Revision: 548
http://vcs.pcre.org/viewvc?view=rev&revision=548
Author: ph10
Date: 2010-06-25 15:42:00 +0100 (Fri, 25 Jun 2010)
Log Message:
-----------
Final updates for 8.10 release.
Modified Paths:
--------------
code/trunk/ChangeLog
code/trunk/NEWS
code/trunk/configure.ac
code/trunk/doc/html/pcreapi.html
code/trunk/doc/pcre.txt
code/trunk/doc/pcreapi.3
Modified: code/trunk/ChangeLog
===================================================================
--- code/trunk/ChangeLog 2010-06-21 14:06:54 UTC (rev 547)
+++ code/trunk/ChangeLog 2010-06-25 14:42:00 UTC (rev 548)
@@ -1,7 +1,7 @@
ChangeLog for PCRE
------------------
-Version 8.10 16-Jun-2010
+Version 8.10 25-Jun-2010
------------------------
1. Added support for (*MARK:ARG) and for ARG additions to PRUNE, SKIP, and
Modified: code/trunk/NEWS
===================================================================
--- code/trunk/NEWS 2010-06-21 14:06:54 UTC (rev 547)
+++ code/trunk/NEWS 2010-06-25 14:42:00 UTC (rev 548)
@@ -1,7 +1,7 @@
News about PCRE releases
------------------------
-Release 8.10 16-Jun-2010
+Release 8.10 25-Jun-2010
------------------------
There are two major additions: support for (*MARK) and friends, and the option
Modified: code/trunk/configure.ac
===================================================================
--- code/trunk/configure.ac 2010-06-21 14:06:54 UTC (rev 547)
+++ code/trunk/configure.ac 2010-06-25 14:42:00 UTC (rev 548)
@@ -11,7 +11,7 @@
m4_define(pcre_major, [8])
m4_define(pcre_minor, [10])
m4_define(pcre_prerelease, [])
-m4_define(pcre_date, [2010-06-20])
+m4_define(pcre_date, [2010-06-25])
# Libtool shared library interface versions (current:revision:age)
m4_define(libpcre_version, [0:1:0])
Modified: code/trunk/doc/html/pcreapi.html
===================================================================
--- code/trunk/doc/html/pcreapi.html 2010-06-21 14:06:54 UTC (rev 547)
+++ code/trunk/doc/html/pcreapi.html 2010-06-25 14:42:00 UTC (rev 548)
@@ -762,7 +762,8 @@
50 [this code is not in use]
51 octal value is greater than \377 (not in UTF-8 mode)
52 internal error: overran compiling workspace
- 53 internal error: previously-checked referenced subpattern not found
+ 53 internal error: previously-checked referenced subpattern
+ not found
54 DEFINE group contains more than one branch
55 repeating a DEFINE group is not allowed
56 inconsistent NEWLINE options
@@ -775,7 +776,8 @@
62 subpattern name expected
63 digit expected after (?+
64 ] is an invalid data character in JavaScript compatibility mode
- 65 different names for subpatterns of the same number are not allowed
+ 65 different names for subpatterns of the same number are
+ not allowed
66 (*MARK) must have an argument
67 this version of PCRE is not compiled with PCRE_UCP support
</pre>
@@ -844,6 +846,14 @@
single fixed starting character. A bitmap of possible starting bytes is
created. This speeds up finding a position in the subject at which to start
matching.
+</P>
+<P>
+The two optimizations just described can be disabled by setting the
+PCRE_NO_START_OPTIMIZE option when calling <b>pcre_exec()</b> or
+<b>pcre_dfa_exec()</b>. You might want to do this if your pattern contains
+callouts, or make use of (*MARK), and you make use of these in cases where
+matching fails. See the discussion of PCRE_NO_START_OPTIMIZE
+<a href="#execoptions">below.</a>
<a name="localesupport"></a></P>
<br><a name="SEC10" href="#TOC1">LOCALE SUPPORT</a><br>
<P>
@@ -1443,13 +1453,43 @@
for that character, and fails immediately if it cannot find it, without
actually running the main matching function. This means that a special item
such as (*COMMIT) at the start of a pattern is not considered until after a
-suitable starting point for the match has been found. When callouts are in use,
-these "start-up" optimizations can cause them to be skipped if the pattern is
-never actually used. The PCRE_NO_START_OPTIMIZE option disables the start-up
-optimizations, causing performance to suffer, but ensuring that the callouts do
-occur, and that items such as (*COMMIT) are considered at every possible
-starting position in the subject string.
+suitable starting point for the match has been found. When callouts or (*MARK)
+items are in use, these "start-up" optimizations can cause them to be skipped
+if the pattern is never actually used. The start-up optimizations are in effect
+a pre-scan of the subject that takes place before the pattern is run.
+</P>
+<P>
+The PCRE_NO_START_OPTIMIZE option disables the start-up optimizations, possibly
+causing performance to suffer, but ensuring that in cases where the result is
+"no match", the callouts do occur, and that items such as (*COMMIT) and (*MARK)
+are considered at every possible starting position in the subject string.
+Setting PCRE_NO_START_OPTIMIZE can change the outcome of a matching operation.
+Consider the pattern
<pre>
+ (*COMMIT)ABC
+</pre>
+When this is compiled, PCRE records the fact that a match must start with the
+character "A". Suppose the subject string is "DEFABC". The start-up
+optimization scans along the subject, finds "A" and runs the first match
+attempt from there. The (*COMMIT) item means that the pattern must match the
+current starting position, which in this case, it does. However, if the same
+match is run with PCRE_NO_START_OPTIMIZE set, the initial scan along the
+subject string does not happen. The first match attempt is run starting from
+"D" and when this fails, (*COMMIT) prevents any further matches being tried, so
+the overall result is "no match". If the pattern is studied, more start-up
+optimizations may be used. For example, a minimum length for the subject may be
+recorded. Consider the pattern
+<pre>
+ (*MARK:A)(X|Y)
+</pre>
+The minimum length for a match is one character. If the subject is "ABC", there
+will be attempts to match "ABC", "BC", "C", and then finally an empty string.
+If the pattern is studied, the final attempt does not take place, because PCRE
+knows that the subject is too short, and so the (*MARK) is never encountered.
+In this case, studying the pattern does not affect the overall match result,
+which is still "no match", but it does affect the auxiliary information that is
+returned.
+<pre>
PCRE_NO_UTF8_CHECK
</pre>
When PCRE_UTF8 is set at compile time, the validity of the subject as a UTF-8
@@ -2121,7 +2161,7 @@
</P>
<br><a name="SEC22" href="#TOC1">REVISION</a><br>
<P>
-Last updated: 15 June 2010
+Last updated: 21 June 2010
<br>
Copyright © 1997-2010 University of Cambridge.
<br>
Modified: code/trunk/doc/pcre.txt
===================================================================
--- code/trunk/doc/pcre.txt 2010-06-21 14:06:54 UTC (rev 547)
+++ code/trunk/doc/pcre.txt 2010-06-25 14:42:00 UTC (rev 548)
@@ -1482,8 +1482,8 @@
50 [this code is not in use]
51 octal value is greater than \377 (not in UTF-8 mode)
52 internal error: overran compiling workspace
- 53 internal error: previously-checked referenced subpattern not
- found
+ 53 internal error: previously-checked referenced subpattern
+ not found
54 DEFINE group contains more than one branch
55 repeating a DEFINE group is not allowed
56 inconsistent NEWLINE options
@@ -1496,8 +1496,8 @@
62 subpattern name expected
63 digit expected after (?+
64 ] is an invalid data character in JavaScript compatibility mode
- 65 different names for subpatterns of the same number are not
- allowed
+ 65 different names for subpatterns of the same number are
+ not allowed
66 (*MARK) must have an argument
67 this version of PCRE is not compiled with PCRE_UCP support
@@ -1559,61 +1559,68 @@
bytes is created. This speeds up finding a position in the subject at
which to start matching.
+ The two optimizations just described can be disabled by setting the
+ PCRE_NO_START_OPTIMIZE option when calling pcre_exec() or
+ pcre_dfa_exec(). You might want to do this if your pattern contains
+ callouts, or make use of (*MARK), and you make use of these in cases
+ where matching fails. See the discussion of PCRE_NO_START_OPTIMIZE
+ below.
+
LOCALE SUPPORT
- PCRE handles caseless matching, and determines whether characters are
- letters, digits, or whatever, by reference to a set of tables, indexed
- by character value. When running in UTF-8 mode, this applies only to
- characters with codes less than 128. By default, higher-valued codes
+ PCRE handles caseless matching, and determines whether characters are
+ letters, digits, or whatever, by reference to a set of tables, indexed
+ by character value. When running in UTF-8 mode, this applies only to
+ characters with codes less than 128. By default, higher-valued codes
never match escapes such as \w or \d, but they can be tested with \p if
- PCRE is built with Unicode character property support. Alternatively,
- the PCRE_UCP option can be set at compile time; this causes \w and
+ PCRE is built with Unicode character property support. Alternatively,
+ the PCRE_UCP option can be set at compile time; this causes \w and
friends to use Unicode property support instead of built-in tables. The
use of locales with Unicode is discouraged. If you are handling charac-
- ters with codes greater than 128, you should either use UTF-8 and Uni-
+ ters with codes greater than 128, you should either use UTF-8 and Uni-
code, or use locales, but not try to mix the two.
- PCRE contains an internal set of tables that are used when the final
- argument of pcre_compile() is NULL. These are sufficient for many
+ PCRE contains an internal set of tables that are used when the final
+ argument of pcre_compile() is NULL. These are sufficient for many
applications. Normally, the internal tables recognize only ASCII char-
acters. However, when PCRE is built, it is possible to cause the inter-
nal tables to be rebuilt in the default "C" locale of the local system,
which may cause them to be different.
- The internal tables can always be overridden by tables supplied by the
+ The internal tables can always be overridden by tables supplied by the
application that calls PCRE. These may be created in a different locale
- from the default. As more and more applications change to using Uni-
+ from the default. As more and more applications change to using Uni-
code, the need for this locale support is expected to die away.
- External tables are built by calling the pcre_maketables() function,
- which has no arguments, in the relevant locale. The result can then be
- passed to pcre_compile() or pcre_exec() as often as necessary. For
- example, to build and use tables that are appropriate for the French
- locale (where accented characters with values greater than 128 are
+ External tables are built by calling the pcre_maketables() function,
+ which has no arguments, in the relevant locale. The result can then be
+ passed to pcre_compile() or pcre_exec() as often as necessary. For
+ example, to build and use tables that are appropriate for the French
+ locale (where accented characters with values greater than 128 are
treated as letters), the following code could be used:
setlocale(LC_CTYPE, "fr_FR");
tables = pcre_maketables();
re = pcre_compile(..., tables);
- The locale name "fr_FR" is used on Linux and other Unix-like systems;
+ The locale name "fr_FR" is used on Linux and other Unix-like systems;
if you are using Windows, the name for the French locale is "french".
- When pcre_maketables() runs, the tables are built in memory that is
- obtained via pcre_malloc. It is the caller's responsibility to ensure
- that the memory containing the tables remains available for as long as
+ When pcre_maketables() runs, the tables are built in memory that is
+ obtained via pcre_malloc. It is the caller's responsibility to ensure
+ that the memory containing the tables remains available for as long as
it is needed.
The pointer that is passed to pcre_compile() is saved with the compiled
- pattern, and the same tables are used via this pointer by pcre_study()
+ pattern, and the same tables are used via this pointer by pcre_study()
and normally also by pcre_exec(). Thus, by default, for any single pat-
tern, compilation, studying and matching all happen in the same locale,
but different patterns can be compiled in different locales.
- It is possible to pass a table pointer or NULL (indicating the use of
- the internal tables) to pcre_exec(). Although not intended for this
- purpose, this facility could be used to match a pattern in a different
+ It is possible to pass a table pointer or NULL (indicating the use of
+ the internal tables) to pcre_exec(). Although not intended for this
+ purpose, this facility could be used to match a pattern in a different
locale from the one in which it was compiled. Passing table pointers at
run time is discussed below in the section on matching a pattern.
@@ -1623,15 +1630,15 @@
int pcre_fullinfo(const pcre *code, const pcre_extra *extra,
int what, void *where);
- The pcre_fullinfo() function returns information about a compiled pat-
+ The pcre_fullinfo() function returns information about a compiled pat-
tern. It replaces the obsolete pcre_info() function, which is neverthe-
less retained for backwards compability (and is documented below).
- The first argument for pcre_fullinfo() is a pointer to the compiled
- pattern. The second argument is the result of pcre_study(), or NULL if
- the pattern was not studied. The third argument specifies which piece
- of information is required, and the fourth argument is a pointer to a
- variable to receive the data. The yield of the function is zero for
+ The first argument for pcre_fullinfo() is a pointer to the compiled
+ pattern. The second argument is the result of pcre_study(), or NULL if
+ the pattern was not studied. The third argument specifies which piece
+ of information is required, and the fourth argument is a pointer to a
+ variable to receive the data. The yield of the function is zero for
success, or one of the following negative numbers:
PCRE_ERROR_NULL the argument code was NULL
@@ -1639,9 +1646,9 @@
PCRE_ERROR_BADMAGIC the "magic number" was not found
PCRE_ERROR_BADOPTION the value of what was invalid
- The "magic number" is placed at the start of each compiled pattern as
- an simple check against passing an arbitrary memory pointer. Here is a
- typical call of pcre_fullinfo(), to obtain the length of the compiled
+ The "magic number" is placed at the start of each compiled pattern as
+ an simple check against passing an arbitrary memory pointer. Here is a
+ typical call of pcre_fullinfo(), to obtain the length of the compiled
pattern:
int rc;
@@ -1652,131 +1659,131 @@
PCRE_INFO_SIZE, /* what is required */
&length); /* where to put the data */
- The possible values for the third argument are defined in pcre.h, and
+ The possible values for the third argument are defined in pcre.h, and
are as follows:
PCRE_INFO_BACKREFMAX
- Return the number of the highest back reference in the pattern. The
- fourth argument should point to an int variable. Zero is returned if
+ Return the number of the highest back reference in the pattern. The
+ fourth argument should point to an int variable. Zero is returned if
there are no back references.
PCRE_INFO_CAPTURECOUNT
- Return the number of capturing subpatterns in the pattern. The fourth
+ Return the number of capturing subpatterns in the pattern. The fourth
argument should point to an int variable.
PCRE_INFO_DEFAULT_TABLES
- Return a pointer to the internal default character tables within PCRE.
- The fourth argument should point to an unsigned char * variable. This
+ Return a pointer to the internal default character tables within PCRE.
+ The fourth argument should point to an unsigned char * variable. This
information call is provided for internal use by the pcre_study() func-
- tion. External callers can cause PCRE to use its internal tables by
+ tion. External callers can cause PCRE to use its internal tables by
passing a NULL table pointer.
PCRE_INFO_FIRSTBYTE
- Return information about the first byte of any matched string, for a
- non-anchored pattern. The fourth argument should point to an int vari-
- able. (This option used to be called PCRE_INFO_FIRSTCHAR; the old name
+ Return information about the first byte of any matched string, for a
+ non-anchored pattern. The fourth argument should point to an int vari-
+ able. (This option used to be called PCRE_INFO_FIRSTCHAR; the old name
is still recognized for backwards compatibility.)
- If there is a fixed first byte, for example, from a pattern such as
+ If there is a fixed first byte, for example, from a pattern such as
(cat|cow|coyote), its value is returned. Otherwise, if either
- (a) the pattern was compiled with the PCRE_MULTILINE option, and every
+ (a) the pattern was compiled with the PCRE_MULTILINE option, and every
branch starts with "^", or
(b) every branch of the pattern starts with ".*" and PCRE_DOTALL is not
set (if it were set, the pattern would be anchored),
- -1 is returned, indicating that the pattern matches only at the start
- of a subject string or after any newline within the string. Otherwise
+ -1 is returned, indicating that the pattern matches only at the start
+ of a subject string or after any newline within the string. Otherwise
-2 is returned. For anchored patterns, -2 is returned.
PCRE_INFO_FIRSTTABLE
- If the pattern was studied, and this resulted in the construction of a
+ If the pattern was studied, and this resulted in the construction of a
256-bit table indicating a fixed set of bytes for the first byte in any
- matching string, a pointer to the table is returned. Otherwise NULL is
- returned. The fourth argument should point to an unsigned char * vari-
+ matching string, a pointer to the table is returned. Otherwise NULL is
+ returned. The fourth argument should point to an unsigned char * vari-
able.
PCRE_INFO_HASCRORLF
- Return 1 if the pattern contains any explicit matches for CR or LF
- characters, otherwise 0. The fourth argument should point to an int
- variable. An explicit match is either a literal CR or LF character, or
+ Return 1 if the pattern contains any explicit matches for CR or LF
+ characters, otherwise 0. The fourth argument should point to an int
+ variable. An explicit match is either a literal CR or LF character, or
\r or \n.
PCRE_INFO_JCHANGED
- Return 1 if the (?J) or (?-J) option setting is used in the pattern,
- otherwise 0. The fourth argument should point to an int variable. (?J)
+ Return 1 if the (?J) or (?-J) option setting is used in the pattern,
+ otherwise 0. The fourth argument should point to an int variable. (?J)
and (?-J) set and unset the local PCRE_DUPNAMES option, respectively.
PCRE_INFO_LASTLITERAL
- Return the value of the rightmost literal byte that must exist in any
- matched string, other than at its start, if such a byte has been
+ Return the value of the rightmost literal byte that must exist in any
+ matched string, other than at its start, if such a byte has been
recorded. The fourth argument should point to an int variable. If there
- is no such byte, -1 is returned. For anchored patterns, a last literal
- byte is recorded only if it follows something of variable length. For
+ is no such byte, -1 is returned. For anchored patterns, a last literal
+ byte is recorded only if it follows something of variable length. For
example, for the pattern /^a\d+z\d+/ the returned value is "z", but for
/^a\dz\d/ the returned value is -1.
PCRE_INFO_MINLENGTH
- If the pattern was studied and a minimum length for matching subject
- strings was computed, its value is returned. Otherwise the returned
- value is -1. The value is a number of characters, not bytes (this may
- be relevant in UTF-8 mode). The fourth argument should point to an int
- variable. A non-negative value is a lower bound to the length of any
- matching string. There may not be any strings of that length that do
+ If the pattern was studied and a minimum length for matching subject
+ strings was computed, its value is returned. Otherwise the returned
+ value is -1. The value is a number of characters, not bytes (this may
+ be relevant in UTF-8 mode). The fourth argument should point to an int
+ variable. A non-negative value is a lower bound to the length of any
+ matching string. There may not be any strings of that length that do
actually match, but every string that does match is at least that long.
PCRE_INFO_NAMECOUNT
PCRE_INFO_NAMEENTRYSIZE
PCRE_INFO_NAMETABLE
- PCRE supports the use of named as well as numbered capturing parenthe-
- ses. The names are just an additional way of identifying the parenthe-
+ PCRE supports the use of named as well as numbered capturing parenthe-
+ ses. The names are just an additional way of identifying the parenthe-
ses, which still acquire numbers. Several convenience functions such as
- pcre_get_named_substring() are provided for extracting captured sub-
- strings by name. It is also possible to extract the data directly, by
- first converting the name to a number in order to access the correct
+ pcre_get_named_substring() are provided for extracting captured sub-
+ strings by name. It is also possible to extract the data directly, by
+ first converting the name to a number in order to access the correct
pointers in the output vector (described with pcre_exec() below). To do
- the conversion, you need to use the name-to-number map, which is
+ the conversion, you need to use the name-to-number map, which is
described by these three values.
The map consists of a number of fixed-size entries. PCRE_INFO_NAMECOUNT
gives the number of entries, and PCRE_INFO_NAMEENTRYSIZE gives the size
- of each entry; both of these return an int value. The entry size
- depends on the length of the longest name. PCRE_INFO_NAMETABLE returns
- a pointer to the first entry of the table (a pointer to char). The
+ of each entry; both of these return an int value. The entry size
+ depends on the length of the longest name. PCRE_INFO_NAMETABLE returns
+ a pointer to the first entry of the table (a pointer to char). The
first two bytes of each entry are the number of the capturing parenthe-
- sis, most significant byte first. The rest of the entry is the corre-
+ sis, most significant byte first. The rest of the entry is the corre-
sponding name, zero terminated.
- The names are in alphabetical order. Duplicate names may appear if (?|
+ The names are in alphabetical order. Duplicate names may appear if (?|
is used to create multiple groups with the same number, as described in
- the section on duplicate subpattern numbers in the pcrepattern page.
- Duplicate names for subpatterns with different numbers are permitted
- only if PCRE_DUPNAMES is set. In all cases of duplicate names, they
- appear in the table in the order in which they were found in the pat-
- tern. In the absence of (?| this is the order of increasing number;
+ the section on duplicate subpattern numbers in the pcrepattern page.
+ Duplicate names for subpatterns with different numbers are permitted
+ only if PCRE_DUPNAMES is set. In all cases of duplicate names, they
+ appear in the table in the order in which they were found in the pat-
+ tern. In the absence of (?| this is the order of increasing number;
when (?| is used this is not necessarily the case because later subpat-
terns may have lower numbers.
- As a simple example of the name/number table, consider the following
- pattern (assume PCRE_EXTENDED is set, so white space - including new-
+ As a simple example of the name/number table, consider the following
+ pattern (assume PCRE_EXTENDED is set, so white space - including new-
lines - is ignored):
(?<date> (?<year>(\d\d)?\d\d) -
(?<month>\d\d) - (?<day>\d\d) )
- There are four named subpatterns, so the table has four entries, and
- each entry in the table is eight bytes long. The table is as follows,
+ There are four named subpatterns, so the table has four entries, and
+ each entry in the table is eight bytes long. The table is as follows,
with non-printing bytes shows in hexadecimal, and undefined bytes shown
as ??:
@@ -1785,31 +1792,31 @@
00 04 m o n t h 00
00 02 y e a r 00 ??
- When writing code to extract data from named subpatterns using the
- name-to-number map, remember that the length of the entries is likely
+ When writing code to extract data from named subpatterns using the
+ name-to-number map, remember that the length of the entries is likely
to be different for each compiled pattern.
PCRE_INFO_OKPARTIAL
- Return 1 if the pattern can be used for partial matching with
- pcre_exec(), otherwise 0. The fourth argument should point to an int
- variable. From release 8.00, this always returns 1, because the
- restrictions that previously applied to partial matching have been
- lifted. The pcrepartial documentation gives details of partial match-
+ Return 1 if the pattern can be used for partial matching with
+ pcre_exec(), otherwise 0. The fourth argument should point to an int
+ variable. From release 8.00, this always returns 1, because the
+ restrictions that previously applied to partial matching have been
+ lifted. The pcrepartial documentation gives details of partial match-
ing.
PCRE_INFO_OPTIONS
- Return a copy of the options with which the pattern was compiled. The
- fourth argument should point to an unsigned long int variable. These
+ Return a copy of the options with which the pattern was compiled. The
+ fourth argument should point to an unsigned long int variable. These
option bits are those specified in the call to pcre_compile(), modified
by any top-level option settings at the start of the pattern itself. In
- other words, they are the options that will be in force when matching
- starts. For example, if the pattern /(?im)abc(?-i)d/ is compiled with
- the PCRE_EXTENDED option, the result is PCRE_CASELESS, PCRE_MULTILINE,
+ other words, they are the options that will be in force when matching
+ starts. For example, if the pattern /(?im)abc(?-i)d/ is compiled with
+ the PCRE_EXTENDED option, the result is PCRE_CASELESS, PCRE_MULTILINE,
and PCRE_EXTENDED.
- A pattern is automatically anchored by PCRE if all of its top-level
+ A pattern is automatically anchored by PCRE if all of its top-level
alternatives begin with one of the following:
^ unless PCRE_MULTILINE is set
@@ -1823,7 +1830,7 @@
PCRE_INFO_SIZE
- Return the size of the compiled pattern, that is, the value that was
+ Return the size of the compiled pattern, that is, the value that was
passed as the argument to pcre_malloc() when PCRE was getting memory in
which to place the compiled data. The fourth argument should point to a
size_t variable.
@@ -1831,10 +1838,10 @@
PCRE_INFO_STUDYSIZE
Return the size of the data block pointed to by the study_data field in
- a pcre_extra block. That is, it is the value that was passed to
+ a pcre_extra block. That is, it is the value that was passed to
pcre_malloc() when PCRE was getting memory into which to place the data
- created by pcre_study(). If pcre_extra is NULL, or there is no study
- data, zero is returned. The fourth argument should point to a size_t
+ created by pcre_study(). If pcre_extra is NULL, or there is no study
+ data, zero is returned. The fourth argument should point to a size_t
variable.
@@ -1842,21 +1849,21 @@
int pcre_info(const pcre *code, int *optptr, int *firstcharptr);
- The pcre_info() function is now obsolete because its interface is too
- restrictive to return all the available data about a compiled pattern.
- New programs should use pcre_fullinfo() instead. The yield of
- pcre_info() is the number of capturing subpatterns, or one of the fol-
+ The pcre_info() function is now obsolete because its interface is too
+ restrictive to return all the available data about a compiled pattern.
+ New programs should use pcre_fullinfo() instead. The yield of
+ pcre_info() is the number of capturing subpatterns, or one of the fol-
lowing negative numbers:
PCRE_ERROR_NULL the argument code was NULL
PCRE_ERROR_BADMAGIC the "magic number" was not found
- If the optptr argument is not NULL, a copy of the options with which
- the pattern was compiled is placed in the integer it points to (see
+ If the optptr argument is not NULL, a copy of the options with which
+ the pattern was compiled is placed in the integer it points to (see
PCRE_INFO_OPTIONS above).
- If the pattern is not anchored and the firstcharptr argument is not
- NULL, it is used to pass back information about the first character of
+ If the pattern is not anchored and the firstcharptr argument is not
+ NULL, it is used to pass back information about the first character of
any matched string (see PCRE_INFO_FIRSTBYTE above).
@@ -1864,21 +1871,21 @@
int pcre_refcount(pcre *code, int adjust);
- The pcre_refcount() function is used to maintain a reference count in
+ The pcre_refcount() function is used to maintain a reference count in
the data block that contains a compiled pattern. It is provided for the
- benefit of applications that operate in an object-oriented manner,
+ benefit of applications that operate in an object-oriented manner,
where different parts of the application may be using the same compiled
pattern, but you want to free the block when they are all done.
When a pattern is compiled, the reference count field is initialized to
- zero. It is changed only by calling this function, whose action is to
- add the adjust value (which may be positive or negative) to it. The
+ zero. It is changed only by calling this function, whose action is to
+ add the adjust value (which may be positive or negative) to it. The
yield of the function is the new value. However, the value of the count
- is constrained to lie between 0 and 65535, inclusive. If the new value
+ is constrained to lie between 0 and 65535, inclusive. If the new value
is outside these limits, it is forced to the appropriate limit value.
- Except when it is zero, the reference count is not correctly preserved
- if a pattern is compiled on one host and then transferred to a host
+ Except when it is zero, the reference count is not correctly preserved
+ if a pattern is compiled on one host and then transferred to a host
whose byte-order is different. (This seems a highly unlikely scenario.)
@@ -1888,18 +1895,18 @@
const char *subject, int length, int startoffset,
int options, int *ovector, int ovecsize);
- The function pcre_exec() is called to match a subject string against a
- compiled pattern, which is passed in the code argument. If the pattern
- was studied, the result of the study should be passed in the extra
- argument. This function is the main matching facility of the library,
+ The function pcre_exec() is called to match a subject string against a
+ compiled pattern, which is passed in the code argument. If the pattern
+ was studied, the result of the study should be passed in the extra
+ argument. This function is the main matching facility of the library,
and it operates in a Perl-like manner. For specialist use there is also
- an alternative matching function, which is described below in the sec-
+ an alternative matching function, which is described below in the sec-
tion about the pcre_dfa_exec() function.
- In most applications, the pattern will have been compiled (and option-
- ally studied) in the same process that calls pcre_exec(). However, it
+ In most applications, the pattern will have been compiled (and option-
+ ally studied) in the same process that calls pcre_exec(). However, it
is possible to save compiled patterns and study data, and then use them
- later in different processes, possibly even on different hosts. For a
+ later in different processes, possibly even on different hosts. For a
discussion about this, see the pcreprecompile documentation.
Here is an example of a simple call to pcre_exec():
@@ -1918,10 +1925,10 @@
Extra data for pcre_exec()
- If the extra argument is not NULL, it must point to a pcre_extra data
- block. The pcre_study() function returns such a block (when it doesn't
- return NULL), but you can also create one for yourself, and pass addi-
- tional information in it. The pcre_extra block contains the following
+ If the extra argument is not NULL, it must point to a pcre_extra data
+ block. The pcre_study() function returns such a block (when it doesn't
+ return NULL), but you can also create one for yourself, and pass addi-
+ tional information in it. The pcre_extra block contains the following
fields (not necessarily in this order):
unsigned long int flags;
@@ -1932,7 +1939,7 @@
const unsigned char *tables;
unsigned char **mark;
- The flags field is a bitmap that specifies which of the other fields
+ The flags field is a bitmap that specifies which of the other fields
are set. The flag bits are:
PCRE_EXTRA_STUDY_DATA
@@ -1942,96 +1949,96 @@
PCRE_EXTRA_TABLES
PCRE_EXTRA_MARK
- Other flag bits should be set to zero. The study_data field is set in
- the pcre_extra block that is returned by pcre_study(), together with
+ Other flag bits should be set to zero. The study_data field is set in
+ the pcre_extra block that is returned by pcre_study(), together with
the appropriate flag bit. You should not set this yourself, but you may
- add to the block by setting the other fields and their corresponding
+ add to the block by setting the other fields and their corresponding
flag bits.
The match_limit field provides a means of preventing PCRE from using up
- a vast amount of resources when running patterns that are not going to
- match, but which have a very large number of possibilities in their
- search trees. The classic example is a pattern that uses nested unlim-
+ a vast amount of resources when running patterns that are not going to
+ match, but which have a very large number of possibilities in their
+ search trees. The classic example is a pattern that uses nested unlim-
ited repeats.
- Internally, PCRE uses a function called match() which it calls repeat-
- edly (sometimes recursively). The limit set by match_limit is imposed
- on the number of times this function is called during a match, which
- has the effect of limiting the amount of backtracking that can take
+ Internally, PCRE uses a function called match() which it calls repeat-
+ edly (sometimes recursively). The limit set by match_limit is imposed
+ on the number of times this function is called during a match, which
+ has the effect of limiting the amount of backtracking that can take
place. For patterns that are not anchored, the count restarts from zero
for each position in the subject string.
- The default value for the limit can be set when PCRE is built; the
- default default is 10 million, which handles all but the most extreme
- cases. You can override the default by suppling pcre_exec() with a
- pcre_extra block in which match_limit is set, and
- PCRE_EXTRA_MATCH_LIMIT is set in the flags field. If the limit is
+ The default value for the limit can be set when PCRE is built; the
+ default default is 10 million, which handles all but the most extreme
+ cases. You can override the default by suppling pcre_exec() with a
+ pcre_extra block in which match_limit is set, and
+ PCRE_EXTRA_MATCH_LIMIT is set in the flags field. If the limit is
exceeded, pcre_exec() returns PCRE_ERROR_MATCHLIMIT.
- The match_limit_recursion field is similar to match_limit, but instead
+ The match_limit_recursion field is similar to match_limit, but instead
of limiting the total number of times that match() is called, it limits
- the depth of recursion. The recursion depth is a smaller number than
- the total number of calls, because not all calls to match() are recur-
+ the depth of recursion. The recursion depth is a smaller number than
+ the total number of calls, because not all calls to match() are recur-
sive. This limit is of use only if it is set smaller than match_limit.
- Limiting the recursion depth limits the amount of stack that can be
+ Limiting the recursion depth limits the amount of stack that can be
used, or, when PCRE has been compiled to use memory on the heap instead
of the stack, the amount of heap memory that can be used.
- The default value for match_limit_recursion can be set when PCRE is
- built; the default default is the same value as the default for
- match_limit. You can override the default by suppling pcre_exec() with
- a pcre_extra block in which match_limit_recursion is set, and
- PCRE_EXTRA_MATCH_LIMIT_RECURSION is set in the flags field. If the
+ The default value for match_limit_recursion can be set when PCRE is
+ built; the default default is the same value as the default for
+ match_limit. You can override the default by suppling pcre_exec() with
+ a pcre_extra block in which match_limit_recursion is set, and
+ PCRE_EXTRA_MATCH_LIMIT_RECURSION is set in the flags field. If the
limit is exceeded, pcre_exec() returns PCRE_ERROR_RECURSIONLIMIT.
- The callout_data field is used in conjunction with the "callout" fea-
+ The callout_data field is used in conjunction with the "callout" fea-
ture, and is described in the pcrecallout documentation.
- The tables field is used to pass a character tables pointer to
- pcre_exec(); this overrides the value that is stored with the compiled
- pattern. A non-NULL value is stored with the compiled pattern only if
- custom tables were supplied to pcre_compile() via its tableptr argu-
+ The tables field is used to pass a character tables pointer to
+ pcre_exec(); this overrides the value that is stored with the compiled
+ pattern. A non-NULL value is stored with the compiled pattern only if
+ custom tables were supplied to pcre_compile() via its tableptr argu-
ment. If NULL is passed to pcre_exec() using this mechanism, it forces
- PCRE's internal tables to be used. This facility is helpful when re-
- using patterns that have been saved after compiling with an external
- set of tables, because the external tables might be at a different
- address when pcre_exec() is called. See the pcreprecompile documenta-
+ PCRE's internal tables to be used. This facility is helpful when re-
+ using patterns that have been saved after compiling with an external
+ set of tables, because the external tables might be at a different
+ address when pcre_exec() is called. See the pcreprecompile documenta-
tion for a discussion of saving compiled patterns for later use.
- If PCRE_EXTRA_MARK is set in the flags field, the mark field must be
- set to point to a char * variable. If the pattern contains any back-
- tracking control verbs such as (*MARK:NAME), and the execution ends up
- with a name to pass back, a pointer to the name string (zero termi-
- nated) is placed in the variable pointed to by the mark field. The
- names are within the compiled pattern; if you wish to retain such a
- name you must copy it before freeing the memory of a compiled pattern.
- If there is no name to pass back, the variable pointed to by the mark
- field set to NULL. For details of the backtracking control verbs, see
+ If PCRE_EXTRA_MARK is set in the flags field, the mark field must be
+ set to point to a char * variable. If the pattern contains any back-
+ tracking control verbs such as (*MARK:NAME), and the execution ends up
+ with a name to pass back, a pointer to the name string (zero termi-
+ nated) is placed in the variable pointed to by the mark field. The
+ names are within the compiled pattern; if you wish to retain such a
+ name you must copy it before freeing the memory of a compiled pattern.
+ If there is no name to pass back, the variable pointed to by the mark
+ field set to NULL. For details of the backtracking control verbs, see
the section entitled "Backtracking control" in the pcrepattern documen-
tation.
Option bits for pcre_exec()
- The unused bits of the options argument for pcre_exec() must be zero.
- The only bits that may be set are PCRE_ANCHORED, PCRE_NEWLINE_xxx,
- PCRE_NOTBOL, PCRE_NOTEOL, PCRE_NOTEMPTY, PCRE_NOTEMPTY_ATSTART,
- PCRE_NO_START_OPTIMIZE, PCRE_NO_UTF8_CHECK, PCRE_PARTIAL_SOFT, and
+ The unused bits of the options argument for pcre_exec() must be zero.
+ The only bits that may be set are PCRE_ANCHORED, PCRE_NEWLINE_xxx,
+ PCRE_NOTBOL, PCRE_NOTEOL, PCRE_NOTEMPTY, PCRE_NOTEMPTY_ATSTART,
+ PCRE_NO_START_OPTIMIZE, PCRE_NO_UTF8_CHECK, PCRE_PARTIAL_SOFT, and
PCRE_PARTIAL_HARD.
PCRE_ANCHORED
- The PCRE_ANCHORED option limits pcre_exec() to matching at the first
- matching position. If a pattern was compiled with PCRE_ANCHORED, or
- turned out to be anchored by virtue of its contents, it cannot be made
+ The PCRE_ANCHORED option limits pcre_exec() to matching at the first
+ matching position. If a pattern was compiled with PCRE_ANCHORED, or
+ turned out to be anchored by virtue of its contents, it cannot be made
unachored at matching time.
PCRE_BSR_ANYCRLF
PCRE_BSR_UNICODE
These options (which are mutually exclusive) control what the \R escape
- sequence matches. The choice is either to match only CR, LF, or CRLF,
- or to match any Unicode newline sequence. These options override the
+ sequence matches. The choice is either to match only CR, LF, or CRLF,
+ or to match any Unicode newline sequence. These options override the
choice that was made or defaulted when the pattern was compiled.
PCRE_NEWLINE_CR
@@ -2040,248 +2047,278 @@
PCRE_NEWLINE_ANYCRLF
PCRE_NEWLINE_ANY
- These options override the newline definition that was chosen or
- defaulted when the pattern was compiled. For details, see the descrip-
- tion of pcre_compile() above. During matching, the newline choice
- affects the behaviour of the dot, circumflex, and dollar metacharac-
- ters. It may also alter the way the match position is advanced after a
+ These options override the newline definition that was chosen or
+ defaulted when the pattern was compiled. For details, see the descrip-
+ tion of pcre_compile() above. During matching, the newline choice
+ affects the behaviour of the dot, circumflex, and dollar metacharac-
+ ters. It may also alter the way the match position is advanced after a
match failure for an unanchored pattern.
- When PCRE_NEWLINE_CRLF, PCRE_NEWLINE_ANYCRLF, or PCRE_NEWLINE_ANY is
- set, and a match attempt for an unanchored pattern fails when the cur-
- rent position is at a CRLF sequence, and the pattern contains no
- explicit matches for CR or LF characters, the match position is
+ When PCRE_NEWLINE_CRLF, PCRE_NEWLINE_ANYCRLF, or PCRE_NEWLINE_ANY is
+ set, and a match attempt for an unanchored pattern fails when the cur-
+ rent position is at a CRLF sequence, and the pattern contains no
+ explicit matches for CR or LF characters, the match position is
advanced by two characters instead of one, in other words, to after the
CRLF.
The above rule is a compromise that makes the most common cases work as
- expected. For example, if the pattern is .+A (and the PCRE_DOTALL
+ expected. For example, if the pattern is .+A (and the PCRE_DOTALL
option is not set), it does not match the string "\r\nA" because, after
- failing at the start, it skips both the CR and the LF before retrying.
- However, the pattern [\r\n]A does match that string, because it con-
+ failing at the start, it skips both the CR and the LF before retrying.
+ However, the pattern [\r\n]A does match that string, because it con-
tains an explicit CR or LF reference, and so advances only by one char-
acter after the first failure.
An explicit match for CR of LF is either a literal appearance of one of
- those characters, or one of the \r or \n escape sequences. Implicit
- matches such as [^X] do not count, nor does \s (which includes CR and
+ those characters, or one of the \r or \n escape sequences. Implicit
+ matches such as [^X] do not count, nor does \s (which includes CR and
LF in the characters that it matches).
- Notwithstanding the above, anomalous effects may still occur when CRLF
+ Notwithstanding the above, anomalous effects may still occur when CRLF
is a valid newline sequence and explicit \r or \n escapes appear in the
pattern.
PCRE_NOTBOL
This option specifies that first character of the subject string is not
- the beginning of a line, so the circumflex metacharacter should not
- match before it. Setting this without PCRE_MULTILINE (at compile time)
- causes circumflex never to match. This option affects only the behav-
+ the beginning of a line, so the circumflex metacharacter should not
+ match before it. Setting this without PCRE_MULTILINE (at compile time)
+ causes circumflex never to match. This option affects only the behav-
iour of the circumflex metacharacter. It does not affect \A.
PCRE_NOTEOL
This option specifies that the end of the subject string is not the end
- of a line, so the dollar metacharacter should not match it nor (except
- in multiline mode) a newline immediately before it. Setting this with-
+ of a line, so the dollar metacharacter should not match it nor (except
+ in multiline mode) a newline immediately before it. Setting this with-
out PCRE_MULTILINE (at compile time) causes dollar never to match. This
- option affects only the behaviour of the dollar metacharacter. It does
+ option affects only the behaviour of the dollar metacharacter. It does
not affect \Z or \z.
PCRE_NOTEMPTY
An empty string is not considered to be a valid match if this option is
- set. If there are alternatives in the pattern, they are tried. If all
- the alternatives match the empty string, the entire match fails. For
+ set. If there are alternatives in the pattern, they are tried. If all
+ the alternatives match the empty string, the entire match fails. For
example, if the pattern
a?b?
- is applied to a string not beginning with "a" or "b", it matches an
- empty string at the start of the subject. With PCRE_NOTEMPTY set, this
+ is applied to a string not beginning with "a" or "b", it matches an
+ empty string at the start of the subject. With PCRE_NOTEMPTY set, this
match is not valid, so PCRE searches further into the string for occur-
rences of "a" or "b".
PCRE_NOTEMPTY_ATSTART
- This is like PCRE_NOTEMPTY, except that an empty string match that is
- not at the start of the subject is permitted. If the pattern is
+ This is like PCRE_NOTEMPTY, except that an empty string match that is
+ not at the start of the subject is permitted. If the pattern is
anchored, such a match can occur only if the pattern contains \K.
- Perl has no direct equivalent of PCRE_NOTEMPTY or
- PCRE_NOTEMPTY_ATSTART, but it does make a special case of a pattern
- match of the empty string within its split() function, and when using
- the /g modifier. It is possible to emulate Perl's behaviour after
+ Perl has no direct equivalent of PCRE_NOTEMPTY or
+ PCRE_NOTEMPTY_ATSTART, but it does make a special case of a pattern
+ match of the empty string within its split() function, and when using
+ the /g modifier. It is possible to emulate Perl's behaviour after
matching a null string by first trying the match again at the same off-
- set with PCRE_NOTEMPTY_ATSTART and PCRE_ANCHORED, and then if that
+ set with PCRE_NOTEMPTY_ATSTART and PCRE_ANCHORED, and then if that
fails, by advancing the starting offset (see below) and trying an ordi-
- nary match again. There is some code that demonstrates how to do this
+ nary match again. There is some code that demonstrates how to do this
in the pcredemo sample program.
PCRE_NO_START_OPTIMIZE
- There are a number of optimizations that pcre_exec() uses at the start
- of a match, in order to speed up the process. For example, if it is
+ There are a number of optimizations that pcre_exec() uses at the start
+ of a match, in order to speed up the process. For example, if it is
known that an unanchored match must start with a specific character, it
- searches the subject for that character, and fails immediately if it
- cannot find it, without actually running the main matching function.
+ searches the subject for that character, and fails immediately if it
+ cannot find it, without actually running the main matching function.
This means that a special item such as (*COMMIT) at the start of a pat-
- tern is not considered until after a suitable starting point for the
- match has been found. When callouts are in use, these "start-up" opti-
- mizations can cause them to be skipped if the pattern is never actually
- used. The PCRE_NO_START_OPTIMIZE option disables the start-up optimiza-
- tions, causing performance to suffer, but ensuring that the callouts do
- occur, and that items such as (*COMMIT) are considered at every possi-
- ble starting position in the subject string.
+ tern is not considered until after a suitable starting point for the
+ match has been found. When callouts or (*MARK) items are in use, these
+ "start-up" optimizations can cause them to be skipped if the pattern is
+ never actually used. The start-up optimizations are in effect a pre-
+ scan of the subject that takes place before the pattern is run.
+ The PCRE_NO_START_OPTIMIZE option disables the start-up optimizations,
+ possibly causing performance to suffer, but ensuring that in cases
+ where the result is "no match", the callouts do occur, and that items
+ such as (*COMMIT) and (*MARK) are considered at every possible starting
+ position in the subject string. Setting PCRE_NO_START_OPTIMIZE can
+ change the outcome of a matching operation. Consider the pattern
+
+ (*COMMIT)ABC
+
+ When this is compiled, PCRE records the fact that a match must start
+ with the character "A". Suppose the subject string is "DEFABC". The
+ start-up optimization scans along the subject, finds "A" and runs the
+ first match attempt from there. The (*COMMIT) item means that the pat-
+ tern must match the current starting position, which in this case, it
+ does. However, if the same match is run with PCRE_NO_START_OPTIMIZE
+ set, the initial scan along the subject string does not happen. The
+ first match attempt is run starting from "D" and when this fails,
+ (*COMMIT) prevents any further matches being tried, so the overall
+ result is "no match". If the pattern is studied, more start-up opti-
+ mizations may be used. For example, a minimum length for the subject
+ may be recorded. Consider the pattern
+
+ (*MARK:A)(X|Y)
+
+ The minimum length for a match is one character. If the subject is
+ "ABC", there will be attempts to match "ABC", "BC", "C", and then
+ finally an empty string. If the pattern is studied, the final attempt
+ does not take place, because PCRE knows that the subject is too short,
+ and so the (*MARK) is never encountered. In this case, studying the
+ pattern does not affect the overall match result, which is still "no
+ match", but it does affect the auxiliary information that is returned.
+
PCRE_NO_UTF8_CHECK
When PCRE_UTF8 is set at compile time, the validity of the subject as a
- UTF-8 string is automatically checked when pcre_exec() is subsequently
- called. The value of startoffset is also checked to ensure that it
- points to the start of a UTF-8 character. There is a discussion about
- the validity of UTF-8 strings in the section on UTF-8 support in the
- main pcre page. If an invalid UTF-8 sequence of bytes is found,
- pcre_exec() returns the error PCRE_ERROR_BADUTF8. If startoffset con-
+ UTF-8 string is automatically checked when pcre_exec() is subsequently
+ called. The value of startoffset is also checked to ensure that it
+ points to the start of a UTF-8 character. There is a discussion about
+ the validity of UTF-8 strings in the section on UTF-8 support in the
+ main pcre page. If an invalid UTF-8 sequence of bytes is found,
+ pcre_exec() returns the error PCRE_ERROR_BADUTF8. If startoffset con-
tains an invalid value, PCRE_ERROR_BADUTF8_OFFSET is returned.
- If you already know that your subject is valid, and you want to skip
- these checks for performance reasons, you can set the
- PCRE_NO_UTF8_CHECK option when calling pcre_exec(). You might want to
- do this for the second and subsequent calls to pcre_exec() if you are
- making repeated calls to find all the matches in a single subject
- string. However, you should be sure that the value of startoffset
- points to the start of a UTF-8 character. When PCRE_NO_UTF8_CHECK is
- set, the effect of passing an invalid UTF-8 string as a subject, or a
- value of startoffset that does not point to the start of a UTF-8 char-
+ If you already know that your subject is valid, and you want to skip
+ these checks for performance reasons, you can set the
+ PCRE_NO_UTF8_CHECK option when calling pcre_exec(). You might want to
+ do this for the second and subsequent calls to pcre_exec() if you are
+ making repeated calls to find all the matches in a single subject
+ string. However, you should be sure that the value of startoffset
+ points to the start of a UTF-8 character. When PCRE_NO_UTF8_CHECK is
+ set, the effect of passing an invalid UTF-8 string as a subject, or a
+ value of startoffset that does not point to the start of a UTF-8 char-
acter, is undefined. Your program may crash.
PCRE_PARTIAL_HARD
PCRE_PARTIAL_SOFT
- These options turn on the partial matching feature. For backwards com-
- patibility, PCRE_PARTIAL is a synonym for PCRE_PARTIAL_SOFT. A partial
- match occurs if the end of the subject string is reached successfully,
- but there are not enough subject characters to complete the match. If
- this happens when PCRE_PARTIAL_HARD is set, pcre_exec() immediately
- returns PCRE_ERROR_PARTIAL. Otherwise, if PCRE_PARTIAL_SOFT is set,
- matching continues by testing any other alternatives. Only if they all
- fail is PCRE_ERROR_PARTIAL returned (instead of PCRE_ERROR_NOMATCH).
+ These options turn on the partial matching feature. For backwards com-
+ patibility, PCRE_PARTIAL is a synonym for PCRE_PARTIAL_SOFT. A partial
+ match occurs if the end of the subject string is reached successfully,
+ but there are not enough subject characters to complete the match. If
+ this happens when PCRE_PARTIAL_HARD is set, pcre_exec() immediately
+ returns PCRE_ERROR_PARTIAL. Otherwise, if PCRE_PARTIAL_SOFT is set,
+ matching continues by testing any other alternatives. Only if they all
+ fail is PCRE_ERROR_PARTIAL returned (instead of PCRE_ERROR_NOMATCH).
The portion of the string that was inspected when the partial match was
- found is set as the first matching string. There is a more detailed
+ found is set as the first matching string. There is a more detailed
discussion in the pcrepartial documentation.
The string to be matched by pcre_exec()
- The subject string is passed to pcre_exec() as a pointer in subject, a
+ The subject string is passed to pcre_exec() as a pointer in subject, a
length (in bytes) in length, and a starting byte offset in startoffset.
In UTF-8 mode, the byte offset must point to the start of a UTF-8 char-
- acter. Unlike the pattern string, the subject may contain binary zero
- bytes. When the starting offset is zero, the search for a match starts
- at the beginning of the subject, and this is by far the most common
+ acter. Unlike the pattern string, the subject may contain binary zero
+ bytes. When the starting offset is zero, the search for a match starts
+ at the beginning of the subject, and this is by far the most common
case.
- A non-zero starting offset is useful when searching for another match
- in the same subject by calling pcre_exec() again after a previous suc-
- cess. Setting startoffset differs from just passing over a shortened
- string and setting PCRE_NOTBOL in the case of a pattern that begins
+ A non-zero starting offset is useful when searching for another match
+ in the same subject by calling pcre_exec() again after a previous suc-
+ cess. Setting startoffset differs from just passing over a shortened
+ string and setting PCRE_NOTBOL in the case of a pattern that begins
with any kind of lookbehind. For example, consider the pattern
\Biss\B
- which finds occurrences of "iss" in the middle of words. (\B matches
- only if the current position in the subject is not a word boundary.)
- When applied to the string "Mississipi" the first call to pcre_exec()
- finds the first occurrence. If pcre_exec() is called again with just
- the remainder of the subject, namely "issipi", it does not match,
+ which finds occurrences of "iss" in the middle of words. (\B matches
+ only if the current position in the subject is not a word boundary.)
+ When applied to the string "Mississipi" the first call to pcre_exec()
+ finds the first occurrence. If pcre_exec() is called again with just
+ the remainder of the subject, namely "issipi", it does not match,
because \B is always false at the start of the subject, which is deemed
- to be a word boundary. However, if pcre_exec() is passed the entire
+ to be a word boundary. However, if pcre_exec() is passed the entire
string again, but with startoffset set to 4, it finds the second occur-
- rence of "iss" because it is able to look behind the starting point to
+ rence of "iss" because it is able to look behind the starting point to
discover that it is preceded by a letter.
- If a non-zero starting offset is passed when the pattern is anchored,
+ If a non-zero starting offset is passed when the pattern is anchored,
one attempt to match at the given offset is made. This can only succeed
- if the pattern does not require the match to be at the start of the
+ if the pattern does not require the match to be at the start of the
subject.
How pcre_exec() returns captured substrings
- In general, a pattern matches a certain portion of the subject, and in
- addition, further substrings from the subject may be picked out by
- parts of the pattern. Following the usage in Jeffrey Friedl's book,
- this is called "capturing" in what follows, and the phrase "capturing
- subpattern" is used for a fragment of a pattern that picks out a sub-
- string. PCRE supports several other kinds of parenthesized subpattern
+ In general, a pattern matches a certain portion of the subject, and in
+ addition, further substrings from the subject may be picked out by
+ parts of the pattern. Following the usage in Jeffrey Friedl's book,
+ this is called "capturing" in what follows, and the phrase "capturing
+ subpattern" is used for a fragment of a pattern that picks out a sub-
+ string. PCRE supports several other kinds of parenthesized subpattern
that do not cause substrings to be captured.
Captured substrings are returned to the caller via a vector of integers
- whose address is passed in ovector. The number of elements in the vec-
- tor is passed in ovecsize, which must be a non-negative number. Note:
+ whose address is passed in ovector. The number of elements in the vec-
+ tor is passed in ovecsize, which must be a non-negative number. Note:
this argument is NOT the size of ovector in bytes.
- The first two-thirds of the vector is used to pass back captured sub-
- strings, each substring using a pair of integers. The remaining third
- of the vector is used as workspace by pcre_exec() while matching cap-
- turing subpatterns, and is not available for passing back information.
- The number passed in ovecsize should always be a multiple of three. If
+ The first two-thirds of the vector is used to pass back captured sub-
+ strings, each substring using a pair of integers. The remaining third
+ of the vector is used as workspace by pcre_exec() while matching cap-
+ turing subpatterns, and is not available for passing back information.
+ The number passed in ovecsize should always be a multiple of three. If
it is not, it is rounded down.
- When a match is successful, information about captured substrings is
- returned in pairs of integers, starting at the beginning of ovector,
- and continuing up to two-thirds of its length at the most. The first
- element of each pair is set to the byte offset of the first character
- in a substring, and the second is set to the byte offset of the first
- character after the end of a substring. Note: these values are always
+ When a match is successful, information about captured substrings is
+ returned in pairs of integers, starting at the beginning of ovector,
+ and continuing up to two-thirds of its length at the most. The first
+ element of each pair is set to the byte offset of the first character
+ in a substring, and the second is set to the byte offset of the first
+ character after the end of a substring. Note: these values are always
byte offsets, even in UTF-8 mode. They are not character counts.
- The first pair of integers, ovector[0] and ovector[1], identify the
- portion of the subject string matched by the entire pattern. The next
- pair is used for the first capturing subpattern, and so on. The value
+ The first pair of integers, ovector[0] and ovector[1], identify the
+ portion of the subject string matched by the entire pattern. The next
+ pair is used for the first capturing subpattern, and so on. The value
returned by pcre_exec() is one more than the highest numbered pair that
- has been set. For example, if two substrings have been captured, the
- returned value is 3. If there are no capturing subpatterns, the return
+ has been set. For example, if two substrings have been captured, the
+ returned value is 3. If there are no capturing subpatterns, the return
value from a successful match is 1, indicating that just the first pair
of offsets has been set.
If a capturing subpattern is matched repeatedly, it is the last portion
of the string that it matched that is returned.
- If the vector is too small to hold all the captured substring offsets,
+ If the vector is too small to hold all the captured substring offsets,
it is used as far as possible (up to two-thirds of its length), and the
- function returns a value of zero. If the substring offsets are not of
- interest, pcre_exec() may be called with ovector passed as NULL and
- ovecsize as zero. However, if the pattern contains back references and
- the ovector is not big enough to remember the related substrings, PCRE
- has to get additional memory for use during matching. Thus it is usu-
+ function returns a value of zero. If the substring offsets are not of
+ interest, pcre_exec() may be called with ovector passed as NULL and
+ ovecsize as zero. However, if the pattern contains back references and
+ the ovector is not big enough to remember the related substrings, PCRE
+ has to get additional memory for use during matching. Thus it is usu-
ally advisable to supply an ovector.
The pcre_fullinfo() function can be used to find out how many capturing
- subpatterns there are in a compiled pattern. The smallest size for
- ovector that will allow for n captured substrings, in addition to the
+ subpatterns there are in a compiled pattern. The smallest size for
+ ovector that will allow for n captured substrings, in addition to the
offsets of the substring matched by the whole pattern, is (n+1)*3.
- It is possible for capturing subpattern number n+1 to match some part
+ It is possible for capturing subpattern number n+1 to match some part
of the subject when subpattern n has not been used at all. For example,
- if the string "abc" is matched against the pattern (a|(z))(bc) the
+ if the string "abc" is matched against the pattern (a|(z))(bc) the
return from the function is 4, and subpatterns 1 and 3 are matched, but
- 2 is not. When this happens, both values in the offset pairs corre-
+ 2 is not. When this happens, both values in the offset pairs corre-
sponding to unused subpatterns are set to -1.
- Offset values that correspond to unused subpatterns at the end of the
- expression are also set to -1. For example, if the string "abc" is
- matched against the pattern (abc)(x(yz)?)? subpatterns 2 and 3 are not
- matched. The return from the function is 2, because the highest used
+ Offset values that correspond to unused subpatterns at the end of the
+ expression are also set to -1. For example, if the string "abc" is
+ matched against the pattern (abc)(x(yz)?)? subpatterns 2 and 3 are not
+ matched. The return from the function is 2, because the highest used
capturing subpattern number is 1. However, you can refer to the offsets
- for the second and third capturing subpatterns if you wish (assuming
+ for the second and third capturing subpatterns if you wish (assuming
the vector is large enough, of course).
- Some convenience functions are provided for extracting the captured
+ Some convenience functions are provided for extracting the captured
substrings as separate strings. These are described below.
Error return values from pcre_exec()
- If pcre_exec() fails, it returns a negative number. The following are
+ If pcre_exec() fails, it returns a negative number. The following are
defined in the header file:
PCRE_ERROR_NOMATCH (-1)
@@ -2290,7 +2327,7 @@
PCRE_ERROR_NULL (-2)
- Either code or subject was passed as NULL, or ovector was NULL and
+ Either code or subject was passed as NULL, or ovector was NULL and
ovecsize was not zero.
PCRE_ERROR_BADOPTION (-3)
@@ -2299,74 +2336,74 @@
PCRE_ERROR_BADMAGIC (-4)
- PCRE stores a 4-byte "magic number" at the start of the compiled code,
+ PCRE stores a 4-byte "magic number" at the start of the compiled code,
to catch the case when it is passed a junk pointer and to detect when a
pattern that was compiled in an environment of one endianness is run in
- an environment with the other endianness. This is the error that PCRE
+ an environment with the other endianness. This is the error that PCRE
gives when the magic number is not present.
PCRE_ERROR_UNKNOWN_OPCODE (-5)
While running the pattern match, an unknown item was encountered in the
- compiled pattern. This error could be caused by a bug in PCRE or by
+ compiled pattern. This error could be caused by a bug in PCRE or by
overwriting of the compiled pattern.
PCRE_ERROR_NOMEMORY (-6)
- If a pattern contains back references, but the ovector that is passed
+ If a pattern contains back references, but the ovector that is passed
to pcre_exec() is not big enough to remember the referenced substrings,
- PCRE gets a block of memory at the start of matching to use for this
- purpose. If the call via pcre_malloc() fails, this error is given. The
+ PCRE gets a block of memory at the start of matching to use for this
+ purpose. If the call via pcre_malloc() fails, this error is given. The
memory is automatically freed at the end of matching.
- This error is also given if pcre_stack_malloc() fails in pcre_exec().
- This can happen only when PCRE has been compiled with --disable-stack-
+ This error is also given if pcre_stack_malloc() fails in pcre_exec().
+ This can happen only when PCRE has been compiled with --disable-stack-
for-recursion.
PCRE_ERROR_NOSUBSTRING (-7)
- This error is used by the pcre_copy_substring(), pcre_get_substring(),
+ This error is used by the pcre_copy_substring(), pcre_get_substring(),
and pcre_get_substring_list() functions (see below). It is never
returned by pcre_exec().
PCRE_ERROR_MATCHLIMIT (-8)
- The backtracking limit, as specified by the match_limit field in a
- pcre_extra structure (or defaulted) was reached. See the description
+ The backtracking limit, as specified by the match_limit field in a
+ pcre_extra structure (or defaulted) was reached. See the description
above.
PCRE_ERROR_CALLOUT (-9)
This error is never generated by pcre_exec() itself. It is provided for
- use by callout functions that want to yield a distinctive error code.
+ use by callout functions that want to yield a distinctive error code.
See the pcrecallout documentation for details.
PCRE_ERROR_BADUTF8 (-10)
- A string that contains an invalid UTF-8 byte sequence was passed as a
+ A string that contains an invalid UTF-8 byte sequence was passed as a
subject.
PCRE_ERROR_BADUTF8_OFFSET (-11)
The UTF-8 byte sequence that was passed as a subject was valid, but the
- value of startoffset did not point to the beginning of a UTF-8 charac-
+ value of startoffset did not point to the beginning of a UTF-8 charac-
ter.
PCRE_ERROR_PARTIAL (-12)
- The subject string did not match, but it did match partially. See the
+ The subject string did not match, but it did match partially. See the
pcrepartial documentation for details of partial matching.
PCRE_ERROR_BADPARTIAL (-13)
- This code is no longer in use. It was formerly returned when the
- PCRE_PARTIAL option was used with a compiled pattern containing items
- that were not supported for partial matching. From release 8.00
+ This code is no longer in use. It was formerly returned when the
+ PCRE_PARTIAL option was used with a compiled pattern containing items
+ that were not supported for partial matching. From release 8.00
onwards, there are no restrictions on partial matching.
PCRE_ERROR_INTERNAL (-14)
- An unexpected internal error has occurred. This error could be caused
+ An unexpected internal error has occurred. This error could be caused
by a bug in PCRE or by overwriting of the compiled pattern.
PCRE_ERROR_BADCOUNT (-15)
@@ -2376,7 +2413,7 @@
PCRE_ERROR_RECURSIONLIMIT (-21)
The internal recursion limit, as specified by the match_limit_recursion
- field in a pcre_extra structure (or defaulted) was reached. See the
+ field in a pcre_extra structure (or defaulted) was reached. See the
description above.
PCRE_ERROR_BADNEWLINE (-23)
@@ -2399,78 +2436,78 @@
int pcre_get_substring_list(const char *subject,
int *ovector, int stringcount, const char ***listptr);
- Captured substrings can be accessed directly by using the offsets
- returned by pcre_exec() in ovector. For convenience, the functions
+ Captured substrings can be accessed directly by using the offsets
+ returned by pcre_exec() in ovector. For convenience, the functions
pcre_copy_substring(), pcre_get_substring(), and pcre_get_sub-
- string_list() are provided for extracting captured substrings as new,
- separate, zero-terminated strings. These functions identify substrings
- by number. The next section describes functions for extracting named
+ string_list() are provided for extracting captured substrings as new,
+ separate, zero-terminated strings. These functions identify substrings
+ by number. The next section describes functions for extracting named
substrings.
- A substring that contains a binary zero is correctly extracted and has
- a further zero added on the end, but the result is not, of course, a C
- string. However, you can process such a string by referring to the
- length that is returned by pcre_copy_substring() and pcre_get_sub-
+ A substring that contains a binary zero is correctly extracted and has
+ a further zero added on the end, but the result is not, of course, a C
+ string. However, you can process such a string by referring to the
+ length that is returned by pcre_copy_substring() and pcre_get_sub-
string(). Unfortunately, the interface to pcre_get_substring_list() is
- not adequate for handling strings containing binary zeros, because the
+ not adequate for handling strings containing binary zeros, because the
end of the final string is not independently indicated.
- The first three arguments are the same for all three of these func-
- tions: subject is the subject string that has just been successfully
+ The first three arguments are the same for all three of these func-
+ tions: subject is the subject string that has just been successfully
matched, ovector is a pointer to the vector of integer offsets that was
passed to pcre_exec(), and stringcount is the number of substrings that
- were captured by the match, including the substring that matched the
+ were captured by the match, including the substring that matched the
entire regular expression. This is the value returned by pcre_exec() if
- it is greater than zero. If pcre_exec() returned zero, indicating that
- it ran out of space in ovector, the value passed as stringcount should
+ it is greater than zero. If pcre_exec() returned zero, indicating that
+ it ran out of space in ovector, the value passed as stringcount should
be the number of elements in the vector divided by three.
- The functions pcre_copy_substring() and pcre_get_substring() extract a
- single substring, whose number is given as stringnumber. A value of
- zero extracts the substring that matched the entire pattern, whereas
- higher values extract the captured substrings. For pcre_copy_sub-
- string(), the string is placed in buffer, whose length is given by
- buffersize, while for pcre_get_substring() a new block of memory is
- obtained via pcre_malloc, and its address is returned via stringptr.
- The yield of the function is the length of the string, not including
+ The functions pcre_copy_substring() and pcre_get_substring() extract a
+ single substring, whose number is given as stringnumber. A value of
+ zero extracts the substring that matched the entire pattern, whereas
+ higher values extract the captured substrings. For pcre_copy_sub-
+ string(), the string is placed in buffer, whose length is given by
+ buffersize, while for pcre_get_substring() a new block of memory is
+ obtained via pcre_malloc, and its address is returned via stringptr.
+ The yield of the function is the length of the string, not including
the terminating zero, or one of these error codes:
PCRE_ERROR_NOMEMORY (-6)
- The buffer was too small for pcre_copy_substring(), or the attempt to
+ The buffer was too small for pcre_copy_substring(), or the attempt to
get memory failed for pcre_get_substring().
PCRE_ERROR_NOSUBSTRING (-7)
There is no substring whose number is stringnumber.
- The pcre_get_substring_list() function extracts all available sub-
- strings and builds a list of pointers to them. All this is done in a
+ The pcre_get_substring_list() function extracts all available sub-
+ strings and builds a list of pointers to them. All this is done in a
single block of memory that is obtained via pcre_malloc. The address of
- the memory block is returned via listptr, which is also the start of
- the list of string pointers. The end of the list is marked by a NULL
- pointer. The yield of the function is zero if all went well, or the
+ the memory block is returned via listptr, which is also the start of
+ the list of string pointers. The end of the list is marked by a NULL
+ pointer. The yield of the function is zero if all went well, or the
error code
PCRE_ERROR_NOMEMORY (-6)
if the attempt to get the memory block failed.
- When any of these functions encounter a substring that is unset, which
- can happen when capturing subpattern number n+1 matches some part of
- the subject, but subpattern n has not been used at all, they return an
+ When any of these functions encounter a substring that is unset, which
+ can happen when capturing subpattern number n+1 matches some part of
+ the subject, but subpattern n has not been used at all, they return an
empty string. This can be distinguished from a genuine zero-length sub-
- string by inspecting the appropriate offset in ovector, which is nega-
+ string by inspecting the appropriate offset in ovector, which is nega-
tive for unset substrings.
- The two convenience functions pcre_free_substring() and pcre_free_sub-
- string_list() can be used to free the memory returned by a previous
+ The two convenience functions pcre_free_substring() and pcre_free_sub-
+ string_list() can be used to free the memory returned by a previous
call of pcre_get_substring() or pcre_get_substring_list(), respec-
- tively. They do nothing more than call the function pointed to by
- pcre_free, which of course could be called directly from a C program.
- However, PCRE is used in some situations where it is linked via a spe-
- cial interface to another programming language that cannot use
- pcre_free directly; it is for these cases that the functions are pro-
+ tively. They do nothing more than call the function pointed to by
+ pcre_free, which of course could be called directly from a C program.
+ However, PCRE is used in some situations where it is linked via a spe-
+ cial interface to another programming language that cannot use
+ pcre_free directly; it is for these cases that the functions are pro-
vided.
@@ -2489,7 +2526,7 @@
int stringcount, const char *stringname,
const char **stringptr);
- To extract a substring by name, you first have to find associated num-
+ To extract a substring by name, you first have to find associated num-
ber. For example, for this pattern
(a+)b(?<xxx>\d+)...
@@ -2498,35 +2535,35 @@
be unique (PCRE_DUPNAMES was not set), you can find the number from the
name by calling pcre_get_stringnumber(). The first argument is the com-
piled pattern, and the second is the name. The yield of the function is
- the subpattern number, or PCRE_ERROR_NOSUBSTRING (-7) if there is no
+ the subpattern number, or PCRE_ERROR_NOSUBSTRING (-7) if there is no
subpattern of that name.
Given the number, you can extract the substring directly, or use one of
the functions described in the previous section. For convenience, there
are also two functions that do the whole job.
- Most of the arguments of pcre_copy_named_substring() and
- pcre_get_named_substring() are the same as those for the similarly
- named functions that extract by number. As these are described in the
- previous section, they are not re-described here. There are just two
+ Most of the arguments of pcre_copy_named_substring() and
+ pcre_get_named_substring() are the same as those for the similarly
+ named functions that extract by number. As these are described in the
+ previous section, they are not re-described here. There are just two
differences:
- First, instead of a substring number, a substring name is given. Sec-
+ First, instead of a substring number, a substring name is given. Sec-
ond, there is an extra argument, given at the start, which is a pointer
- to the compiled pattern. This is needed in order to gain access to the
+ to the compiled pattern. This is needed in order to gain access to the
name-to-number translation table.
- These functions call pcre_get_stringnumber(), and if it succeeds, they
- then call pcre_copy_substring() or pcre_get_substring(), as appropri-
- ate. NOTE: If PCRE_DUPNAMES is set and there are duplicate names, the
+ These functions call pcre_get_stringnumber(), and if it succeeds, they
+ then call pcre_copy_substring() or pcre_get_substring(), as appropri-
+ ate. NOTE: If PCRE_DUPNAMES is set and there are duplicate names, the
behaviour may not be what you want (see the next section).
Warning: If the pattern uses the (?| feature to set up multiple subpat-
- terns with the same number, as described in the section on duplicate
- subpattern numbers in the pcrepattern page, you cannot use names to
- distinguish the different subpatterns, because names are not included
- in the compiled code. The matching process uses only numbers. For this
- reason, the use of different names for subpatterns of the same number
+ terns with the same number, as described in the section on duplicate
+ subpattern numbers in the pcrepattern page, you cannot use names to
+ distinguish the different subpatterns, because names are not included
+ in the compiled code. The matching process uses only numbers. For this
+ reason, the use of different names for subpatterns of the same number
causes an error at compile time.
@@ -2535,51 +2572,51 @@
int pcre_get_stringtable_entries(const pcre *code,
const char *name, char **first, char **last);
- When a pattern is compiled with the PCRE_DUPNAMES option, names for
- subpatterns are not required to be unique. (Duplicate names are always
- allowed for subpatterns with the same number, created by using the (?|
- feature. Indeed, if such subpatterns are named, they are required to
+ When a pattern is compiled with the PCRE_DUPNAMES option, names for
+ subpatterns are not required to be unique. (Duplicate names are always
+ allowed for subpatterns with the same number, created by using the (?|
+ feature. Indeed, if such subpatterns are named, they are required to
use the same names.)
Normally, patterns with duplicate names are such that in any one match,
- only one of the named subpatterns participates. An example is shown in
+ only one of the named subpatterns participates. An example is shown in
the pcrepattern documentation.
- When duplicates are present, pcre_copy_named_substring() and
- pcre_get_named_substring() return the first substring corresponding to
- the given name that is set. If none are set, PCRE_ERROR_NOSUBSTRING
- (-7) is returned; no data is returned. The pcre_get_stringnumber()
- function returns one of the numbers that are associated with the name,
+ When duplicates are present, pcre_copy_named_substring() and
+ pcre_get_named_substring() return the first substring corresponding to
+ the given name that is set. If none are set, PCRE_ERROR_NOSUBSTRING
+ (-7) is returned; no data is returned. The pcre_get_stringnumber()
+ function returns one of the numbers that are associated with the name,
but it is not defined which it is.
- If you want to get full details of all captured substrings for a given
- name, you must use the pcre_get_stringtable_entries() function. The
+ If you want to get full details of all captured substrings for a given
+ name, you must use the pcre_get_stringtable_entries() function. The
first argument is the compiled pattern, and the second is the name. The
- third and fourth are pointers to variables which are updated by the
+ third and fourth are pointers to variables which are updated by the
function. After it has run, they point to the first and last entries in
- the name-to-number table for the given name. The function itself
- returns the length of each entry, or PCRE_ERROR_NOSUBSTRING (-7) if
- there are none. The format of the table is described above in the sec-
- tion entitled Information about a pattern. Given all the relevant
- entries for the name, you can extract each of their numbers, and hence
+ the name-to-number table for the given name. The function itself
+ returns the length of each entry, or PCRE_ERROR_NOSUBSTRING (-7) if
+ there are none. The format of the table is described above in the sec-
+ tion entitled Information about a pattern. Given all the relevant
+ entries for the name, you can extract each of their numbers, and hence
the captured data, if any.
FINDING ALL POSSIBLE MATCHES
- The traditional matching function uses a similar algorithm to Perl,
+ The traditional matching function uses a similar algorithm to Perl,
which stops when it finds the first match, starting at a given point in
- the subject. If you want to find all possible matches, or the longest
- possible match, consider using the alternative matching function (see
- below) instead. If you cannot use the alternative function, but still
- need to find all possible matches, you can kludge it up by making use
+ the subject. If you want to find all possible matches, or the longest
+ possible match, consider using the alternative matching function (see
+ below) instead. If you cannot use the alternative function, but still
+ need to find all possible matches, you can kludge it up by making use
of the callout facility, which is described in the pcrecallout documen-
tation.
What you have to do is to insert a callout right at the end of the pat-
- tern. When your callout function is called, extract and save the cur-
- rent matched substring. Then return 1, which forces pcre_exec() to
- backtrack and try other alternatives. Ultimately, when it runs out of
+ tern. When your callout function is called, extract and save the cur-
+ rent matched substring. Then return 1, which forces pcre_exec() to
+ backtrack and try other alternatives. Ultimately, when it runs out of
matches, pcre_exec() will yield PCRE_ERROR_NOMATCH.
@@ -2590,26 +2627,26 @@
int options, int *ovector, int ovecsize,
int *workspace, int wscount);
- The function pcre_dfa_exec() is called to match a subject string
- against a compiled pattern, using a matching algorithm that scans the
- subject string just once, and does not backtrack. This has different
- characteristics to the normal algorithm, and is not compatible with
- Perl. Some of the features of PCRE patterns are not supported. Never-
- theless, there are times when this kind of matching can be useful. For
- a discussion of the two matching algorithms, and a list of features
- that pcre_dfa_exec() does not support, see the pcrematching documenta-
+ The function pcre_dfa_exec() is called to match a subject string
+ against a compiled pattern, using a matching algorithm that scans the
+ subject string just once, and does not backtrack. This has different
+ characteristics to the normal algorithm, and is not compatible with
+ Perl. Some of the features of PCRE patterns are not supported. Never-
+ theless, there are times when this kind of matching can be useful. For
+ a discussion of the two matching algorithms, and a list of features
+ that pcre_dfa_exec() does not support, see the pcrematching documenta-
tion.
- The arguments for the pcre_dfa_exec() function are the same as for
+ The arguments for the pcre_dfa_exec() function are the same as for
pcre_exec(), plus two extras. The ovector argument is used in a differ-
- ent way, and this is described below. The other common arguments are
- used in the same way as for pcre_exec(), so their description is not
+ ent way, and this is described below. The other common arguments are
+ used in the same way as for pcre_exec(), so their description is not
repeated here.
- The two additional arguments provide workspace for the function. The
- workspace vector should contain at least 20 elements. It is used for
+ The two additional arguments provide workspace for the function. The
+ workspace vector should contain at least 20 elements. It is used for
keeping track of multiple paths through the pattern tree. More
- workspace will be needed for patterns and subjects where there are a
+ workspace will be needed for patterns and subjects where there are a
lot of potential matches.
Here is an example of a simple call to pcre_dfa_exec():
@@ -2631,53 +2668,53 @@
Option bits for pcre_dfa_exec()
- The unused bits of the options argument for pcre_dfa_exec() must be
- zero. The only bits that may be set are PCRE_ANCHORED, PCRE_NEW-
+ The unused bits of the options argument for pcre_dfa_exec() must be
+ zero. The only bits that may be set are PCRE_ANCHORED, PCRE_NEW-
LINE_xxx, PCRE_NOTBOL, PCRE_NOTEOL, PCRE_NOTEMPTY,
- PCRE_NOTEMPTY_ATSTART, PCRE_NO_UTF8_CHECK, PCRE_BSR_ANYCRLF,
- PCRE_BSR_UNICODE, PCRE_NO_START_OPTIMIZE, PCRE_PARTIAL_HARD, PCRE_PAR-
- TIAL_SOFT, PCRE_DFA_SHORTEST, and PCRE_DFA_RESTART. All but the last
- four of these are exactly the same as for pcre_exec(), so their
+ PCRE_NOTEMPTY_ATSTART, PCRE_NO_UTF8_CHECK, PCRE_BSR_ANYCRLF,
+ PCRE_BSR_UNICODE, PCRE_NO_START_OPTIMIZE, PCRE_PARTIAL_HARD, PCRE_PAR-
+ TIAL_SOFT, PCRE_DFA_SHORTEST, and PCRE_DFA_RESTART. All but the last
+ four of these are exactly the same as for pcre_exec(), so their
description is not repeated here.
PCRE_PARTIAL_HARD
PCRE_PARTIAL_SOFT
- These have the same general effect as they do for pcre_exec(), but the
- details are slightly different. When PCRE_PARTIAL_HARD is set for
- pcre_dfa_exec(), it returns PCRE_ERROR_PARTIAL if the end of the sub-
- ject is reached and there is still at least one matching possibility
+ These have the same general effect as they do for pcre_exec(), but the
+ details are slightly different. When PCRE_PARTIAL_HARD is set for
+ pcre_dfa_exec(), it returns PCRE_ERROR_PARTIAL if the end of the sub-
+ ject is reached and there is still at least one matching possibility
that requires additional characters. This happens even if some complete
matches have also been found. When PCRE_PARTIAL_SOFT is set, the return
code PCRE_ERROR_NOMATCH is converted into PCRE_ERROR_PARTIAL if the end
- of the subject is reached, there have been no complete matches, but
- there is still at least one matching possibility. The portion of the
- string that was inspected when the longest partial match was found is
+ of the subject is reached, there have been no complete matches, but
+ there is still at least one matching possibility. The portion of the
+ string that was inspected when the longest partial match was found is
set as the first matching string in both cases.
PCRE_DFA_SHORTEST
- Setting the PCRE_DFA_SHORTEST option causes the matching algorithm to
+ Setting the PCRE_DFA_SHORTEST option causes the matching algorithm to
stop as soon as it has found one match. Because of the way the alterna-
- tive algorithm works, this is necessarily the shortest possible match
+ tive algorithm works, this is necessarily the shortest possible match
at the first possible matching point in the subject string.
PCRE_DFA_RESTART
When pcre_dfa_exec() returns a partial match, it is possible to call it
- again, with additional subject characters, and have it continue with
- the same match. The PCRE_DFA_RESTART option requests this action; when
- it is set, the workspace and wscount options must reference the same
- vector as before because data about the match so far is left in them
+ again, with additional subject characters, and have it continue with
+ the same match. The PCRE_DFA_RESTART option requests this action; when
+ it is set, the workspace and wscount options must reference the same
+ vector as before because data about the match so far is left in them
after a partial match. There is more discussion of this facility in the
pcrepartial documentation.
Successful returns from pcre_dfa_exec()
- When pcre_dfa_exec() succeeds, it may have matched more than one sub-
+ When pcre_dfa_exec() succeeds, it may have matched more than one sub-
string in the subject. Note, however, that all the matches from one run
- of the function start at the same point in the subject. The shorter
- matches are all initial substrings of the longer matches. For example,
+ of the function start at the same point in the subject. The shorter
+ matches are all initial substrings of the longer matches. For example,
if the pattern
<.*>
@@ -2692,61 +2729,61 @@
<something> <something else>
<something> <something else> <something further>
- On success, the yield of the function is a number greater than zero,
- which is the number of matched substrings. The substrings themselves
- are returned in ovector. Each string uses two elements; the first is
- the offset to the start, and the second is the offset to the end. In
- fact, all the strings have the same start offset. (Space could have
- been saved by giving this only once, but it was decided to retain some
- compatibility with the way pcre_exec() returns data, even though the
+ On success, the yield of the function is a number greater than zero,
+ which is the number of matched substrings. The substrings themselves
+ are returned in ovector. Each string uses two elements; the first is
+ the offset to the start, and the second is the offset to the end. In
+ fact, all the strings have the same start offset. (Space could have
+ been saved by giving this only once, but it was decided to retain some
+ compatibility with the way pcre_exec() returns data, even though the
meaning of the strings is different.)
The strings are returned in reverse order of length; that is, the long-
- est matching string is given first. If there were too many matches to
- fit into ovector, the yield of the function is zero, and the vector is
+ est matching string is given first. If there were too many matches to
+ fit into ovector, the yield of the function is zero, and the vector is
filled with the longest matches.
Error returns from pcre_dfa_exec()
- The pcre_dfa_exec() function returns a negative number when it fails.
- Many of the errors are the same as for pcre_exec(), and these are
- described above. There are in addition the following errors that are
+ The pcre_dfa_exec() function returns a negative number when it fails.
+ Many of the errors are the same as for pcre_exec(), and these are
+ described above. There are in addition the following errors that are
specific to pcre_dfa_exec():
PCRE_ERROR_DFA_UITEM (-16)
- This return is given if pcre_dfa_exec() encounters an item in the pat-
- tern that it does not support, for instance, the use of \C or a back
+ This return is given if pcre_dfa_exec() encounters an item in the pat-
+ tern that it does not support, for instance, the use of \C or a back
reference.
PCRE_ERROR_DFA_UCOND (-17)
- This return is given if pcre_dfa_exec() encounters a condition item
- that uses a back reference for the condition, or a test for recursion
+ This return is given if pcre_dfa_exec() encounters a condition item
+ that uses a back reference for the condition, or a test for recursion
in a specific group. These are not supported.
PCRE_ERROR_DFA_UMLIMIT (-18)
- This return is given if pcre_dfa_exec() is called with an extra block
+ This return is given if pcre_dfa_exec() is called with an extra block
that contains a setting of the match_limit field. This is not supported
(it is meaningless).
PCRE_ERROR_DFA_WSSIZE (-19)
- This return is given if pcre_dfa_exec() runs out of space in the
+ This return is given if pcre_dfa_exec() runs out of space in the
workspace vector.
PCRE_ERROR_DFA_RECURSE (-20)
- When a recursive subpattern is processed, the matching function calls
- itself recursively, using private vectors for ovector and workspace.
- This error is given if the output vector is not large enough. This
+ When a recursive subpattern is processed, the matching function calls
+ itself recursively, using private vectors for ovector and workspace.
+ This error is given if the output vector is not large enough. This
should be extremely rare, as a vector of size 1000 is used.
SEE ALSO
- pcrebuild(3), pcrecallout(3), pcrecpp(3)(3), pcrematching(3), pcrepar-
+ pcrebuild(3), pcrecallout(3), pcrecpp(3)(3), pcrematching(3), pcrepar-
tial(3), pcreposix(3), pcreprecompile(3), pcresample(3), pcrestack(3).
@@ -2759,7 +2796,7 @@
REVISION
- Last updated: 15 June 2010
+ Last updated: 21 June 2010
Copyright (c) 1997-2010 University of Cambridge.
------------------------------------------------------------------------------
Modified: code/trunk/doc/pcreapi.3
===================================================================
--- code/trunk/doc/pcreapi.3 2010-06-21 14:06:54 UTC (rev 547)
+++ code/trunk/doc/pcreapi.3 2010-06-25 14:42:00 UTC (rev 548)
@@ -765,7 +765,7 @@
50 [this code is not in use]
51 octal value is greater than \e377 (not in UTF-8 mode)
52 internal error: overran compiling workspace
- 53 internal error: previously-checked referenced subpattern
+ 53 internal error: previously-checked referenced subpattern
not found
54 DEFINE group contains more than one branch
55 repeating a DEFINE group is not allowed
@@ -779,7 +779,7 @@
62 subpattern name expected
63 digit expected after (?+
64 ] is an invalid data character in JavaScript compatibility mode
- 65 different names for subpatterns of the same number are
+ 65 different names for subpatterns of the same number are
not allowed
66 (*MARK) must have an argument
67 this version of PCRE is not compiled with PCRE_UCP support
@@ -849,10 +849,10 @@
created. This speeds up finding a position in the subject at which to start
matching.
.P
-The two optimizations just described can be disabled by setting the
-PCRE_NO_START_OPTIMIZE option when calling \fBpcre_exec()\fP or
-\fBpcre_dfa_exec()\fP. You might want to do this if your pattern contains
-callouts, or make use of (*MARK), and you make use of these in cases where
+The two optimizations just described can be disabled by setting the
+PCRE_NO_START_OPTIMIZE option when calling \fBpcre_exec()\fP or
+\fBpcre_dfa_exec()\fP. You might want to do this if your pattern contains
+callouts, or make use of (*MARK), and you make use of these in cases where
matching fails. See the discussion of PCRE_NO_START_OPTIMIZE
.\" HTML <a href="#execoptions">
.\" </a>
@@ -1460,7 +1460,7 @@
for that character, and fails immediately if it cannot find it, without
actually running the main matching function. This means that a special item
such as (*COMMIT) at the start of a pattern is not considered until after a
-suitable starting point for the match has been found. When callouts or (*MARK)
+suitable starting point for the match has been found. When callouts or (*MARK)
items are in use, these "start-up" optimizations can cause them to be skipped
if the pattern is never actually used. The start-up optimizations are in effect
a pre-scan of the subject that takes place before the pattern is run.
@@ -1475,12 +1475,12 @@
(*COMMIT)ABC
.sp
When this is compiled, PCRE records the fact that a match must start with the
-character "A". Suppose the subject string is "DEFABC". The start-up
-optimization scans along the subject, finds "A" and runs the first match
+character "A". Suppose the subject string is "DEFABC". The start-up
+optimization scans along the subject, finds "A" and runs the first match
attempt from there. The (*COMMIT) item means that the pattern must match the
-current starting position, which in this case, it does. However, if the same
-match is run with PCRE_NO_START_OPTIMIZE set, the initial scan along the
-subject string does not happen. The first match attempt is run starting from
+current starting position, which in this case, it does. However, if the same
+match is run with PCRE_NO_START_OPTIMIZE set, the initial scan along the
+subject string does not happen. The first match attempt is run starting from
"D" and when this fails, (*COMMIT) prevents any further matches being tried, so
the overall result is "no match". If the pattern is studied, more start-up
optimizations may be used. For example, a minimum length for the subject may be
@@ -1488,12 +1488,12 @@
.sp
(*MARK:A)(X|Y)
.sp
-The minimum length for a match is one character. If the subject is "ABC", there
-will be attempts to match "ABC", "BC", "C", and then finally an empty string.
-If the pattern is studied, the final attempt does not take place, because PCRE
-knows that the subject is too short, and so the (*MARK) is never encountered.
-In this case, studying the pattern does not affect the overall match result,
-which is still "no match", but it does affect the auxiliary information that is
+The minimum length for a match is one character. If the subject is "ABC", there
+will be attempts to match "ABC", "BC", "C", and then finally an empty string.
+If the pattern is studied, the final attempt does not take place, because PCRE
+knows that the subject is too short, and so the (*MARK) is never encountered.
+In this case, studying the pattern does not affect the overall match result,
+which is still "no match", but it does affect the auxiliary information that is
returned.
.sp
PCRE_NO_UTF8_CHECK
