Revision: 377
http://www.exim.org/viewvc/pcre2?view=rev&revision=377
Author: ph10
Date: 2015-09-24 18:40:38 +0100 (Thu, 24 Sep 2015)
Log Message:
-----------
Put config files in the repo for those without autotools.
Added Paths:
-----------
code/trunk/src/config.h
code/trunk/src/config.h.in
Property Changed:
----------------
code/trunk/
code/trunk/src/
Index: code/trunk
===================================================================
--- code/trunk 2015-09-23 11:49:03 UTC (rev 376)
+++ code/trunk 2015-09-24 17:40:38 UTC (rev 377)
Property changes on: code/trunk
___________________________________________________________________
Modified: svn:ignore
## -11,9 +11,6 ##
autom4te.cache
compile
config.guess
-config.h
-config.h.generic
-config.h.in
config.log
config.status
config.sub
Index: code/trunk/src
===================================================================
--- code/trunk/src 2015-09-23 11:49:03 UTC (rev 376)
+++ code/trunk/src 2015-09-24 17:40:38 UTC (rev 377)
Property changes on: code/trunk/src
___________________________________________________________________
Modified: svn:ignore
## -1,7 +1,5 ##
.deps
.dirstamp
-config.h
-config.h.in
pcre2.h
pcre2_chartables.c
stamp-h1
Added: code/trunk/src/config.h
===================================================================
--- code/trunk/src/config.h (rev 0)
+++ code/trunk/src/config.h 2015-09-24 17:40:38 UTC (rev 377)
@@ -0,0 +1,295 @@
+/* src/config.h. Generated from config.h.in by configure. */
+/* src/config.h.in. Generated from configure.ac by autoheader. */
+
+
+/* PCRE2 is written in Standard C, but there are a few non-standard things it
+can cope with, allowing it to run on SunOS4 and other "close to standard"
+systems.
+
+In environments that support the GNU autotools, config.h.in is converted into
+config.h by the "configure" script. In environments that use CMake,
+config-cmake.in is converted into config.h. If you are going to build PCRE2 "by
+hand" without using "configure" or CMake, you should copy the distributed
+config.h.generic to config.h, and edit the macro definitions to be the way you
+need them. You must then add -DHAVE_CONFIG_H to all of your compile commands,
+so that config.h is included at the start of every source.
+
+Alternatively, you can avoid editing by using -D on the compiler command line
+to set the macro values. In this case, you do not have to set -DHAVE_CONFIG_H,
+but if you do, default values will be taken from config.h for non-boolean
+macros that are not defined on the command line.
+
+Boolean macros such as HAVE_STDLIB_H and SUPPORT_PCRE2_8 should either be defined
+(conventionally to 1) for TRUE, and not defined at all for FALSE. All such
+macros are listed as a commented #undef in config.h.generic. Macros such as
+MATCH_LIMIT, whose actual value is relevant, have defaults defined, but are
+surrounded by #ifndef/#endif lines so that the value can be overridden by -D.
+
+PCRE2 uses memmove() if HAVE_MEMMOVE is defined; otherwise it uses bcopy() if
+HAVE_BCOPY is defined. If your system has neither bcopy() nor memmove(), make
+sure both macros are undefined; an emulation function will then be used. */
+
+/* By default, the \R escape sequence matches any Unicode line ending
+ character or sequence of characters. If BSR_ANYCRLF is defined (to any
+ value), this is changed so that backslash-R matches only CR, LF, or CRLF.
+ The build-time default can be overridden by the user of PCRE2 at runtime.
+ */
+/* #undef BSR_ANYCRLF */
+
+/* If you are compiling for a system that uses EBCDIC instead of ASCII
+ character codes, define this macro to any value. When EBCDIC is set, PCRE2
+ assumes that all input strings are in EBCDIC. If you do not define this
+ macro, PCRE2 will assume input strings are ASCII or UTF-8/16/32 Unicode. It
+ is not possible to build a version of PCRE2 that supports both EBCDIC and
+ UTF-8/16/32. */
+/* #undef EBCDIC */
+
+/* In an EBCDIC environment, define this macro to any value to arrange for the
+ NL character to be 0x25 instead of the default 0x15. NL plays the role that
+ LF does in an ASCII/Unicode environment. */
+/* #undef EBCDIC_NL25 */
+
+/* Define to 1 if you have the `bcopy' function. */
+#define HAVE_BCOPY 1
+
+/* Define to 1 if you have the <bzlib.h> header file. */
+#define HAVE_BZLIB_H 1
+
+/* Define to 1 if you have the <dirent.h> header file. */
+#define HAVE_DIRENT_H 1
+
+/* Define to 1 if you have the <dlfcn.h> header file. */
+#define HAVE_DLFCN_H 1
+
+/* Define to 1 if you have the <editline/readline.h> header file. */
+/* #undef HAVE_EDITLINE_READLINE_H */
+
+/* Define to 1 if you have the <edit/readline/readline.h> header file. */
+/* #undef HAVE_EDIT_READLINE_READLINE_H */
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+#define HAVE_INTTYPES_H 1
+
+/* Define to 1 if you have the <limits.h> header file. */
+#define HAVE_LIMITS_H 1
+
+/* Define to 1 if you have the `memmove' function. */
+#define HAVE_MEMMOVE 1
+
+/* Define to 1 if you have the <memory.h> header file. */
+#define HAVE_MEMORY_H 1
+
+/* Define if you have POSIX threads libraries and header files. */
+#define HAVE_PTHREAD 1
+
+/* Have PTHREAD_PRIO_INHERIT. */
+#define HAVE_PTHREAD_PRIO_INHERIT 1
+
+/* Define to 1 if you have the <readline/history.h> header file. */
+#define HAVE_READLINE_HISTORY_H 1
+
+/* Define to 1 if you have the <readline/readline.h> header file. */
+#define HAVE_READLINE_READLINE_H 1
+
+/* Define to 1 if you have the <stdint.h> header file. */
+#define HAVE_STDINT_H 1
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#define HAVE_STDLIB_H 1
+
+/* Define to 1 if you have the `strerror' function. */
+#define HAVE_STRERROR 1
+
+/* Define to 1 if you have the <strings.h> header file. */
+#define HAVE_STRINGS_H 1
+
+/* Define to 1 if you have the <string.h> header file. */
+#define HAVE_STRING_H 1
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#define HAVE_SYS_STAT_H 1
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#define HAVE_SYS_TYPES_H 1
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#define HAVE_UNISTD_H 1
+
+/* Define to 1 if the compiler supports simple visibility declarations. */
+#define HAVE_VISIBILITY 1
+
+/* Define to 1 if you have the <windows.h> header file. */
+/* #undef HAVE_WINDOWS_H */
+
+/* Define to 1 if you have the <zlib.h> header file. */
+#define HAVE_ZLIB_H 1
+
+/* PCRE2 uses recursive function calls to handle backtracking while matching.
+ This can sometimes be a problem on systems that have stacks of limited
+ size. Define HEAP_MATCH_RECURSE to any value to get a version that doesn't
+ use recursion in the match() function; instead it creates its own stack by
+ steam using memory from the heap. For more detail, see the comments and
+ other stuff just above the match() function. */
+/* #undef HEAP_MATCH_RECURSE */
+
+/* The value of LINK_SIZE determines the number of bytes used to store links
+ as offsets within the compiled regex. The default is 2, which allows for
+ compiled patterns up to 64K long. This covers the vast majority of cases.
+ However, PCRE2 can also be compiled to use 3 or 4 bytes instead. This
+ allows for longer patterns in extreme cases. */
+#define LINK_SIZE 2
+
+/* Define to the sub-directory where libtool stores uninstalled libraries. */
+#define LT_OBJDIR ".libs/"
+
+/* The value of MATCH_LIMIT determines the default number of times the
+ internal match() function can be called during a single execution of
+ pcre2_match(). There is a runtime interface for setting a different limit.
+ The limit exists in order to catch runaway regular expressions that take
+ for ever to determine that they do not match. The default is set very large
+ so that it does not accidentally catch legitimate cases. */
+#define MATCH_LIMIT 10000000
+
+/* The above limit applies to all calls of match(), whether or not they
+ increase the recursion depth. In some environments it is desirable to limit
+ the depth of recursive calls of match() more strictly, in order to restrict
+ the maximum amount of stack (or heap, if HEAP_MATCH_RECURSE is defined)
+ that is used. The value of MATCH_LIMIT_RECURSION applies only to recursive
+ calls of match(). To have any useful effect, it must be less than the value
+ of MATCH_LIMIT. The default is to use the same value as MATCH_LIMIT. There
+ is a runtime method for setting a different limit. */
+#define MATCH_LIMIT_RECURSION MATCH_LIMIT
+
+/* This limit is parameterized just in case anybody ever wants to change it.
+ Care must be taken if it is increased, because it guards against integer
+ overflow caused by enormously large patterns. */
+#define MAX_NAME_COUNT 10000
+
+/* This limit is parameterized just in case anybody ever wants to change it.
+ Care must be taken if it is increased, because it guards against integer
+ overflow caused by enormously large patterns. */
+#define MAX_NAME_SIZE 32
+
+/* The value of NEWLINE_DEFAULT determines the default newline character
+ sequence. PCRE2 client programs can override this by selecting other values
+ at run time. The valid values are 1 (CR), 2 (LF), 3 (CRLF), 4 (ANY), and 5
+ (ANYCRLF). */
+#define NEWLINE_DEFAULT 2
+
+/* Name of package */
+#define PACKAGE "pcre2"
+
+/* Define to the address where bug reports for this package should be sent. */
+#define PACKAGE_BUGREPORT ""
+
+/* Define to the full name of this package. */
+#define PACKAGE_NAME "PCRE2"
+
+/* Define to the full name and version of this package. */
+#define PACKAGE_STRING "PCRE2 10.21-RC1"
+
+/* Define to the one symbol short name of this package. */
+#define PACKAGE_TARNAME "pcre2"
+
+/* Define to the home page for this package. */
+#define PACKAGE_URL ""
+
+/* Define to the version of this package. */
+#define PACKAGE_VERSION "10.21-RC1"
+
+/* The value of PARENS_NEST_LIMIT specifies the maximum depth of nested
+ parentheses (of any kind) in a pattern. This limits the amount of system
+ stack that is used while compiling a pattern. */
+#define PARENS_NEST_LIMIT 250
+
+/* The value of PCRE2GREP_BUFSIZE determines the size of buffer used by
+ pcre2grep to hold parts of the file it is searching. This is also the
+ minimum value. The actual amount of memory used by pcre2grep is three times
+ this number, because it allows for the buffering of "before" and "after"
+ lines. */
+#define PCRE2GREP_BUFSIZE 20480
+
+/* to make a symbol visible */
+#define PCRE2POSIX_EXP_DECL extern __attribute__ ((visibility ("default")))
+
+/* to make a symbol visible */
+#define PCRE2POSIX_EXP_DEFN extern __attribute__ ((visibility ("default")))
+
+/* Define to any value to include debugging code. */
+/* #undef PCRE2_DEBUG */
+
+/* to make a symbol visible */
+#define PCRE2_EXP_DECL extern __attribute__ ((visibility ("default")))
+
+
+/* If you are compiling for a system other than a Unix-like system or
+ Win32, and it needs some magic to be inserted before the definition
+ of a function that is exported by the library, define this macro to
+ contain the relevant magic. If you do not define this macro, a suitable
+ __declspec value is used for Windows systems; in other environments
+ "extern" is used for a C compiler and "extern C" for a C++ compiler.
+ This macro apears at the start of every exported function that is part
+ of the external API. It does not appear on functions that are "external"
+ in the C sense, but which are internal to the library. */
+#define PCRE2_EXP_DEFN __attribute__ ((visibility ("default")))
+
+/* Define to any value if linking statically (TODO: make nice with Libtool) */
+#define PCRE2_STATIC 1
+
+/* Define to necessary symbol if this constant uses a non-standard name on
+ your system. */
+/* #undef PTHREAD_CREATE_JOINABLE */
+
+/* Define to 1 if you have the ANSI C header files. */
+#define STDC_HEADERS 1
+
+/* Define to any value to enable support for Just-In-Time compiling. */
+#define SUPPORT_JIT /**/
+
+/* Define to any value to allow pcre2grep to be linked with libbz2, so that it
+ is able to handle .bz2 files. */
+#define SUPPORT_LIBBZ2 /**/
+
+/* Define to any value to allow pcre2test to be linked with libedit. */
+/* #undef SUPPORT_LIBEDIT */
+
+/* Define to any value to allow pcre2test to be linked with libreadline. */
+#define SUPPORT_LIBREADLINE /**/
+
+/* Define to any value to allow pcre2grep to be linked with libz, so that it
+ is able to handle .gz files. */
+#define SUPPORT_LIBZ /**/
+
+/* Define to any value to enable JIT support in pcre2grep. */
+#define SUPPORT_PCRE2GREP_JIT /**/
+
+/* Define to any value to enable the 16 bit PCRE2 library. */
+#define SUPPORT_PCRE2_16 /**/
+
+/* Define to any value to enable the 32 bit PCRE2 library. */
+#define SUPPORT_PCRE2_32 /**/
+
+/* Define to any value to enable the 8 bit PCRE2 library. */
+#define SUPPORT_PCRE2_8 /**/
+
+/* Define to any value to enable support for Unicode and UTF encoding. This
+ will work even in an EBCDIC environment, but it is incompatible with the
+ EBCDIC macro. That is, PCRE2 can support *either* EBCDIC code *or*
+ ASCII/Unicode, but not both at once. */
+#define SUPPORT_UNICODE /**/
+
+/* Define to any value for valgrind support to find invalid memory reads. */
+#define SUPPORT_VALGRIND /**/
+
+/* Version number of package */
+#define VERSION "10.21-RC1"
+
+/* Define to empty if `const' does not conform to ANSI C. */
+/* #undef const */
+
+/* Define to the type of a signed integer type of width exactly 64 bits if
+ such a type exists and the standard includes do not define it. */
+/* #undef int64_t */
+
+/* Define to `unsigned int' if <sys/types.h> does not define. */
+/* #undef size_t */
Added: code/trunk/src/config.h.in
===================================================================
--- code/trunk/src/config.h.in (rev 0)
+++ code/trunk/src/config.h.in 2015-09-24 17:40:38 UTC (rev 377)
@@ -0,0 +1,294 @@
+/* src/config.h.in. Generated from configure.ac by autoheader. */
+
+
+/* PCRE2 is written in Standard C, but there are a few non-standard things it
+can cope with, allowing it to run on SunOS4 and other "close to standard"
+systems.
+
+In environments that support the GNU autotools, config.h.in is converted into
+config.h by the "configure" script. In environments that use CMake,
+config-cmake.in is converted into config.h. If you are going to build PCRE2 "by
+hand" without using "configure" or CMake, you should copy the distributed
+config.h.generic to config.h, and edit the macro definitions to be the way you
+need them. You must then add -DHAVE_CONFIG_H to all of your compile commands,
+so that config.h is included at the start of every source.
+
+Alternatively, you can avoid editing by using -D on the compiler command line
+to set the macro values. In this case, you do not have to set -DHAVE_CONFIG_H,
+but if you do, default values will be taken from config.h for non-boolean
+macros that are not defined on the command line.
+
+Boolean macros such as HAVE_STDLIB_H and SUPPORT_PCRE2_8 should either be defined
+(conventionally to 1) for TRUE, and not defined at all for FALSE. All such
+macros are listed as a commented #undef in config.h.generic. Macros such as
+MATCH_LIMIT, whose actual value is relevant, have defaults defined, but are
+surrounded by #ifndef/#endif lines so that the value can be overridden by -D.
+
+PCRE2 uses memmove() if HAVE_MEMMOVE is defined; otherwise it uses bcopy() if
+HAVE_BCOPY is defined. If your system has neither bcopy() nor memmove(), make
+sure both macros are undefined; an emulation function will then be used. */
+
+/* By default, the \R escape sequence matches any Unicode line ending
+ character or sequence of characters. If BSR_ANYCRLF is defined (to any
+ value), this is changed so that backslash-R matches only CR, LF, or CRLF.
+ The build-time default can be overridden by the user of PCRE2 at runtime.
+ */
+#undef BSR_ANYCRLF
+
+/* If you are compiling for a system that uses EBCDIC instead of ASCII
+ character codes, define this macro to any value. When EBCDIC is set, PCRE2
+ assumes that all input strings are in EBCDIC. If you do not define this
+ macro, PCRE2 will assume input strings are ASCII or UTF-8/16/32 Unicode. It
+ is not possible to build a version of PCRE2 that supports both EBCDIC and
+ UTF-8/16/32. */
+#undef EBCDIC
+
+/* In an EBCDIC environment, define this macro to any value to arrange for the
+ NL character to be 0x25 instead of the default 0x15. NL plays the role that
+ LF does in an ASCII/Unicode environment. */
+#undef EBCDIC_NL25
+
+/* Define to 1 if you have the `bcopy' function. */
+#undef HAVE_BCOPY
+
+/* Define to 1 if you have the <bzlib.h> header file. */
+#undef HAVE_BZLIB_H
+
+/* Define to 1 if you have the <dirent.h> header file. */
+#undef HAVE_DIRENT_H
+
+/* Define to 1 if you have the <dlfcn.h> header file. */
+#undef HAVE_DLFCN_H
+
+/* Define to 1 if you have the <editline/readline.h> header file. */
+#undef HAVE_EDITLINE_READLINE_H
+
+/* Define to 1 if you have the <edit/readline/readline.h> header file. */
+#undef HAVE_EDIT_READLINE_READLINE_H
+
+/* Define to 1 if you have the <inttypes.h> header file. */
+#undef HAVE_INTTYPES_H
+
+/* Define to 1 if you have the <limits.h> header file. */
+#undef HAVE_LIMITS_H
+
+/* Define to 1 if you have the `memmove' function. */
+#undef HAVE_MEMMOVE
+
+/* Define to 1 if you have the <memory.h> header file. */
+#undef HAVE_MEMORY_H
+
+/* Define if you have POSIX threads libraries and header files. */
+#undef HAVE_PTHREAD
+
+/* Have PTHREAD_PRIO_INHERIT. */
+#undef HAVE_PTHREAD_PRIO_INHERIT
+
+/* Define to 1 if you have the <readline/history.h> header file. */
+#undef HAVE_READLINE_HISTORY_H
+
+/* Define to 1 if you have the <readline/readline.h> header file. */
+#undef HAVE_READLINE_READLINE_H
+
+/* Define to 1 if you have the <stdint.h> header file. */
+#undef HAVE_STDINT_H
+
+/* Define to 1 if you have the <stdlib.h> header file. */
+#undef HAVE_STDLIB_H
+
+/* Define to 1 if you have the `strerror' function. */
+#undef HAVE_STRERROR
+
+/* Define to 1 if you have the <strings.h> header file. */
+#undef HAVE_STRINGS_H
+
+/* Define to 1 if you have the <string.h> header file. */
+#undef HAVE_STRING_H
+
+/* Define to 1 if you have the <sys/stat.h> header file. */
+#undef HAVE_SYS_STAT_H
+
+/* Define to 1 if you have the <sys/types.h> header file. */
+#undef HAVE_SYS_TYPES_H
+
+/* Define to 1 if you have the <unistd.h> header file. */
+#undef HAVE_UNISTD_H
+
+/* Define to 1 if the compiler supports simple visibility declarations. */
+#undef HAVE_VISIBILITY
+
+/* Define to 1 if you have the <windows.h> header file. */
+#undef HAVE_WINDOWS_H
+
+/* Define to 1 if you have the <zlib.h> header file. */
+#undef HAVE_ZLIB_H
+
+/* PCRE2 uses recursive function calls to handle backtracking while matching.
+ This can sometimes be a problem on systems that have stacks of limited
+ size. Define HEAP_MATCH_RECURSE to any value to get a version that doesn't
+ use recursion in the match() function; instead it creates its own stack by
+ steam using memory from the heap. For more detail, see the comments and
+ other stuff just above the match() function. */
+#undef HEAP_MATCH_RECURSE
+
+/* The value of LINK_SIZE determines the number of bytes used to store links
+ as offsets within the compiled regex. The default is 2, which allows for
+ compiled patterns up to 64K long. This covers the vast majority of cases.
+ However, PCRE2 can also be compiled to use 3 or 4 bytes instead. This
+ allows for longer patterns in extreme cases. */
+#undef LINK_SIZE
+
+/* Define to the sub-directory where libtool stores uninstalled libraries. */
+#undef LT_OBJDIR
+
+/* The value of MATCH_LIMIT determines the default number of times the
+ internal match() function can be called during a single execution of
+ pcre2_match(). There is a runtime interface for setting a different limit.
+ The limit exists in order to catch runaway regular expressions that take
+ for ever to determine that they do not match. The default is set very large
+ so that it does not accidentally catch legitimate cases. */
+#undef MATCH_LIMIT
+
+/* The above limit applies to all calls of match(), whether or not they
+ increase the recursion depth. In some environments it is desirable to limit
+ the depth of recursive calls of match() more strictly, in order to restrict
+ the maximum amount of stack (or heap, if HEAP_MATCH_RECURSE is defined)
+ that is used. The value of MATCH_LIMIT_RECURSION applies only to recursive
+ calls of match(). To have any useful effect, it must be less than the value
+ of MATCH_LIMIT. The default is to use the same value as MATCH_LIMIT. There
+ is a runtime method for setting a different limit. */
+#undef MATCH_LIMIT_RECURSION
+
+/* This limit is parameterized just in case anybody ever wants to change it.
+ Care must be taken if it is increased, because it guards against integer
+ overflow caused by enormously large patterns. */
+#undef MAX_NAME_COUNT
+
+/* This limit is parameterized just in case anybody ever wants to change it.
+ Care must be taken if it is increased, because it guards against integer
+ overflow caused by enormously large patterns. */
+#undef MAX_NAME_SIZE
+
+/* The value of NEWLINE_DEFAULT determines the default newline character
+ sequence. PCRE2 client programs can override this by selecting other values
+ at run time. The valid values are 1 (CR), 2 (LF), 3 (CRLF), 4 (ANY), and 5
+ (ANYCRLF). */
+#undef NEWLINE_DEFAULT
+
+/* Name of package */
+#undef PACKAGE
+
+/* Define to the address where bug reports for this package should be sent. */
+#undef PACKAGE_BUGREPORT
+
+/* Define to the full name of this package. */
+#undef PACKAGE_NAME
+
+/* Define to the full name and version of this package. */
+#undef PACKAGE_STRING
+
+/* Define to the one symbol short name of this package. */
+#undef PACKAGE_TARNAME
+
+/* Define to the home page for this package. */
+#undef PACKAGE_URL
+
+/* Define to the version of this package. */
+#undef PACKAGE_VERSION
+
+/* The value of PARENS_NEST_LIMIT specifies the maximum depth of nested
+ parentheses (of any kind) in a pattern. This limits the amount of system
+ stack that is used while compiling a pattern. */
+#undef PARENS_NEST_LIMIT
+
+/* The value of PCRE2GREP_BUFSIZE determines the size of buffer used by
+ pcre2grep to hold parts of the file it is searching. This is also the
+ minimum value. The actual amount of memory used by pcre2grep is three times
+ this number, because it allows for the buffering of "before" and "after"
+ lines. */
+#undef PCRE2GREP_BUFSIZE
+
+/* to make a symbol visible */
+#undef PCRE2POSIX_EXP_DECL
+
+/* to make a symbol visible */
+#undef PCRE2POSIX_EXP_DEFN
+
+/* Define to any value to include debugging code. */
+#undef PCRE2_DEBUG
+
+/* to make a symbol visible */
+#undef PCRE2_EXP_DECL
+
+
+/* If you are compiling for a system other than a Unix-like system or
+ Win32, and it needs some magic to be inserted before the definition
+ of a function that is exported by the library, define this macro to
+ contain the relevant magic. If you do not define this macro, a suitable
+ __declspec value is used for Windows systems; in other environments
+ "extern" is used for a C compiler and "extern C" for a C++ compiler.
+ This macro apears at the start of every exported function that is part
+ of the external API. It does not appear on functions that are "external"
+ in the C sense, but which are internal to the library. */
+#undef PCRE2_EXP_DEFN
+
+/* Define to any value if linking statically (TODO: make nice with Libtool) */
+#undef PCRE2_STATIC
+
+/* Define to necessary symbol if this constant uses a non-standard name on
+ your system. */
+#undef PTHREAD_CREATE_JOINABLE
+
+/* Define to 1 if you have the ANSI C header files. */
+#undef STDC_HEADERS
+
+/* Define to any value to enable support for Just-In-Time compiling. */
+#undef SUPPORT_JIT
+
+/* Define to any value to allow pcre2grep to be linked with libbz2, so that it
+ is able to handle .bz2 files. */
+#undef SUPPORT_LIBBZ2
+
+/* Define to any value to allow pcre2test to be linked with libedit. */
+#undef SUPPORT_LIBEDIT
+
+/* Define to any value to allow pcre2test to be linked with libreadline. */
+#undef SUPPORT_LIBREADLINE
+
+/* Define to any value to allow pcre2grep to be linked with libz, so that it
+ is able to handle .gz files. */
+#undef SUPPORT_LIBZ
+
+/* Define to any value to enable JIT support in pcre2grep. */
+#undef SUPPORT_PCRE2GREP_JIT
+
+/* Define to any value to enable the 16 bit PCRE2 library. */
+#undef SUPPORT_PCRE2_16
+
+/* Define to any value to enable the 32 bit PCRE2 library. */
+#undef SUPPORT_PCRE2_32
+
+/* Define to any value to enable the 8 bit PCRE2 library. */
+#undef SUPPORT_PCRE2_8
+
+/* Define to any value to enable support for Unicode and UTF encoding. This
+ will work even in an EBCDIC environment, but it is incompatible with the
+ EBCDIC macro. That is, PCRE2 can support *either* EBCDIC code *or*
+ ASCII/Unicode, but not both at once. */
+#undef SUPPORT_UNICODE
+
+/* Define to any value for valgrind support to find invalid memory reads. */
+#undef SUPPORT_VALGRIND
+
+/* Version number of package */
+#undef VERSION
+
+/* Define to empty if `const' does not conform to ANSI C. */
+#undef const
+
+/* Define to the type of a signed integer type of width exactly 64 bits if
+ such a type exists and the standard includes do not define it. */
+#undef int64_t
+
+/* Define to `unsigned int' if <sys/types.h> does not define. */
+#undef size_t
