Revision: 208
http://www.exim.org/viewvc/pcre2?view=rev&revision=208
Author: ph10
Date: 2015-02-25 17:19:28 +0000 (Wed, 25 Feb 2015)
Log Message:
-----------
Add RunTest.bat for testing under Windows, with appropriate test files.
Modified Paths:
--------------
code/trunk/ChangeLog
code/trunk/Makefile.am
code/trunk/NON-AUTOTOOLS-BUILD
code/trunk/src/pcre2test.c
Added Paths:
-----------
code/trunk/RunTest.bat
code/trunk/testdata/wintestinput3
code/trunk/testdata/wintestoutput3
Modified: code/trunk/ChangeLog
===================================================================
--- code/trunk/ChangeLog 2015-02-24 14:21:28 UTC (rev 207)
+++ code/trunk/ChangeLog 2015-02-25 17:19:28 UTC (rev 208)
@@ -90,7 +90,11 @@
18. Fixed typo in pcre2_serialize.c (DECL instead of DEFN) that causes problems
only on Windows.
+19. Use binary input when reading back saved serialized patterns in pcre2test.
+20. Added RunTest.bat for running the tests under Windows.
+
+
Version 10.00 05-January-2015
-----------------------------
Modified: code/trunk/Makefile.am
===================================================================
--- code/trunk/Makefile.am 2015-02-24 14:21:28 UTC (rev 207)
+++ code/trunk/Makefile.am 2015-02-25 17:19:28 UTC (rev 208)
@@ -541,8 +541,7 @@
TESTS += RunTest
dist_noinst_SCRIPTS += RunTest
-# FIXME when somebody updates RunTest.bat
-#EXTRA_DIST += RunTest.bat
+EXTRA_DIST += RunTest.bat
## When the 8-bit library is configured, pcre2grep will have been built.
@@ -612,6 +611,8 @@
testdata/testoutput18 \
testdata/testoutput19 \
testdata/testoutputEBC \
+ testdata/wintestinput3 \
+ testdata/wintestoutput3 \
perltest.sh
# RunTest and RunGrepTest should clean up after themselves, but just in case
Modified: code/trunk/NON-AUTOTOOLS-BUILD
===================================================================
--- code/trunk/NON-AUTOTOOLS-BUILD 2015-02-24 14:21:28 UTC (rev 207)
+++ code/trunk/NON-AUTOTOOLS-BUILD 2015-02-25 17:19:28 UTC (rev 208)
@@ -20,10 +20,6 @@
GENERAL
-I (Philip Hazel) have no experience of Windows or VMS sytems and how their
-libraries work. The items in the PCRE2 distribution and Makefile that relate to
-anything other than Linux systems are untested by me.
-
The basic PCRE2 library consists entirely of code written in Standard C, and so
should compile successfully on any system that has a Standard C compiler and
library.
@@ -186,9 +182,12 @@
small for matching patterns that need much recursion. In particular, test 2 may
fail because of this. Normally, running out of stack causes a crash, but there
have been cases where the test program has just died silently. See your linker
-documentation for how to increase stack size if you experience problems. The
-Linux default of 8Mb is a reasonable choice for the stack, though even that can
-be too small for some pattern/subject combinations.
+documentation for how to increase stack size if you experience problems. If you
+are using CMake (see "BUILDING PCRE2 ON WINDOWS WITH CMAKE" below) and the gcc
+compiler, you can increase the stack size for pcre2test and pcre2grep by
+setting the CMAKE_EXE_LINKER_FLAGS variable to "-Wl,--stack,8388608" (for
+example). The Linux default of 8Mb is a reasonable choice for the stack, though
+even that can be too small for some pattern/subject combinations.
PCRE2 has a compile configuration option to disable the use of stack for
recursion so that heap is used instead. However, pattern matching is
@@ -330,23 +329,20 @@
12. If during configuration with cmake-gui you've elected to build the test
programs, you can execute them by building the test project. E.g., for
- MinGW: "make check"; for Visual Studio build the RUN_TESTS project. The
+ MinGW: "make test"; for Visual Studio build the RUN_TESTS project. The
most recent build configuration is targeted by the tests. A summary of
test results is presented. Complete test output is subsequently
available for review in Testing\Temporary under your build dir.
-TESTING WITH RUNTEST.BAT IS NOT YET TESTED/UPDATED
+TESTING WITH RUNTEST.BAT
-If configured with CMake, building the test project ("make check" or building
+If configured with CMake, building the test project ("make test" or building
ALL_TESTS in Visual Studio) creates (and runs) pcre2_test.bat (and depending
on your configuration options, possibly other test programs) in the build
-directory. Pcre_test.bat runs RunTest.Bat with correct source and exe paths.
+directory. The pcre2_test.bat script runs RunTest.bat with correct source and
+exe paths.
-INCOMPLETE: Nobody has yet provided a RunTest.Bat for PCRE2 and I have no means
-of doing so. These instructions are those for PCRE1, left here in the hope that
-one day they will be usable.
-
For manual testing with RunTest.bat, provided the build dir is a subdirectory
of the source directory: Open command shell window. Chdir to the location
of your pcre2test.exe and pcre2grep.exe programs. Call RunTest.bat with
@@ -392,4 +388,4 @@
course.
=============================
-Last Updated: 19 January 2015
+Last Updated: 25 February 2015
Added: code/trunk/RunTest.bat
===================================================================
--- code/trunk/RunTest.bat (rev 0)
+++ code/trunk/RunTest.bat 2015-02-25 17:19:28 UTC (rev 208)
@@ -0,0 +1,463 @@
+@echo off
+@rem
+@rem MS Windows batch file to run pcre2test on testfiles with the correct
+@rem options. This file must use CRLF linebreaks to function properly,
+@rem and requires both pcre2test and pcre2grep.
+@rem
+@rem ------------------------ HISTORY ----------------------------------
+@rem This file was originally contributed to PCRE1 by Ralf Junker, and touched
+@rem up by Daniel Richard G. Tests 10-12 added by Philip H.
+@rem Philip H also changed test 3 to use "wintest" files.
+@rem
+@rem Updated by Tom Fortmann to support explicit test numbers on the command
+@rem line. Added argument validation and added error reporting.
+@rem
+@rem Sheri Pierce added logic to skip feature dependent tests
+@rem tests 4 5 9 15 and 18 require utf support
+@rem tests 6 7 10 16 and 19 require ucp support
+@rem 11 requires ucp and link size 2
+@rem 12 requires presence of jit support
+@rem 13 requires absence of jit support
+@rem Sheri P also added override tests for study and jit testing
+@rem Zoltan Herczeg added libpcre16 support
+@rem Zoltan Herczeg added libpcre32 support
+@rem -------------------------------------------------------------------
+@rem
+@rem The file was converted for PCRE2 by PH, February 2015.
+
+
+setlocal enabledelayedexpansion
+if [%srcdir%]==[] (
+if exist testdata\ set srcdir=.)
+if [%srcdir%]==[] (
+if exist ..\testdata\ set srcdir=..)
+if [%srcdir%]==[] (
+if exist ..\..\testdata\ set srcdir=..\..)
+if NOT exist %srcdir%\testdata\ (
+Error: echo distribution testdata folder not found!
+call :conferror
+exit /b 1
+goto :eof
+)
+
+if [%pcre2test%]==[] set pcre2test=.\pcre2test.exe
+
+echo source dir is %srcdir%
+echo pcre2test=%pcre2test%
+
+if NOT exist %pcre2test% (
+echo Error: %pcre2test% not found!
+echo.
+call :conferror
+exit /b 1
+)
+
+%pcre2test% -C linksize >NUL
+set link_size=%ERRORLEVEL%
+%pcre2test% -C pcre2-8 >NUL
+set support8=%ERRORLEVEL%
+%pcre2test% -C pcre2-16 >NUL
+set support16=%ERRORLEVEL%
+%pcre2test% -C pcre2-32 >NUL
+set support32=%ERRORLEVEL%
+%pcre2test% -C unicode >NUL
+set unicode=%ERRORLEVEL%
+%pcre2test% -C jit >NUL
+set jit=%ERRORLEVEL%
+
+if %support8% EQU 1 (
+if not exist testout8 md testout8
+if not exist testoutjit8 md testoutjit8
+)
+
+if %support16% EQU 1 (
+if not exist testout16 md testout16
+if not exist testoutjit16 md testoutjit16
+)
+
+if %support16% EQU 1 (
+if not exist testout32 md testout32
+if not exist testoutjit32 md testoutjit32
+)
+
+set do1=no
+set do2=no
+set do3=no
+set do4=no
+set do5=no
+set do6=no
+set do7=no
+set do8=no
+set do9=no
+set do10=no
+set do11=no
+set do12=no
+set do13=no
+set do14=no
+set do15=no
+set do16=no
+set do17=no
+set do18=no
+set do19=no
+set all=yes
+
+for %%a in (%*) do (
+ set valid=no
+ for %%v in (1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19) do if %%v == %%a set valid=yes
+ if "!valid!" == "yes" (
+ set do%%a=yes
+ set all=no
+) else (
+ echo Invalid test number - %%a!
+ echo Usage %0 [ test_number ] ...
+ echo Where test_number is one or more optional test numbers 1 through 19, default is all tests.
+ exit /b 1
+)
+)
+set failed="no"
+
+if "%all%" == "yes" (
+ set do1=yes
+ set do2=yes
+ set do3=yes
+ set do4=yes
+ set do5=yes
+ set do6=yes
+ set do7=yes
+ set do8=yes
+ set do9=yes
+ set do10=yes
+ set do11=yes
+ set do12=yes
+ set do13=yes
+ set do14=yes
+ set do15=yes
+ set do16=yes
+ set do17=yes
+ set do18=yes
+ set do19=yes
+)
+
+@echo RunTest.bat's pcre2test output is written to newly created subfolders
+@echo named testout{8,16,32} and testoutjit{8,16,32}.
+@echo.
+
+set mode=
+set bits=8
+
+:nextMode
+if "%mode%" == "" (
+ if %support8% EQU 0 goto modeSkip
+ echo.
+ echo ---- Testing 8-bit library ----
+ echo.
+)
+if "%mode%" == "-16" (
+ if %support16% EQU 0 goto modeSkip
+ echo.
+ echo ---- Testing 16-bit library ----
+ echo.
+)
+if "%mode%" == "-32" (
+ if %support32% EQU 0 goto modeSkip
+ echo.
+ echo ---- Testing 32-bit library ----
+ echo.
+)
+if "%do1%" == "yes" call :do1
+if "%do2%" == "yes" call :do2
+if "%do3%" == "yes" call :do3
+if "%do4%" == "yes" call :do4
+if "%do5%" == "yes" call :do5
+if "%do6%" == "yes" call :do6
+if "%do7%" == "yes" call :do7
+if "%do8%" == "yes" call :do8
+if "%do9%" == "yes" call :do9
+if "%do10%" == "yes" call :do10
+if "%do11%" == "yes" call :do11
+if "%do12%" == "yes" call :do12
+if "%do13%" == "yes" call :do13
+if "%do14%" == "yes" call :do14
+if "%do15%" == "yes" call :do15
+if "%do16%" == "yes" call :do16
+if "%do17%" == "yes" call :do17
+if "%do18%" == "yes" call :do18
+if "%do19%" == "yes" call :do19
+:modeSkip
+if "%mode%" == "" (
+ set mode=-16
+ set bits=16
+ goto nextMode
+)
+if "%mode%" == "-16" (
+ set mode=-32
+ set bits=32
+ goto nextMode
+)
+
+@rem If mode is -32, testing is finished
+if %failed% == "yes" (
+echo In above output, one or more of the various tests failed!
+exit /b 1
+)
+echo All OK
+goto :eof
+
+:runsub
+@rem Function to execute pcre2test and compare the output
+@rem Arguments are as follows:
+@rem
+@rem 1 = test number
+@rem 2 = outputdir
+@rem 3 = test name use double quotes
+@rem 4 - 9 = pcre2test options
+
+if [%1] == [] (
+ echo Missing test number argument!
+ exit /b 1
+)
+
+if [%2] == [] (
+ echo Missing outputdir!
+ exit /b 1
+)
+
+if [%3] == [] (
+ echo Missing test name argument!
+ exit /b 1
+)
+
+set testinput=testinput%1
+set testoutput=testoutput%1
+if exist %srcdir%\testdata\win%testinput% (
+ set testinput=wintestinput%1
+ set testoutput=wintestoutput%1
+)
+
+echo Test %1: %3
+%pcre2test% %mode% %4 %5 %6 %7 %8 %9 %srcdir%\testdata\%testinput% >%2%bits%\%testoutput%
+if errorlevel 1 (
+ echo. failed executing command-line:
+ echo. %pcre2test% %mode% %4 %5 %6 %7 %8 %9 %srcdir%\testdata\%testinput% ^>%2%bits%\%testoutput%
+ set failed="yes"
+ goto :eof
+)
+
+set type=
+if [%1]==[8] (
+ set type=-%bits%
+)
+if [%1]==[11] (
+ set type=-%bits%
+)
+if [%1]==[12] (
+ set type=-%bits%
+)
+
+fc /n %srcdir%\testdata\%testoutput%%type% %2%bits%\%testoutput% >NUL
+
+if errorlevel 1 (
+ echo. failed comparison: fc /n %srcdir%\testdata\%testoutput% %2%bits%\%testoutput%
+ if [%1]==[2] (
+ echo.
+ echo ** Test 2 requires a lot of stack. PCRE2 can be configured to
+ echo ** use heap for recursion. Otherwise, to pass Test 2
+ echo ** you generally need to allocate 8 mb stack to PCRE2.
+ echo ** See the 'pcre2stack' page for a discussion of PCRE2's
+ echo ** stack usage.
+ echo.
+)
+ if [%1]==[3] (
+ echo.
+ echo ** Test 3 failure usually means french locale is not
+ echo ** available on the system, rather than a bug or problem with PCRE2.
+ echo.
+ goto :eof
+)
+
+ set failed="yes"
+ goto :eof
+)
+
+echo. Passed.
+goto :eof
+
+:do1
+call :runsub 1 testout "Main non-UTF, non-UCP functionality (Compatible with Perl >= 5.10)" -q
+if %jit% EQU 1 call :runsub 1 testoutjit "Test with JIT Override" -q -jit
+goto :eof
+
+:do2
+ call :runsub 2 testout "API, errors, internals, and non-Perl stuff" -q
+ if %jit% EQU 1 call :runsub 2 testoutjit "Test with JIT Override" -q -jit
+goto :eof
+
+:do3
+ call :runsub 3 testout "Locale-specific features" -q
+ if %jit% EQU 1 call :runsub 3 testoutjit "Test with JIT Override" -q -jit
+goto :eof
+
+:do4
+if %unicode% EQU 0 (
+ echo Test 4 Skipped due to absence of Unicode support.
+ goto :eof
+)
+ call :runsub 4 testout "UTF-%bits% and Unicode property support - (Compatible with Perl >= 5.10)" -q
+ if %jit% EQU 1 call :runsub 4 testoutjit "Test with JIT Override" -q -jit
+goto :eof
+
+:do5
+if %unicode% EQU 0 (
+ echo Test 5 Skipped due to absence of Unicode support.
+ goto :eof
+)
+ call :runsub 5 testout "API, internals, and non-Perl stuff for UTF-%bits% and UCP" -q
+ if %jit% EQU 1 call :runsub 5 testoutjit "Test with JIT Override" -q -jit
+goto :eof
+
+:do6
+ call :runsub 6 testout "DFA matching main non-UTF, non-UCP functionality" -q -dfa
+goto :eof
+
+:do7
+if %unicode% EQU 0 (
+ echo Test 7 Skipped due to absence of Unicode support.
+ goto :eof
+)
+ call :runsub 7 testout "DFA matching with UTF-%bits% and Unicode property support" -q -dfa
+ goto :eof
+
+:do8
+if NOT %link_size% EQU 2 (
+ echo Test 8 Skipped because link size is not 2.
+ goto :eof
+)
+if %unicode% EQU 0 (
+ echo Test 8 Skipped due to absence of Unicode support.
+ goto :eof
+)
+ call :runsub 8 testout "Internal offsets and code size tests" -q
+goto :eof
+
+:do9
+if NOT %bits% EQU 8 (
+ echo Test 9 Skipped when running 16/32-bit tests.
+ goto :eof
+)
+ call :runsub 9 testout "Specials for the basic 8-bit library" -q
+ if %jit% EQU 1 call :runsub 9 testoutjit "Test with JIT Override" -q -jit
+goto :eof
+
+:do10
+if NOT %bits% EQU 8 (
+ echo Test 10 Skipped when running 16/32-bit tests.
+ goto :eof
+)
+if %unicode% EQU 0 (
+ echo Test 10 Skipped due to absence of Unicode support.
+ goto :eof
+)
+ call :runsub 10 testout "Specials for the 8-bit library with Unicode support" -q
+ if %jit% EQU 1 call :runsub 10 testoutjit "Test with JIT Override" -q -jit
+goto :eof
+
+:do11
+if %bits% EQU 8 (
+ echo Test 11 Skipped when running 8-bit tests.
+ goto :eof
+)
+ call :runsub 11 testout "Specials for the basic 16/32-bit library" -q
+ if %jit% EQU 1 call :runsub 11 testoutjit "Test with JIT Override" -q -jit
+goto :eof
+
+:do12
+if %bits% EQU 8 (
+ echo Test 12 Skipped when running 8-bit tests.
+ goto :eof
+)
+if %unicode% EQU 0 (
+ echo Test 12 Skipped due to absence of Unicode support.
+ goto :eof
+)
+ call :runsub 12 testout "Specials for the 16/32-bit library with Unicode support" -q
+ if %jit% EQU 1 call :runsub 12 testoutjit "Test with JIT Override" -q -jit
+goto :eof
+
+:do13
+if %bits% EQU 8 (
+ echo Test 13 Skipped when running 8-bit tests.
+ goto :eof
+)
+ call :runsub 13 testout "DFA specials for the basic 16/32-bit library" -q -dfa
+goto :eof
+
+:do14
+call :runsub 14 testout "Non-JIT limits and other non_JIT tests" -q
+goto :eof
+
+:do15
+if %jit% EQU 1 (
+ echo Test 15 Skipped due to presence of JIT support.
+ goto :eof
+)
+ call :runsub 15 testout "JIT-specific features when JIT is not available" -q
+goto :eof
+
+:do16
+if %jit% EQU 0 (
+ echo Test 16 Skipped due to absence of JIT support.
+ goto :eof
+)
+ call :runsub 16 testout "JIT-specific features when JIT is available" -q
+goto :eof
+
+:do17
+if %bits% EQU 16 (
+ echo Test 17 Skipped when running 16-bit tests.
+ goto :eof
+)
+if %bits% EQU 32 (
+ echo Test 17 Skipped when running 32-bit tests.
+ goto :eof
+)
+ call :runsub 17 testout "POSIX interface, excluding UTF-8 and UCP" -q
+goto :eof
+
+:do18
+if %bits% EQU 16 (
+ echo Test 18 Skipped when running 16-bit tests.
+ goto :eof
+)
+if %bits% EQU 32 (
+ echo Test 18 Skipped when running 32-bit tests.
+ goto :eof
+)
+ call :runsub 1 testout "POSIX interface with UTF-8 and UCP" -q
+goto :eof
+
+:do19
+call :runsub 1 testout "Serialization tests" -q
+goto :eof
+
+:conferror
+@echo.
+@echo Either your build is incomplete or you have a configuration error.
+@echo.
+@echo If configured with cmake and executed via "make test" or the MSVC "RUN_TESTS"
+@echo project, pcre2_test.bat defines variables and automatically calls RunTest.bat.
+@echo For manual testing of all available features, after configuring with cmake
+@echo and building, you can run the built pcre2_test.bat. For best results with
+@echo cmake builds and tests avoid directories with full path names that include
+@echo spaces for source or build.
+@echo.
+@echo Otherwise, if the build dir is in a subdir of the source dir, testdata needed
+@echo for input and verification should be found automatically when (from the
+@echo location of the the built exes) you call RunTest.bat. By default RunTest.bat
+@echo runs all tests compatible with the linked pcre2 library but it can be given
+@echo a test number as an argument.
+@echo.
+@echo If the build dir is not under the source dir you can either copy your exes
+@echo to the source folder or copy RunTest.bat and the testdata folder to the
+@echo location of your built exes and then run RunTest.bat.
+@echo.
+goto :eof
Modified: code/trunk/src/pcre2test.c
===================================================================
--- code/trunk/src/pcre2test.c 2015-02-24 14:21:28 UTC (rev 207)
+++ code/trunk/src/pcre2test.c 2015-02-25 17:19:28 UTC (rev 208)
@@ -100,15 +100,18 @@
input and output without "b"; then I was told that "b" was needed in some
environments, so it was added for release 5.0 to both the input and output. (It
makes no difference on Unix-like systems.) Later I was told that it is wrong
-for the input on Windows. I've now abstracted the modes into two macros that
-are set here, to make it easier to fiddle with them, and removed "b" from the
-input mode under Windows. */
+for the input on Windows. I've now abstracted the modes into macros that are
+set here, to make it easier to fiddle with them, and removed "b" from the input
+mode under Windows. The BINARY versions are used when saving/restoring compiled
+patterns. */
#if defined(_WIN32) || defined(WIN32)
#include <io.h> /* For _setmode() */
#include <fcntl.h> /* For _O_BINARY */
-#define INPUT_MODE "r"
-#define OUTPUT_MODE "wb"
+#define INPUT_MODE "r"
+#define OUTPUT_MODE "wb"
+#define BINARY_INPUT_MODE "rb"
+#define BINARY_OUTPUT_MODE "wb"
#ifndef isatty
#define isatty _isatty /* This is what Windows calls them, I'm told, */
@@ -132,9 +135,13 @@
#if defined NATIVE_ZOS /* z/OS uses non-binary I/O */
#define INPUT_MODE "r"
#define OUTPUT_MODE "w"
+#define BINARY_INPUT_MODE "rb"
+#define BINARY_OUTPUT_MODE "wb"
#else
-#define INPUT_MODE "rb"
-#define OUTPUT_MODE "wb"
+#define INPUT_MODE "rb"
+#define OUTPUT_MODE "wb"
+#define BINARY_INPUT_MODE "rb"
+#define BINARY_OUTPUT_MODE "wb"
#endif
#endif
@@ -3964,7 +3971,7 @@
return PR_OK;
}
- rc = open_file(argptr+1, OUTPUT_MODE, &f);
+ rc = open_file(argptr+1, BINARY_OUTPUT_MODE, &f);
if (rc != PR_OK) return rc;
PCRE2_SERIALIZE_ENCODE(rc, patstack, patstacknext, &serial, &serial_size,
@@ -4001,7 +4008,7 @@
/* Load a set of compiled patterns from a file onto the stack */
case CMD_LOAD:
- rc = open_file(argptr+1, INPUT_MODE, &f);
+ rc = open_file(argptr+1, BINARY_INPUT_MODE, &f);
if (rc != PR_OK) return rc;
serial_size = 0;
Added: code/trunk/testdata/wintestinput3
===================================================================
--- code/trunk/testdata/wintestinput3 (rev 0)
+++ code/trunk/testdata/wintestinput3 2015-02-25 17:19:28 UTC (rev 208)
@@ -0,0 +1,104 @@
+# This set of tests checks local-specific features, using the "fr_FR" locale.
+# It is not Perl-compatible. When run via RunTest, the locale is edited to
+# be whichever of "fr_FR", "french", or "fr" is found to exist. There is
+# different version of this file called wintestinput3 for use on Windows,
+# where the locale is called "french" and the tests are run using
+# RunTest.bat.
+
+#forbid_utf
+
+/^[\w]+/
+ *** Failers
+ \xC9cole
+
+/^[\w]+/locale=french
+ \xC9cole
+
+/^[\w]+/
+ *** Failers
+ \xC9cole
+
+/^[\W]+/
+ \xC9cole
+
+/^[\W]+/locale=french
+ *** Failers
+ \xC9cole
+
+/[\b]/
+ \b
+ *** Failers
+ a
+
+/[\b]/locale=french
+ \b
+ *** Failers
+ a
+
+/^\w+/
+ *** Failers
+ \xC9cole
+
+/^\w+/locale=french
+ \xC9cole
+
+/(.+)\b(.+)/
+ \xC9cole
+
+/(.+)\b(.+)/locale=french
+ *** Failers
+ \xC9cole
+
+/\xC9cole/i
+ \xC9cole
+ *** Failers
+ \xE9cole
+
+/\xC9cole/i,locale=french
+ \xC9cole
+ \xE9cole
+
+/\w/I
+
+/\w/I,locale=french
+
+# All remaining tests are in the french locale, so set the default.
+
+#pattern locale=french
+
+/^[\xc8-\xc9]/i
+ \xC9cole
+ \xE9cole
+
+/^[\xc8-\xc9]/
+ \xC9cole
+ *** Failers
+ \xE9cole
+
+/\W+/
+ >>>\xaa<<<
+ >>>\xba<<<
+
+/[\W]+/
+ >>>\xaa<<<
+ >>>\xba<<<
+
+/[^[:alpha:]]+/
+ >>>\xaa<<<
+ >>>\xba<<<
+
+/\w+/
+ >>>\xaa<<<
+ >>>\xba<<<
+
+/[\w]+/
+ >>>\xaa<<<
+ >>>\xba<<<
+
+/[[:alpha:]]+/
+ >>>\xaa<<<
+ >>>\xba<<<
+
+/[[:alpha:]][[:lower:]][[:upper:]]/IB
+
+# End of testinput3
Property changes on: code/trunk/testdata/wintestinput3
___________________________________________________________________
Name: svn:executable
+ *
Added: code/trunk/testdata/wintestoutput3
===================================================================
--- code/trunk/testdata/wintestoutput3 (rev 0)
+++ code/trunk/testdata/wintestoutput3 2015-02-25 17:19:28 UTC (rev 208)
@@ -0,0 +1,175 @@
+# This set of tests checks local-specific features, using the "fr_FR" locale.
+# It is not Perl-compatible. When run via RunTest, the locale is edited to
+# be whichever of "fr_FR", "french", or "fr" is found to exist. There is
+# different version of this file called wintestinput3 for use on Windows,
+# where the locale is called "french" and the tests are run using
+# RunTest.bat.
+
+#forbid_utf
+
+/^[\w]+/
+ *** Failers
+No match
+ \xC9cole
+No match
+
+/^[\w]+/locale=french
+ \xC9cole
+ 0: \xC9cole
+
+/^[\w]+/
+ *** Failers
+No match
+ \xC9cole
+No match
+
+/^[\W]+/
+ \xC9cole
+ 0: \xc9
+
+/^[\W]+/locale=french
+ *** Failers
+ 0: ***
+ \xC9cole
+No match
+
+/[\b]/
+ \b
+ 0: \x08
+ *** Failers
+No match
+ a
+No match
+
+/[\b]/locale=french
+ \b
+ 0: \x08
+ *** Failers
+No match
+ a
+No match
+
+/^\w+/
+ *** Failers
+No match
+ \xC9cole
+No match
+
+/^\w+/locale=french
+ \xC9cole
+ 0: \xC9cole
+
+/(.+)\b(.+)/
+ \xC9cole
+ 0: \xc9cole
+ 1: \xc9
+ 2: cole
+
+/(.+)\b(.+)/locale=french
+ *** Failers
+ 0: *** Failers
+ 1: ***
+ 2: Failers
+ \xC9cole
+No match
+
+/\xC9cole/i
+ \xC9cole
+ 0: \xc9cole
+ *** Failers
+No match
+ \xE9cole
+No match
+
+/\xC9cole/i,locale=french
+ \xC9cole
+ 0: \xC9cole
+ \xE9cole
+ 0: \xE9cole
+
+/\w/I
+Capturing subpattern count = 0
+Starting code units: 0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P
+ Q R S T U V W X Y Z _ a b c d e f g h i j k l m n o p q r s t u v w x y z
+Subject length lower bound = 1
+
+/\w/I,locale=french
+Capturing subpattern count = 0
+Starting code units: 0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P
+ Q R S T U V W X Y Z _ a b c d e f g h i j k l m n o p q r s t u v w x y z
+ \x83 \x8A \x8C \x8E \x9A \x9C \x9E \x9F \xAA \xB2 \xB3 \xB5 \xB9 \xBA \xC0 \xC1 \xC2 \xC3 \xC4 \xC5 \xC6 \xC7 \xC8 \xC9 \xCA \xCB \xCC \xCD \xCE \xCF \xD0 \xD1 \xD2 \xD3 \xD4 \xD5 \xD6
+ \xD8 \xD9 \xDA \xDB \xDC \xDD \xDE \xDF \xE0 \xE1 \xE2 \xE3 \xE4 \xE5 \xE6 \xE7 \xE8 \xE9 \xEA \xEB \xEC \xED \xEE \xEF \xF0 \xF1 \xF2 \xF3 \xF4 \xF5 \xF6 \xF8 \xF9 \xFA \xFB \xFC \xFD
+ \xFE \xFF
+Subject length lower bound = 1
+
+# All remaining tests are in the french locale, so set the default.
+
+#pattern locale=french
+
+/^[\xc8-\xc9]/i
+ \xC9cole
+ 0: \xC9
+ \xE9cole
+ 0: \xE9
+
+/^[\xc8-\xc9]/
+ \xC9cole
+ 0: \xC9
+ *** Failers
+No match
+ \xE9cole
+No match
+
+/\W+/
+ >>>\xaa<<<
+ 0: >>>
+ >>>\xba<<<
+ 0: >>>
+
+/[\W]+/
+ >>>\xaa<<<
+ 0: >>>
+ >>>\xba<<<
+ 0: >>>
+
+/[^[:alpha:]]+/
+ >>>\xaa<<<
+ 0: >>>
+ >>>\xba<<<
+ 0: >>>
+
+/\w+/
+ >>>\xaa<<<
+ 0: \xAA
+ >>>\xba<<<
+ 0: \xBA
+
+/[\w]+/
+ >>>\xaa<<<
+ 0: \xAA
+ >>>\xba<<<
+ 0: \xBA
+
+/[[:alpha:]]+/
+ >>>\xaa<<<
+ 0: \xAA
+ >>>\xba<<<
+ 0: \xBA
+
+/[[:alpha:]][[:lower:]][[:upper:]]/IB
+------------------------------------------------------------------
+ Bra
+ [A-Za-z\x83\x8a\x8c\x8e\x9a\x9c\x9e\x9f\xaa\xb2\xb3\xb5\xb9\xba\xc0-\xd6\xd8-\xf6\xf8-\xff]
+ [a-z\x83\x9a\x9c\x9e\xaa\xb5\xba\xdf-\xf6\xf8-\xff]
+ [A-Z\x8a\x8c\x8e\x9f\xc0-\xd6\xd8-\xde]
+ Ket
+ End
+------------------------------------------------------------------
+Capturing subpattern count = 0
+Starting code units: A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
+ a b c d e f g h i j k l m n o p q r s t u v w x y z \x83 \x8A \x8C \x8E \x9A \x9C \x9E \x9F \xAA \xB2 \xB3
+ \xB5 \xB9 \xBA \xC0 \xC1 \xC2 \xC3 \xC4 \xC5 \xC6 \xC7 \xC8 \xC9 \xCA \xCB \xCC \xCD \xCE \xCF \xD0 \xD1 \xD2 \xD3 \xD4 \xD5 \xD6 \xD8 \xD9 \xDA \xDB \xDC \xDD \xDE \xDF \xE0 \xE1 \xE2
+ \xE3 \xE4 \xE5 \xE6 \xE7 \xE8 \xE9 \xEA \xEB \xEC \xED \xEE \xEF \xF0 \xF1 \xF2 \xF3 \xF4 \xF5 \xF6 \xF8 \xF9 \xFA \xFB \xFC \xFD \xFE \xFF
+Subject length lower bound = 3
+
+# End of testinput3
Property changes on: code/trunk/testdata/wintestoutput3
___________________________________________________________________
Name: svn:executable
+ *
