Revision: 382
http://www.exim.org/viewvc/pcre2?view=rev&revision=382
Author: ph10
Date: 2015-10-07 18:37:57 +0100 (Wed, 07 Oct 2015)
Log Message:
-----------
Remove src/config.h, accidentally added to the repo.
Removed Paths:
-------------
code/trunk/src/config.h
Deleted: code/trunk/src/config.h
===================================================================
--- code/trunk/src/config.h 2015-10-07 17:32:48 UTC (rev 381)
+++ code/trunk/src/config.h 2015-10-07 17:37:57 UTC (rev 382)
@@ -1,295 +0,0 @@
-/* src/config.h. Generated from config.h.in by configure. */
-/* src/config.h.in. Generated from configure.ac by autoheader. */
-
-
-/* PCRE2 is written in Standard C, but there are a few non-standard things it
-can cope with, allowing it to run on SunOS4 and other "close to standard"
-systems.
-
-In environments that support the GNU autotools, config.h.in is converted into
-config.h by the "configure" script. In environments that use CMake,
-config-cmake.in is converted into config.h. If you are going to build PCRE2 "by
-hand" without using "configure" or CMake, you should copy the distributed
-config.h.generic to config.h, and edit the macro definitions to be the way you
-need them. You must then add -DHAVE_CONFIG_H to all of your compile commands,
-so that config.h is included at the start of every source.
-
-Alternatively, you can avoid editing by using -D on the compiler command line
-to set the macro values. In this case, you do not have to set -DHAVE_CONFIG_H,
-but if you do, default values will be taken from config.h for non-boolean
-macros that are not defined on the command line.
-
-Boolean macros such as HAVE_STDLIB_H and SUPPORT_PCRE2_8 should either be defined
-(conventionally to 1) for TRUE, and not defined at all for FALSE. All such
-macros are listed as a commented #undef in config.h.generic. Macros such as
-MATCH_LIMIT, whose actual value is relevant, have defaults defined, but are
-surrounded by #ifndef/#endif lines so that the value can be overridden by -D.
-
-PCRE2 uses memmove() if HAVE_MEMMOVE is defined; otherwise it uses bcopy() if
-HAVE_BCOPY is defined. If your system has neither bcopy() nor memmove(), make
-sure both macros are undefined; an emulation function will then be used. */
-
-/* By default, the \R escape sequence matches any Unicode line ending
- character or sequence of characters. If BSR_ANYCRLF is defined (to any
- value), this is changed so that backslash-R matches only CR, LF, or CRLF.
- The build-time default can be overridden by the user of PCRE2 at runtime.
- */
-/* #undef BSR_ANYCRLF */
-
-/* If you are compiling for a system that uses EBCDIC instead of ASCII
- character codes, define this macro to any value. When EBCDIC is set, PCRE2
- assumes that all input strings are in EBCDIC. If you do not define this
- macro, PCRE2 will assume input strings are ASCII or UTF-8/16/32 Unicode. It
- is not possible to build a version of PCRE2 that supports both EBCDIC and
- UTF-8/16/32. */
-/* #undef EBCDIC */
-
-/* In an EBCDIC environment, define this macro to any value to arrange for the
- NL character to be 0x25 instead of the default 0x15. NL plays the role that
- LF does in an ASCII/Unicode environment. */
-/* #undef EBCDIC_NL25 */
-
-/* Define to 1 if you have the `bcopy' function. */
-#define HAVE_BCOPY 1
-
-/* Define to 1 if you have the <bzlib.h> header file. */
-#define HAVE_BZLIB_H 1
-
-/* Define to 1 if you have the <dirent.h> header file. */
-#define HAVE_DIRENT_H 1
-
-/* Define to 1 if you have the <dlfcn.h> header file. */
-#define HAVE_DLFCN_H 1
-
-/* Define to 1 if you have the <editline/readline.h> header file. */
-/* #undef HAVE_EDITLINE_READLINE_H */
-
-/* Define to 1 if you have the <edit/readline/readline.h> header file. */
-/* #undef HAVE_EDIT_READLINE_READLINE_H */
-
-/* Define to 1 if you have the <inttypes.h> header file. */
-#define HAVE_INTTYPES_H 1
-
-/* Define to 1 if you have the <limits.h> header file. */
-#define HAVE_LIMITS_H 1
-
-/* Define to 1 if you have the `memmove' function. */
-#define HAVE_MEMMOVE 1
-
-/* Define to 1 if you have the <memory.h> header file. */
-#define HAVE_MEMORY_H 1
-
-/* Define if you have POSIX threads libraries and header files. */
-#define HAVE_PTHREAD 1
-
-/* Have PTHREAD_PRIO_INHERIT. */
-#define HAVE_PTHREAD_PRIO_INHERIT 1
-
-/* Define to 1 if you have the <readline/history.h> header file. */
-#define HAVE_READLINE_HISTORY_H 1
-
-/* Define to 1 if you have the <readline/readline.h> header file. */
-#define HAVE_READLINE_READLINE_H 1
-
-/* Define to 1 if you have the <stdint.h> header file. */
-#define HAVE_STDINT_H 1
-
-/* Define to 1 if you have the <stdlib.h> header file. */
-#define HAVE_STDLIB_H 1
-
-/* Define to 1 if you have the `strerror' function. */
-#define HAVE_STRERROR 1
-
-/* Define to 1 if you have the <strings.h> header file. */
-#define HAVE_STRINGS_H 1
-
-/* Define to 1 if you have the <string.h> header file. */
-#define HAVE_STRING_H 1
-
-/* Define to 1 if you have the <sys/stat.h> header file. */
-#define HAVE_SYS_STAT_H 1
-
-/* Define to 1 if you have the <sys/types.h> header file. */
-#define HAVE_SYS_TYPES_H 1
-
-/* Define to 1 if you have the <unistd.h> header file. */
-#define HAVE_UNISTD_H 1
-
-/* Define to 1 if the compiler supports simple visibility declarations. */
-#define HAVE_VISIBILITY 1
-
-/* Define to 1 if you have the <windows.h> header file. */
-/* #undef HAVE_WINDOWS_H */
-
-/* Define to 1 if you have the <zlib.h> header file. */
-#define HAVE_ZLIB_H 1
-
-/* PCRE2 uses recursive function calls to handle backtracking while matching.
- This can sometimes be a problem on systems that have stacks of limited
- size. Define HEAP_MATCH_RECURSE to any value to get a version that doesn't
- use recursion in the match() function; instead it creates its own stack by
- steam using memory from the heap. For more detail, see the comments and
- other stuff just above the match() function. */
-/* #undef HEAP_MATCH_RECURSE */
-
-/* The value of LINK_SIZE determines the number of bytes used to store links
- as offsets within the compiled regex. The default is 2, which allows for
- compiled patterns up to 64K long. This covers the vast majority of cases.
- However, PCRE2 can also be compiled to use 3 or 4 bytes instead. This
- allows for longer patterns in extreme cases. */
-#define LINK_SIZE 2
-
-/* Define to the sub-directory where libtool stores uninstalled libraries. */
-#define LT_OBJDIR ".libs/"
-
-/* The value of MATCH_LIMIT determines the default number of times the
- internal match() function can be called during a single execution of
- pcre2_match(). There is a runtime interface for setting a different limit.
- The limit exists in order to catch runaway regular expressions that take
- for ever to determine that they do not match. The default is set very large
- so that it does not accidentally catch legitimate cases. */
-#define MATCH_LIMIT 10000000
-
-/* The above limit applies to all calls of match(), whether or not they
- increase the recursion depth. In some environments it is desirable to limit
- the depth of recursive calls of match() more strictly, in order to restrict
- the maximum amount of stack (or heap, if HEAP_MATCH_RECURSE is defined)
- that is used. The value of MATCH_LIMIT_RECURSION applies only to recursive
- calls of match(). To have any useful effect, it must be less than the value
- of MATCH_LIMIT. The default is to use the same value as MATCH_LIMIT. There
- is a runtime method for setting a different limit. */
-#define MATCH_LIMIT_RECURSION MATCH_LIMIT
-
-/* This limit is parameterized just in case anybody ever wants to change it.
- Care must be taken if it is increased, because it guards against integer
- overflow caused by enormously large patterns. */
-#define MAX_NAME_COUNT 10000
-
-/* This limit is parameterized just in case anybody ever wants to change it.
- Care must be taken if it is increased, because it guards against integer
- overflow caused by enormously large patterns. */
-#define MAX_NAME_SIZE 32
-
-/* The value of NEWLINE_DEFAULT determines the default newline character
- sequence. PCRE2 client programs can override this by selecting other values
- at run time. The valid values are 1 (CR), 2 (LF), 3 (CRLF), 4 (ANY), and 5
- (ANYCRLF). */
-#define NEWLINE_DEFAULT 2
-
-/* Name of package */
-#define PACKAGE "pcre2"
-
-/* Define to the address where bug reports for this package should be sent. */
-#define PACKAGE_BUGREPORT ""
-
-/* Define to the full name of this package. */
-#define PACKAGE_NAME "PCRE2"
-
-/* Define to the full name and version of this package. */
-#define PACKAGE_STRING "PCRE2 10.21-RC1"
-
-/* Define to the one symbol short name of this package. */
-#define PACKAGE_TARNAME "pcre2"
-
-/* Define to the home page for this package. */
-#define PACKAGE_URL ""
-
-/* Define to the version of this package. */
-#define PACKAGE_VERSION "10.21-RC1"
-
-/* The value of PARENS_NEST_LIMIT specifies the maximum depth of nested
- parentheses (of any kind) in a pattern. This limits the amount of system
- stack that is used while compiling a pattern. */
-#define PARENS_NEST_LIMIT 250
-
-/* The value of PCRE2GREP_BUFSIZE determines the size of buffer used by
- pcre2grep to hold parts of the file it is searching. This is also the
- minimum value. The actual amount of memory used by pcre2grep is three times
- this number, because it allows for the buffering of "before" and "after"
- lines. */
-#define PCRE2GREP_BUFSIZE 20480
-
-/* to make a symbol visible */
-#define PCRE2POSIX_EXP_DECL extern __attribute__ ((visibility ("default")))
-
-/* to make a symbol visible */
-#define PCRE2POSIX_EXP_DEFN extern __attribute__ ((visibility ("default")))
-
-/* Define to any value to include debugging code. */
-/* #undef PCRE2_DEBUG */
-
-/* to make a symbol visible */
-#define PCRE2_EXP_DECL extern __attribute__ ((visibility ("default")))
-
-
-/* If you are compiling for a system other than a Unix-like system or
- Win32, and it needs some magic to be inserted before the definition
- of a function that is exported by the library, define this macro to
- contain the relevant magic. If you do not define this macro, a suitable
- __declspec value is used for Windows systems; in other environments
- "extern" is used for a C compiler and "extern C" for a C++ compiler.
- This macro apears at the start of every exported function that is part
- of the external API. It does not appear on functions that are "external"
- in the C sense, but which are internal to the library. */
-#define PCRE2_EXP_DEFN __attribute__ ((visibility ("default")))
-
-/* Define to any value if linking statically (TODO: make nice with Libtool) */
-#define PCRE2_STATIC 1
-
-/* Define to necessary symbol if this constant uses a non-standard name on
- your system. */
-/* #undef PTHREAD_CREATE_JOINABLE */
-
-/* Define to 1 if you have the ANSI C header files. */
-#define STDC_HEADERS 1
-
-/* Define to any value to enable support for Just-In-Time compiling. */
-#define SUPPORT_JIT /**/
-
-/* Define to any value to allow pcre2grep to be linked with libbz2, so that it
- is able to handle .bz2 files. */
-#define SUPPORT_LIBBZ2 /**/
-
-/* Define to any value to allow pcre2test to be linked with libedit. */
-/* #undef SUPPORT_LIBEDIT */
-
-/* Define to any value to allow pcre2test to be linked with libreadline. */
-#define SUPPORT_LIBREADLINE /**/
-
-/* Define to any value to allow pcre2grep to be linked with libz, so that it
- is able to handle .gz files. */
-#define SUPPORT_LIBZ /**/
-
-/* Define to any value to enable JIT support in pcre2grep. */
-#define SUPPORT_PCRE2GREP_JIT /**/
-
-/* Define to any value to enable the 16 bit PCRE2 library. */
-#define SUPPORT_PCRE2_16 /**/
-
-/* Define to any value to enable the 32 bit PCRE2 library. */
-#define SUPPORT_PCRE2_32 /**/
-
-/* Define to any value to enable the 8 bit PCRE2 library. */
-#define SUPPORT_PCRE2_8 /**/
-
-/* Define to any value to enable support for Unicode and UTF encoding. This
- will work even in an EBCDIC environment, but it is incompatible with the
- EBCDIC macro. That is, PCRE2 can support *either* EBCDIC code *or*
- ASCII/Unicode, but not both at once. */
-#define SUPPORT_UNICODE /**/
-
-/* Define to any value for valgrind support to find invalid memory reads. */
-#define SUPPORT_VALGRIND /**/
-
-/* Version number of package */
-#define VERSION "10.21-RC1"
-
-/* Define to empty if `const' does not conform to ANSI C. */
-/* #undef const */
-
-/* Define to the type of a signed integer type of width exactly 64 bits if
- such a type exists and the standard includes do not define it. */
-/* #undef int64_t */
-
-/* Define to `unsigned int' if <sys/types.h> does not define. */
-/* #undef size_t */
