[exim] how to stop exim from reverse lookup check for truste…

Startseite
Nachricht löschen
Nachricht beantworten
Autor: KHALID SHAWKAT
Datum:  
To: exim-users
Betreff: [exim] how to stop exim from reverse lookup check for trusted IPs...
Hello Guys,


My client has been getting the following message in OE, while sending
email:

---------------
The message could not be sent because one of the recipients was rejected
by the server. The rejected e-mail address was 'sales@???'. Subject
'hi', Account: 'SALES', Server: 'mail.example.net', Protocol: SMTP, Server
Response: '550 Administrative prohibition', Port: 25, Secure(SSL): No,
Server Error: 550, Error Number: 0x800CCC79"
---------------

The log shows this:

---------------
2005-07-03 23:10:16 no IP address found for host
adsl-156-1-178.bna.bellsouth.net (during SMTP connection from (EAGLE)
[70.156.1.178])
2005-07-03 23:10:16 H=(FALCON) [70.156.1.178] F=<sales@???>
rejected RCPT <sales@???>: host lookup failed for reverse lookup
check (70.156.1.178 does not match any IP address for
adsl-156-1-178.bna.bellsouth.net)
---------------

Another client is getting the same error '550 Administrative prohibition'
and his log shows this:

---------------
2005-07-05 12:50:56 H=(notebook-pc.2nd_example.com) [202.52.215.125]
F=<sales@2nd_example.com> rejected RCPT <info@customers_email.com>: host
lookup failed for reverse lookup check (failed to find host name from IP
address)
---------------

I checked both of the clients static IPs - assigned by their ISPs. The
first one has no 'A' record
defined in the PTR and the second one has no PTR. I think that is the
reason why they can not send
any emails. I'm using cPanel 10.2.0-C131 and CentOS 3.5 with EXIM 4.51 -
which is configured with
DCC, SPAMASSASSIN w/SARE (from http://rulesemporium.com/) & CLAMAV.

This issue can be resolved by un-checking the option "Verify the existence
of email senders" from
WHM by selecting the options of "Exim Configuration Editor".

I tried the following setup in - '/etc/exim.conf' and restarted exim:

     hostlist relay_hosts = lsearch;/etc/relayhosts : \
       localhost : 70.156.1.178 : 202.52.215.125


It didn't work. I was wondering if there are any other solutions to fix
this issue other than
un-checking the option: "Verify the existence of email senders". Or how can
I stop EXIM from checking
reverse IP lookup for these two IPs? My exim configuration is listed below
this email.

Thank you in advance for your cooperation...




#################################################
#                                           start (exim.conf) 
#
#################################################


#!!# cPanel Exim 4 Config

av_scanner = clamd:/var/run/clamav/clamd

#############################
# RBL FIRST PART START
#############################

domainlist rbl_bypass = lsearch;/etc/rblbypass
domainlist rbl_domain_blacklist = lsearch;/etc/rbldomblklist

hostlist rbl_whitelist = lsearch;/etc/relayhosts :
partial-lsearch;/etc/rblwhtlist

hostlist rbl_ip_whitelist = net-iplsearch;/etc/rblipwhtlist
hostlist rbl_relay_hosts = net-iplsearch;/etc/relayhosts

addresslist rbl_email_bypass = lsearch*@;/etc/rblembypass

#############################
# RBL FIRST PART END
#############################

local_from_check = true

#!!# These options specify the Access Control Lists (ACLs) that
#!!# are used for incoming SMTP messages - after the RCPT and DATA
#!!# commands, respectively.

acl_smtp_rcpt = check_recipient
acl_smtp_data = check_message

#!!# This setting defines a named domain list called
#!!# local_domains, created from the old options that
#!!# referred to local domains. It will be referenced
#!!# later on by the syntax "+local_domains".
#!!# Other domain and host lists may follow.

domainlist local_domains = lsearch;/etc/localdomains

domainlist relay_domains = lsearch;/etc/localdomains : \
    lsearch;/etc/secondarymx
hostlist relay_hosts = lsearch;/etc/relayhosts : \
    localhost
hostlist auth_relay_hosts = *


######################################################################
#                  Runtime configuration file for Exim               #
######################################################################



# This is a default configuration file which will operate correctly in
# uncomplicated installations. Please see the manual for a complete list
# of all the runtime configuration options that can be included in a
# configuration file. There are many more than are mentioned here. The
# manual is in the file doc/spec.txt in the Exim distribution as a plain
# ASCII file. Other formats (PostScript, Texinfo, HTML) are available from
# the Exim ftp sites. The manual is also online via the Exim web sites.


# This file is divided into several parts, all but the last of which are
# terminated by a line containing the word "end". The parts must appear
# in the correct order, and all must be present (even if some of them are
# in fact empty). Blank lines, and lines starting with # are ignored.



######################################################################
#                    MAIN CONFIGURATION SETTINGS                     #
######################################################################


perl_startup = do '/etc/exim.pl'

#dns_retry = 1
#dns_retrans = 1s

# Specify your host's canonical name here. This should normally be the
fully
# qualified "official" name of your host. If this option is not set, the
# uname() function is called to obtain the name.

smtp_banner = "${primary_hostname} ESMTP Exim ${version_number} \
\#${compile_number} ${tod_full} \n\
We do not authorize the use of this system to transport unsolicited, \n\
and/or bulk e-mail."


#nobody as the sender seems to annoy people
untrusted_set_sender = *

rfc1413_query_timeout = 2s

split_spool_directory = yes

smtp_connect_backlog = 50
smtp_accept_max = 100

# primary_hostname =
deliver_queue_load_max = 3
auto_thaw = 1h

# Specify the domain you want to be added to all unqualified addresses
# here. An unqualified address is one that does not contain an "@"
character
# followed by a domain. For example, "caesar@???" is a fully qualified
# address, but the string "caesar" (i.e. just a login name) is an
unqualified
# email address. Unqualified addresses are accepted only from local callers
by
# default. See the receiver_unqualified_{hosts,nets} options if you want
# to permit unqualified addresses from remote sources. If this option is
# not set, the primary_hostname value is used for qualification.

# qualify_domain =


# If you want unqualified recipient addresses to be qualified with a
different
# domain to unqualified sender addresses, specify the recipient domain
here.
# If this option is not set, the qualify_domain value is used.

# qualify_recipient =


# Specify your local domains as a colon-separated list here. If this option
# is not set (i.e. not mentioned in the configuration file), the
# qualify_recipient value is used as the only local domain. If you do not
want
# to do any local deliveries, uncomment the following line, but do not
supply
# any data for it. This sets local_domains to an empty string, which is not
# the same as not mentioning it at all. An empty string specifies that
there
# are no local domains; not setting it at all causes the default value (the
# setting of qualify_recipient) to be used.



#!!# message_filter renamed system_filter
system_filter = /etc/antivirus.exim
message_body_visible = 5000






# If you want to accept mail addressed to your host's literal IP address,
for
# example, mail addressed to "user@???", then uncomment the
# following line, or supply the literal domain(s) as part of
"local_domains"
# above.

# local_domains_include_host_literals


# No local deliveries will ever be run under the uids of these users (a
colon-
# separated list). An attempt to do so gets changed so that it runs under
the
# uid of "nobody" instead. This is a paranoic safety catch. Note the
default
# setting means you cannot deliver mail addressed to root as if it were a
# normal user. This isn't usually a problem, as most sites have an alias
for
# root that redirects such mail to a human administrator.

never_users = root


# The use of your host as a mail relay by any host, including the local
host
# calling its own SMTP port, is locked out by default. If you want to
permit
# relaying from the local host, you should set
#
# host_accept_relay = localhost
#
# If you want to permit relaying through your host from certain hosts or IP
# networks, you need to set the option appropriately, for example
#
#
#
# If you are an MX backup or gateway of some kind for some domains, you
must
# set relay_domains to match those domains. This will allow any host to
# relay through your host to those domains.
#
# See the section of the manual entitled "Control of relaying" for more
# information.

# The setting below causes Exim to do a reverse DNS lookup on all incoming
# IP calls, in order to get the true host name. If you feel this is too
# expensive, you can specify the networks for which a lookup is done, or
# remove the setting entirely.

#host_lookup = 0.0.0.0/0


# By default, Exim expects all envelope addresses to be fully qualified,
that
# is, they must contain both a local part and a domain. If you want to
accept
# unqualified addresses (just a local part) from certain hosts, you can
specify
# these hosts by setting one or both of
#
# receiver_unqualified_hosts =
# sender_unqualified_hosts =
#
# to control sender and receiver addresses, respectively. When this is
done,
# unqualified addresses are qualified using the settings of qualify_domain
# and/or qualify_recipient (see above).


# Exim contains support for the Realtime Blocking List (RBL) that is being
# maintained as part of the DNS. See http://maps.vix.com/rbl/ for
background.
# Uncommenting the first line below will make Exim reject mail from any
# host whose IP address is blacklisted in the RBL at maps.vix.com. Some
# others have followed the RBL lead and have produced other lists: DUL is
# a list of dial-up addresses, and ORBS is a list of open relay systems.
The
# second line below checks all three lists.

# rbl_domains = rbl.maps.vix.com
# rbl_domains = rbl.maps.vix.com


# If you want Exim to support the "percent hack" for all your local
domains,
# uncomment the following line. This is the feature by which mail addressed
# to x%y@z (where z is one of your local domains) is locally rerouted to
# x@y and sent on. Otherwise x%y is treated as an ordinary local part.

# percent_hack_domains = *

#sender_host_accept = +include_unknown:*
#sender_host_reject = +include_unknown:lsearch*;/etc/spammers


#!!# ignore_errmsg_errors_after renamed ignore_bounce_errors_after
ignore_bounce_errors_after = 2d

# This option cancels (removes) frozen messages that are older than a week.

timeout_frozen_after = 7d


tls_certificate = /etc/exim.crt
tls_privatekey = /etc/exim.key
tls_advertise_hosts = *

helo_accept_junk_hosts = *

smtp_enforce_sync = false


#!!#######################################################!!#
#!!# This new section of the configuration contains ACLs #!!#
#!!# (Access Control Lists) derived from the Exim 3      #!!#
#!!# policy control options.                             #!!#
#!!#######################################################!!#


#!!# These ACLs are crudely constructed from Exim 3 options.
#!!# They are almost certainly not optimal. You should study
#!!# them and rewrite as necessary.

begin acl

.include /etc/spf.acl
deny    !acl        = spf_rcpt_acl
deny    senders  = :
              !acl     = spf_from_acl


#!!# ACL that is used after the RCPT command
check_recipient:
# Exim 3 had no checking on -bs messages, so for compatibility
# we accept if the source is local SMTP (i.e. not over TCP/IP).
# We do this by testing for an empty sending host field.
accept hosts = :



#############################
# RBL SECOND PART START
#############################

accept domains = +local_domains
local_parts = postmaster:abuse

!hosts = @[]
!hosts = +rbl_relay_hosts

# !hosts = +relay_hosts
!authenticated = *

# Bypassed Local Domain Lists (i.e. - example.com)
!domains = +rbl_bypass

# Incoming hosts White Lists (i.e. - 122.34.56.34 or 122.34.56.34/24)
!hosts = +rbl_ip_whitelist

# Bypassed Senders Domain Lists (i.e. - *.example.com)
!hosts = +rbl_whitelist

# Bypassed Senders email Lists (i.e. - *@example.com or sender@???)
!senders = +rbl_email_bypass


deny message = Message rejected because your mail server $sender_fullhost \
is blacklisted at $dnslist_domain for sending spams ($dnslist_text)...

dnslists = relays.ordb.org :\
           sbl-xbl.spamhaus.org :\
           hil.habeas.com :\
           list.dsbl.org :\
           cbl.abuseat.org : \
           bl.spamcop.net :\
           dnsbl.njabl.org :\
           blackholes.easynet.nl : \
           dynablock.easynet.nl :\
           proxies.blackholes.easynet.nl :\
           spam.dnsbl.sorbs.net :\
           korea.services.net :\
           brazil.blackholes.us :\
           nigeria.blackholes.us :\
           argentina.blackholes.us :\
           malaysia.blackholes.us  :\
           singapore.blackholes.us :\
           taiwan.blackholes.us :\
           porn.rhs.mailpolice.com
           delay = 3s


require verify = reverse_host_lookup
       message = your mail server IP address ($sender_host_address) has no 
reverse DNS PTR hostname. \
       Please consider contacting us through our website or call us...\


#############################
# RBL SECOND PART END
#############################




  # Accept bounces to lists even if callbacks or other checks would fail
  warn     message      = X-WhitelistedRCPT-nohdrfromcallback: Yes
           condition    = \
           ${if and {{match{$local_part}{(.*)-bounces\+.*}} \
                     {exists 
{/usr/local/cpanel/3rdparty/mailman/lists/${lc:$1}/config.pck}}} \
                {yes}{no}}


  accept   condition    = \
           ${if and {{match{$local_part}{(.*)-bounces\+.*}} \
                     {exists 
{/usr/local/cpanel/3rdparty/mailman/lists/${lc:$1}/config.pck}}} \
                {yes}{no}}



  # Accept bounces to lists even if callbacks or other checks would fail
  warn     message      = X-WhitelistedRCPT-nohdrfromcallback: Yes
           condition    = \
           ${if and {{match{$local_part}{(.*)-bounces\+.*}} \
                     {exists 
{/usr/local/cpanel/3rdparty/mailman/lists/${lc:$1}_${lc:$domain}/config.pck}}} 
\
                {yes}{no}}


  accept   condition    = \
           ${if and {{match{$local_part}{(.*)-bounces\+.*}} \
                     {exists 
{/usr/local/cpanel/3rdparty/mailman/lists/${lc:$1}_${lc:$domain}/config.pck}}} 
\
                {yes}{no}}


#sender verifications are required for all messages that are not sent to
lists

require verify = sender

accept domains = +local_domains
endpass

#recipient verifications are required for all messages that are not sent
to the local machine
#this was done at multiple users requests

message = "The recipient cannot be verified. $acl_verify_message"
verify = recipient

accept domains = +relay_domains

  warn  message = ${perl{popbeforesmtpwarn}{$sender_host_name}}
        hosts = +relay_hosts
  accept  hosts = +relay_hosts


  warn  message = ${perl{popbeforesmtpwarn}{$sender_host_address}}
        condition = ${perl{checkrelayhost}{$sender_host_address}}
  accept  condition = ${perl{checkrelayhost}{$sender_host_address}}


  accept  hosts = +auth_relay_hosts
          endpass
          message = $sender_fullhost is currently not permitted to \
                        relay through this server. Perhaps you \
                        have not logged into the pop/imap server in the \
                        last 30 minutes or do not have SMTP Authentication 
turned on in your email client.
          authenticated = *


  deny    message = $sender_fullhost is currently not permitted to \
                        relay through this server. Perhaps you \
                        have not logged into the pop/imap server in the \
                        last 30 minutes or do not have SMTP Authentication 
turned on in your email client.



#!!# ACL that is used after the DATA command
check_message:
require verify = header_sender
##### clamav ACL, reject virus infected mails with proper error

deny message = This message contains malformed MIME ($demime_reason).
demime = *
condition = ${if >{$demime_errorlevel}{2}{1}{0}}

deny message = Hiding of file extensions(CLSID hidden) is not allowed.
regex =
^(?i)Content-Disposition::(.*?)filename=\\s*"+((\{[a-hA-H0-9-]{25,}\})|((.*?)\\s{10,}(.*?)))"+\$

deny message = This message contains a virus or other harmful content
($malware_name)
demime = *
malware = */defer_ok

deny message = Potentially executable attachment ".$found_extension". If
you meant \
to send this file then please package it up as a zip file and resend it.
demime =
ade:adp:bas:bat:chm:cmd:com:cpl:crt:eml:exe:hlp:hta:inf:ins:isp:jse:lnk:mdb:mde:msc:msi:msp:pcd:pif:reg:scr:sct:shs:url:vbs:vbe:wsf:wsh:wsc

# Add X-Scanned Header

warn message = X-Antivirus-Scanner: Clean mail though you should still use
an Antivirus

##### end clamav ACL
accept




begin authenticators

fixed_plain:
driver = plaintext
public_name = PLAIN
server_prompts = :
server_condition = "${perl{checkuserpass}{$1}{$2}{$3}}"
server_set_id = $2

fixed_login:
driver = plaintext
public_name = LOGIN
server_prompts = "Username:: : Password::"
server_condition = "${perl{checkuserpass}{$1}{$2}}"
server_set_id = $1





######################################################################
#                      REWRITE CONFIGURATION                         #
######################################################################


# There are no rewriting specifications in this default configuration file.

begin rewrite





#!!#######################################################!!#
#!!# Here follow routers created from the old routers,   #!!#
#!!# for handling non-local domains.                     #!!#
#!!#######################################################!!#


begin routers


#!!# If we are trying to deliver to a remote mailman domain that is on the
localhost
#!!# let it go though even if its not in /etc/localdomains since mailman
will eat
#!!# up 100% of the cpu if we don't

mailman_virtual_router:
    driver = accept
    require_files = 
/usr/local/cpanel/3rdparty/mailman/lists/${lc::$local_part}_${lc::$domain}/config.pck
    local_part_suffix_optional
    local_part_suffix = -admin     : \
   -bounces   : -bounces+* : \
                        -confirm   : -confirm+* : \
   -join      : -leave     : \
   -owner    : -request   : \
   -subscribe : -unsubscribe
    transport = mailman_virtual_transport


mailman_virtual_router_nodns:
    driver = accept
    require_files = 
/usr/local/cpanel/3rdparty/mailman/lists/${lc::$local_part}/config.pck
    condition    = \
           ${if or {{match{$local_part}{.*_.*}} \
                     {eq{$local_part}{mailman}}} \
                {1}{0}}
    local_part_suffix_optional
    local_part_suffix = -admin     : \
   -bounces   : -bounces+* : \
                        -confirm   : -confirm+* : \
   -join      : -leave     : \
   -owner    : -request   : \
   -subscribe : -unsubscribe
    domains = +local_domains
    transport = mailman_virtual_transport_nodns





######################################################################
#                      ROUTERS CONFIGURATION                         #
#            Specifies how remote addresses are handled              #
######################################################################
#                          ORDER DOES MATTER                         #
#  A remote address is passed to each in turn until it is accepted.  #
######################################################################


# Remote addresses are those with a domain that does not match any item
# in the "local_domains" setting above.

#############################
# RBL FOURTH PART START
#############################

reject_domains:
driver = redirect
domains = +rbl_domain_blacklist
allow_fail
data = :fail: Connection rejected: SPAM source $domain is manually
blacklisted.

#############################
# RBL FOURTH PART END
#############################


# This router routes to remote hosts over SMTP using a DNS lookup with
# default options.

lookuphost:
driver = dnslookup
condition = "${perl{checkspam}}"
domains = ! +local_domains
#ignore verisign to prevent waste of bandwidth
ignore_target_hosts = 0.0.0.0 : 127.0.0.0/8 : 64.94.110.0/24
headers_add = "${perl{mailtrapheaders}}"
transport = remote_smtp

# This router routes to remote hosts over SMTP by explicit IP address,
# given as a "domain literal" in the form [nnn.nnn.nnn.nnn]. The RFCs
# require this facility, which is why it is enabled by default in Exim.
# If you want to lock it out, set forbid_domain_literals in the main
# configuration section above.

literal:
driver = ipliteral
condition = "${perl{checkspam}}"
domains = ! +local_domains
headers_add = "${perl{mailtrapheaders}}"
transport = remote_smtp




#!!# This new router is put here to fail all domains that
#!!# were not in local_domains in the Exim 3 configuration.

fail_remote_domains:
driver = redirect
domains = ! +local_domains
allow_fail
data = :fail: unrouteable mail domain "$domain"





#!!#######################################################!!#
#!!# Here follow routers created from the old directors, #!!#
#!!# for handling local domains.                         #!!#
#!!#######################################################!!#




######################################################################
#                      DIRECTORS CONFIGURATION                       #
#             Specifies how local addresses are handled              #
######################################################################
#                          ORDER DOES MATTER                         #
#   A local address is passed to each in turn until it is accepted.  #
######################################################################


# Local addresses are those with a domain that matches some item in the
# "local_domains" setting above, or those which are passed back from the
# routers because of a "self=local" setting (not used in this
configuration).


# This director handles aliasing using a traditional /etc/aliases file.
# If any of your aliases expand to pipes or files, you will need to set
# up a user and a group for these deliveries to run under. You can do
# this by uncommenting the "user" option below (changing the user name
# as appropriate) and adding a "group" option if necessary. Alternatively,
you
# can specify "user" on the transports that are used. Note that those
# listed below are the same as are used for .forward files; you might want
# to set up different ones for pipe and file deliveries from aliases.

#spam_filter:
# driver = forwardfile
# file = /etc/spam.filter
# no_check_local_user
# no_verify
# filter
# allow_system_actions






virtual_sa_user:
driver = accept
headers_add="${perl{gensaheader_virtual}{$domain}}"
condition =
"${perl{checksa_deliver}{$domain}{$local_part}{$received_protocol}}"
domains = lsearch;/etc/userdomains
retry_use_local_part
transport = virtual_sa_userdelivery

sa_localuser:
driver = accept
check_local_user
headers_add="${perl{gensaheader}{$local_part}}"
condition = "${perl{checkusersa}{$local_part}{$received_protocol}}"
domains = ! lsearch;/etc/userdomains
transport = local_sa_delivery




central_filter:
#!!# filter renamed allow_filter
driver = redirect
allow_filter
no_check_local_user
file = /etc/vfilters/${domain}
file_transport = address_file
pipe_transport = virtual_address_pipe
reply_transport = address_reply
retry_use_local_part
user = "${lookup{$domain}lsearch* {/etc/userdomains}{$value}}"
no_verify

central_user_filter:
driver = redirect
allow_filter
check_local_user
domains = ! lsearch;/etc/userdomains
condition = "${perl{hasfilterfile}{$local_part}}"
file = "${perl{getfilterfile}{$local_part}}"
file_transport = address_file
pipe_transport = virtual_address_pipe
reply_transport = address_reply
retry_use_local_part
no_verify

virtual_aliases_nostar:
driver = redirect
allow_defer
allow_fail
data = ${if
exists{/etc/valiases/$domain}{${lookup{$local_part@$domain}lsearch{/etc/valiases/$domain}}}}
file_transport = address_file
group = mail
pipe_transport = virtual_address_pipe
retry_use_local_part
domains = lsearch;/etc/localdomains
unseen

virtual_user_spam:
driver = accept
condition = "${perl{check_deliver_spam}{$domain}{$local_part}}"
headers_remove="x-spam-exim"
domains = lsearch;/etc/userdomains
retry_use_local_part
transport = virtual_userdelivery_spam

virtual_boxtraper_user:
driver = accept
condition = "${perl{checkbx_deliver}{$domain}{$local_part}}"
require_files = "/usr/local/cpanel/bin/boxtrapper"
domains = lsearch;/etc/userdomains
retry_use_local_part
transport = virtual_boxtrapper_userdelivery


virtual_user:
driver = accept
condition = "${perl{check_deliver}{$domain}{$local_part}}"
headers_remove="x-spam-exim"
domains = lsearch;/etc/userdomains
retry_use_local_part
transport = virtual_userdelivery


has_alias_but_no_mailbox_discarded_to_prevent_loop:
 driver = redirect
        condition = "${perl{checkvalias}{$domain}{$local_part}}"
  domains = lsearch;/etc/localdomains
 data="#Exim Filter\nseen finish"
   group = "${lookup{$domain}lsearch* {/etc/userdomains}{$value}}"
 user = "${lookup{$domain}lsearch* {/etc/userdomains}{$value}}"
 allow_filter
 disable_logging = true


valias_domain_file:
driver = redirect
allow_defer
allow_fail
condition = ${lookup {$domain} lsearch
{/etc/vdomainaliases/$domain}{yes}{no} }
require_files = /etc/vdomainaliases/$domain
data = $local_part@${lookup {$domain} lsearch
{/etc/vdomainaliases/$domain} }



virtual_aliases:
driver = redirect
allow_defer
allow_fail
data = ${if
exists{/etc/valiases/$domain}{${lookup{*}lsearch{/etc/valiases/$domain}}}}
file_transport = address_file
group = mail
pipe_transport = virtual_address_pipe
domains = lsearch;/etc/localdomains
retry_use_local_part






# This director handles forwarding using traditional .forward files.
# If you want it also to allow mail filtering when a forward file
# starts with the string "# Exim filter", uncomment the "filter" option.
# The check_ancestor option means that if the forward file generates an
# address that is an ancestor of the current one, the current one gets
# passed on instead. This covers the case where A is aliased to B and B
# has a .forward file pointing to A. The three transports specified at the
# end are those that are used when forwarding generates a direct delivery
# to a file, or to a pipe, or sets up an auto-reply, respectively.

system_aliases:
driver = redirect
allow_defer
allow_fail
data = ${lookup{$local_part}lsearch{/etc/aliases}}
file_transport = address_file
pipe_transport = address_pipe
retry_use_local_part
# user = exim


local_aliases:
driver = redirect
allow_defer
allow_fail
data = ${lookup{$local_part}lsearch{/etc/localaliases}}
file_transport = address_file
pipe_transport = address_pipe
check_local_user



userforward:
#!!# filter renamed allow_filter
driver = redirect
allow_filter
check_ancestor
check_local_user
domains = ! lsearch;/etc/userdomains
no_expn
file = $home/.forward
file_transport = address_file
pipe_transport = address_pipe
reply_transport = address_reply
no_verify

localuser_spam:
driver = accept
headers_remove="x-spam-exim"
condition = "${perl{checkuserspambox}{$local_part}}"
check_local_user
domains = ! lsearch;/etc/userdomains
transport = local_delivery_spam

boxtrapper_localuser:
driver = accept
condition = "${perl{checkuserbx}{$local_part}}"
require_files = "/usr/local/cpanel/bin/boxtrapper"
check_local_user
domains = ! lsearch;/etc/userdomains
transport = local_boxtrapper_delivery


localuser:
driver = accept
headers_remove="x-spam-exim"
check_local_user
domains = ! lsearch;/etc/userdomains
transport = local_delivery



# This director matches local user mailboxes.







######################################################################
#                      TRANSPORTS CONFIGURATION                      #
######################################################################
#                       ORDER DOES NOT MATTER                        #
#     Only one appropriate transport is called for each delivery.    #
######################################################################


# A transport is used only when referenced from a director or a router that
# successfully handles an address.


# This transport is used for delivering messages over SMTP connections.

begin transports





remote_smtp:
driver = smtp


# This transport is used for local delivery to user mailboxes. By default
# it will be run under the uid and gid of the local user, and requires
# the sticky bit to be set on the /var/mail directory. Some systems use
# the alternative approach of running mail deliveries under a particular
# group instead of using the sticky bit. The commented options below show
# how this can be done.

local_delivery:
driver = appendfile
delivery_date_add
envelope_to_add
file =
"${extract{5}{:}{${lookup{$local_part}lsearch{/etc/passwd}{$value}}}}/mail/inbox"
group = mail
mode = 0660
return_path_add
user = $local_part

local_delivery_spam:
driver = appendfile
delivery_date_add
envelope_to_add
file =
"${extract{5}{:}{${lookup{$local_part}lsearch{/etc/passwd}{$value}}}}/mail/spam"
group = mail
mode = 0660
return_path_add
user = $local_part

local_sa_delivery:
driver = pipe
command = /usr/sbin/sendmail -bS
use_bsmtp = true
transport_filter = "/usr/bin/spamc"
user = $local_part
group = mail
log_output = true
current_directory = "/tmp"
home_directory = "/tmp"
return_fail_output = true
return_path_add = false
message_prefix =
message_suffix =
timeout_defer = true
transport_filter_timeout = 5m
temp_errors = 2





# This transport is used for handling pipe deliveries generated by alias
# or .forward files. If the pipe generates any standard output, it is
returned
# to the sender of the message as a delivery error. Set return_fail_output
# instead of return_output if you want this to happen only when the pipe
fails
# to complete normally. You can set different transports for aliases and
# forwards if you want to - see the references to address_pipe below.

address_pipe:
driver = pipe
return_output

virtual_address_pipe:
driver = pipe
group = "${lookup{$domain}lsearch* {/etc/userdomains}{$value}}"
return_output
user = "${lookup{$domain}lsearch* {/etc/userdomains}{$value}}"

# This transport is used for handling deliveries directly to files that are
# generated by aliassing or forwarding.

address_file:
driver = appendfile
delivery_date_add
envelope_to_add
return_path_add


# This transport is used for handling autoreplies generated by the
filtering
# option of the forwardfile director.

virtual_sa_userdelivery:
driver = pipe
command = /usr/sbin/sendmail -bS
use_bsmtp = true
transport_filter = "/usr/bin/spamc"
user = "${lookup{$domain}lsearch* {/etc/userdomains}{$value}}"
group = mail
log_output = true
current_directory = "/tmp"
home_directory = "/tmp"
return_fail_output = true
return_path_add = false
message_prefix =
message_suffix =
timeout_defer = true
transport_filter_timeout = 5m
temp_errors = 2

virtual_userdelivery_spam:
driver = appendfile
delivery_date_add
envelope_to_add
file =
"${extract{5}{:}{${lookup{${lookup{$domain}lsearch*{/etc/userdomains}{$value}}}lsearch{/etc/passwd}{$value}}}}/mail/${domain}/${local_part}/spam"
group = mail
mode = 0660
quota = "${if
exists{${extract{5}{:}{${lookup{${lookup{$domain}lsearch*{/etc/userdomains}{$value}}}lsearch{/etc/passwd}{$value}}}}/etc/${domain}/quota}
{${lookup{$local_part}lsearch*{${extract{5}{:}{${lookup{${lookup{$domain}lsearch*{/etc/userdomains}{$value}}}lsearch{/etc/passwd}{$value}}}}/etc/${domain}/quota}{$value}}}
{}}"
return_path_add
user = "${lookup{$domain}lsearch* {/etc/userdomains}{$value}}"

local_boxtrapper_delivery:
driver = pipe
command = /usr/local/cpanel/bin/boxtrapper "${local_part}"
user = $local_part
group = mail
log_output = true
current_directory = "/tmp"
return_fail_output = true
return_path_add = false

virtual_boxtrapper_userdelivery:
driver = pipe
command = /usr/local/cpanel/bin/boxtrapper "${local_part}@${domain}"
user = "${lookup{$domain}lsearch* {/etc/userdomains}{$value}}"
group = mail
log_output = true
current_directory = "/tmp"
return_fail_output = true
return_path_add = false



virtual_userdelivery:
driver = appendfile
delivery_date_add
envelope_to_add
file =
"${extract{5}{:}{${lookup{${lookup{$domain}lsearch*{/etc/userdomains}{$value}}}lsearch{/etc/passwd}{$value}}}}/mail/${domain}/${local_part}/inbox"
group = mail
mode = 0660
quota = "${if
exists{${extract{5}{:}{${lookup{${lookup{$domain}lsearch*{/etc/userdomains}{$value}}}lsearch{/etc/passwd}{$value}}}}/etc/${domain}/quota}
{${lookup{$local_part}lsearch*{${extract{5}{:}{${lookup{${lookup{$domain}lsearch*{/etc/userdomains}{$value}}}lsearch{/etc/passwd}{$value}}}}/etc/${domain}/quota}{$value}}}
{}}"
return_path_add
user = "${lookup{$domain}lsearch* {/etc/userdomains}{$value}}"


address_reply:
driver = autoreply


mailman_virtual_transport:
    driver = pipe
    command = /usr/local/cpanel/3rdparty/mailman/mail/mailman \
              '${if def:local_part_suffix \
                    {${sg{$local_part_suffix}{-(\\w+)(\\+.*)?}{\$1}}} \
                    {post}}' \
              ${lc:$local_part}_${lc:$domain}
    current_directory = /usr/local/cpanel/3rdparty/mailman
    home_directory = /usr/local/cpanel/3rdparty/mailman
    user = mailman
    group = mailman



mailman_virtual_transport_nodns:
    driver = pipe
    command = /usr/local/cpanel/3rdparty/mailman/mail/mailman \
              '${if def:local_part_suffix \
                    {${sg{$local_part_suffix}{-(\\w+)(\\+.*)?}{\$1}}} \
                    {post}}' \
              ${lc:$local_part}
    current_directory = /usr/local/cpanel/3rdparty/mailman
    home_directory = /usr/local/cpanel/3rdparty/mailman
    user = mailman
    group = mailman










######################################################################
#                      RETRY CONFIGURATION                           #
######################################################################


# This single retry rule applies to all domains and all errors. It
specifies
# retries every 15 minutes for 2 hours, then increasing retry intervals,
# starting at 1 hour and increasing each time by a factor of 1.5, up to 16
# hours, then retries every 8 hours until 4 days have passed since the
first
# failed delivery.

# Domain               Error       Retries
# ------               -----       -------



begin retry

* quota



*                      *           F,2h,15m; G,16h,1h,1.5; F,4d,8h





# End of Exim 4 configuration


#################################################
#                                             end (exim.conf) 
#
#################################################