Hi
I have included the ACL and rest of my config file. Hope that helps.
Regards
Gawie Marais
-----Original Message-----
From: exim-users-bounces@??? [
mailto:exim-users-bounces@exim.org] On
Behalf Of Marc Sherman
Sent: Wednesday, May 04, 2005 1:12 PM
To: GamCo - Gawie Marais
Cc: exim-users@???
Subject: Re: [exim] Strange Filter Rejection
GamCo - Gawie Marais wrote:
> Hi Guys,
>
> We have one e-mail address being rejected with the following in my
> log files. Can anyone please shed some light here ? Odd thing is, is
> that no other e-mails are being rejected, except this one.
>
> I have no idea why or what system flter would reject e-mails coming
> from this e-mail address...
You'll need to post the contents of your system filter.
- Marc
--
## List details at
http://www.exim.org/mailman/listinfo/exim-users
## Exim details at
http://www.exim.org/
## Please use the Wiki with this list -
http://www.exim.org/eximwiki/
######################################################################
# ACL CONFIGURATION #
# Specifies access control lists for incoming SMTP mail #
######################################################################
begin acl
#acl_check_blist:
#deny hosts = partial()lsearch;/etc/exim/sa-blacklist.current.domains
# message = $sender_host_address Blocked by
http://www.stearns.org/sa-blacklist/
check_etrn:
accept hosts = *
deny hosts = *
message = Access Denied!! !!!! the flip flop
acl_check_rcpt:
accept hosts = : 127.0.0.1
deny senders = :
domains = modelmaker.co.za : jhdesign.co.za : edx.co.za
message = No valid Sender specified
deny local_parts = ^.*[@%!/|] : ^\\.
accept local_parts = postmaster
domains = +local_domains
deny message = rejected because $sender_host_address is in a black list at $dnslist_domain\n$dnslist_text
# dnslists = sbl-xbl.spamhaus.org:relays.ordb.org:dul.dnsbl.sorbs.net:multi.surbl.org
dnslists = sbl-xbl.spamhaus.org:relays.ordb.org:multi.surbl.org
accept domains = +local_domains
endpass
message = unknown user
verify = recipient
delay = 20s
accept domains = +relay_to_domains
endpass
message = unrouteable address
verify = recipient
delay = 20s
accept hosts = +relay_from_hosts
accept authenticated = *
delay = 20s
acl_check_content:
deny message = This message contains an unwanted file extension ($found_extension)
demime = scr:com:vbs:bat:lnk:pif
accept
######################################################################
# ROUTERS CONFIGURATION #
# Specifies how addresses are handled #
######################################################################
# THE ORDER IN WHICH THE ROUTERS ARE DEFINED IS IMPORTANT! #
# An address is passed to each router in turn until it is accepted. #
######################################################################
begin routers
dnslookup:
driver = dnslookup
domains = ! +local_domains
transport = remote_email
ignore_target_hosts = 0.0.0.0 : 127.0.0.0/8
no_more
amavis:
driver = manualroute
transport = amavis
route_list = "* localhost byname"
self = send
condition = "${if or {{eq {$interface_port}{10025}} \
{eq {$received_protocol}{spam-scanned}} \
{eq {$sender_address}{}} \
}{0}{1}}"
autorespond:
driver = accept
condition = ${if eq{} {${lookup mysql{SELECT autoresponder FROM email WHERE autoresponder='YES' AND address="$local_part" AND domain="$domain" AND in_use='1'}}}{no}{yes}}
no_verify
no_expn
unseen
transport = auto_responder
email:
driver = accept
condition = ${if eq{} {${lookup mysql {SELECT address FROM email WHERE address="$local_part" AND domain="$domain" AND in_use='1' and email_type="1" }}}{no}{yes}}
transport = local_email
wildcards:
driver = redirect
file_transport = address_file
pipe_transport = address_pipe
data = ${lookup mysql{SELECT pointer FROM email WHERE address="@" AND domain="$domain" AND email_type='3'}}
system_aliases:
driver = redirect
allow_fail
allow_defer
data = ${lookup{$local_part}lsearch{/etc/aliases}}
file_transport = address_file
pipe_transport = address_pipe
aliases:
driver = redirect
file_transport = address_file
pipe_transport = address_pipe
data = ${lookup mysql{SELECT pointer FROM email WHERE address="$local_part" AND domain="$domain" AND email_type="2"}}
exilist_post_router:
driver = accept
verify_sender = false
condition = ${lookup mysql {select id from lists where name='$local_part' and domain='$domain'}}
transport = exilist_post_transport
exilist_bounce_router:
driver = accept
verify_sender = false
condition = ${if match {$local_part}{^[0-9]+_return_[0-9]+\\.[A-Za-z0-9-]+\$}{1}{0}}
transport = exilist_bounce_transport
localuser:
driver = accept
check_local_user
transport = local_delivery
cannot_route_message = Unknown user
######################################################################
# TRANSPORTS CONFIGURATION #
######################################################################
# ORDER DOES NOT MATTER #
# Only one appropriate transport is called for each delivery. #
######################################################################
begin transports
amavis:
driver = smtp
hosts = 10.0.0.52
port = 10024
allow_localhost
user = exim
hosts_override
remote_email:
driver = smtp
user = exim
local_email:
driver = appendfile
file = /var/mail/$domain/$local_part
create_directory
delivery_date_add
envelope_to_add
return_path_add
user = web
group = web
mode = 0660
directory_mode = 0770
quota = ${lookup mysql{select mquota from email where address="$local_part" and domain="$domain"}{$value} {5M}}
quota_warn_threshold = 90%
quota_warn_message = "\
To: $local_part@$domain\n\
Subject: Your mailbox\n\n\
Greetings\n\n\
Your mailbox is using 90% of its quota.\n\
For further information contact your ISP Support.\n\n\
\n\n\"
auto_responder:
driver = autoreply
reply_to = "${local_part}@${domain}"
from = "${local_part}@${domain}"
to = "${sender_address}"
once = "/autoreply/${domain}-${local_part}"
once_repeat = 500s
# headers = "MIME-Version: 1.0\n\
#Content-type: text/html; charset=iso-8859-1\n"
subject = ${lookup mysql{SELECT arsubject FROM email WHERE address="$local_part" AND domain="$domain"}{$value}{Automatic reply from ${local_part}@${domain}}}
text = ${lookup mysql{SELECT artext FROM email WHERE address="$local_part" AND domain="$domain"}{$value}}
user = web
group = web
exilist_post_transport:
driver = pipe
command = EXILIST_BIN "${lookup mysql {select id from lists where name='$local_part' and domain='$domain'}}" post none $message_id $sender_address $reply_address
user = EXILIST_UID
group = EXILIST_GID
current_directory = EXILIST_HOME
home_directory = EXILIST_HOME
return_fail_output
exilist_bounce_transport:
driver = pipe
command = EXILIST_BIN ${extract{1}{_}{$local_part}} ${extract{2}{_}{$local_part}} ${extract{3}{_}{$local_part}} $message_id $sender_address $reply_address
user = EXILIST_UID
group = EXILIST_GID
current_directory = EXILIST_HOME
home_directory = EXILIST_HOME
return_fail_output
local_delivery:
driver = appendfile
file = /var/mail/$domain/$local_part
delivery_date_add
envelope_to_add
return_path_add
#localuser:
# driver = accept
# check_local_user
# transport = local_delivery
# cannot_route_message = Unknown user
######################################################################
# RETRY CONFIGURATION #
######################################################################
begin retry
# Domain Error Retries
# ------ ----- -------
* quota
* * F,2h,15m; G,16h,1h,1.5; F,3d,6h
######################################################################
# REWRITE CONFIGURATION #
######################################################################
# There are no rewriting specifications in this default configuration file.
begin rewrite
######################################################################
# AUTHENTICATION CONFIGURATION #
######################################################################
# There are no authenticator specifications in this default configuration file.
begin authenticators
######################################################################
# CONFIGURATION FOR local_scan() #
######################################################################
# If you have built Exim to include a local_scan() function that contains
# tables for private options, you can define those options here. Remember to
# uncomment the "begin" line. It is commented by default because it provokes
# an error with Exim binaries that are not built with LOCAL_SCAN_HAS_OPTIONS
# set in the Local/Makefile.
# begin local_scan
# End of Exim configuration file
