_message() func-
+ tion (see "Obtaining a textual error message" below). Negative error
+ codes are also returned by other functions, and are documented with
+ them. The codes are given names in the header file. If UTF checking is
in force and an invalid UTF subject string is detected, one of a number
- of UTF-specific negative error codes is returned. Details are given in
- the pcre2unicode page. The following are the other errors that may be
+ of UTF-specific negative error codes is returned. Details are given in
+ the pcre2unicode page. The following are the other errors that may be
returned by pcre2_match():
PCRE2_ERROR_NOMATCH
@@ -2609,20 +2612,20 @@
PCRE2_ERROR_PARTIAL
- The subject string did not match, but it did match partially. See the
+ The subject string did not match, but it did match partially. See the
pcre2partial documentation for details of partial matching.
PCRE2_ERROR_BADMAGIC
PCRE2 stores a 4-byte "magic number" at the start of the compiled code,
- to catch the case when it is passed a junk pointer. This is the error
+ to catch the case when it is passed a junk pointer. This is the error
that is returned when the magic number is not present.
PCRE2_ERROR_BADMODE
- This error is given when a compiled pattern is passed to a function in
- a library of a different code unit width, for example, a pattern com-
- piled by the 8-bit library is passed to a 16-bit or 32-bit library
+ This error is given when a compiled pattern is passed to a function in
+ a library of a different code unit width, for example, a pattern com-
+ piled by the 8-bit library is passed to a 16-bit or 32-bit library
function.
PCRE2_ERROR_BADOFFSET
@@ -2636,15 +2639,15 @@
PCRE2_ERROR_BADUTFOFFSET
The UTF code unit sequence that was passed as a subject was checked and
- found to be valid (the PCRE2_NO_UTF_CHECK option was not set), but the
- value of startoffset did not point to the beginning of a UTF character
+ found to be valid (the PCRE2_NO_UTF_CHECK option was not set), but the
+ value of startoffset did not point to the beginning of a UTF character
or the end of the subject.
PCRE2_ERROR_CALLOUT
- This error is never generated by pcre2_match() itself. It is provided
- for use by callout functions that want to cause pcre2_match() or
- pcre2_callout_enumerate() to return a distinctive error code. See the
+ This error is never generated by pcre2_match() itself. It is provided
+ for use by callout functions that want to cause pcre2_match() or
+ pcre2_callout_enumerate() to return a distinctive error code. See the
pcre2callout documentation for details.
PCRE2_ERROR_DEPTHLIMIT
@@ -2657,14 +2660,14 @@
PCRE2_ERROR_INTERNAL
- An unexpected internal error has occurred. This error could be caused
+ An unexpected internal error has occurred. This error could be caused
by a bug in PCRE2 or by overwriting of the compiled pattern.
PCRE2_ERROR_JIT_STACKLIMIT
- This error is returned when a pattern that was successfully studied
- using JIT is being matched, but the memory available for the just-in-
- time processing stack is not large enough. See the pcre2jit documenta-
+ This error is returned when a pattern that was successfully studied
+ using JIT is being matched, but the memory available for the just-in-
+ time processing stack is not large enough. See the pcre2jit documenta-
tion for more details.
PCRE2_ERROR_MATCHLIMIT
@@ -2673,10 +2676,10 @@
PCRE2_ERROR_NOMEMORY
- If a pattern contains many nested backtracking points, heap memory is
- used to remember them. This error is given when the memory allocation
- function (default or custom) fails. Note that a different error,
- PCRE2_ERROR_HEAPLIMIT, is given if the amount of memory needed exceeds
+ If a pattern contains many nested backtracking points, heap memory is
+ used to remember them. This error is given when the memory allocation
+ function (default or custom) fails. Note that a different error,
+ PCRE2_ERROR_HEAPLIMIT, is given if the amount of memory needed exceeds
the heap limit.
PCRE2_ERROR_NULL
@@ -2685,12 +2688,12 @@
PCRE2_ERROR_RECURSELOOP
- This error is returned when pcre2_match() detects a recursion loop
- within the pattern. Specifically, it means that either the whole pat-
+ This error is returned when pcre2_match() detects a recursion loop
+ within the pattern. Specifically, it means that either the whole pat-
tern or a subpattern has been called recursively for the second time at
- the same position in the subject string. Some simple patterns that
- might do this are detected and faulted at compile time, but more com-
- plicated cases, in particular mutual recursions between two different
+ the same position in the subject string. Some simple patterns that
+ might do this are detected and faulted at compile time, but more com-
+ plicated cases, in particular mutual recursions between two different
subpatterns, cannot be detected until matching is attempted.
@@ -2699,20 +2702,20 @@
int pcre2_get_error_message(int errorcode, PCRE2_UCHAR *buffer,
PCRE2_SIZE bufflen);
- A text message for an error code from any PCRE2 function (compile,
- match, or auxiliary) can be obtained by calling pcre2_get_error_mes-
- sage(). The code is passed as the first argument, with the remaining
- two arguments specifying a code unit buffer and its length in code
- units, into which the text message is placed. The message is returned
- in code units of the appropriate width for the library that is being
+ A text message for an error code from any PCRE2 function (compile,
+ match, or auxiliary) can be obtained by calling pcre2_get_error_mes-
+ sage(). The code is passed as the first argument, with the remaining
+ two arguments specifying a code unit buffer and its length in code
+ units, into which the text message is placed. The message is returned
+ in code units of the appropriate width for the library that is being
used.
- The returned message is terminated with a trailing zero, and the func-
- tion returns the number of code units used, excluding the trailing
+ The returned message is terminated with a trailing zero, and the func-
+ tion returns the number of code units used, excluding the trailing
zero. If the error number is unknown, the negative error code
- PCRE2_ERROR_BADDATA is returned. If the buffer is too small, the mes-
- sage is truncated (but still with a trailing zero), and the negative
- error code PCRE2_ERROR_NOMEMORY is returned. None of the messages are
+ PCRE2_ERROR_BADDATA is returned. If the buffer is too small, the mes-
+ sage is truncated (but still with a trailing zero), and the negative
+ error code PCRE2_ERROR_NOMEMORY is returned. None of the messages are
very long; a buffer size of 120 code units is ample.
@@ -2731,39 +2734,39 @@
void pcre2_substring_free(PCRE2_UCHAR *buffer);
- Captured substrings can be accessed directly by using the ovector as
+ Captured substrings can be accessed directly by using the ovector as
described above. For convenience, auxiliary functions are provided for
- extracting captured substrings as new, separate, zero-terminated
+ extracting captured substrings as new, separate, zero-terminated
strings. A substring that contains a binary zero is correctly extracted
- and has a further zero added on the end, but the result is not, of
+ and has a further zero added on the end, but the result is not, of
course, a C string.
The functions in this section identify substrings by number. The number
zero refers to the entire matched substring, with higher numbers refer-
- ring to substrings captured by parenthesized groups. After a partial
- match, only substring zero is available. An attempt to extract any
- other substring gives the error PCRE2_ERROR_PARTIAL. The next section
+ ring to substrings captured by parenthesized groups. After a partial
+ match, only substring zero is available. An attempt to extract any
+ other substring gives the error PCRE2_ERROR_PARTIAL. The next section
describes similar functions for extracting captured substrings by name.
- If a pattern uses the \K escape sequence within a positive assertion,
+ If a pattern uses the \K escape sequence within a positive assertion,
the reported start of a successful match can be greater than the end of
- the match. For example, if the pattern (?=ab\K) is matched against
- "ab", the start and end offset values for the match are 2 and 0. In
- this situation, calling these functions with a zero substring number
+ the match. For example, if the pattern (?=ab\K) is matched against
+ "ab", the start and end offset values for the match are 2 and 0. In
+ this situation, calling these functions with a zero substring number
extracts a zero-length empty string.
- You can find the length in code units of a captured substring without
- extracting it by calling pcre2_substring_length_bynumber(). The first
- argument is a pointer to the match data block, the second is the group
- number, and the third is a pointer to a variable into which the length
- is placed. If you just want to know whether or not the substring has
+ You can find the length in code units of a captured substring without
+ extracting it by calling pcre2_substring_length_bynumber(). The first
+ argument is a pointer to the match data block, the second is the group
+ number, and the third is a pointer to a variable into which the length
+ is placed. If you just want to know whether or not the substring has
been captured, you can pass the third argument as NULL.
- The pcre2_substring_copy_bynumber() function copies a captured sub-
- string into a supplied buffer, whereas pcre2_substring_get_bynumber()
- copies it into new memory, obtained using the same memory allocation
- function that was used for the match data block. The first two argu-
- ments of these functions are a pointer to the match data block and a
+ The pcre2_substring_copy_bynumber() function copies a captured sub-
+ string into a supplied buffer, whereas pcre2_substring_get_bynumber()
+ copies it into new memory, obtained using the same memory allocation
+ function that was used for the match data block. The first two argu-
+ ments of these functions are a pointer to the match data block and a
capturing group number.
The final arguments of pcre2_substring_copy_bynumber() are a pointer to
@@ -2772,25 +2775,25 @@
for the extracted substring, excluding the terminating zero.
For pcre2_substring_get_bynumber() the third and fourth arguments point
- to variables that are updated with a pointer to the new memory and the
- number of code units that comprise the substring, again excluding the
- terminating zero. When the substring is no longer needed, the memory
+ to variables that are updated with a pointer to the new memory and the
+ number of code units that comprise the substring, again excluding the
+ terminating zero. When the substring is no longer needed, the memory
should be freed by calling pcre2_substring_free().
- The return value from all these functions is zero for success, or a
- negative error code. If the pattern match failed, the match failure
- code is returned. If a substring number greater than zero is used
- after a partial match, PCRE2_ERROR_PARTIAL is returned. Other possible
+ The return value from all these functions is zero for success, or a
+ negative error code. If the pattern match failed, the match failure
+ code is returned. If a substring number greater than zero is used
+ after a partial match, PCRE2_ERROR_PARTIAL is returned. Other possible
error codes are:
PCRE2_ERROR_NOMEMORY
- The buffer was too small for pcre2_substring_copy_bynumber(), or the
+ The buffer was too small for pcre2_substring_copy_bynumber(), or the
attempt to get memory failed for pcre2_substring_get_bynumber().
PCRE2_ERROR_NOSUBSTRING
- There is no substring with that number in the pattern, that is, the
+ There is no substring with that number in the pattern, that is, the
number is greater than the number of capturing parentheses.
PCRE2_ERROR_UNAVAILABLE
@@ -2801,8 +2804,8 @@
PCRE2_ERROR_UNSET
- The substring did not participate in the match. For example, if the
- pattern is (abc)|(def) and the subject is "def", and the ovector con-
+ The substring did not participate in the match. For example, if the
+ pattern is (abc)|(def) and the subject is "def", and the ovector con-
tains at least two capturing slots, substring number 1 is unset.
@@ -2813,32 +2816,32 @@
void pcre2_substring_list_free(PCRE2_SPTR *list);
- The pcre2_substring_list_get() function extracts all available sub-
- strings and builds a list of pointers to them. It also (optionally)
- builds a second list that contains their lengths (in code units),
+ The pcre2_substring_list_get() function extracts all available sub-
+ strings and builds a list of pointers to them. It also (optionally)
+ builds a second list that contains their lengths (in code units),
excluding a terminating zero that is added to each of them. All this is
done in a single block of memory that is obtained using the same memory
allocation function that was used to get the match data block.
- This function must be called only after a successful match. If called
+ This function must be called only after a successful match. If called
after a partial match, the error code PCRE2_ERROR_PARTIAL is returned.
- The address of the memory block is returned via listptr, which is also
+ The address of the memory block is returned via listptr, which is also
the start of the list of string pointers. The end of the list is marked
- by a NULL pointer. The address of the list of lengths is returned via
- lengthsptr. If your strings do not contain binary zeros and you do not
+ by a NULL pointer. The address of the list of lengths is returned via
+ lengthsptr. If your strings do not contain binary zeros and you do not
therefore need the lengths, you may supply NULL as the lengthsptr argu-
- ment to disable the creation of a list of lengths. The yield of the
- function is zero if all went well, or PCRE2_ERROR_NOMEMORY if the mem-
- ory block could not be obtained. When the list is no longer needed, it
+ ment to disable the creation of a list of lengths. The yield of the
+ function is zero if all went well, or PCRE2_ERROR_NOMEMORY if the mem-
+ ory block could not be obtained. When the list is no longer needed, it
should be freed by calling pcre2_substring_list_free().
If this function encounters a substring that is unset, which can happen
- when capturing subpattern number n+1 matches some part of the subject,
- but subpattern n has not been used at all, it returns an empty string.
- This can be distinguished from a genuine zero-length substring by
+ when capturing subpattern number n+1 matches some part of the subject,
+ but subpattern n has not been used at all, it returns an empty string.
+ This can be distinguished from a genuine zero-length substring by
inspecting the appropriate offset in the ovector, which contain
- PCRE2_UNSET for unset substrings, or by calling pcre2_sub-
+ PCRE2_UNSET for unset substrings, or by calling pcre2_sub-
string_length_bynumber().
@@ -2858,39 +2861,39 @@
void pcre2_substring_free(PCRE2_UCHAR *buffer);
- To extract a substring by name, you first have to find associated num-
+ To extract a substring by name, you first have to find associated num-
ber. For example, for this pattern:
(a+)b(?<xxx>\d+)...
the number of the subpattern called "xxx" is 2. If the name is known to
- be unique (PCRE2_DUPNAMES was not set), you can find the number from
+ be unique (PCRE2_DUPNAMES was not set), you can find the number from
the name by calling pcre2_substring_number_from_name(). The first argu-
- ment is the compiled pattern, and the second is the name. The yield of
+ ment is the compiled pattern, and the second is the name. The yield of
the function is the subpattern number, PCRE2_ERROR_NOSUBSTRING if there
- is no subpattern of that name, or PCRE2_ERROR_NOUNIQUESUBSTRING if
- there is more than one subpattern of that name. Given the number, you
- can extract the substring directly from the ovector, or use one of the
+ is no subpattern of that name, or PCRE2_ERROR_NOUNIQUESUBSTRING if
+ there is more than one subpattern of that name. Given the number, you
+ can extract the substring directly from the ovector, or use one of the
"bynumber" functions described above.
- For convenience, there are also "byname" functions that correspond to
- the "bynumber" functions, the only difference being that the second
- argument is a name instead of a number. If PCRE2_DUPNAMES is set and
+ For convenience, there are also "byname" functions that correspond to
+ the "bynumber" functions, the only difference being that the second
+ argument is a name instead of a number. If PCRE2_DUPNAMES is set and
there are duplicate names, these functions scan all the groups with the
given name, and return the first named string that is set.
- If there are no groups with the given name, PCRE2_ERROR_NOSUBSTRING is
- returned. If all groups with the name have numbers that are greater
- than the number of slots in the ovector, PCRE2_ERROR_UNAVAILABLE is
- returned. If there is at least one group with a slot in the ovector,
+ If there are no groups with the given name, PCRE2_ERROR_NOSUBSTRING is
+ returned. If all groups with the name have numbers that are greater
+ than the number of slots in the ovector, PCRE2_ERROR_UNAVAILABLE is
+ returned. If there is at least one group with a slot in the ovector,
but no group is found to be set, PCRE2_ERROR_UNSET is returned.
Warning: If the pattern uses the (?| feature to set up multiple subpat-
- terns with the same number, as described in the section on duplicate
- subpattern numbers in the pcre2pattern page, you cannot use names to
- distinguish the different subpatterns, because names are not included
- in the compiled code. The matching process uses only numbers. For this
- reason, the use of different names for subpatterns of the same number
+ terns with the same number, as described in the section on duplicate
+ subpattern numbers in the pcre2pattern page, you cannot use names to
+ distinguish the different subpatterns, because names are not included
+ in the compiled code. The matching process uses only numbers. For this
+ reason, the use of different names for subpatterns of the same number
causes an error at compile time.
@@ -2903,41 +2906,41 @@
PCRE2_SIZE rlength, PCRE2_UCHAR *outputbufferP,
PCRE2_SIZE *outlengthptr);
- This function calls pcre2_match() and then makes a copy of the subject
- string in outputbuffer, replacing the part that was matched with the
- replacement string, whose length is supplied in rlength. This can be
+ This function calls pcre2_match() and then makes a copy of the subject
+ string in outputbuffer, replacing the part that was matched with the
+ replacement string, whose length is supplied in rlength. This can be
given as PCRE2_ZERO_TERMINATED for a zero-terminated string. Matches in
- which a \K item in a lookahead in the pattern causes the match to end
+ which a \K item in a lookahead in the pattern causes the match to end
before it starts are not supported, and give rise to an error return.
- The first seven arguments of pcre2_substitute() are the same as for
+ The first seven arguments of pcre2_substitute() are the same as for
pcre2_match(), except that the partial matching options are not permit-
- ted, and match_data may be passed as NULL, in which case a match data
- block is obtained and freed within this function, using memory manage-
- ment functions from the match context, if provided, or else those that
+ ted, and match_data may be passed as NULL, in which case a match data
+ block is obtained and freed within this function, using memory manage-
+ ment functions from the match context, if provided, or else those that
were used to allocate memory for the compiled code.
- The outlengthptr argument must point to a variable that contains the
- length, in code units, of the output buffer. If the function is suc-
- cessful, the value is updated to contain the length of the new string,
+ The outlengthptr argument must point to a variable that contains the
+ length, in code units, of the output buffer. If the function is suc-
+ cessful, the value is updated to contain the length of the new string,
excluding the trailing zero that is automatically added.
- If the function is not successful, the value set via outlengthptr
- depends on the type of error. For syntax errors in the replacement
- string, the value is the offset in the replacement string where the
- error was detected. For other errors, the value is PCRE2_UNSET by
- default. This includes the case of the output buffer being too small,
- unless PCRE2_SUBSTITUTE_OVERFLOW_LENGTH is set (see below), in which
- case the value is the minimum length needed, including space for the
- trailing zero. Note that in order to compute the required length,
- pcre2_substitute() has to simulate all the matching and copying,
+ If the function is not successful, the value set via outlengthptr
+ depends on the type of error. For syntax errors in the replacement
+ string, the value is the offset in the replacement string where the
+ error was detected. For other errors, the value is PCRE2_UNSET by
+ default. This includes the case of the output buffer being too small,
+ unless PCRE2_SUBSTITUTE_OVERFLOW_LENGTH is set (see below), in which
+ case the value is the minimum length needed, including space for the
+ trailing zero. Note that in order to compute the required length,
+ pcre2_substitute() has to simulate all the matching and copying,
instead of giving an error return as soon as the buffer overflows. Note
also that the length is in code units, not bytes.
- In the replacement string, which is interpreted as a UTF string in UTF
- mode, and is checked for UTF validity unless the PCRE2_NO_UTF_CHECK
+ In the replacement string, which is interpreted as a UTF string in UTF
+ mode, and is checked for UTF validity unless the PCRE2_NO_UTF_CHECK
option is set, a dollar character is an escape character that can spec-
- ify the insertion of characters from capturing groups or (*MARK) items
+ ify the insertion of characters from capturing groups or (*MARK) items
in the pattern. The following forms are always recognized:
$$ insert a dollar character
@@ -2944,11 +2947,11 @@
$<n> or ${<n>} insert the contents of group <n>
$*MARK or ${*MARK} insert the name of the last (*MARK) encountered
- Either a group number or a group name can be given for <n>. Curly
- brackets are required only if the following character would be inter-
+ Either a group number or a group name can be given for <n>. Curly
+ brackets are required only if the following character would be inter-
preted as part of the number or name. The number may be zero to include
- the entire matched string. For example, if the pattern a(b)c is
- matched with "=abc=" and the replacement string "+$1$0$1+", the result
+ the entire matched string. For example, if the pattern a(b)c is
+ matched with "=abc=" and the replacement string "+$1$0$1+", the result
is "=+babcb+=".
The facility for inserting a (*MARK) name can be used to perform simple
@@ -2958,92 +2961,92 @@
apple lemon
2: pear orange
- As well as the usual options for pcre2_match(), a number of additional
+ As well as the usual options for pcre2_match(), a number of additional
options can be set in the options argument.
PCRE2_SUBSTITUTE_GLOBAL causes the function to iterate over the subject
- string, replacing every matching substring. If this is not set, only
- the first matching substring is replaced. If any matched substring has
- zero length, after the substitution has happened, an attempt to find a
- non-empty match at the same position is performed. If this is not suc-
- cessful, the current position is advanced by one character except when
- CRLF is a valid newline sequence and the next two characters are CR,
+ string, replacing every matching substring. If this is not set, only
+ the first matching substring is replaced. If any matched substring has
+ zero length, after the substitution has happened, an attempt to find a
+ non-empty match at the same position is performed. If this is not suc-
+ cessful, the current position is advanced by one character except when
+ CRLF is a valid newline sequence and the next two characters are CR,
LF. In this case, the current position is advanced by two characters.
- PCRE2_SUBSTITUTE_OVERFLOW_LENGTH changes what happens when the output
+ PCRE2_SUBSTITUTE_OVERFLOW_LENGTH changes what happens when the output
buffer is too small. The default action is to return PCRE2_ERROR_NOMEM-
- ORY immediately. If this option is set, however, pcre2_substitute()
+ ORY immediately. If this option is set, however, pcre2_substitute()
continues to go through the motions of matching and substituting (with-
- out, of course, writing anything) in order to compute the size of buf-
- fer that is needed. This value is passed back via the outlengthptr
- variable, with the result of the function still being
+ out, of course, writing anything) in order to compute the size of buf-
+ fer that is needed. This value is passed back via the outlengthptr
+ variable, with the result of the function still being
PCRE2_ERROR_NOMEMORY.
- Passing a buffer size of zero is a permitted way of finding out how
- much memory is needed for given substitution. However, this does mean
+ Passing a buffer size of zero is a permitted way of finding out how
+ much memory is needed for given substitution. However, this does mean
that the entire operation is carried out twice. Depending on the appli-
- cation, it may be more efficient to allocate a large buffer and free
- the excess afterwards, instead of using PCRE2_SUBSTITUTE_OVER-
+ cation, it may be more efficient to allocate a large buffer and free
+ the excess afterwards, instead of using PCRE2_SUBSTITUTE_OVER-
FLOW_LENGTH.
- PCRE2_SUBSTITUTE_UNKNOWN_UNSET causes references to capturing groups
- that do not appear in the pattern to be treated as unset groups. This
- option should be used with care, because it means that a typo in a
- group name or number no longer causes the PCRE2_ERROR_NOSUBSTRING
+ PCRE2_SUBSTITUTE_UNKNOWN_UNSET causes references to capturing groups
+ that do not appear in the pattern to be treated as unset groups. This
+ option should be used with care, because it means that a typo in a
+ group name or number no longer causes the PCRE2_ERROR_NOSUBSTRING
error.
- PCRE2_SUBSTITUTE_UNSET_EMPTY causes unset capturing groups (including
+ PCRE2_SUBSTITUTE_UNSET_EMPTY causes unset capturing groups (including
unknown groups when PCRE2_SUBSTITUTE_UNKNOWN_UNSET is set) to be
- treated as empty strings when inserted as described above. If this
- option is not set, an attempt to insert an unset group causes the
- PCRE2_ERROR_UNSET error. This option does not influence the extended
+ treated as empty strings when inserted as described above. If this
+ option is not set, an attempt to insert an unset group causes the
+ PCRE2_ERROR_UNSET error. This option does not influence the extended
substitution syntax described below.
- PCRE2_SUBSTITUTE_EXTENDED causes extra processing to be applied to the
- replacement string. Without this option, only the dollar character is
- special, and only the group insertion forms listed above are valid.
+ PCRE2_SUBSTITUTE_EXTENDED causes extra processing to be applied to the
+ replacement string. Without this option, only the dollar character is
+ special, and only the group insertion forms listed above are valid.
When PCRE2_SUBSTITUTE_EXTENDED is set, two things change:
- Firstly, backslash in a replacement string is interpreted as an escape
+ Firstly, backslash in a replacement string is interpreted as an escape
character. The usual forms such as \n or \x{ddd} can be used to specify
- particular character codes, and backslash followed by any non-alphanu-
- meric character quotes that character. Extended quoting can be coded
+ particular character codes, and backslash followed by any non-alphanu-
+ meric character quotes that character. Extended quoting can be coded
using \Q...\E, exactly as in pattern strings.
- There are also four escape sequences for forcing the case of inserted
- letters. The insertion mechanism has three states: no case forcing,
+ There are also four escape sequences for forcing the case of inserted
+ letters. The insertion mechanism has three states: no case forcing,
force upper case, and force lower case. The escape sequences change the
current state: \U and \L change to upper or lower case forcing, respec-
- tively, and \E (when not terminating a \Q quoted sequence) reverts to
- no case forcing. The sequences \u and \l force the next character (if
- it is a letter) to upper or lower case, respectively, and then the
+ tively, and \E (when not terminating a \Q quoted sequence) reverts to
+ no case forcing. The sequences \u and \l force the next character (if
+ it is a letter) to upper or lower case, respectively, and then the
state automatically reverts to no case forcing. Case forcing applies to
all inserted characters, including those from captured groups and let-
ters within \Q...\E quoted sequences.
Note that case forcing sequences such as \U...\E do not nest. For exam-
- ple, the result of processing "\Uaa\LBB\Ecc\E" is "AAbbcc"; the final
+ ple, the result of processing "\Uaa\LBB\Ecc\E" is "AAbbcc"; the final
\E has no effect.
- The second effect of setting PCRE2_SUBSTITUTE_EXTENDED is to add more
- flexibility to group substitution. The syntax is similar to that used
+ The second effect of setting PCRE2_SUBSTITUTE_EXTENDED is to add more
+ flexibility to group substitution. The syntax is similar to that used
by Bash:
${<n>:-<string>}
${<n>:+<string1>:<string2>}
- As before, <n> may be a group number or a name. The first form speci-
- fies a default value. If group <n> is set, its value is inserted; if
- not, <string> is expanded and the result inserted. The second form
- specifies strings that are expanded and inserted when group <n> is set
- or unset, respectively. The first form is just a convenient shorthand
+ As before, <n> may be a group number or a name. The first form speci-
+ fies a default value. If group <n> is set, its value is inserted; if
+ not, <string> is expanded and the result inserted. The second form
+ specifies strings that are expanded and inserted when group <n> is set
+ or unset, respectively. The first form is just a convenient shorthand
for
${<n>:+${<n>}:<string>}
- Backslash can be used to escape colons and closing curly brackets in
- the replacement strings. A change of the case forcing state within a
- replacement string remains in force afterwards, as shown in this
+ Backslash can be used to escape colons and closing curly brackets in
+ the replacement strings. A change of the case forcing state within a
+ replacement string remains in force afterwards, as shown in this
pcre2test example:
/(some)?(body)/substitute_extended,replace=${1:+\U:\L}HeLLo
@@ -3052,16 +3055,16 @@
somebody
1: HELLO
- The PCRE2_SUBSTITUTE_UNSET_EMPTY option does not affect these extended
- substitutions. However, PCRE2_SUBSTITUTE_UNKNOWN_UNSET does cause
+ The PCRE2_SUBSTITUTE_UNSET_EMPTY option does not affect these extended
+ substitutions. However, PCRE2_SUBSTITUTE_UNKNOWN_UNSET does cause
unknown groups in the extended syntax forms to be treated as unset.
- If successful, pcre2_substitute() returns the number of replacements
+ If successful, pcre2_substitute() returns the number of replacements
that were made. This may be zero if no matches were found, and is never
greater than 1 unless PCRE2_SUBSTITUTE_GLOBAL is set.
In the event of an error, a negative error code is returned. Except for
- PCRE2_ERROR_NOMATCH (which is never returned), errors from
+ PCRE2_ERROR_NOMATCH (which is never returned), errors from
pcre2_match() are passed straight back.
PCRE2_ERROR_NOSUBSTRING is returned for a non-existent substring inser-
@@ -3068,25 +3071,25 @@
tion, unless PCRE2_SUBSTITUTE_UNKNOWN_UNSET is set.
PCRE2_ERROR_UNSET is returned for an unset substring insertion (includ-
- ing an unknown substring when PCRE2_SUBSTITUTE_UNKNOWN_UNSET is set)
+ ing an unknown substring when PCRE2_SUBSTITUTE_UNKNOWN_UNSET is set)
when the simple (non-extended) syntax is used and PCRE2_SUBSTI-
TUTE_UNSET_EMPTY is not set.
- PCRE2_ERROR_NOMEMORY is returned if the output buffer is not big
+ PCRE2_ERROR_NOMEMORY is returned if the output buffer is not big
enough. If the PCRE2_SUBSTITUTE_OVERFLOW_LENGTH option is set, the size
- of buffer that is needed is returned via outlengthptr. Note that this
+ of buffer that is needed is returned via outlengthptr. Note that this
does not happen by default.
- PCRE2_ERROR_BADREPLACEMENT is used for miscellaneous syntax errors in
+ PCRE2_ERROR_BADREPLACEMENT is used for miscellaneous syntax errors in
the replacement string, with more particular errors being
- PCRE2_ERROR_BADREPESCAPE (invalid escape sequence), PCRE2_ERROR_REP-
- MISSING_BRACE (closing curly bracket not found), PCRE2_BADSUBSTITUTION
- (syntax error in extended group substitution), and PCRE2_BADSUBPATTERN
- (the pattern match ended before it started, which can happen if \K is
+ PCRE2_ERROR_BADREPESCAPE (invalid escape sequence), PCRE2_ERROR_REP-
+ MISSING_BRACE (closing curly bracket not found), PCRE2_BADSUBSTITUTION
+ (syntax error in extended group substitution), and PCRE2_BADSUBPATTERN
+ (the pattern match ended before it started, which can happen if \K is
used in an assertion).
As for all PCRE2 errors, a text message that describes the error can be
- obtained by calling the pcre2_get_error_message() function (see
+ obtained by calling the pcre2_get_error_message() function (see
"Obtaining a textual error message" above).
@@ -3095,56 +3098,56 @@
int pcre2_substring_nametable_scan(const pcre2_code *code,
PCRE2_SPTR name, PCRE2_SPTR *first, PCRE2_SPTR *last);
- When a pattern is compiled with the PCRE2_DUPNAMES option, names for
- subpatterns are not required to be unique. Duplicate names are always
- allowed for subpatterns with the same number, created by using the (?|
- feature. Indeed, if such subpatterns are named, they are required to
+ When a pattern is compiled with the PCRE2_DUPNAMES option, names for
+ subpatterns are not required to be unique. Duplicate names are always
+ allowed for subpatterns with the same number, created by using the (?|
+ feature. Indeed, if such subpatterns are named, they are required to
use the same names.
Normally, patterns with duplicate names are such that in any one match,
- only one of the named subpatterns participates. An example is shown in
+ only one of the named subpatterns participates. An example is shown in
the pcre2pattern documentation.
- When duplicates are present, pcre2_substring_copy_byname() and
- pcre2_substring_get_byname() return the first substring corresponding
- to the given name that is set. Only if none are set is
- PCRE2_ERROR_UNSET is returned. The pcre2_substring_number_from_name()
+ When duplicates are present, pcre2_substring_copy_byname() and
+ pcre2_substring_get_byname() return the first substring corresponding
+ to the given name that is set. Only if none are set is
+ PCRE2_ERROR_UNSET is returned. The pcre2_substring_number_from_name()
function returns the error PCRE2_ERROR_NOUNIQUESUBSTRING when there are
duplicate names.
- If you want to get full details of all captured substrings for a given
- name, you must use the pcre2_substring_nametable_scan() function. The
- first argument is the compiled pattern, and the second is the name. If
- the third and fourth arguments are NULL, the function returns a group
+ If you want to get full details of all captured substrings for a given
+ name, you must use the pcre2_substring_nametable_scan() function. The
+ first argument is the compiled pattern, and the second is the name. If
+ the third and fourth arguments are NULL, the function returns a group
number for a unique name, or PCRE2_ERROR_NOUNIQUESUBSTRING otherwise.
When the third and fourth arguments are not NULL, they must be pointers
- to variables that are updated by the function. After it has run, they
+ to variables that are updated by the function. After it has run, they
point to the first and last entries in the name-to-number table for the
- given name, and the function returns the length of each entry in code
- units. In both cases, PCRE2_ERROR_NOSUBSTRING is returned if there are
+ given name, and the function returns the length of each entry in code
+ units. In both cases, PCRE2_ERROR_NOSUBSTRING is returned if there are
no entries for the given name.
The format of the name table is described above in the section entitled
- Information about a pattern. Given all the relevant entries for the
- name, you can extract each of their numbers, and hence the captured
+ Information about a pattern. Given all the relevant entries for the
+ name, you can extract each of their numbers, and hence the captured
data.
FINDING ALL POSSIBLE MATCHES AT ONE POSITION
- The traditional matching function uses a similar algorithm to Perl,
- which stops when it finds the first match at a given point in the sub-
+ The traditional matching function uses a similar algorithm to Perl,
+ which stops when it finds the first match at a given point in the sub-
ject. If you want to find all possible matches, or the longest possible
- match at a given position, consider using the alternative matching
- function (see below) instead. If you cannot use the alternative func-
+ match at a given position, consider using the alternative matching
+ function (see below) instead. If you cannot use the alternative func-
tion, you can kludge it up by making use of the callout facility, which
is described in the pcre2callout documentation.
What you have to do is to insert a callout right at the end of the pat-
- tern. When your callout function is called, extract and save the cur-
- rent matched substring. Then return 1, which forces pcre2_match() to
- backtrack and try other alternatives. Ultimately, when it runs out of
+ tern. When your callout function is called, extract and save the cur-
+ rent matched substring. Then return 1, which forces pcre2_match() to
+ backtrack and try other alternatives. Ultimately, when it runs out of
matches, pcre2_match() will yield PCRE2_ERROR_NOMATCH.
@@ -3156,26 +3159,26 @@
pcre2_match_context *mcontext,
int *workspace, PCRE2_SIZE wscount);
- The function pcre2_dfa_match() is called to match a subject string
- against a compiled pattern, using a matching algorithm that scans the
+ The function pcre2_dfa_match() is called to match a subject string
+ against a compiled pattern, using a matching algorithm that scans the
subject string just once (not counting lookaround assertions), and does
- not backtrack. This has different characteristics to the normal algo-
- rithm, and is not compatible with Perl. Some of the features of PCRE2
- patterns are not supported. Nevertheless, there are times when this
- kind of matching can be useful. For a discussion of the two matching
+ not backtrack. This has different characteristics to the normal algo-
+ rithm, and is not compatible with Perl. Some of the features of PCRE2
+ patterns are not supported. Nevertheless, there are times when this
+ kind of matching can be useful. For a discussion of the two matching
algorithms, and a list of features that pcre2_dfa_match() does not sup-
port, see the pcre2matching documentation.
- The arguments for the pcre2_dfa_match() function are the same as for
+ The arguments for the pcre2_dfa_match() function are the same as for
pcre2_match(), plus two extras. The ovector within the match data block
is used in a different way, and this is described below. The other com-
- mon arguments are used in the same way as for pcre2_match(), so their
+ mon arguments are used in the same way as for pcre2_match(), so their
description is not repeated here.
- The two additional arguments provide workspace for the function. The
- workspace vector should contain at least 20 elements. It is used for
+ The two additional arguments provide workspace for the function. The
+ workspace vector should contain at least 20 elements. It is used for
keeping track of multiple paths through the pattern tree. More
- workspace is needed for patterns and subjects where there are a lot of
+ workspace is needed for patterns and subjects where there are a lot of
potential matches.
Here is an example of a simple call to pcre2_dfa_match():
@@ -3195,45 +3198,45 @@
Option bits for pcre_dfa_match()
- The unused bits of the options argument for pcre2_dfa_match() must be
- zero. The only bits that may be set are PCRE2_ANCHORED, PCRE2_ENDAN-
- CHORED, PCRE2_NOTBOL, PCRE2_NOTEOL, PCRE2_NOTEMPTY,
+ The unused bits of the options argument for pcre2_dfa_match() must be
+ zero. The only bits that may be set are PCRE2_ANCHORED, PCRE2_ENDAN-
+ CHORED, PCRE2_NOTBOL, PCRE2_NOTEOL, PCRE2_NOTEMPTY,
PCRE2_NOTEMPTY_ATSTART, PCRE2_NO_UTF_CHECK, PCRE2_PARTIAL_HARD,
- PCRE2_PARTIAL_SOFT, PCRE2_DFA_SHORTEST, and PCRE2_DFA_RESTART. All but
- the last four of these are exactly the same as for pcre2_match(), so
+ PCRE2_PARTIAL_SOFT, PCRE2_DFA_SHORTEST, and PCRE2_DFA_RESTART. All but
+ the last four of these are exactly the same as for pcre2_match(), so
their description is not repeated here.
PCRE2_PARTIAL_HARD
PCRE2_PARTIAL_SOFT
- These have the same general effect as they do for pcre2_match(), but
- the details are slightly different. When PCRE2_PARTIAL_HARD is set for
- pcre2_dfa_match(), it returns PCRE2_ERROR_PARTIAL if the end of the
+ These have the same general effect as they do for pcre2_match(), but
+ the details are slightly different. When PCRE2_PARTIAL_HARD is set for
+ pcre2_dfa_match(), it returns PCRE2_ERROR_PARTIAL if the end of the
subject is reached and there is still at least one matching possibility
that requires additional characters. This happens even if some complete
- matches have already been found. When PCRE2_PARTIAL_SOFT is set, the
- return code PCRE2_ERROR_NOMATCH is converted into PCRE2_ERROR_PARTIAL
- if the end of the subject is reached, there have been no complete
+ matches have already been found. When PCRE2_PARTIAL_SOFT is set, the
+ return code PCRE2_ERROR_NOMATCH is converted into PCRE2_ERROR_PARTIAL
+ if the end of the subject is reached, there have been no complete
matches, but there is still at least one matching possibility. The por-
- tion of the string that was inspected when the longest partial match
+ tion of the string that was inspected when the longest partial match
was found is set as the first matching string in both cases. There is a
- more detailed discussion of partial and multi-segment matching, with
+ more detailed discussion of partial and multi-segment matching, with
examples, in the pcre2partial documentation.
PCRE2_DFA_SHORTEST
- Setting the PCRE2_DFA_SHORTEST option causes the matching algorithm to
+ Setting the PCRE2_DFA_SHORTEST option causes the matching algorithm to
stop as soon as it has found one match. Because of the way the alterna-
- tive algorithm works, this is necessarily the shortest possible match
+ tive algorithm works, this is necessarily the shortest possible match
at the first possible matching point in the subject string.
PCRE2_DFA_RESTART
- When pcre2_dfa_match() returns a partial match, it is possible to call
+ When pcre2_dfa_match() returns a partial match, it is possible to call
it again, with additional subject characters, and have it continue with
the same match. The PCRE2_DFA_RESTART option requests this action; when
- it is set, the workspace and wscount options must reference the same
- vector as before because data about the match so far is left in them
+ it is set, the workspace and wscount options must reference the same
+ vector as before because data about the match so far is left in them
after a partial match. There is more discussion of this facility in the
pcre2partial documentation.
@@ -3241,8 +3244,8 @@
When pcre2_dfa_match() succeeds, it may have matched more than one sub-
string in the subject. Note, however, that all the matches from one run
- of the function start at the same point in the subject. The shorter
- matches are all initial substrings of the longer matches. For example,
+ of the function start at the same point in the subject. The shorter
+ matches are all initial substrings of the longer matches. For example,
if the pattern
<.*>
@@ -3257,17 +3260,17 @@
<something> <something else>
<something>
- On success, the yield of the function is a number greater than zero,
- which is the number of matched substrings. The offsets of the sub-
- strings are returned in the ovector, and can be extracted by number in
- the same way as for pcre2_match(), but the numbers bear no relation to
- any capturing groups that may exist in the pattern, because DFA match-
+ On success, the yield of the function is a number greater than zero,
+ which is the number of matched substrings. The offsets of the sub-
+ strings are returned in the ovector, and can be extracted by number in
+ the same way as for pcre2_match(), but the numbers bear no relation to
+ any capturing groups that may exist in the pattern, because DFA match-
ing does not support group capture.
- Calls to the convenience functions that extract substrings by name
- return the error PCRE2_ERROR_DFA_UFUNC (unsupported function) if used
+ Calls to the convenience functions that extract substrings by name
+ return the error PCRE2_ERROR_DFA_UFUNC (unsupported function) if used
after a DFA match. The convenience functions that extract substrings by
- number never return PCRE2_ERROR_NOSUBSTRING, and the meanings of some
+ number never return PCRE2_ERROR_NOSUBSTRING, and the meanings of some
other errors are slightly different:
PCRE2_ERROR_UNAVAILABLE
@@ -3277,64 +3280,64 @@
PCRE2_ERROR_UNSET
- There is a slot in the ovector for this substring, but there were
+ There is a slot in the ovector for this substring, but there were
insufficient matches to fill it.
- The matched strings are stored in the ovector in reverse order of
- length; that is, the longest matching string is first. If there were
- too many matches to fit into the ovector, the yield of the function is
+ The matched strings are stored in the ovector in reverse order of
+ length; that is, the longest matching string is first. If there were
+ too many matches to fit into the ovector, the yield of the function is
zero, and the vector is filled with the longest matches.
- NOTE: PCRE2's "auto-possessification" optimization usually applies to
- character repeats at the end of a pattern (as well as internally). For
- example, the pattern "a\d+" is compiled as if it were "a\d++". For DFA
- matching, this means that only one possible match is found. If you
- really do want multiple matches in such cases, either use an ungreedy
- repeat such as "a\d+?" or set the PCRE2_NO_AUTO_POSSESS option when
+ NOTE: PCRE2's "auto-possessification" optimization usually applies to
+ character repeats at the end of a pattern (as well as internally). For
+ example, the pattern "a\d+" is compiled as if it were "a\d++". For DFA
+ matching, this means that only one possible match is found. If you
+ really do want multiple matches in such cases, either use an ungreedy
+ repeat such as "a\d+?" or set the PCRE2_NO_AUTO_POSSESS option when
compiling.
Error returns from pcre2_dfa_match()
The pcre2_dfa_match() function returns a negative number when it fails.
- Many of the errors are the same as for pcre2_match(), as described
+ Many of the errors are the same as for pcre2_match(), as described
above. There are in addition the following errors that are specific to
pcre2_dfa_match():
PCRE2_ERROR_DFA_UITEM
- This return is given if pcre2_dfa_match() encounters an item in the
- pattern that it does not support, for instance, the use of \C in a UTF
+ This return is given if pcre2_dfa_match() encounters an item in the
+ pattern that it does not support, for instance, the use of \C in a UTF
mode or a back reference.
PCRE2_ERROR_DFA_UCOND
- This return is given if pcre2_dfa_match() encounters a condition item
- that uses a back reference for the condition, or a test for recursion
+ This return is given if pcre2_dfa_match() encounters a condition item
+ that uses a back reference for the condition, or a test for recursion
in a specific group. These are not supported.
PCRE2_ERROR_DFA_WSSIZE
- This return is given if pcre2_dfa_match() runs out of space in the
+ This return is given if pcre2_dfa_match() runs out of space in the
workspace vector.
PCRE2_ERROR_DFA_RECURSE
- When a recursive subpattern is processed, the matching function calls
+ When a recursive subpattern is processed, the matching function calls
itself recursively, using private memory for the ovector and workspace.
- This error is given if the internal ovector is not large enough. This
+ This error is given if the internal ovector is not large enough. This
should be extremely rare, as a vector of size 1000 is used.
PCRE2_ERROR_DFA_BADRESTART
- When pcre2_dfa_match() is called with the PCRE2_DFA_RESTART option,
- some plausibility checks are made on the contents of the workspace,
- which should contain data about the previous partial match. If any of
+ When pcre2_dfa_match() is called with the PCRE2_DFA_RESTART option,
+ some plausibility checks are made on the contents of the workspace,
+ which should contain data about the previous partial match. If any of
these checks fail, this error is given.
SEE ALSO
- pcre2build(3), pcre2callout(3), pcre2demo(3), pcre2matching(3),
+ pcre2build(3), pcre2callout(3), pcre2demo(3), pcre2matching(3),
pcre2partial(3), pcre2posix(3), pcre2sample(3), pcre2unicode(3).
@@ -3347,7 +3350,7 @@
REVISION
- Last updated: 17 May 2017
+ Last updated: 26 May 2017
Copyright (c) 1997-2017 University of Cambridge.
------------------------------------------------------------------------------
@@ -5756,15 +5759,15 @@
Newline conventions
- PCRE2 supports five different conventions for indicating line breaks in
+ PCRE2 supports six different conventions for indicating line breaks in
strings: a single CR (carriage return) character, a single LF (line-
feed) character, the two-character sequence CRLF, any of the three pre-
- ceding, or any Unicode newline sequence. The pcre2api page has further
- discussion about newlines, and shows how to set the newline convention
- when calling pcre2_compile().
+ ceding, any Unicode newline sequence, or the NUL character (binary
+ zero). The pcre2api page has further discussion about newlines, and
+ shows how to set the newline convention when calling pcre2_compile().
It is also possible to specify a newline convention by starting a pat-
- tern string with one of the following five sequences:
+ tern string with one of the following sequences:
(*CR) carriage return
(*LF) linefeed
@@ -5771,6 +5774,7 @@
(*CRLF) carriage return, followed by linefeed
(*ANYCRLF) any of the three above
(*ANY) all Unicode newline sequences
+ (*NUL) the NUL character (binary zero)
These override the default and the options given to the compiling func-
tion. For example, on a Unix system where LF is the default newline
@@ -8682,7 +8686,7 @@
REVISION
- Last updated: 18 April 2017
+ Last updated: 26 May 2017
Copyright (c) 1997-2017 University of Cambridge.
------------------------------------------------------------------------------
@@ -9773,6 +9777,7 @@
(*CRLF) carriage return followed by linefeed
(*ANYCRLF) all three of the above
(*ANY) any Unicode newline sequence
+ (*NUL) the NUL character (binary zero)
WHAT \R MATCHES
@@ -9901,7 +9906,7 @@
REVISION
- Last updated: 18 April 2017
+ Last updated: 26 May 2017
Copyright (c) 1997-2017 University of Cambridge.
------------------------------------------------------------------------------
Modified: code/trunk/doc/pcre2_config.3
===================================================================
--- code/trunk/doc/pcre2_config.3 2017-05-25 16:34:22 UTC (rev 805)
+++ code/trunk/doc/pcre2_config.3 2017-05-26 17:14:36 UTC (rev 806)
@@ -1,4 +1,4 @@
-.TH PCRE2_CONFIG 3 "11 April 2017" "PCRE2 10.30"
+.TH PCRE2_CONFIG 3 "26 May 2017" "PCRE2 10.30"
.SH NAME
PCRE2 - Perl-compatible regular expressions (revised API)
.SH SYNOPSIS
@@ -47,6 +47,7 @@
PCRE2_NEWLINE_CRLF
PCRE2_NEWLINE_ANY
PCRE2_NEWLINE_ANYCRLF
+ PCRE2_NEWLINE_NUL
PCRE2_CONFIG_PARENSLIMIT Default parentheses nesting limit
PCRE2_CONFIG_RECURSIONLIMIT Obsolete: use PCRE2_CONFIG_DEPTHLIMIT
PCRE2_CONFIG_STACKRECURSE Obsolete: always returns 0
Modified: code/trunk/doc/pcre2_pattern_info.3
===================================================================
--- code/trunk/doc/pcre2_pattern_info.3 2017-05-25 16:34:22 UTC (rev 805)
+++ code/trunk/doc/pcre2_pattern_info.3 2017-05-26 17:14:36 UTC (rev 806)
@@ -1,4 +1,4 @@
-.TH PCRE2_PATTERN_INFO 3 "11 April 2017" "PCRE2 10.30"
+.TH PCRE2_PATTERN_INFO 3 "26 May 2017" "PCRE2 10.30"
.SH NAME
PCRE2 - Perl-compatible regular expressions (revised API)
.SH SYNOPSIS
@@ -71,6 +71,7 @@
PCRE2_NEWLINE_CRLF
PCRE2_NEWLINE_ANY
PCRE2_NEWLINE_ANYCRLF
+ PCRE2_NEWLINE_NUL
PCRE2_INFO_RECURSIONLIMIT Obsolete synonym for PCRE2_INFO_DEPTHLIMIT
PCRE2_INFO_SIZE Size of compiled pattern
.sp
Modified: code/trunk/doc/pcre2_set_newline.3
===================================================================
--- code/trunk/doc/pcre2_set_newline.3 2017-05-25 16:34:22 UTC (rev 805)
+++ code/trunk/doc/pcre2_set_newline.3 2017-05-26 17:14:36 UTC (rev 806)
@@ -1,4 +1,4 @@
-.TH PCRE2_SET_NEWLINE 3 "22 October 2014" "PCRE2 10.00"
+.TH PCRE2_SET_NEWLINE 3 "26 May 2017" "PCRE2 10.30"
.SH NAME
PCRE2 - Perl-compatible regular expressions (revised API)
.SH SYNOPSIS
@@ -23,6 +23,7 @@
PCRE2_NEWLINE_CRLF CR followed by LF only
PCRE2_NEWLINE_ANYCRLF Any of the above
PCRE2_NEWLINE_ANY Any Unicode newline sequence
+ PCRE2_NEWLINE_NUL The NUL character (binary zero)
.sp
The result is zero for success or PCRE2_ERROR_BADDATA if the second argument is
invalid.
Modified: code/trunk/doc/pcre2api.3
===================================================================
--- code/trunk/doc/pcre2api.3 2017-05-25 16:34:22 UTC (rev 805)
+++ code/trunk/doc/pcre2api.3 2017-05-26 17:14:36 UTC (rev 806)
@@ -1,4 +1,4 @@
-.TH PCRE2API 3 "17 May 2017" "PCRE2 10.30"
+.TH PCRE2API 3 "26 May 2017" "PCRE2 10.30"
.SH NAME
PCRE2 - Perl-compatible regular expressions (revised API)
.sp
@@ -724,8 +724,9 @@
This specifies which characters or character sequences are to be recognized as
newlines. The value must be one of PCRE2_NEWLINE_CR (carriage return only),
PCRE2_NEWLINE_LF (linefeed only), PCRE2_NEWLINE_CRLF (the two-character
-sequence CR followed by LF), PCRE2_NEWLINE_ANYCRLF (any of the above), or
-PCRE2_NEWLINE_ANY (any Unicode newline sequence).
+sequence CR followed by LF), PCRE2_NEWLINE_ANYCRLF (any of the above),
+PCRE2_NEWLINE_ANY (any Unicode newline sequence), or PCRE2_NEWLINE_NUL (the
+NUL character, that is a binary zero).
.P
A pattern can override the value set in the compile context by starting with a
sequence such as (*CRLF). See the
@@ -1039,6 +1040,7 @@
PCRE2_NEWLINE_CRLF Carriage return, linefeed (CRLF)
PCRE2_NEWLINE_ANY Any Unicode line ending
PCRE2_NEWLINE_ANYCRLF Any of CR, LF, or CRLF
+ PCRE2_NEWLINE_NUL The NUL character (binary zero)
.sp
The default should normally correspond to the standard sequence for your
operating system.
@@ -2090,6 +2092,7 @@
PCRE2_NEWLINE_CRLF Carriage return, linefeed (CRLF)
PCRE2_NEWLINE_ANY Any Unicode line ending
PCRE2_NEWLINE_ANYCRLF Any of CR, LF, or CRLF
+ PCRE2_NEWLINE_NUL The NUL character (binary zero)
.sp
This identifies the character sequence that will be recognized as meaning
"newline" while matching.
@@ -3488,6 +3491,6 @@
.rs
.sp
.nf
-Last updated: 17 May 2017
+Last updated: 26 May 2017
Copyright (c) 1997-2017 University of Cambridge.
.fi
Modified: code/trunk/doc/pcre2grep.1
===================================================================
--- code/trunk/doc/pcre2grep.1 2017-05-25 16:34:22 UTC (rev 805)
+++ code/trunk/doc/pcre2grep.1 2017-05-26 17:14:36 UTC (rev 806)
@@ -1,4 +1,4 @@
-.TH PCRE2GREP 1 "11 April 2017" "PCRE2 10.30"
+.TH PCRE2GREP 1 "26 May 2017" "PCRE2 10.30"
.SH NAME
pcre2grep - a grep with Perl-compatible regular expressions.
.SH SYNOPSIS
@@ -112,9 +112,11 @@
.rs
.sp
By default, a file that contains a binary zero byte within the first 1024 bytes
-is identified as a binary file, and is processed specially. (GNU grep also
-identifies binary files in this manner.) See the \fB--binary-files\fP option
-for a means of changing the way binary files are handled.
+is identified as a binary file, and is processed specially. (GNU grep
+identifies binary files in this manner.) However, if the newline type is
+specified as "nul", that is, the line terminator is a binary zero, the test for
+a binary file is not applied. See the \fB--binary-files\fP option for a means
+of changing the way binary files are handled.
.
.
.SH OPTIONS
@@ -848,6 +850,6 @@
.rs
.sp
.nf
-Last updated: 11 April 2017
+Last updated: 26 May 2017
Copyright (c) 1997-2017 University of Cambridge.
.fi
Modified: code/trunk/doc/pcre2grep.txt
===================================================================
--- code/trunk/doc/pcre2grep.txt 2017-05-25 16:34:22 UTC (rev 805)
+++ code/trunk/doc/pcre2grep.txt 2017-05-26 17:14:36 UTC (rev 806)
@@ -114,7 +114,9 @@
By default, a file that contains a binary zero byte within the first
1024 bytes is identified as a binary file, and is processed specially.
- (GNU grep also identifies binary files in this manner.) See the
+ (GNU grep identifies binary files in this manner.) However, if the new-
+ line type is specified as "nul", that is, the line terminator is a
+ binary zero, the test for a binary file is not applied. See the
--binary-files option for a means of changing the way binary files are
handled.
@@ -915,5 +917,5 @@
REVISION
- Last updated: 11 April 2017
+ Last updated: 26 May 2017
Copyright (c) 1997-2017 University of Cambridge.
Modified: code/trunk/doc/pcre2pattern.3
===================================================================
--- code/trunk/doc/pcre2pattern.3 2017-05-25 16:34:22 UTC (rev 805)
+++ code/trunk/doc/pcre2pattern.3 2017-05-26 17:14:36 UTC (rev 806)
@@ -1,4 +1,4 @@
-.TH PCRE2PATTERN 3 "18 April 2017" "PCRE2 10.30"
+.TH PCRE2PATTERN 3 "26 May 2017" "PCRE2 10.30"
.SH NAME
PCRE2 - Perl-compatible regular expressions (revised API)
.SH "PCRE2 REGULAR EXPRESSION DETAILS"
@@ -180,10 +180,10 @@
.SS "Newline conventions"
.rs
.sp
-PCRE2 supports five different conventions for indicating line breaks in
+PCRE2 supports six different conventions for indicating line breaks in
strings: a single CR (carriage return) character, a single LF (linefeed)
-character, the two-character sequence CRLF, any of the three preceding, or any
-Unicode newline sequence. The
+character, the two-character sequence CRLF, any of the three preceding, any
+Unicode newline sequence, or the NUL character (binary zero). The
.\" HREF
\fBpcre2api\fP
.\"
@@ -196,7 +196,7 @@
\fBpcre2_compile()\fP.
.P
It is also possible to specify a newline convention by starting a pattern
-string with one of the following five sequences:
+string with one of the following sequences:
.sp
(*CR) carriage return
(*LF) linefeed
@@ -203,6 +203,7 @@
(*CRLF) carriage return, followed by linefeed
(*ANYCRLF) any of the three above
(*ANY) all Unicode newline sequences
+ (*NUL) the NUL character (binary zero)
.sp
These override the default and the options given to the compiling function. For
example, on a Unix system where LF is the default newline sequence, the pattern
@@ -3474,6 +3475,6 @@
.rs
.sp
.nf
-Last updated: 18 April 2017
+Last updated: 26 May 2017
Copyright (c) 1997-2017 University of Cambridge.
.fi
Modified: code/trunk/doc/pcre2syntax.3
===================================================================
--- code/trunk/doc/pcre2syntax.3 2017-05-25 16:34:22 UTC (rev 805)
+++ code/trunk/doc/pcre2syntax.3 2017-05-26 17:14:36 UTC (rev 806)
@@ -1,4 +1,4 @@
-.TH PCRE2SYNTAX 3 "18 April 2017" "PCRE2 10.30"
+.TH PCRE2SYNTAX 3 "26 May 2017" "PCRE2 10.30"
.SH NAME
PCRE2 - Perl-compatible regular expressions (revised API)
.SH "PCRE2 REGULAR EXPRESSION SYNTAX SUMMARY"
@@ -447,6 +447,7 @@
(*CRLF) carriage return followed by linefeed
(*ANYCRLF) all three of the above
(*ANY) any Unicode newline sequence
+ (*NUL) the NUL character (binary zero)
.
.
.SH "WHAT \eR MATCHES"
@@ -587,6 +588,6 @@
.rs
.sp
.nf
-Last updated: 18 April 2017
+Last updated: 26 May 2017
Copyright (c) 1997-2017 University of Cambridge.
.fi
Modified: code/trunk/doc/pcre2test.1
===================================================================
--- code/trunk/doc/pcre2test.1 2017-05-25 16:34:22 UTC (rev 805)
+++ code/trunk/doc/pcre2test.1 2017-05-26 17:14:36 UTC (rev 806)
@@ -1,4 +1,4 @@
-.TH PCRE2TEST 1 "17 May 2017" "PCRE 10.30"
+.TH PCRE2TEST 1 "26 May 2017" "PCRE 10.30"
.SH NAME
pcre2test - a program for testing Perl-compatible regular expressions.
.SH SYNOPSIS
@@ -150,7 +150,7 @@
linksize the configured internal link size (2, 3, or 4)
exit code is set to the link size
newline the default newline setting:
- CR, LF, CRLF, ANYCRLF, or ANY
+ CR, LF, CRLF, ANYCRLF, ANY, or NUL
exit code is always 0
bsr the default setting for what \eR matches:
ANYCRLF or ANY
@@ -320,8 +320,8 @@
when PCRE2 is compiled with either CR or CRLF as the default newline.
.P
The #newline_default command specifies a list of newline types that are
-acceptable as the default. The types must be one of CR, LF, CRLF, ANYCRLF, or
-ANY (in upper or lower case), for example:
+acceptable as the default. The types must be one of CR, LF, CRLF, ANYCRLF,
+ANY, or NUL (in upper or lower case), for example:
.sp
#newline_default LF Any anyCRLF
.sp
@@ -617,7 +617,7 @@
.P
The \fBnewline\fP modifier specifies which characters are to be interpreted as
newlines, both in the pattern and in subject lines. The type must be one of CR,
-LF, CRLF, ANYCRLF, or ANY (in upper or lower case).
+LF, CRLF, ANYCRLF, ANY, or NUL (in upper or lower case).
.
.
.SS "Information about a pattern"
@@ -1792,6 +1792,6 @@
.rs
.sp
.nf
-Last updated: 17 May 2017
+Last updated: 26 May 2017
Copyright (c) 1997-2017 University of Cambridge.
.fi
Modified: code/trunk/doc/pcre2test.txt
===================================================================
--- code/trunk/doc/pcre2test.txt 2017-05-25 16:34:22 UTC (rev 805)
+++ code/trunk/doc/pcre2test.txt 2017-05-26 17:14:36 UTC (rev 806)
@@ -141,7 +141,7 @@
linksize the configured internal link size (2, 3, or 4)
exit code is set to the link size
newline the default newline setting:
- CR, LF, CRLF, ANYCRLF, or ANY
+ CR, LF, CRLF, ANYCRLF, ANY, or NUL
exit code is always 0
bsr the default setting for what \R matches:
ANYCRLF or ANY
@@ -306,7 +306,7 @@
The #newline_default command specifies a list of newline types that are
acceptable as the default. The types must be one of CR, LF, CRLF, ANY-
- CRLF, or ANY (in upper or lower case), for example:
+ CRLF, ANY, or NUL (in upper or lower case), for example:
#newline_default LF Any anyCRLF
@@ -594,7 +594,7 @@
The newline modifier specifies which characters are to be interpreted
as newlines, both in the pattern and in subject lines. The type must be
- one of CR, LF, CRLF, ANYCRLF, or ANY (in upper or lower case).
+ one of CR, LF, CRLF, ANYCRLF, ANY, or NUL (in upper or lower case).
Information about a pattern
@@ -1650,5 +1650,5 @@
REVISION
- Last updated: 17 May 2017
+ Last updated: 26 May 2017
Copyright (c) 1997-2017 University of Cambridge.
Modified: code/trunk/src/config.h.in
===================================================================
--- code/trunk/src/config.h.in 2017-05-25 16:34:22 UTC (rev 805)
+++ code/trunk/src/config.h.in 2017-05-26 17:14:36 UTC (rev 806)
@@ -179,8 +179,8 @@
/* The value of NEWLINE_DEFAULT determines the default newline character
sequence. PCRE2 client programs can override this by selecting other values
- at run time. The valid values are 1 (CR), 2 (LF), 3 (CRLF), 4 (ANY), and 5
- (ANYCRLF). */
+ at run time. The valid values are 1 (CR), 2 (LF), 3 (CRLF), 4 (ANY), 5
+ (ANYCRLF), and 6 (NUL). */
#undef NEWLINE_DEFAULT
/* Name of package */
Modified: code/trunk/src/pcre2.h
===================================================================
--- code/trunk/src/pcre2.h 2017-05-25 16:34:22 UTC (rev 805)
+++ code/trunk/src/pcre2.h 2017-05-26 17:14:36 UTC (rev 806)
@@ -201,6 +201,7 @@
#define PCRE2_NEWLINE_CRLF 3
#define PCRE2_NEWLINE_ANY 4
#define PCRE2_NEWLINE_ANYCRLF 5
+#define PCRE2_NEWLINE_NUL 6
#define PCRE2_BSR_UNICODE 1
#define PCRE2_BSR_ANYCRLF 2
Modified: code/trunk/src/pcre2.h.in
===================================================================
--- code/trunk/src/pcre2.h.in 2017-05-25 16:34:22 UTC (rev 805)
+++ code/trunk/src/pcre2.h.in 2017-05-26 17:14:36 UTC (rev 806)
@@ -201,6 +201,7 @@
#define PCRE2_NEWLINE_CRLF 3
#define PCRE2_NEWLINE_ANY 4
#define PCRE2_NEWLINE_ANYCRLF 5
+#define PCRE2_NEWLINE_NUL 6
#define PCRE2_BSR_UNICODE 1
#define PCRE2_BSR_ANYCRLF 2
Modified: code/trunk/src/pcre2_compile.c
===================================================================
--- code/trunk/src/pcre2_compile.c 2017-05-25 16:34:22 UTC (rev 805)
+++ code/trunk/src/pcre2_compile.c 2017-05-26 17:14:36 UTC (rev 806)
@@ -760,6 +760,7 @@
{ (uint8_t *)STRING_LF_RIGHTPAR, 3, PSO_NL, PCRE2_NEWLINE_LF },
{ (uint8_t *)STRING_CRLF_RIGHTPAR, 5, PSO_NL, PCRE2_NEWLINE_CRLF },
{ (uint8_t *)STRING_ANY_RIGHTPAR, 4, PSO_NL, PCRE2_NEWLINE_ANY },
+ { (uint8_t *)STRING_NUL_RIGHTPAR, 4, PSO_NL, PCRE2_NEWLINE_NUL },
{ (uint8_t *)STRING_ANYCRLF_RIGHTPAR, 8, PSO_NL, PCRE2_NEWLINE_ANYCRLF },
{ (uint8_t *)STRING_BSR_ANYCRLF_RIGHTPAR, 12, PSO_BSR, PCRE2_BSR_ANYCRLF },
{ (uint8_t *)STRING_BSR_UNICODE_RIGHTPAR, 12, PSO_BSR, PCRE2_BSR_UNICODE }
@@ -1911,7 +1912,7 @@
{
if (ptr >= cb->end_pattern) goto ERROR_RETURN;
c = *ptr++;
- if (c == CHAR_NULL) goto ERROR_RETURN;
+ if (c == CHAR_NUL) goto ERROR_RETURN;
if (c == CHAR_RIGHT_CURLY_BRACKET) break;
name[i] = c;
}
@@ -6150,7 +6151,7 @@
}
else *callout_string++ = *pp++;
}
- *callout_string++ = CHAR_NULL;
+ *callout_string++ = CHAR_NUL;
/* Set the length of the entire item, the advance to its end. */
@@ -9160,6 +9161,11 @@
cb.nl[0] = CHAR_NL;
break;
+ case PCRE2_NEWLINE_NUL:
+ cb.nllen = 1;
+ cb.nl[0] = CHAR_NUL;
+ break;
+
case PCRE2_NEWLINE_CRLF:
cb.nllen = 2;
cb.nl[0] = CHAR_CR;
Modified: code/trunk/src/pcre2_context.c
===================================================================
--- code/trunk/src/pcre2_context.c 2017-05-25 16:34:22 UTC (rev 805)
+++ code/trunk/src/pcre2_context.c 2017-05-26 17:14:36 UTC (rev 806)
@@ -359,6 +359,7 @@
case PCRE2_NEWLINE_CRLF:
case PCRE2_NEWLINE_ANY:
case PCRE2_NEWLINE_ANYCRLF:
+ case PCRE2_NEWLINE_NUL:
ccontext->newline_convention = newline;
return 0;
Modified: code/trunk/src/pcre2_convert.c
===================================================================
--- code/trunk/src/pcre2_convert.c 2017-05-25 16:34:22 UTC (rev 805)
+++ code/trunk/src/pcre2_convert.c 2017-05-26 17:14:36 UTC (rev 806)
@@ -505,7 +505,7 @@
while (TRUE)
{
- if (*class_ptr == CHAR_NULL) return 0;
+ if (*class_ptr == CHAR_NUL) return 0;
pattern = start;
@@ -1021,7 +1021,7 @@
if (in_atomic)
convert_glob_write(&out, CHAR_RIGHT_PARENTHESIS);
- convert_glob_write(&out, CHAR_NULL);
+ convert_glob_write(&out, CHAR_NUL);
result = 0;
if (!dummyrun && out.output_size != (PCRE2_SIZE) (out.output - use_buffer))
Modified: code/trunk/src/pcre2_dfa_match.c
===================================================================
--- code/trunk/src/pcre2_dfa_match.c 2017-05-25 16:34:22 UTC (rev 805)
+++ code/trunk/src/pcre2_dfa_match.c 2017-05-26 17:14:36 UTC (rev 806)
@@ -3269,6 +3269,11 @@
mb->nl[0] = CHAR_NL;
break;
+ case PCRE2_NEWLINE_NUL:
+ mb->nllen = 1;
+ mb->nl[0] = CHAR_NUL;
+ break;
+
case PCRE2_NEWLINE_CRLF:
mb->nllen = 2;
mb->nl[0] = CHAR_CR;
Modified: code/trunk/src/pcre2_error.c
===================================================================
--- code/trunk/src/pcre2_error.c 2017-05-25 16:34:22 UTC (rev 805)
+++ code/trunk/src/pcre2_error.c 2017-05-26 17:14:36 UTC (rev 806)
@@ -307,8 +307,8 @@
for (; n > 0; n--)
{
- while (*message++ != CHAR_NULL) {};
- if (*message == CHAR_NULL) return PCRE2_ERROR_BADDATA;
+ while (*message++ != CHAR_NUL) {};
+ if (*message == CHAR_NUL) return PCRE2_ERROR_BADDATA;
}
for (i = 0; *message != 0; i++)
Modified: code/trunk/src/pcre2_internal.h
===================================================================
--- code/trunk/src/pcre2_internal.h 2017-05-25 16:34:22 UTC (rev 805)
+++ code/trunk/src/pcre2_internal.h 2017-05-26 17:14:36 UTC (rev 806)
@@ -678,7 +678,7 @@
/* The remaining definitions work in both environments. */
-#define CHAR_NULL '\0'
+#define CHAR_NUL '\0'
#define CHAR_HT '\t'
#define CHAR_VT '\v'
#define CHAR_FF '\f'
@@ -919,6 +919,7 @@
#define STRING_CRLF_RIGHTPAR "CRLF)"
#define STRING_ANY_RIGHTPAR "ANY)"
#define STRING_ANYCRLF_RIGHTPAR "ANYCRLF)"
+#define STRING_NUL_RIGHTPAR "NUL)"
#define STRING_BSR_ANYCRLF_RIGHTPAR "BSR_ANYCRLF)"
#define STRING_BSR_UNICODE_RIGHTPAR "BSR_UNICODE)"
#define STRING_UTF8_RIGHTPAR "UTF8)"
@@ -956,7 +957,7 @@
#define CHAR_ESC '\033'
#define CHAR_DEL '\177'
-#define CHAR_NULL '\0'
+#define CHAR_NUL '\0'
#define CHAR_SPACE '\040'
#define CHAR_EXCLAMATION_MARK '\041'
#define CHAR_QUOTATION_MARK '\042'
@@ -1194,6 +1195,7 @@
#define STRING_CRLF_RIGHTPAR STR_C STR_R STR_L STR_F STR_RIGHT_PARENTHESIS
#define STRING_ANY_RIGHTPAR STR_A STR_N STR_Y STR_RIGHT_PARENTHESIS
#define STRING_ANYCRLF_RIGHTPAR STR_A STR_N STR_Y STR_C STR_R STR_L STR_F STR_RIGHT_PARENTHESIS
+#define STRING_NUL_RIGHTPAR STR_N STR_U STR_L STR_RIGHT_PARENTHESIS
#define STRING_BSR_ANYCRLF_RIGHTPAR STR_B STR_S STR_R STR_UNDERSCORE STR_A STR_N STR_Y STR_C STR_R STR_L STR_F STR_RIGHT_PARENTHESIS
#define STRING_BSR_UNICODE_RIGHTPAR STR_B STR_S STR_R STR_UNDERSCORE STR_U STR_N STR_I STR_C STR_O STR_D STR_E STR_RIGHT_PARENTHESIS
#define STRING_UTF8_RIGHTPAR STR_U STR_T STR_F STR_8 STR_RIGHT_PARENTHESIS
Modified: code/trunk/src/pcre2_match.c
===================================================================
--- code/trunk/src/pcre2_match.c 2017-05-25 16:34:22 UTC (rev 805)
+++ code/trunk/src/pcre2_match.c 2017-05-26 17:14:36 UTC (rev 806)
@@ -6246,6 +6246,11 @@
mb->nl[0] = CHAR_NL;
break;
+ case PCRE2_NEWLINE_NUL:
+ mb->nllen = 1;
+ mb->nl[0] = CHAR_NUL;
+ break;
+
case PCRE2_NEWLINE_CRLF:
mb->nllen = 2;
mb->nl[0] = CHAR_CR;
Modified: code/trunk/src/pcre2grep.c
===================================================================
--- code/trunk/src/pcre2grep.c 2017-05-25 16:34:22 UTC (rev 805)
+++ code/trunk/src/pcre2grep.c 2017-05-26 17:14:36 UTC (rev 806)
@@ -404,7 +404,7 @@
{ OP_U32NUMBER, N_M_LIMIT_DEP, &depth_limit, "depth-limit=number", "set PCRE2 depth limit option" },
{ OP_U32NUMBER, N_M_LIMIT_DEP, &depth_limit, "recursion-limit=number", "obsolete synonym for depth-limit" },
{ OP_NODATA, 'M', NULL, "multiline", "run in multiline mode" },
- { OP_STRING, 'N', &newline_arg, "newline=type", "set newline type (CR, LF, CRLF, ANYCRLF or ANY)" },
+ { OP_STRING, 'N', &newline_arg, "newline=type", "set newline type (CR, LF, CRLF, ANYCRLF, ANY, or NUL)" },
{ OP_NODATA, 'n', NULL, "line-number", "print line number with output lines" },
#ifdef SUPPORT_PCRE2GREP_JIT
{ OP_NODATA, N_NOJIT, NULL, "no-jit", "do not use just-in-time compiler optimization" },
@@ -439,7 +439,7 @@
of PCRE2_NEWLINE_xx in pcre2.h. */
static const char *newlines[] = {
- "DEFAULT", "CR", "LF", "CRLF", "ANY", "ANYCRLF" };
+ "DEFAULT", "CR", "LF", "CRLF", "ANY", "ANYCRLF", "NUL" };
/* Tables for prefixing and suffixing patterns, according to the -w, -x, and -F
options. These set the 1, 2, and 4 bits in process_options, respectively. Note
@@ -1337,6 +1337,16 @@
*lenptr = 0;
return endptr;
+ case PCRE2_NEWLINE_NUL:
+ while (p < endptr && *p != '\0') p++;
+ if (p < endptr)
+ {
+ *lenptr = 1;
+ return p + 1;
+ }
+ *lenptr = 0;
+ return endptr;
+
case PCRE2_NEWLINE_CRLF:
for (;;)
{
@@ -1488,6 +1498,11 @@
while (p > startptr && p[-1] != '\n') p--;
return p;
+ case PCRE2_NEWLINE_NUL:
+ p--;
+ while (p > startptr && p[-1] != '\0') p--;
+ return p;
+
case PCRE2_NEWLINE_CRLF:
for (;;)
{
@@ -2319,12 +2334,13 @@
/* Unless binary-files=text, see if we have a binary file. This uses the same
rule as GNU grep, namely, a search for a binary zero byte near the start of the
-file. */
+file. However, when the newline convention is binary zero, we can't do this. */
if (binary_files != BIN_TEXT)
{
- binary =
- memchr(main_buffer, 0, (bufflength > 1024)? 1024 : bufflength) != NULL;
+ if (endlinetype != PCRE2_NEWLINE_NUL)
+ binary = memchr(main_buffer, 0, (bufflength > 1024)? 1024 : bufflength)
+ != NULL;
if (binary && binary_files == BIN_NOMATCH) return 1;
}
Modified: code/trunk/src/pcre2test.c
===================================================================
--- code/trunk/src/pcre2test.c 2017-05-25 16:34:22 UTC (rev 805)
+++ code/trunk/src/pcre2test.c 2017-05-26 17:14:36 UTC (rev 806)
@@ -390,7 +390,7 @@
of PCRE2_NEWLINE_xx in pcre2.h. */
static const char *newlines[] = {
- "DEFAULT", "CR", "LF", "CRLF", "ANY", "ANYCRLF" };
+ "DEFAULT", "CR", "LF", "CRLF", "ANY", "ANYCRLF", "NUL" };
/* Structure and table for handling pattern conversion types. */
@@ -4453,6 +4453,10 @@
fprintf(outfile, "Forced newline is any Unicode newline\n");
break;
+ case PCRE2_NEWLINE_NUL:
+ fprintf(outfile, "Forced newline is NUL\n");
+ break;
+
default:
break;
}
@@ -7635,7 +7639,7 @@
printf(" ebcdic-nl NL code if compiled for EBCDIC\n");
printf(" jit just-in-time compiler supported [0, 1]\n");
printf(" linksize internal link size [2, 3, 4]\n");
-printf(" newline newline type [CR, LF, CRLF, ANYCRLF, ANY]\n");
+printf(" newline newline type [CR, LF, CRLF, ANYCRLF, ANY, NUL]\n");
printf(" pcre2-8 8 bit library support enabled [0, 1]\n");
printf(" pcre2-16 16 bit library support enabled [0, 1]\n");
printf(" pcre2-32 32 bit library support enabled [0, 1]\n");
Modified: code/trunk/testdata/grepoutputN
===================================================================
--- code/trunk/testdata/grepoutputN 2017-05-25 16:34:22 UTC (rev 805)
+++ code/trunk/testdata/grepoutputN 2017-05-26 17:14:36 UTC (rev 806)
@@ -19,4 +19,5 @@
1:abc
2:def
3:ghi
-4:jkl
\ No newline at end of file
+4:jkl---------------------------- Test N7 ------------------------------
+1:abcZERO2:def
\ No newline at end of file
Modified: code/trunk/testdata/testinput2
===================================================================
--- code/trunk/testdata/testinput2 2017-05-25 16:34:22 UTC (rev 805)
+++ code/trunk/testdata/testinput2 2017-05-26 17:14:36 UTC (rev 806)
@@ -2257,7 +2257,25 @@
/(*CRLF).*/g
abc\r\ndef
+
+/(*NUL)^.*/
+ a\nb\x00ccc
+
+/(*NUL)^.*/s
+ a\nb\x00ccc
+
+/^x/m,newline=NUL
+ ab\x00xy
+
+/'#comment' 0d 0a 00 '^x\' 0a 'y'/x,newline=nul,hex
+ x\nyz
+/(*NUL)^X\NY/
+ X\nY
+ X\rY
+\= Expect no match
+ X\x00Y
+
/a\Rb/I,bsr=anycrlf
a\rb
a\nb
Modified: code/trunk/testdata/testinput6
===================================================================
--- code/trunk/testdata/testinput6 2017-05-25 16:34:22 UTC (rev 805)
+++ code/trunk/testdata/testinput6 2017-05-26 17:14:36 UTC (rev 806)
@@ -4911,4 +4911,22 @@
\= Expect no match
xyzabcdef
+/(*NUL)^.*/
+ a\nb\x00ccc
+
+/(*NUL)^.*/s
+ a\nb\x00ccc
+
+/^x/m,newline=nul
+ ab\x00xy
+
+/'#comment' 0d 0a 00 '^x\' 0a 'y'/x,newline=nul,hex
+ x\nyz
+
+/(*NUL)^X\NY/
+ X\nY
+ X\rY
+\= Expect no match
+ X\x00Y
+
# End of testinput6
Modified: code/trunk/testdata/testoutput2
===================================================================
--- code/trunk/testdata/testoutput2 2017-05-25 16:34:22 UTC (rev 805)
+++ code/trunk/testdata/testoutput2 2017-05-26 17:14:36 UTC (rev 806)
@@ -8313,7 +8313,32 @@
0:
0: def
0:
+
+/(*NUL)^.*/
+ a\nb\x00ccc
+ 0: a\x0ab
+
+/(*NUL)^.*/s
+ a\nb\x00ccc
+ 0: a\x0ab\x00ccc
+
+/^x/m,newline=NUL
+ ab\x00xy
+ 0: x
+
+/'#comment' 0d 0a 00 '^x\' 0a 'y'/x,newline=nul,hex
+ x\nyz
+ 0: x\x0ay
+/(*NUL)^X\NY/
+ X\nY
+ 0: X\x0aY
+ X\rY
+ 0: X\x0dY
+\= Expect no match
+ X\x00Y
+No match
+
/a\Rb/I,bsr=anycrlf
Capturing subpattern count = 0
\R matches CR, LF, or CRLF
Modified: code/trunk/testdata/testoutput6
===================================================================
--- code/trunk/testdata/testoutput6 2017-05-25 16:34:22 UTC (rev 805)
+++ code/trunk/testdata/testoutput6 2017-05-26 17:14:36 UTC (rev 806)
@@ -7721,4 +7721,29 @@
xyzabcdef
No match
+/(*NUL)^.*/
+ a\nb\x00ccc
+ 0: a\x0ab
+
+/(*NUL)^.*/s
+ a\nb\x00ccc
+ 0: a\x0ab\x00ccc
+
+/^x/m,newline=nul
+ ab\x00xy
+ 0: x
+
+/'#comment' 0d 0a 00 '^x\' 0a 'y'/x,newline=nul,hex
+ x\nyz
+ 0: x\x0ay
+
+/(*NUL)^X\NY/
+ X\nY
+ 0: X\x0aY
+ X\rY
+ 0: X\x0dY
+\= Expect no match
+ X\x00Y
+No match
+
# End of testinput6
