[exim] Exim cannot send mail to external email address

Góra strony
Delete this message
Reply to this message
Autor: Pamela Pomary
Data:  
Dla: exim-users
Temat: [exim] Exim cannot send mail to external email address
Hello fellow exim users,

I have exim 4.71 installed on Freebsd 8.0 with mysql support. I can send
mail locally using my mysql users. i get the following error when i try
sending mail from my box to another email address:

2010-05-20 18:28:23 1OFATk-0000Kf-Bv <= me@???
H=update.ug.edu.gh [41.204.63.199] P=smtp S=230
2010-05-20 18:28:23 1OFATk-0000Kf-Bv ** me@???: Unrouteable address
2010-05-20 18:28:23 1OFATn-0000Kh-Om <= <> R=1OFATk-0000Kf-Bv U=mailnull
P=local S=1063
2010-05-20 18:28:23 1OFATk-0000Kf-Bv Completed
2010-05-20 18:28:23 1OFATn-0000Kh-Om => me <me@???>
R=mysql_user T=mysql_delivery
2010-05-20 18:28:23 1OFATn-0000Kh-Om Completed


what have missed in /exim.conf :



# $Cambridge: exim/exim-src/src/configure.default,v 1.1 2004/10/07
10:39:01 ph10 Exp $

######################################################################
#                  Runtime configuration file for Exim               #
######################################################################



# This is a default configuration file which will operate correctly in
# uncomplicated installations. Please see the manual for a complete list
# of all the runtime configuration options that can be included in a
# configuration file. There are many more than are mentioned here. The
# manual is in the file doc/spec.txt in the Exim distribution as a plain
# ASCII file. Other formats (PostScript, Texinfo, HTML, PDF) are available
# from the Exim ftp sites. The manual is also online at the Exim web sites.


# This file is divided into several parts, all but the first of which are
# headed by a line starting with the word "begin". Only those parts that
# are required need to be present. Blank lines, and lines starting with #
# are ignored.


########### IMPORTANT ########## IMPORTANT ########### IMPORTANT ###########
#                                                                          #
# Whenever you change Exim's configuration file, you *must* remember to    #
# HUP the Exim daemon, because it will not pick up the new configuration   #
# until you do. However, any other Exim processes that are started, for    #
# example, a process started by an MUA in order to send a message, will    #
# see the new configuration as soon as it is in place.                     #
#                                                                          #
# You do not need to HUP the daemon for changes in auxiliary files that    #
# are referenced from this file. They are read every time they are used.   #
#                                                                          #
# It is usually a good idea to test a new configuration for syntactic      #
# correctness before installing it (for example, by running the command    #
# "exim -C /config/file.new -bV").                                         #
#                                                                          #
########### IMPORTANT ########## IMPORTANT ########### IMPORTANT ###########




######################################################################
#                    MAIN CONFIGURATION SETTINGS                     #
######################################################################
hide mysql_servers = localhost/<database>/<user>/<password>


# Specify your host's canonical name here. This should normally be the fully
# qualified "official" name of your host. If this option is not set, the
# uname() function is called to obtain the name. In many cases this does
# the right thing and you need not set anything explicitly.

# primary_hostname =


# The next three settings create two lists of tables and one list of hosts.
# These lists are referred to later in this configuration using the syntax
# +local_tables, +relay_to_tables, and +relay_from_hosts, respectively. They
# are all colon-separated lists:

#tablelist local_tables = @
tablelist local_tables = @ :localhost : ${lookup mysql {SELECT table FROM
tables \
                WHERE table="${quote_mysql:${table}}" }}
tablelist relay_to_tables = ug.edu.gh
hostlist   relay_from_hosts = 127.0.0.1 : 192.168.0.0/16 : 41.204.63.199 :
82.206.239.128/25




# Most straightforward access control requirements can be obtained by
# appropriate settings of the above options. In more complicated
situations, you
# may need to modify the Access Control List (ACL) which appears later in
this
# file.

# The first setting specifies your local tables, for example:
#
# tablelist local_tables = my.first.table : my.second.table
#
# You can use "@" to mean "the name of the local host", as in the default
# setting above. This is the name that is specified by primary_hostname,
# as specified above (or defaulted). If you do not want to do any local
# deliveries, remove the "@" from the setting above. If you want to accept
mail
# addressed to your host's literal IP address, for example, mail addressed to
# "user@???", you can add "@[]" as an item in the local tables
# list. You also need to uncomment "allow_table_literals" below. This is not
# recommended for today's Internet.

# The second setting specifies tables for which your host is an incoming
relay.
# If you are not doing any relaying, you should leave the list empty.
However,
# if your host is an MX backup or gateway of some kind for some tables, you
# must set relay_to_tables to match those tables. For example:
#
# tablelist relay_to_tables = *.myco.com : my.friend.org
#
# This will allow any host to relay through your host to those tables.
# See the section of the manual entitled "Control of relaying" for more
# information.

# The third setting specifies hosts that can use your host as an outgoing
relay
# to any other host on the Internet. Such a setting commonly refers to a
# complete local network as well as the localhost. For example:
#
#hostlist relay_from_hosts = 127.0.0.1 : 192.168.0.0/16 : 82.206.239.244/32
#
# The "/16" is a bit mask (CIDR notation), not a number of hosts. Note
that you
# have to include 127.0.0.1 if you want to allow processes on your host to
send
# SMTP mail by using the loopback address. A number of MUAs use this
method of
# sending mail.


# All three of these lists may contain many different kinds of item,
including
# wildcarded names, regular expressions, and file lookups. See the reference
# manual for details. The lists above are used in the access control list for
# incoming messages. The name of this ACL is defined here:

acl_smtp_rcpt = acl_check_rcpt
acl_smtp_data = acl_check_data
acl_not_smtp = acl_check_data
# You should not change that setting until you understand how ACLs work.


# Specify the table you want to be added to all unqualified addresses
# here. An unqualified address is one that does not contain an "@" character
# followed by a table. For example, "caesar@???" is a fully
qualified
# address, but the string "caesar" (i.e. just a login name) is an unqualified
# email address. Unqualified addresses are accepted only from local
callers by
# default. See the recipient_unqualified_hosts option if you want to permit
# unqualified addresses from remote sources. If this option is not set, the
# primary_hostname value is used for qualification.

# qualify_table =


# If you want unqualified recipient addresses to be qualified with a
different
# table to unqualified sender addresses, specify the recipient table here.
# If this option is not set, the qualify_table value is used.


# qualify_recipient =


# The following line must be uncommented if you want Exim to recognize
# addresses of the form "user@???" that is, with a "table literal"
# (an IP address) instead of a named table. The RFCs still require this form,
# but it makes little sense to permit mail to be sent to specific hosts by
# their IP address in the modern Internet. This ancient format has been used
# by those seeking to abuse hosts by using them for unwanted relaying. If you
# really do want to support table literals, uncomment the following line, and
# see also the "table_literal" router below.

# allow_table_literals


# No deliveries will ever be run under the uids of these users (a colon-
# separated list). An attempt to do so causes a panic error to be logged, and
# the delivery to be deferred. This is a paranoic safety catch. There is an
# even stronger safety catch in the form of the FIXED_NEVER_USERS setting
# in the configuration for building Exim. The list of users that it specifies
# is built into the binary, and cannot be changed. The option below just adds
# additional users to the list. The default for FIXED_NEVER_USERS is "root",
# but just to be absolutely sure, the default here is also "root".

# Note that the default setting means you cannot deliver mail addressed to
root
# as if it were a normal user. This isn't usually a problem, as most sites
have
# an alias for root that redirects such mail to a human administrator.

never_users = root
#exim_group = mail
#exim_user = ematogo


# The setting below causes Exim to do a reverse DNS lookup on all incoming
# IP calls, in order to get the true host name. If you feel this is too
# expensive, you can specify the networks for which a lookup is done, or
# remove the setting entirely.

host_lookup = *


# The settings below, which are actually the same as the defaults in the
# code, cause Exim to make RFC 1413 (ident) callbacks for all incoming SMTP
# calls. You can limit the hosts to which these calls are made, and/or change
# the timeout that is used. If you set the timeout to zero, all RFC 1413
calls
# are disabled. RFC 1413 calls are cheap and can provide useful information
# for tracing problem messages, but some hosts and firewalls have problems
# with them. This can result in a timeout instead of an immediate refused
# connection, leading to delays on starting up an SMTP session.

rfc1413_hosts = *
rfc1413_query_timeout = 30s


# By default, Exim expects all envelope addresses to be fully qualified, that
# is, they must contain both a local part and a table. If you want to accept
# unqualified addresses (just a local part) from certain hosts, you can
specify
# these hosts by setting one or both of
#
# sender_unqualified_hosts =
# recipient_unqualified_hosts =
#
# to control sender and recipient addresses, respectively. When this is done,
# unqualified addresses are qualified using the settings of qualify_table
# and/or qualify_recipient (see above).


# If you want Exim to support the "percent hack" for certain tables,
# uncomment the following line and provide a list of tables. The "percent
# hack" is the feature by which mail addressed to x%y@z (where z is one of
# the tables listed) is locally rerouted to x@y and sent on. If z is not one
# of the "percent hack" tables, x%y is treated as an ordinary local part.
This
# hack is rarely needed nowadays; you should not enable it unless you are
sure
# that you really need it.
#
# percent_hack_tables =
#
# As well as setting this option you will also need to remove the test
# for local parts containing % in the ACL definition below.


# When Exim can neither deliver a message nor return it to sender, it
"freezes"
# the delivery error message (aka "bounce message"). There are also other
# circumstances in which messages get frozen. They will stay on the queue for
# ever unless one of the following options is set.

# This option unfreezes frozen bounce messages after two days, tries
# once more to deliver them, and ignores any delivery failures.

ignore_bounce_errors_after = 2d

# This option cancels (removes) frozen messages that are older than a week.

timeout_frozen_after = 7d



######################################################################
#                       ACL CONFIGURATION                            #
#         Specifies access control lists for incoming SMTP mail      #
######################################################################


#av_scanner = clamd:/var/run/clamav/clamd.sock
av_scanner = clamd:127.0.0.1 3310
begin acl
acl_check_data:
  #deny  message = This message contains \
   #               a virus ($malware_name).
    #    malware = *
 # warn    spam    = nobody
 #       message = X-is-spam: over spam threshold
 # warn  message = X-Spam_score: $spam_score\n\
    #      X-Spam_score_int: $spam_score_int\n\
        #  X-Spam_bar: $spam_bar\n\
         # X-Spam_report: $spam_report
  accept
# This access control list is used for every RCPT command in an incoming
# SMTP message. The tests are run in order until the address is either
# accepted or denied.


acl_check_rcpt:

# Accept if the source is local SMTP (i.e. not over TCP/IP). We do this by
# testing for an empty sending host field.




  accept  hosts = :
         # control = dkim_disable_verify



#############################################################################
# The following section of the ACL is concerned with local parts that
contain
# @ or % or ! or / or | or dots in unusual places.
#
# The characters other than dots are rarely found in genuine local
parts, but
# are often tried by people looking to circumvent relaying restrictions.
# Therefore, although they are valid in local parts, these rules lock them
# out, as a precaution.
#
# Empty components (two dots in a row) are not valid in RFC 2822, but Exim
# allows them because they have been encountered. (Consider local parts
# constructed as "firstinitial.secondinitial.familyname" when applied to
# someone like me, who has no second initial.) However, a local part
starting
# with a dot or containing /../ can cause trouble if it is used as part
of a
# file name (e.g. for a mailing list). This is also true for local parts
that
# contain slashes. A pipe symbol can also be troublesome if the local
part is
# incorporated unthinkingly into a shell command line.
#
# Two different rules are used. The first one is stricter, and is
applied to
# messages that are addressed to one of the local tables handled by this
# host. It blocks local parts that begin with a dot or contain @ % ! /
or |.
# If you have local accounts that include these characters, you will
have to
# modify this rule.

  deny    message       = Restricted characters in address
          tables       = +local_tables
          local_parts   = ^[.] : ^.*[@%!/|]


# The second rule applies to all other tables, and is less strict. This
# allows your own users to send outgoing messages to sites that use slashes
# and vertical bars in their local parts. It blocks local parts that begin
# with a dot, slash, or vertical bar, but allows these characters within
the
# local part. However, the sequence /../ is barred. The use of @ % and ! is
# blocked, as before. The motivation here is to prevent your users (or
# your users' viruses) from mounting certain kinds of attack on remote
sites.

  deny    message       = Restricted characters in address
          tables       = !+local_tables
          local_parts   = ^[./|] : ^.*[@%!] : ^.*/\\.\\./
  #############################################################################


# Accept mail to postmaster in any local table, regardless of the source,
# and without verifying the sender.

  accept  local_parts   = postmaster
          tables       = +local_tables


# Deny unless the sender address can be verified.

#  require verify        = sender



  #############################################################################
  # There are no checks on DNS "black" lists because the tables that contain
  # these lists are changing all the time. However, here are two examples of
  # how you could get Exim to perform a DNS black list lookup at this point.
  # The first one denies, while the second just warns.
  #
  # deny    message       = rejected because $sender_host_address is in a
black list at $dnslist_table\n$dnslist_text
  #         dnslists      = black.list.example
  #
  # warn    message       = X-Warning: $sender_host_address is in a black
list at $dnslist_table
  #         log_message   = found in $dnslist_table
  #         dnslists      = black.list.example
  #############################################################################


# Accept if the address is in a local table, but only if the recipient can
# be verified. Otherwise deny. The "endpass" line is the border between
# passing on to the next ACL statement (if tests above it fail) or denying
# access (if tests below it fail).

  accept  tables       = +local_tables
          endpass
         # verify        = recipient























# Accept if the address is in a table for which we are relaying, but again,
# only if the recipient can be verified.

  accept  tables       = +relay_to_tables
          endpass
         # verify        = recipient


# If control reaches this point, the table is neither in +local_tables
# nor in +relay_to_tables.

# Accept if the message comes from one of the hosts for which we are an
# outgoing relay. Recipient verification is omitted here, because in many
# cases the clients are dumb MUAs that don't cope well with SMTP error
# responses. If you are actually relaying out from MTAs, you should
probably
# add recipient verification here.

  accept  hosts         = +relay_from_hosts


# Accept if the message arrived over an authenticated connection, from
# any host. Again, these messages are usually from MUAs, so recipient
# verification is omitted.

  accept  authenticated = *
          control       = submission
          #control       = dkim_disable_verify
  # Reaching the end of the ACL causes a "deny", but we might as well give
  # an explicit message.


  deny    message       = relay not permitted




######################################################################
#                      ROUTERS CONFIGURATION                         #
#               Specifies how addresses are handled                  #
######################################################################
#     THE ORDER IN WHICH THE ROUTERS ARE DEFINED IS IMPORTANT!       #
# An address is passed to each router in turn until it is accepted.  #
######################################################################


begin routers

# This router routes to remote hosts over SMTP by explicit IP address,
# when an email address is given in "table literal" form, for example,
# <user@???>. The RFCs require this facility. However, it is
# little-known these days, and has been exploited by evil people seeking
# to abuse SMTP relays. Consequently it is commented out in the default
# configuration. If you uncomment this router, you also need to uncomment
# allow_table_literals above, so that Exim can recognize the syntax of
# table literal addresses.

# table_literal:
# driver = ipliteral
# tables = ! +local_tables
# transport = remote_smtp


# This router routes addresses that are not in local tables by doing a DNS
# lookup on the table name. Any table that resolves to 0.0.0.0 or to a
# loopback interface address (127.0.0.0/8) is treated as if it had no DNS
# entry. Note that 0.0.0.0 is the same as 0.0.0.0/32, which is commonly
treated
# as the local host inside the network stack. It is not 0.0.0.0/0, the
default
# route. If the DNS lookup fails, no further routers are tried because of
# the no_more setting, and consequently the address is unrouteable.

dnslookup:
driver = dnslookup
tables = ! +local_tables
transport = remote_smtp
ignore_target_hosts = 0.0.0.0 : 127.0.0.0/8
no_more

mysql_sys_aliases:
  driver = redirect
  allow_fail
  allow_defer
  directory_transport = address_file
  file_transport = address_file
  data = ${lookup mysql{SELECT dest FROM aliases \
            WHERE email='${local_part}@${table}' AND \
            type="system"}}


mysql_aliases:
  driver = redirect
  allow_fail
  allow_defer
  directory_transport = address_file
  file_transport = address_file
  data = ${lookup mysql{ SELECT dest FROM aliases \
            WHERE email='${local_part}@${table}' AND \
            type="site"}}


# The remaining routers handle addresses in the local table(s).


# This router handles aliasing using a linearly searched alias file with the
# name /etc/aliases. When this configuration is installed automatically,
# the name gets inserted into this file from whatever is set in Exim's
# build-time configuration. The default path is the traditional /etc/aliases.
# If you install this configuration by hand, you need to specify the correct
# path in the "data" setting below.
#
##### NB You must ensure that the alias file exists. It used to be the case
##### NB that every Unix had that file, because it was the Sendmail default.
##### NB These days, there are systems that don't have it. Your aliases
##### NB file should at least contain an alias for "postmaster".
#
# If any of your aliases expand to pipes or files, you will need to set
# up a user and a group for these deliveries to run under. You can do
# this by uncommenting the "user" option below (changing the user name
# as appropriate) and adding a "group" option if necessary. Alternatively,
you
# can specify "user" on the transports that are used. Note that the
transports
# listed below are the same as are used for .forward files; you might want
# to set up different ones for pipe and file deliveries from aliases.

#system_aliases:
# driver = redirect
# allow_fail
# allow_defer
# data = ${lookup{$local_part}lsearch{/etc/aliases}}
## user = exim
# file_transport = address_file
# pipe_transport = address_pipe


# This router handles forwarding using traditional .forward files in users'
# home directories. If you want it also to allow mail filtering when a
forward
# file starts with the string "# Exim filter" or "# Sieve filter", uncomment
# the "allow_filter" option.

# If you want this router to treat local parts with suffixes introduced by
"-"
# or "+" characters as if the suffixes did not exist, uncomment the two
local_
# part_suffix options. Then, for example, xxxx-foo@??? will be treated
# in the same way as xxxx@??? by this router. You probably want to
make
# the same change to the localuser router.

# The no_verify setting means that this router is skipped when Exim is
# verifying addresses. Similarly, no_expn means that this router is
skipped if
# Exim is processing an EXPN command.

# The check_ancestor option means that if the forward file generates an
# address that is an ancestor of the current one, the current one gets
# passed on instead. This covers the case where A is aliased to B and B
# has a .forward file pointing to A.

# The three transports specified at the end are those that are used when
# forwarding generates a direct delivery to a file, or to a pipe, or sets
# up an auto-reply, respectively.

#userforward:
# driver = redirect
# check_local_user
## local_part_suffix = +* : -*
## local_part_suffix_optional
# file = $home/.forward
## allow_filter
# no_verify
# no_expn
# check_ancestor
# file_transport = address_file
# pipe_transport = address_pipe
# reply_transport = address_reply


# This router matches local user mailboxes. If the router fails, the error
# message is "Unknown user".

# If you want this router to treat local parts with suffixes introduced by
"-"
# or "+" characters as if the suffixes did not exist, uncomment the two
local_
# part_suffix options. Then, for example, xxxx-foo@??? will be treated
# in the same way as xxxx@??? by this router.

#localuser:
# driver = accept
# check_local_user
## local_part_suffix = +* : -*
## local_part_suffix_optional
# transport = local_delivery
# cannot_route_message = Unknown user


mysql_user:
  driver = accept
  condition = ${lookup mysql {SELECT home FROM table \
        WHERE email='${local_part}@${table}'}}
  retry_use_local_part
  transport=mysql_delivery
######################################################################
#                      TRANSPORTS CONFIGURATION                      #
######################################################################
#                       ORDER DOES NOT MATTER                        #
#     Only one appropriate transport is called for each delivery.    #
######################################################################


# A transport is used only when referenced from a router that successfully
# handles an address.

begin transports


# This transport is used for delivering messages over SMTP connections.

remote_smtp:
driver = smtp


# This transport is used for local delivery to user mailboxes in traditional
# BSD mailbox format. By default it will be run under the uid and gid of the
# local user, and requires the sticky bit to be set on the /var/mail
directory.
# Some systems use the alternative approach of running mail deliveries
under a
# particular group instead of using the sticky bit. The commented options
below
# show how this can be done.

#local_delivery:
# driver = appendfile
# file = /var/mail/$local_part
# delivery_date_add
# envelope_to_add
# return_path_add
## group = mail
## mode = 0660


mysql_delivery:
  driver = appendfile
  maildir_format
  maildir_use_size_file
  delivery_date_add
  envelope_to_add
  return_path_add
  directory = \
    ${lookup mysql{SELECT maildir FROM table \
      WHERE email='${local_part}@${table}'}}
  user = \
    ${lookup mysql{SELECT uid FROM table \
      WHERE email='${local_part}@${table}'}}
  group = \
    ${lookup mysql{SELECT gid FROM table \
      WHERE email='${local_part}@${table}'}}
  maildir_tag = ,S=$message_size
  quota_size_regex = ,S=(\d+)
  quota = \
    ${lookup mysql{SELECT quota FROM table \
      WHERE email='${local_part}@${table}'}{$value}{5M}}
  quota_warn_threshold = 90%


# This transport is used for handling pipe deliveries generated by alias or
# .forward files. If the pipe generates any standard output, it is returned
# to the sender of the message as a delivery error. Set return_fail_output
# instead of return_output if you want this to happen only when the pipe
fails
# to complete normally. You can set different transports for aliases and
# forwards if you want to - see the references to address_pipe in the routers
# section above.

address_pipe:
driver = pipe
return_output


# This transport is used for handling deliveries directly to files that are
# generated by aliasing or forwarding.

address_file:
driver = appendfile
delivery_date_add
envelope_to_add
return_path_add


# This transport is used for handling autoreplies generated by the filtering
# option of the userforward router.

address_reply:
driver = autoreply



######################################################################
#                      RETRY CONFIGURATION                           #
######################################################################


begin retry

# This single retry rule applies to all tables and all errors. It specifies
# retries every 15 minutes for 2 hours, then increasing retry intervals,
# starting at 1 hour and increasing each time by a factor of 1.5, up to 16
# hours, then retries every 6 hours until 4 days have passed since the first
# failed delivery.

# Address or table    Error       Retries
# -----------------    -----       -------


*                      *           F,2h,15m; G,16h,1h,1.5; F,4d,6h




######################################################################
#                      REWRITE CONFIGURATION                         #
######################################################################


# There are no rewriting specifications in this default configuration file.

begin rewrite



######################################################################
#                   AUTHENTICATION CONFIGURATION                     #
######################################################################


# There are no authenticator specifications in this default configuration
file.

begin authenticators



######################################################################
#                   CONFIGURATION FOR local_scan()                   #
######################################################################


# If you have built Exim to include a local_scan() function that contains
# tables for private options, you can define those options here. Remember to
# uncomment the "begin" line. It is commented by default because it provokes
# an error with Exim binaries that are not built with LOCAL_SCAN_HAS_OPTIONS
# set in the Local/Makefile.

# begin local_scan


# End of Exim configuration file




Thank You



--
Pamela Pomary
ICT Assistant (Network Administration)
ICT Directorate
University of Ghana
Tel:+233 244 994 020
g-mail:ppomary@???
yahoo-mail: mawua2005@???
skype:ppomary