Hi Ted,
thanks for your response. You are right was my fault, no excat conf or
debug output. Here is my used confi - file (cutted the retry config part)
primary_hostname = domain.dom
local_interfaces = <; 0.0.0.0.25 ; 127.0.0.1.10025
smtp_accept_queue_per_connection = 100
smtp_accept_max = 100
domainlist local_domains = dbm;/usr/local/exim/etc/localdomains.db
domainlist relay_to_domains = dbm;/usr/local/exim/etc/relaydomains.db
hostlist relay_from_hosts = 127.0.0.1 :
net-dbm;/usr/local/exim/etc/relayfromhosts.db
domainlist spamcheck_domains = dbm;/usr/local/exim/etc/spamcheckdomains.db
domainlist viruscheck_domains =
dbm;/usr/local/exim/etc/viruscheckdomains.db
domainlist route_domains = dbm;/usr/local/exim/etc/routedomains.db
acl_smtp_rcpt = acl_check_rcpt;
acl_smtp_data = acl_check_data;
qualify_domain = domain.dom
never_users = root
host_lookup = *
rfc1413_hosts = *
rfc1413_query_timeout = 1s
ignore_bounce_errors_after = 2d
timeout_frozen_after = 3d
######################################################################
# ACL CONFIGURATION #
# Specifies access control lists for incoming SMTP mail #
######################################################################
begin acl
# This access control list is used for every RCPT command in an incoming
# SMTP message. The tests are run in order until the address is either
# accepted or denied.
acl_check_rcpt:
accept hosts = :
deny message = Restricted characters in address
domains = +local_domains
local_parts = ^[.] : ^.*[@%!/|]
deny message = Restricted characters in address
domains = !+local_domains
local_parts = ^[./|] : ^.*[@%!] : ^.*/\\.\\./
accept local_parts = postmaster.
domains = +local_domains%!]
deny message = rejected because $sender_host_address is in a
black list at $dnslist_domain\n$dnslist_text
dnslists =
dnsbl.njabl.org:sbl.spamhaus.org:bl.spamcop.net:cbl.abuseat.org
require verify = sender
accept hosts = +relay_from_hosts
control = submission
accept authenticated = *
control = submission
accept domains = +local_domains
endpass
verify = recipient
accept domains = +route_domains
endpass
message = Recipient could not be verified
verify = recipient/callout=10s
accept domains = +relay_to_domains
endpass
verify = recipient
require message = relay not permitted
domains = +local_domains : +relay_to_domains
require verify = recipient
deny message = relay not permitted
acl_check_data:
accept
######################################################################
# ROUTERS CONFIGURATION #
# Specifies how addresses are handled #
######################################################################
# THE ORDER IN WHICH THE ROUTERS ARE DEFINED IS IMPORTANT! #
# An address is passed to each router in turn until it is accepted. #
######################################################################
begin routers
amavis:
no_verify
driver = manualroute
# if scanning incoming mails, uncomment the following line and
condition = "${if or {{eq {$interface_port}{10025}} \
{eq {$received_protocol}{spam-scanned}} \
{eq {$sender_address}{}} \
}{0}{1}}"
# change local_domains accordingly
# domains = +local_domains
domains = +viruscheck_domains
transport = amavis
route_list = "* localhost byname"
self = send
#SpamAssassin
spamcheck_router:
no_verify
#check_local_user
# When to scan a message :
# - it isn't already flagged as spam
# - it isn't already scanned
domains = +spamcheck_domains
condition = "${if and { {!def:h_X-Spam-Flag:} {!eq
{$received_protocol}{spam-scanned}}} {1}{0}}"
transport = spamcheck
driver = accept
redirect_user:
driver = redirect
data = ${lookup {$local_part@$domain} dbm
{/usr/local/exim/etc/redirect.db}}
redirect_domains:
driver = redirect
data = ${lookup {$domain} dbm{/usr/local/exim/etc/redirect.db}}
manualrouting:
driver = manualroute
transport = remote_smtp
route_data = ${lookup {$domain} dbm
{/usr/local/exim/etc/routedomains.db}}}}
dnslookup:
driver = dnslookup
domains = ! +local_domains
transport = remote_smtp
ignore_target_hosts = 0.0.0.0 : 127.0.0.0/8
no_more
system_aliases:
driver = redirect
allow_fail
allow_defer
data = ${lookup{$local_part}lsearch{/etc/aliases}}
# user = exim
file_transport = address_file
pipe_transport = address_pipe
userforward:
driver = redirect
check_local_user
# local_part_suffix = +* : -*
# local_part_suffix_optional
file = $home/.forward
# allow_filter
no_verify
no_expn
check_ancestor
file_transport = address_file
pipe_transport = address_pipe
reply_transport = address_reply
localuser:
driver = accept
check_local_user
# local_part_suffix = +* : -*
# local_part_suffix_optional
transport = local_delivery
cannot_route_message = Unknown user
######################################################################
# TRANSPORTS CONFIGURATION #
######################################################################
# ORDER DOES NOT MATTER #
# Only one appropriate transport is called for each delivery. #
######################################################################
begin transports
remote_smtp:
driver = smtp
local_delivery:
driver = appendfile
file = /var/mail/$local_part
delivery_date_add
envelope_to_add
return_path_add
# group = mail
# mode = 0660
address_pipe:
driver = pipe
return_output
address_file:
driver = appendfile
delivery_date_add
envelope_to_add
return_path_add
address_reply:
driver = autoreply
#SpamAssassin
spamcheck:
driver = pipe
command = /usr/local/exim/bin/exim -oMr spam-scanned -bS
use_bsmtp = true
# transport_filter = /usr/local/spamassassin/bin/spamc
transport_filter = /usr/bin/spamc
home_directory = "/tmp"
current_directory = "/tmp"
# must use a privileged user to set $received_protocol on the way back
in!}
user = exim
group = exim
log_output = true
return_fail_output = true
return_path_add = false
message_prefix =
message_suffix =
amavis:
driver = smtp
port = 10024
allow_localhost
Hope this helps.
