ph10 2004/10/06 16:07:40 BST
Added files:
exim-src/OS Makefile-AIX Makefile-BSDI Makefile-Base
Makefile-CYGWIN Makefile-DGUX
Makefile-Darwin Makefile-Default
Makefile-FreeBSD Makefile-GNU
Makefile-HI-OSF Makefile-HI-UX
Makefile-HP-UX Makefile-HP-UX-9
Makefile-IRIX Makefile-IRIX6
Makefile-IRIX632 Makefile-IRIX65
Makefile-Linux Makefile-Linux-libc5
Makefile-NetBSD Makefile-NetBSD-a.out
Makefile-OSF1 Makefile-OpenBSD
Makefile-OpenUNIX Makefile-QNX
Makefile-SCO Makefile-SCO_SV
Makefile-SunOS4 Makefile-SunOS5
Makefile-SunOS5-hal Makefile-ULTRIX
Makefile-UNIX_SV Makefile-USG
Makefile-Unixware7 Makefile-mips
eximon.conf-Default os.Configuring
os.c-GNU os.c-HI-OSF os.c-IRIX os.c-IRIX6
os.c-IRIX632 os.c-IRIX65 os.c-Linux
os.c-Linux-libc5 os.c-OSF1 os.c-cygwin
os.h-AIX os.h-BSDI os.h-DGUX os.h-Darwin
os.h-FreeBSD os.h-GNU os.h-HI-OSF
os.h-HI-UX os.h-HP-UX os.h-HP-UX-9
os.h-IRIX os.h-IRIX6 os.h-IRIX632
os.h-IRIX65 os.h-Linux os.h-Linux-libc5
os.h-NetBSD os.h-NetBSD-a.out os.h-OSF1
os.h-OpenBSD os.h-OpenUNIX os.h-QNX
os.h-SCO os.h-SCO_SV os.h-SunOS4
os.h-SunOS5 os.h-SunOS5-hal os.h-ULTRIX
os.h-UNIX_SV os.h-USG os.h-Unixware7
os.h-cygwin os.h-mips
exim-src/scripts Configure Configure-Makefile
Configure-config.h Configure-eximon
Configure-os.c Configure-os.h MakeLinks
arch-type exim_install newer os-type
Log:
Start
Revision Changes Path
1.1 +26 -0 exim/exim-src/OS/Makefile-AIX (new)
1.1 +23 -0 exim/exim-src/OS/Makefile-BSDI (new)
1.1 +703 -0 exim/exim-src/OS/Makefile-Base (new)
1.1 +113 -0 exim/exim-src/OS/Makefile-CYGWIN (new)
1.1 +33 -0 exim/exim-src/OS/Makefile-DGUX (new)
1.1 +26 -0 exim/exim-src/OS/Makefile-Darwin (new)
1.1 +332 -0 exim/exim-src/OS/Makefile-Default (new)
1.1 +36 -0 exim/exim-src/OS/Makefile-FreeBSD (new)
1.1 +24 -0 exim/exim-src/OS/Makefile-GNU (new)
1.1 +10 -0 exim/exim-src/OS/Makefile-HI-OSF (new)
1.1 +14 -0 exim/exim-src/OS/Makefile-HI-UX (new)
1.1 +17 -0 exim/exim-src/OS/Makefile-HP-UX (new)
1.1 +17 -0 exim/exim-src/OS/Makefile-HP-UX-9 (new)
1.1 +14 -0 exim/exim-src/OS/Makefile-IRIX (new)
1.1 +15 -0 exim/exim-src/OS/Makefile-IRIX6 (new)
1.1 +18 -0 exim/exim-src/OS/Makefile-IRIX632 (new)
1.1 +18 -0 exim/exim-src/OS/Makefile-IRIX65 (new)
1.1 +31 -0 exim/exim-src/OS/Makefile-Linux (new)
1.1 +23 -0 exim/exim-src/OS/Makefile-Linux-libc5 (new)
1.1 +27 -0 exim/exim-src/OS/Makefile-NetBSD (new)
1.1 +24 -0 exim/exim-src/OS/Makefile-NetBSD-a.out (new)
1.1 +12 -0 exim/exim-src/OS/Makefile-OSF1 (new)
1.1 +26 -0 exim/exim-src/OS/Makefile-OpenBSD (new)
1.1 +19 -0 exim/exim-src/OS/Makefile-OpenUNIX (new)
1.1 +31 -0 exim/exim-src/OS/Makefile-QNX (new)
1.1 +29 -0 exim/exim-src/OS/Makefile-SCO (new)
1.1 +34 -0 exim/exim-src/OS/Makefile-SCO_SV (new)
1.1 +23 -0 exim/exim-src/OS/Makefile-SunOS4 (new)
1.1 +24 -0 exim/exim-src/OS/Makefile-SunOS5 (new)
1.1 +20 -0 exim/exim-src/OS/Makefile-SunOS5-hal (new)
1.1 +20 -0 exim/exim-src/OS/Makefile-ULTRIX (new)
1.1 +26 -0 exim/exim-src/OS/Makefile-UNIX_SV (new)
1.1 +35 -0 exim/exim-src/OS/Makefile-USG (new)
1.1 +34 -0 exim/exim-src/OS/Makefile-Unixware7 (new)
1.1 +19 -0 exim/exim-src/OS/Makefile-mips (new)
1.1 +43 -0 exim/exim-src/OS/eximon.conf-Default (new)
1.1 +209 -0 exim/exim-src/OS/os.Configuring (new)
1.1 +57 -0 exim/exim-src/OS/os.c-GNU (new)
1.1 +37 -0 exim/exim-src/OS/os.c-HI-OSF (new)
1.1 +120 -0 exim/exim-src/OS/os.c-IRIX (new)
1.1 +120 -0 exim/exim-src/OS/os.c-IRIX6 (new)
1.1 +120 -0 exim/exim-src/OS/os.c-IRIX632 (new)
1.1 +120 -0 exim/exim-src/OS/os.c-IRIX65 (new)
1.1 +155 -0 exim/exim-src/OS/os.c-Linux (new)
1.1 +39 -0 exim/exim-src/OS/os.c-Linux-libc5 (new)
1.1 +38 -0 exim/exim-src/OS/os.c-OSF1 (new)
1.1 +652 -0 exim/exim-src/OS/os.c-cygwin (new)
1.1 +25 -0 exim/exim-src/OS/os.h-AIX (new)
1.1 +12 -0 exim/exim-src/OS/os.h-BSDI (new)
1.1 +27 -0 exim/exim-src/OS/os.h-DGUX (new)
1.1 +29 -0 exim/exim-src/OS/os.h-Darwin (new)
1.1 +12 -0 exim/exim-src/OS/os.h-FreeBSD (new)
1.1 +20 -0 exim/exim-src/OS/os.h-GNU (new)
1.1 +11 -0 exim/exim-src/OS/os.h-HI-OSF (new)
1.1 +20 -0 exim/exim-src/OS/os.h-HI-UX (new)
1.1 +19 -0 exim/exim-src/OS/os.h-HP-UX (new)
1.1 +22 -0 exim/exim-src/OS/os.h-HP-UX-9 (new)
1.1 +22 -0 exim/exim-src/OS/os.h-IRIX (new)
1.1 +21 -0 exim/exim-src/OS/os.h-IRIX6 (new)
1.1 +23 -0 exim/exim-src/OS/os.h-IRIX632 (new)
1.1 +21 -0 exim/exim-src/OS/os.h-IRIX65 (new)
1.1 +39 -0 exim/exim-src/OS/os.h-Linux (new)
1.1 +13 -0 exim/exim-src/OS/os.h-Linux-libc5 (new)
1.1 +15 -0 exim/exim-src/OS/os.h-NetBSD (new)
1.1 +7 -0 exim/exim-src/OS/os.h-NetBSD-a.out (new)
1.1 +13 -0 exim/exim-src/OS/os.h-OSF1 (new)
1.1 +15 -0 exim/exim-src/OS/os.h-OpenBSD (new)
1.1 +18 -0 exim/exim-src/OS/os.h-OpenUNIX (new)
1.1 +23 -0 exim/exim-src/OS/os.h-QNX (new)
1.1 +20 -0 exim/exim-src/OS/os.h-SCO (new)
1.1 +18 -0 exim/exim-src/OS/os.h-SCO_SV (new)
1.1 +38 -0 exim/exim-src/OS/os.h-SunOS4 (new)
1.1 +33 -0 exim/exim-src/OS/os.h-SunOS5 (new)
1.1 +13 -0 exim/exim-src/OS/os.h-SunOS5-hal (new)
1.1 +17 -0 exim/exim-src/OS/os.h-ULTRIX (new)
1.1 +24 -0 exim/exim-src/OS/os.h-UNIX_SV (new)
1.1 +18 -0 exim/exim-src/OS/os.h-USG (new)
1.1 +21 -0 exim/exim-src/OS/os.h-Unixware7 (new)
1.1 +53 -0 exim/exim-src/OS/os.h-cygwin (new)
1.1 +26 -0 exim/exim-src/OS/os.h-mips (new)
1.1 +11 -0 exim/exim-src/scripts/Configure (new)
1.1 +170 -0 exim/exim-src/scripts/Configure-Makefile (new)
1.1 +54 -0 exim/exim-src/scripts/Configure-config.h (new)
1.1 +52 -0 exim/exim-src/scripts/Configure-eximon (new)
1.1 +31 -0 exim/exim-src/scripts/Configure-os.c (new)
1.1 +49 -0 exim/exim-src/scripts/Configure-os.h (new)
1.1 +244 -0 exim/exim-src/scripts/MakeLinks (new)
1.1 +75 -0 exim/exim-src/scripts/arch-type (new)
1.1 +446 -0 exim/exim-src/scripts/exim_install (new)
1.1 +22 -0 exim/exim-src/scripts/newer (new)
1.1 +170 -0 exim/exim-src/scripts/os-type (new)
Index: Makefile-AIX
====================================================================
# $Cambridge: exim/exim-src/OS/Makefile-AIX,v 1.1 2004/10/06 15:07:39 ph10 Exp $
# Exim: OS-specific make file for AIX
# Written by Nick Waterman (nick@???)
# Note that the output of uname -m is probably not what Philip expected,
# so you might end up with more build-AIX-random_number directories than
# you expected if you have too many AIX boxes, but it seems to work... I
# blame IBM.
# Note that nowadays you have to pay extra for a compiler with AIX!
CC=cc
# This needs to be in here rather than os.h-AIX because of regexp stuff.
# basically strchr is a #define, which means "extern char *strchr()"
# ruins things. __STR31__ seems to get around this by magic. The AIX
# include files are quite a confusing maze.
CFLAGS = -D__STR31__
# Needed for vfork() and vfork() only?
LIBS = -lbsd
# End
Index: Makefile-BSDI
====================================================================
# $Cambridge: exim/exim-src/OS/Makefile-BSDI,v 1.1 2004/10/06 15:07:39 ph10 Exp $
# Exim: OS-specific make file for BSDI. Its antique link editor
# cannot handle the TextPop overriding.
CFLAGS=-O
CHOWN_COMMAND=/usr/sbin/chown
HAVE_SA_LEN=YES
X11=/usr/X11
XINCLUDE=-I$(X11)/include
XLFLAGS=-L$(X11)/lib
X11_LD_LIB=$(X11)/lib
LIBS_EXIMON=-lSM -lICE -lipc
EXIMON_TEXTPOP=
EXIWHAT_PS_ARG=-ax
EXIWHAT_EGREP_ARG='/exim( |$$)'
EXIWHAT_KILL_SIGNAL=-USR1
# End
Index: Makefile-Base
====================================================================
# $Cambridge: exim/exim-src/OS/Makefile-Base,v 1.1 2004/10/06 15:07:39 ph10 Exp $
# This file is the basis of the main makefile for Exim and friends. The
# makefile at the top level arranges to build the main makefile by calling
# scripts/Configure-Makefile from within the build directory. This
# concatentates the configuration settings from Local/Makefile and other,
# optional, Local/* files at the front of this file, to create Makefile in the
# build directory.
SHELL = $(MAKE_SHELL)
SCRIPTS = ../scripts
EDITME = ../Local/Makefile
EXIMON_EDITME = ../Local/eximon.conf
# The compiler used for linking is normally the same as the compiler used for
# compiling. However, by giving it a different name, we can override it from
# the command line, and this is helpful for certain types of testing.
LNCC = $(CC)
# The default target double-checks the existence of $(EDITME) and then arranges
# to touch it if it exists and any of the optional configuration files, which
# depend on the os or the architecture, have been altered. The same sub-target
# does the same thing for the eximon configuration file if it exists. Then
# there is a check that the Makefile (the one built from this file) is
# up-to-date. Then the os-specific source files and the C configuration file
# are set up, and finally it goes to the main Exim target.
all: $(EDITME) checklocalmake Makefile os.h os.c config.h allexim
checklocalmake:
@if $(SHELL) $(SCRIPTS)/newer $(EDITME)-$(OSTYPE) $(EDITME) || \
$(SHELL) $(SCRIPTS)/newer $(EDITME)-$(ARCHTYPE) $(EDITME) || \
$(SHELL) $(SCRIPTS)/newer $(EDITME)-$(OSTYPE)-$(ARCHTYPE) $(EDITME); \
then \
touch $(EDITME); \
fi
@if $(SHELL) $(SCRIPTS)/newer $(EXIMON_EDITME)-$(OSTYPE) $(EXIMON_EDITME) || \
$(SHELL) $(SCRIPTS)/newer $(EXIMON_EDITME)-$(ARCHTYPE) $(EXIMON_EDITME) || \
$(SHELL) $(SCRIPTS)/newer $(EXIMON_EDITME)-$(OSTYPE)-$(ARCHTYPE) $(EXIMON_EDITME); \
then \
if [ -f $(EXIMON_EDITME) ]; then touch $(EXIMON_EDITME); fi \
fi
$(EDITME):
@echo " "
@echo "*** Please create Local/Makefile by copying src/EDITME and making"
@echo "*** appropriate changes for your site."
@echo " "
@false
$(EXIMON_EDITME):
@echo " "
@echo "*** Please create Local/eximon.conf by copying exim_monitor/EDITME and making"
@echo "*** appropriate changes for your site."
@echo " "
@test ! -d ../Local && mkdir ../Local
@false
# Check that the local Makefile is up-to-date
Makefile: ../OS/Makefile-Base ../OS/Makefile-Default \
$(SCRIPTS)/Configure $(SCRIPTS)/Configure-Makefile $(EDITME)
@echo " "
@echo "*** Makefile needs rebuilding"
@echo "*** Please run \"make makefile\" at top level"
@echo " "
@false
# Build (link) the os.h file
os.h:
$(SHELL) $(SCRIPTS)/Configure-os.h
# Build the os.c file
os.c: ../src/os.c
$(SHELL) $(SCRIPTS)/Configure-os.c
# Build the config.h file.
config.h: Makefile buildconfig ../src/config.h.defaults $(EDITME)
$(SHELL) $(SCRIPTS)/Configure-config.h
# This target is recognized specially by GNU make. It records those targets
# that do not correspond to files that are being built and which should
# therefore always be run, even if the files exist. This shouldn't in fact be a
# problem, but it does no harm. Other make programs will just ignore this.
.PHONY: all allexim buildauths buildlookups buildpcre buildrouters \
buildtransports checklocalmake clean
# This is the real default target for all the various exim binaries and
# scripts, once the configuring stuff is done.
allexim: config.h buildpcre $(EXIM_MONITOR) exicyclog exinext exiwhat \
exigrep eximstats exipick exiqgrep exiqsumm \
transport-filter.pl convert4r3 convert4r4 \
exim_checkaccess \
exim_dbmbuild exim_dumpdb exim_fixdb exim_tidydb exim_lock \
buildlookups buildrouters buildtransports \
buildauths exim
# Targets for special-purpose configuration header builders
buildconfig: buildconfig.c
$(CC) $(CFLAGS) $(INCLUDE) -o buildconfig buildconfig.c $(LIBS)
# Target for the exicyclog utility script
exicyclog: Makefile config.h ../src/exicyclog.src
@rm -f exicyclog
sed \
-e "s?PROCESSED_FLAG?This file has been so processed.?"\
-e "/^# /p" \
-e "/^# /d" \
-e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
-e "s?CONFIGURE_FILE_USE_EUID?$(CONFIGURE_FILE_USE_EUID)?" \
-e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
-e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
-e "s?EXICYCLOG_MAX?$(EXICYCLOG_MAX)?" \
-e "s?COMPRESS_COMMAND?$(COMPRESS_COMMAND)?" \
-e "s?COMPRESS_SUFFIX?$(COMPRESS_SUFFIX)?" \
-e "s?CHOWN_COMMAND?$(CHOWN_COMMAND)?" \
-e "s?CHGRP_COMMAND?$(CHGRP_COMMAND)?" \
-e "s?MV_COMMAND?$(MV_COMMAND)?" \
-e "s?RM_COMMAND?$(RM_COMMAND)?" \
../src/exicyclog.src > exicyclog-t
@mv exicyclog-t exicyclog
@chmod a+x exicyclog
@echo ">>> exicyclog script built"; echo ""
# Target for the exinext utility script
exinext: Makefile config.h ../src/exinext.src
@rm -f exinext
sed \
-e "s?PROCESSED_FLAG?This file has been so processed.?"\
-e "/^# /p" \
-e "/^# /d" \
-e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
-e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
-e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
../src/exinext.src > exinext-t
@mv exinext-t exinext
@chmod a+x exinext
@echo ">>> exinext script built"; echo ""
# Target for the exiwhat utility script
exiwhat: Makefile config.h ../src/exiwhat.src
@rm -f exiwhat
sed \
-e "s?PROCESSED_FLAG?This file has been so processed.?"\
-e "/^# /p" \
-e "/^# /d" \
-e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
-e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
-e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
-e "s?EXIWHAT_PS_CMD?$(EXIWHAT_PS_CMD)?" \
-e "s?EXIWHAT_PS_ARG?$(EXIWHAT_PS_ARG)?" \
-e "s?EXIWHAT_KILL_SIGNAL?$(EXIWHAT_KILL_SIGNAL)?" \
-e "s?EXIWHAT_EGREP_ARG?$(EXIWHAT_EGREP_ARG)?" \
-e "s?EXIWHAT_MULTIKILL_CMD?$(EXIWHAT_MULTIKILL_CMD)?" \
-e "s?EXIWHAT_MULTIKILL_ARG?$(EXIWHAT_MULTIKILL_ARG)?" \
../src/exiwhat.src > exiwhat-t
@mv exiwhat-t exiwhat
@chmod a+x exiwhat
@echo ">>> exiwhat script built"; echo ""
# Target for the exim_checkaccess utility script
exim_checkaccess: Makefile config.h ../src/exim_checkaccess.src
@rm -f exim_checkaccess
sed \
-e "s?PROCESSED_FLAG?This file has been so processed.?"\
-e "/^# /p" \
-e "/^# /d" \
-e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
-e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
-e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
-e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
../src/exim_checkaccess.src > exim_checkaccess-t
@mv exim_checkaccess-t exim_checkaccess
@chmod a+x exim_checkaccess
@echo ">>> exim_checkaccess script built"; echo ""
# Target for the Exim monitor start-up script
eximon: Makefile config.h ../src/eximon.src ../OS/eximon.conf-Default \
../Local/eximon.conf
@rm -f eximon
$(SHELL) $(SCRIPTS)/Configure-eximon
sed \
-e "s?PROCESSED_FLAG?This file has been so processed.?"\
-e "/^# /p" \
-e "/^# /d" \
-e "s?CONFIGURE_FILE_USE_NODE?$(CONFIGURE_FILE_USE_NODE)?" \
-e "s?CONFIGURE_FILE?$(CONFIGURE_FILE)?" \
-e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
-e "s?BASENAME_COMMAND?$(BASENAME_COMMAND)?" \
-e "s?HOSTNAME_COMMAND?$(HOSTNAME_COMMAND)?" \
-e "s?X11_LD_LIBRARY?$(X11_LD_LIB)?" \
../src/eximon.src >> eximon
@echo ">>> eximon script built"; echo ""
# Targets for utilities; these are all Perl scripts that have to get the
# location of Perl put in them. A few need other things as well.
exigrep: Makefile ../src/exigrep.src
@rm -f exigrep
sed \
-e "s?PROCESSED_FLAG?This file has been so processed.?"\
-e "/^# /p" \
-e "/^# /d" \
-e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
-e "s?ZCAT_COMMAND?$(ZCAT_COMMAND)?" \
-e "s?COMPRESS_SUFFIX?$(COMPRESS_SUFFIX)?" \
../src/exigrep.src > exigrep-t
@mv exigrep-t exigrep
@chmod a+x exigrep
@echo ">>> exigrep script built"; echo ""
eximstats: Makefile ../src/eximstats.src
@rm -f eximstats
sed \
-e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
../src/eximstats.src > eximstats-t
@mv eximstats-t eximstats
@chmod a+x eximstats
@echo ">>> eximstats script built"; echo ""
exiqgrep: Makefile ../src/exiqgrep.src
@rm -f exiqgrep
sed \
-e "s?PROCESSED_FLAG?This file has been so processed.?"\
-e "/^# /p" \
-e "/^# /d" \
-e "s?BIN_DIRECTORY?$(BIN_DIRECTORY)?" \
-e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
../src/exiqgrep.src > exiqgrep-t
@mv exiqgrep-t exiqgrep
@chmod a+x exiqgrep
@echo ">>> exiqgrep script built"; echo ""
exiqsumm: Makefile ../src/exiqsumm.src
@rm -f exiqsumm
sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
../src/exiqsumm.src > exiqsumm-t
@mv exiqsumm-t exiqsumm
@chmod a+x exiqsumm
@echo ">>> exiqsumm script built"; echo ""
exipick: Makefile ../src/exipick.src
@rm -f exipick
sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
-e "s?SPOOL_DIRECTORY?$(SPOOL_DIRECTORY)?" \
../src/exipick.src > exipick-t
@mv exipick-t exipick
@chmod a+x exipick
@echo ">>> exipick script built"; echo ""
transport-filter.pl: Makefile ../src/transport-filter.src
@rm -f transport-filter.pl
sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
../src/transport-filter.src > transport-filter.pl-t
@mv transport-filter.pl-t transport-filter.pl
@chmod a+x transport-filter.pl
@echo ">>> transport-filter.pl script built"; echo ""
convert4r3: Makefile ../src/convert4r3.src
@rm -f convert4r3
sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
../src/convert4r3.src > convert4r3-t
@mv convert4r3-t convert4r3
@chmod a+x convert4r3
@echo ">>> convert4r3 script built"; echo ""
convert4r4: Makefile ../src/convert4r4.src
@rm -f convert4r4
sed -e "s?PERL_COMMAND?$(PERL_COMMAND)?" \
../src/convert4r4.src > convert4r4-t
@mv convert4r4-t convert4r4
@chmod a+x convert4r4
@echo ">>> convert4r4 script built"; echo ""
# Targets for final binaries; the main one has a build number which is
# updated each time. We don't bother with that for the auxiliaries.
OBJ_EXIM = acl.o child.o crypt16.o daemon.o dbfn.o debug.o deliver.o \
directory.o dns.o drtables.o enq.o exim.o expand.o filter.o \
filtertest.o globals.o \
header.o host.o ip.o log.o lss.o match.o moan.o \
os.o parse.o queue.o \
rda.o readconf.o receive.o retry.o rewrite.o rfc2047.o \
route.o search.o sieve.o smtp_in.o smtp_out.o spool_in.o spool_out.o \
store.o string.o tls.o tod.o transport.o tree.o verify.o \
local_scan.o $(EXIM_PERL)
exim: pcre/libpcre.a lookups/lookups.a auths/auths.a \
routers/routers.a transports/transports.a \
$(OBJ_EXIM) version.c
@echo " "
awk '{ print ($$1+1) }' cnumber.h > cnumber.temp
rm -f cnumber.h; mv cnumber.temp cnumber.h
$(CC) -c $(CFLAGS) $(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE) version.c
rm -f exim
$(PURIFY) $(LNCC) -o exim $(LFLAGS) $(OBJ_EXIM) version.o \
pcre/libpcre.a \
routers/routers.a transports/transports.a lookups/lookups.a \
auths/auths.a \
$(LIBRESOLV) $(LIBS) $(LIBS_EXIM) $(IPV6_LIBS) $(EXTRALIBS) \
$(EXTRALIBS_EXIM) $(DBMLIB) $(LOOKUP_LIBS) $(AUTH_LIBS) \
$(PERL_LIBS) $(TLS_LIBS)
@if [ x"$(STRIP_COMMAND)" != x"" ]; then \
echo $(STRIP_COMMAND) exim; \
$(STRIP_COMMAND) exim; \
fi
$(EXIM_CHMOD)
@echo " "
@echo ">>> exim binary built"
@echo " "
# The utility for dumping the contents of an exim database
OBJ_DUMPDB = exim_dumpdb.o util-os.o util-store.o
exim_dumpdb: $(OBJ_DUMPDB)
$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_dumpdb $(LFLAGS) $(OBJ_DUMPDB) \
$(LIBS) $(EXTRALIBS) $(DBMLIB)
@if [ x"$(STRIP_COMMAND)" != x"" ]; then \
echo $(STRIP_COMMAND) exim_dumpdb; \
$(STRIP_COMMAND) exim_dumpdb; \
fi
@echo " "
@echo ">>> exim_dumpdb utility built"
@echo " "
# The utility for interrogating/fixing the contents of an exim database
OBJ_FIXDB = exim_fixdb.o util-os.o util-store.o
exim_fixdb: $(OBJ_FIXDB)
$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_fixdb $(LFLAGS) $(OBJ_FIXDB) \
$(LIBS) $(EXTRALIBS) $(DBMLIB)
@if [ x"$(STRIP_COMMAND)" != x"" ]; then \
echo $(STRIP_COMMAND) exim_fixdb; \
$(STRIP_COMMAND) exim_fixdb; \
fi
@echo " "
@echo ">>> exim_fixdb utility built"
@echo " "
# The utility for tidying the contents of an exim database
OBJ_TIDYDB = exim_tidydb.o util-os.o util-store.o
exim_tidydb: $(OBJ_TIDYDB)
$(LNCC) $(CFLAGS) $(INCLUDE) -o exim_tidydb $(LFLAGS) $(OBJ_TIDYDB) \
$(LIBS) $(EXTRALIBS) $(DBMLIB)
@if [ x"$(STRIP_COMMAND)" != x"" ]; then \
echo $(STRIP_COMMAND) exim_tidydb; \
$(STRIP_COMMAND) exim_tidydb; \
fi
@echo " "
@echo ">>> exim_tidydb utility built"
@echo " "
# The utility for building dbm files
exim_dbmbuild: exim_dbmbuild.o
$(LNCC) -o exim_dbmbuild $(LFLAGS) exim_dbmbuild.o \
$(LIBS) $(EXTRALIBS) $(DBMLIB)
@if [ x"$(STRIP_COMMAND)" != x"" ]; then \
echo $(STRIP_COMMAND) exim_dbmbuild; \
$(STRIP_COMMAND) exim_dbmbuild; \
fi
@echo " "
@echo ">>> exim_dbmbuild utility built"
@echo " "
# The utility for locking a mailbox while messing around with it
exim_lock: exim_lock.c
$(CC) -c $(CFLAGS) $(INCLUDE) exim_lock.c
$(LNCC) -o exim_lock $(LFLAGS) exim_lock.o \
$(LIBS) $(EXTRALIBS)
@if [ x"$(STRIP_COMMAND)" != x"" ]; then \
echo $(STRIP_COMMAND) exim_lock; \
$(STRIP_COMMAND) exim_lock; \
fi
@echo " "
@echo ">>> exim_lock utility built"
@echo " "
# The X-based Exim monitor program's binary part. There's a macro for cutting
# out the modified TextPop module, because some antique link editors cannot
# handle the fact that it is redefining things that are found later in the
# Xaw library.
# Object modules that are the unique Eximon modules
MONBIN = em_StripChart.o $(EXIMON_TEXTPOP) em_globals.o em_init.o \
em_log.o em_main.o em_menu.o em_queue.o em_strip.o \
em_text.o em_xs.o
# The complete modules list also includes some specially compiled versions of
# code from the main Exim source tree.
OBJ_MONBIN = util-spool_in.o util-store.o util-string.o tod.o tree.o $(MONBIN)
eximon.bin: $(EXIMON_EDITME) eximon $(OBJ_MONBIN) pcre/libpcre.a \
../exim_monitor/em_version.c
$(CC) -o em_version.o -c \
$(CFLAGS) $(XINCLUDE) -I. ../exim_monitor/em_version.c
$(PURIFY) $(LNCC) -o eximon.bin em_version.o $(LFLAGS) $(XLFLAGS) \
$(OBJ_MONBIN) -lXaw -lXmu -lXt -lXext -lX11 pcre/libpcre.a \
$(LIBS) $(LIBS_EXIMON) $(EXTRALIBS) $(EXTRALIBS_EXIMON) -lc
@if [ x"$(STRIP_COMMAND)" != x"" ]; then \
echo $(STRIP_COMMAND) eximon.bin; \
$(STRIP_COMMAND) eximon.bin; \
fi
@echo " "
@echo ">>> exim monitor binary built"
@echo " "
# Compile step for most of the exim modules. HDRS is a list of headers
# which cause everthing to be rebuilt. PHDRS is the same, for the use
# of routers, transports, and authenticators. I can't find a way of doing this
# in one. This list is overkill, but it doesn't really take much time to
# rebuild Exim on a modern computer.
HDRS = config.h dbfunctions.h dbstuff.h exim.h functions.h globals.h local_scan.h macros.h mytypes.h structs.h
PHDRS = ../config.h ../dbfunctions.h ../dbstuff.h ../exim.h ../functions.h ../globals.h ../local_scan.h ../macros.h ../mytypes.h ../structs.h
.SUFFIXES: .o .c
.c.o:; $(CC) -c $(CFLAGS) -I. $(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE) $*.c
# This is the dummy module for use by test compiles of individual modules. It
# contains functions such as log_write() that may be called from bits of Exim
# in the tested code.
dummies.o: dummies.c
# Compile instructions for perl.o for when EXIM_PERL is set
perl.o: $(HDRS) perl.c
$(PERL_CC) $(PERL_CCOPTS) $(INCLUDE) -c perl.c
# Compile instructions for the database utility modules
exim_dumpdb.o: $(HDRS) exim_dbutil.c
$(CC) -c $(CFLAGS) $(INCLUDE) \
-DCOMPILE_UTILITY \
-DEXIM_DUMPDB \
-o exim_dumpdb.o exim_dbutil.c
exim_fixdb.o: $(HDRS) exim_dbutil.c
$(CC) -c $(CFLAGS) $(INCLUDE) \
-DCOMPILE_UTILITY \
-DEXIM_FIXDB \
-o exim_fixdb.o exim_dbutil.c
exim_tidydb.o: $(HDRS) exim_dbutil.c
$(CC) -c $(CFLAGS) $(INCLUDE) \
-DCOMPILE_UTILITY \
-DEXIM_TIDYDB \
-o exim_tidydb.o exim_dbutil.c
# Compile instructions for exim_dbmbuild
exim_dbmbuild.o: $(HDRS) exim_dbmbuild.c
$(CC) -c $(CFLAGS) $(INCLUDE) -o exim_dbmbuild.o exim_dbmbuild.c
# Utilities use special versions of some modules - typically with debugging
# calls cut out.
util-spool_in.o: $(HDRS) spool_in.c
$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-spool_in.o spool_in.c
util-store.o: $(HDRS) store.c
$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-store.o store.c
util-string.o: $(HDRS) string.c
$(CC) -c $(CFLAGS) $(INCLUDE) -DCOMPILE_UTILITY -o util-string.o string.c
util-os.o: $(HDRS) os.c
$(CC) -c $(CFLAGS) $(INCLUDE) \
-DCOMPILE_UTILITY \
-DOS_LOAD_AVERAGE \
-DFIND_RUNNING_INTERFACES \
-o util-os.o os.c
# The local scan module depends only on its own special header, and is compiled
# from a source whose location is set by configuration.
local_scan.o: Makefile local_scan.h ../$(LOCAL_SCAN_SOURCE)
$(CC) -c $(CFLAGS) -I. $(INCLUDE) -o local_scan.o ../$(LOCAL_SCAN_SOURCE)
# Dependencies for the "ordinary" exim modules
acl.o: $(HDRS) acl.c
child.o: $(HDRS) child.c
crypt16.o: $(HDRS) crypt16.c
daemon.o: $(HDRS) daemon.c
dbfn.o: $(HDRS) dbfn.c
debug.o: $(HDRS) debug.c
deliver.o: $(HDRS) deliver.c
directory.o: $(HDRS) directory.c
dns.o: $(HDRS) dns.c
enq.o: $(HDRS) enq.c
exim.o: $(HDRS) exim.c
expand.o: $(HDRS) expand.c
filter.o: $(HDRS) filter.c
filtertest.o: $(HDRS) filtertest.c
globals.o: $(HDRS) globals.c
header.o: $(HDRS) header.c
host.o: $(HDRS) host.c
ip.o: $(HDRS) ip.c
log.o: $(HDRS) log.c
lss.o: $(HDRS) lss.c
match.o: $(HDRS) match.c
moan.o: $(HDRS) moan.c
os.o: $(HDRS) os.c
parse.o: $(HDRS) parse.c
queue.o: $(HDRS) queue.c
rda.o: $(HDRS) rda.c
readconf.o: $(HDRS) readconf.c
receive.o: $(HDRS) receive.c
retry.o: $(HDRS) retry.c
rewrite.o: $(HDRS) rewrite.c
rfc2047.o: $(HDRS) rfc2047.c
route.o: $(HDRS) route.c
search.o: $(HDRS) search.c
sieve.o: $(HDRS) sieve.c
smtp_in.o: $(HDRS) smtp_in.c
smtp_out.o: $(HDRS) smtp_out.c
spool_in.o: $(HDRS) spool_in.c
spool_out.o: $(HDRS) spool_out.c
store.o: $(HDRS) store.c
string.o: $(HDRS) string.c
tls.o: $(HDRS) tls.c tls-gnu.c tls-openssl.c
tod.o: $(HDRS) tod.c
transport.o: $(HDRS) transport.c
tree.o: $(HDRS) tree.c
verify.o: $(HDRS) verify.c
# The module containing tables of available lookups, routers, auths, and
# transports must be rebuilt if any of them are. However, because the makefiles
# for the drivers are always run, we don't actually put the dependencies here,
# because if we do, some version of "make" (e.g. IRIX) insist on rebuilding
# drtables.o even though the .a files haven't in fact been updated. Instead
# it is arranged that the lower-level makefiles remove drtables.o when they
# rebuild the .a files.
drtables.o: $(HDRS) drtables.c
# The exim monitor's private modules - the sources live in a private
# subdirectory. The final binary combines the private modules with some
# modules from the main exim binary.
em_StripChart.o: ../exim_monitor/em_StripChart.c
em_TextPop.o: ../exim_monitor/em_TextPop.c
em_globals.o: ../exim_monitor/em_globals.c ../exim_monitor/em_hdr.h
em_init.o: ../exim_monitor/em_init.c ../exim_monitor/em_hdr.h
em_log.o: ../exim_monitor/em_log.c ../exim_monitor/em_hdr.h
em_main.o: ../exim_monitor/em_main.c ../exim_monitor/em_hdr.h
em_menu.o: ../exim_monitor/em_menu.c ../exim_monitor/em_hdr.h
em_queue.o: ../exim_monitor/em_queue.c ../exim_monitor/em_hdr.h
em_strip.o: ../exim_monitor/em_strip.c ../exim_monitor/em_hdr.h
em_text.o: ../exim_monitor/em_text.c ../exim_monitor/em_hdr.h
em_xs.o: ../exim_monitor/em_xs.c ../exim_monitor/em_hdr.h
em_version.o: ../exim_monitor/em_version.c ../exim_monitor/em_hdr.h
$(MONBIN): $(HDRS)
$(CC) -o $@ -c $(CFLAGS) -I. -I../exim_monitor $(INCLUDE) $(XINCLUDE) \
../exim_monitor/`echo $@ | sed 's/o$$/c/'`
# Targets for the various libraries that Exim uses. This coding is tedious,
# because different versions of "make" behave in different ways with regard
# to rebuilding. If these target names are of the form pcre/libpcre.a, for
# example, then a forcing mechanism is required to get them obeyed each time.
# That's fine on Solaris and other systems; the rebuilding of the exim target
# happens only if the libraries are actually rebuilt. However, on IRIX, if
# the target is forced, the exim target gets unnecessarily rebuilt even if
# the .a file is not. Contrariwise, if we use dummy names, they don't interact
# with the building of exim (and eximon.bin), but for libpcre Exim doesn't get
# rebuilt when it should. (For the others it does, because they remove
# drtables.o when they rebuild.) To get round this, we forcibly remove the
# binary when it needs to be rebuilt.
# The PCRE regex library. Move the pcretest program to the util directory. Some
# "clever" versions of make notice that there are two successive shell
# commands, and they run them in the same shell. This means that we have to
# take care to encapsulate change of directory in parentheses, so that it
# reverts when it should.
buildpcre:
@(cd pcre; $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" \
CFLAGS="$(CFLAGS) $(PCRE_CFLAGS)" \
RANLIB="$(RANLIB)" HDRS="$(PHDRS)" \
INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)")
@if $(SHELL) $(SCRIPTS)/newer pcre/libpcre.a exim; then \
rm -f exim eximon.bin; fi
# The lookups library.
buildlookups:
@cd lookups; $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
RANLIB="$(RANLIB)" HDRS="$(PHDRS)" \
INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE) $(LOOKUP_INCLUDE)"; \
echo " "
# The routers library.
buildrouters:
@cd routers; $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
RANLIB="$(RANLIB)" HDRS="$(PHDRS)" \
INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"; \
echo " "
# The transports library.
buildtransports:
@cd transports; $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
RANLIB="$(RANLIB)" HDRS="$(PHDRS)" \
INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"; \
echo " "
# The library of authorization modules
buildauths:
@cd auths; $(MAKE) SHELL=$(SHELL) AR="$(AR)" $(MFLAGS) CC="$(CC)" CFLAGS="$(CFLAGS)" \
RANLIB="$(RANLIB)" HDRS="$(PHDRS)" \
INCLUDE="$(INCLUDE) $(IPV6_INCLUDE) $(TLS_INCLUDE)"; \
echo " "
# The "clean", "install", and "makefile" targets just pass themselves back to
# the main Exim makefile. These targets will be obeyed only if "make" is obeyed
# for them in the build directory.
clean install makefile:; cd ..; $(MAKE) $(MFLAGS) build=$(build) $@
# Targets for building stand-alone testing programs for basic testing of
# some of the building blocks. These are not integrated with the makefile-
# building targets. If you change something that is going to cause the
# makefile to be rebuilt, you must run "make makefile" before running one
# of these.
# The testing programs use different versions of some modules - usually
# with bits cut out that are not relevant to the test in hand. For those
# that are used by several tests, we use a different name.
sa-globals.o: $(HDRS) globals.c
$(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -o sa-globals.o globals.c
sa-os.o: $(HDRS) os.c
$(CC) -c $(CFLAGS) $(INCLUDE) \
-DFIND_RUNNING_INTERFACES \
-o sa-os.o os.c
# These are the test targets themselves
test_dbfn: config.h dbfn.c dummies.o sa-globals.o sa-os.o store.o \
string.o tod.o version.o
$(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE dbfn.c
$(LNCC) -o test_dbfn $(LFLAGS) dbfn.o \
dummies.o sa-globals.o sa-os.o store.o string.o \
tod.o version.o $(LIBS) $(DBMLIB)
rm -f dbfn.o
test_host: config.h host.c dns.c dummies.o sa-globals.o sa-os.o store.o \
string.o tod.o tree.o
$(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST host.c
$(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST dns.c
$(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE -DTEST_HOST dummies.c
$(LNCC) -o test_host $(LFLAGS) \
host.o dns.o dummies.o sa-globals.o os.o store.o string.o tod.o tree.o \
$(LIBS) $(LIBRESOLV)
rm -f dummies.o host.o dns.o
test_os: os.h os.c dummies.o sa-globals.o store.o string.o tod.o
$(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE os.c
$(LNCC) -o test_os $(LFLAGS) os.o dummies.o \
sa-globals.o store.o string.o tod.o $(LIBS)
rm -f os.o
test_parse: config.h parse.c dummies.o sa-globals.o \
store.o string.o tod.o version.o
$(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE parse.c
$(LNCC) -o test_parse $(LFLAGS) parse.o \
dummies.o sa-globals.o store.o string.o tod.o version.o
rm -f parse.o
test_string: config.h string.c dummies.o sa-globals.o store.o tod.o
$(CC) -c $(CFLAGS) $(INCLUDE) -DSTAND_ALONE string.c
$(LNCC) -o test_string $(LFLAGS) -DSTAND_ALONE string.o \
dummies.o sa-globals.o store.o tod.o $(LIBS)
rm -f string.o
# End
Index: Makefile-CYGWIN
====================================================================
# $Cambridge: exim/exim-src/OS/Makefile-CYGWIN,v 1.1 2004/10/06 15:07:39 ph10 Exp $
# OS-specific file for Cygwin.
# This file provided by Pierre A. Humblet <Pierre.Humblet@???>
HAVE_ICONV = yes
CFLAGS= -g -Wall -O2
LIBS= -lcrypt -lresolv
LIBS_EXIM= -liconv
EXIWHAT_PS_ARG=-as
EXIWHAT_KILL_SIGNAL=-USR1
EXIWHAT_EGREP_ARG='/(EXIM|exim)[0-9. -]*$$'
DBMLIB=-lgdbm
USE_GDBM=YES
# Some OS add a suffix to executables
EXE = .exe
# To add a resource file with an icon
LIBS_EXIM +=../Local/exim_res.o
# To produce a linker map
#LIBS_EXIM+=-Wl,-Map,Exim.Map
##################################################
# The following is normaly set in local/Makefile.
# Makefile.cygwin provides defaults with which the
# precompiled version is built
##################################################
BIN_DIRECTORY=/usr/bin
CONFIGURE_FILE=/etc/exim.conf
EXIM_USER=18 # This changes if user exim exists
EXIM_GROUP=544 # Administrators
SPOOL_DIRECTORY=/var/spool/exim
LOG_FILE_PATH=/var/log/exim/exim_%s.log
TIMEZONE_DEFAULT = ""
AUTH_CRAM_MD5=yes
AUTH_PLAINTEXT=yes
AUTH_SPA=yes
SUPPORT_TLS=yes
TLS_LIBS=-lssl -lcrypto
ROUTER_ACCEPT=yes
ROUTER_DNSLOOKUP=yes
ROUTER_IPLITERAL=yes
ROUTER_MANUALROUTE=yes
ROUTER_QUERYPROGRAM=yes
ROUTER_REDIRECT=yes
TRANSPORT_APPENDFILE=yes
TRANSPORT_AUTOREPLY=yes
TRANSPORT_PIPE=yes
TRANSPORT_SMTP=yes
SUPPORT_MAILDIR=yes
SUPPORT_MAILSTORE=yes
SUPPORT_MBX=yes
LOOKUP_DBM=yes
LOOKUP_LSEARCH=yes
# LOOKUP_CDB=yes
LOOKUP_DNSDB=yes
# LOOKUP_DSEARCH=yes
# LOOKUP_LDAP=yes
# LOOKUP_MYSQL=yes
# LOOKUP_NIS=yes
# LOOKUP_NISPLUS=yes
# LOOKUP_ORACLE=yes
LOOKUP_PASSWD=yes
# LOOKUP_PGSQL=yes
# LOOKUP_WHOSON=yes
# It is important to define this variable but its value is always overridden
CONFIGURE_OWNER=544
EXICYCLOG_MAX=10
COMPRESS_COMMAND=/usr/bin/gzip
COMPRESS_SUFFIX=gz
ZCAT_COMMAND=/usr/bin/zcat
# EXIM_PERL=perl.o
# Comment the two lines below if you do not have PAM, e.g. from
#
ftp://ftp.uni-erlangen.de/pub/pc/gnuwin32/cygwin/porters/Humblet_Pierre_A
SUPPORT_PAM=yes
CFLAGS += -DINCLUDE_PAM -I ../pam -I ../../pam
APPENDFILE_MODE = 0644 # default if no ntsec
APPENDFILE_DIRECTORY_MODE = 0777
APPENDFILE_LOCKFILE_MODE = 0666
EXIMDB_DIRECTORY_MODE = 0777
EXIMDB_MODE = 0666
EXIMDB_LOCKFILE_MODE = 0666
INPUT_DIRECTORY_MODE = 0777
LOG_DIRECTORY_MODE = 0777
LOG_MODE = 0666
MSGLOG_DIRECTORY_MODE = 0777
SPOOL_DIRECTORY_MODE = 0777
SPOOL_MODE = 0666
# PERL_CC=gcc -g -O2 -I ../minires
# PERL_CCOPTS= -dD -save-temps -I ../minires
# PERL_LIBS = /usr/lib/perl5/5.6.1/cygwin-multi/auto/DynaLoader/DynaLoader.a -L/usr/lib/perl5/5.6.1/cygwin-multi/CORE -llibperl5_6_1
# End
Index: Makefile-DGUX
====================================================================
# $Cambridge: exim/exim-src/OS/Makefile-DGUX,v 1.1 2004/10/06 15:07:39 ph10 Exp $
# Exim: OS-specific make file for DGUX
#
# Written by Ken Bailey (K.Bailey@???) Feb 1998
# on dgux R4.11MU04 generic AViiON mc88100
# with no X
# Minor tidies to remove settings that are actually the default,
# in line with the style of other system files - PH.
BASENAME_COMMAND=/bin/basename
CHOWN_COMMAND=/bin/chown
CHGRP_COMMAND=/bin/chgrp
# PERL
# Perl is not necessary for running Exim itself, but some Perl utilities
# are provided for processing the logs. Perl 5 is assumed.
# DG ship perl version 4.036 in /bin/perl so need to use locally installed perl
PERL_COMMAND=/usr/local/bin/perl
# dg's version of gcc likes O2
CFLAGS=-O2
RANLIB=@true
LIBS=-lsocket -lnsl
LIBRESOLV=-lresolv
DBMLIB=-ldbm
# End
Index: Makefile-Darwin
====================================================================
# $Cambridge: exim/exim-src/OS/Makefile-Darwin,v 1.1 2004/10/06 15:07:39 ph10 Exp $
# Exim: OS-specific make file for Darwin (Mac OS X).
CC=cc
BASENAME_COMMAND=look_for_it
CHOWN_COMMAND=/usr/sbin/chown
HAVE_SA_LEN=YES
CFLAGS=-O -no-cpp-precomp -DBIND_8_COMPAT
USE_DB = yes
DBMLIB =
X11=/usr/X11R6
XINCLUDE=-I$(X11)/include
XLFLAGS=-L$(X11)/lib
X11_LD_LIB=$(X11)/lib
EXIWHAT_PS_ARG=ax
EXIWHAT_EGREP_ARG='/exim( |$$)'
EXIWHAT_KILL_SIGNAL=-USR1
# End
Index: Makefile-Default
====================================================================
# $Cambridge: exim/exim-src/OS/Makefile-Default,v 1.1 2004/10/06 15:07:39 ph10 Exp $
##################################################
# The Exim mail transport agent #
##################################################
# Generic default make file containing settings that relate to the OS or
# to selectable features within the OS. The configuration options for Exim
# itself live in Local/Makefile, which is constructed by editing src/EDITME.
# These settings are basic defaults which may be overridden, either by the
# generic OS-specific files, or by site-specific files. Do not edit this file.
# Instead, edit or create suitable OS-specific and/or site specific files.
# See the manual for details.
# MAKE_SHELL contains the name of the shell to be used for executing commands
# from the make files. Normally /bin/sh should be used.
MAKE_SHELL=/bin/sh
# BASENAME_COMMAND contains the path to the "basename" command, which varies
# from OS to OS. This is used when building the Exim monitor script only. (See
# also HOSTNAME_COMMAND.) If BASENAME_COMMAND is set to "look_for_it" then the
# script checks for /usr/bin/basename and /bin/basename, and if neither is
# found, it uses /usr/ucb/basename. This copes with Solaris 2 and Linux, both
# of which come in different versions.
BASENAME_COMMAND=/usr/bin/basename
# If you set STRIP_COMMAND to the path of the "strip" command, it will be run
# on every binary that is built. It is left unset by default, which leaves
# the binaries unstripped.
# STRIP_COMMAND=/usr/bin/strip
# Some of the following commands live in different places in different OS. We
# include them all here for generality.
CHOWN_COMMAND=/usr/bin/chown
CHGRP_COMMAND=/usr/bin/chgrp
MV_COMMAND=/bin/mv
RM_COMMAND=/bin/rm
# Some operating systems have different ways of building libraries of
# functions. This macro defines the command to do this, defaulting to
# the "ar" command with options "cq".
AR=ar cq
# Not all operating systems have the iconv() function. Those that do have
#
# HAVE_ICONV=yes
#
# in their OS-specific Makefiles. On those that don't it is possible to
# install an independent implementation of iconv(). If you've done this,
# add "HAVE_ICONV=yes" to your Local/Makefile.
# Perl is not necessary for running Exim itself, except when EXIM_PERL
# is set to cause Perl embedding. However, some Perl utilities are provided
# for processing the logs. Perl 5 is assumed.
PERL_COMMAND=/usr/bin/perl
# CC contains the name of the C compiler to be used.
CC=gcc
# CFLAGS contains flags to be passed to the compiler. Nothing is defaulted
# here; instead each OS-dependent Makefile contains a default setting.
# CFLAGS=-O
# LFLAGS contains flags to be passed to the link editor. Nothing is defaulted
# here; instead each OS-dependent Makefile contains a default setting if one
# is needed.
# LFLAGS=
# LIBS and EXTRALIBS contain library settings that are used on linking
# commands to build binaries. The OS-dependent Makefile may contain a default
# setting for LIBS, leaving EXTRALIBS available for adding further libraries
# that are required for optional extras.
# LIBS=
# EXTRALIBS=
# LIBS_EXIM and EXTRALIBS_EXIM contain library settings that are used
# only when linking the Exim binary. They are not used for other binaries.
# One possible use is for the TCP wrappers library.
# LIBS_EXIM=
# EXTRALIBS_EXIM=
# LIBS_EXIMON and EXTRALIBS_EXIMON contain library settings that are
# used only when linking the Exim monitor binary. They are not used for
# other binaries.
# LIBS_EXIMON=
# EXTRALIBS_EXIMON=
# PCRE_CFLAGS contains flags to be passed to the CFLAGS parameter of the
# makefile for building the PCRE regular expression library, in addition
# to CFLAGS. Typical use is to set -DUSE_BCOPY on legacy systems that lack
# the memmove() function but do have bcopy().
# PCRE_CFLAGS=
# The error name for quota exceeded varies among operating systems, and
# even, unfortunately, in different versions of the same operating system.
# EDQUOT was not in Sys V, but is in SPEC 1170, apparently. It was used
# in SunOS4, but got taken out for SunOS5, where ENOSPC was given if a quota
# was exceeded. However, it got put back into SunOS5 with a patch to 5.4 in
# order to comply with SPEC 1170. Thus even different patch levels of the same
# system (SunOS5) may use different numbers.
#
# If you don't have quotas or are not interested in handling quota errors
# specially, just set this variable to 0. If it is not set, it defaults to
# EDQUOT if that is defined for the OS; otherwise it defaults to ENOSPC.
# ERRNO_QUOTA=EDQUOT
# The exiwhat utility script finds all the processes running Exim, and sends
# them a SIGUSR1 signal to get them to write their status to a file. There are
# two ways in which this can be done:
#
# (1) If the OS has a command to find processes and signal them, that can be
# used. Linux has "killall"; Solaris has "pkill". (Note: "killall" on Solaris
# does something very different - and disastrous.) The following are set in the
# OS-specific Makefiles for those OS where this can be done:
# EXIWHAT_MULTIKILL_CMD=
# EXIWHAT_MULTIKILL_ARG=
# (2) For other operating systems, exiwhat calls the ps command and egreps the
# output in order to find all the processes running Exim. The arguments for the
# various commands needed to do this vary from OS to OS. These defaults work on
# Solaris 2, HPUX, and IRIX. The OS-specific Makefiles have different versions
# for other systems, and you can override with your own requirements in your
# private Makefiles in the Local directory. The most commonly found
# alternatives are -ax instead of -e for the ps argument, and / instead of a
# blank before the name exim for the egrep argument on systems whose ps output
# shows the full path name. The quotes for the egrep argument are specified
# here so that leading white space can be used. This value should always be
# given in single quotes.
EXIWHAT_PS_CMD=/bin/ps
EXIWHAT_PS_ARG=-e
EXIWHAT_EGREP_ARG=' exim( |$$|-)'
# For both kinds of exiwhat usage, the next setting specifies the signal that
# is sent.
EXIWHAT_KILL_SIGNAL=-USR1
# IPv6 is coming. Exim has experimental support that has been tried out on
# one or two OS. See the file README.IPV6 for the current status of this
# support. Do not set this option unless you are working on IPv6 and know
# what you are doing. As well as the basic enabling option, there are
# parameters for include and library directories that may be needed for IPv6
# on some systems.
# HAVE_IPV6=YES
# IPV6_INCLUDE=-I /usr/ipv6/include
# IPV6_LIBS=-L/usr/ipv6/libs -linet6
# Setting this brings in support for A6 DNS records for IPV6. These are
# now expected to be reduced to "experimental" status by the IETF, so
# the code is omitted by default.
# SUPPORT_A6=yes
# Exim uses the function getaddrinfo() for converting IPv6 addresses in text
# form to binary. Apparently some operating systems do not support this, or not
# correctly, and require the use of the function inet_pton() instead. The
# following setting enables this. Note, however, the inet_pton() has reduced
# functionality compared with getaddrinfo(). In particular, it does not
# recognize the percent convention for identifying scopes (interfaces) that is
# used by some operating systems.
# IPV6_USE_INET_PTON=yes
# HOSTNAME_COMMAND contains the path to the "hostname" command, which varies
# from OS to OS. This is used when building the Exim monitor script only. (See
# also BASENAME_COMMAND.) If HOSTNAME_COMMAND is set to "look_for_it" then the
# script checks for /usr/bin/hostname and /bin/hostname, and if neither is
# found, it uses /usr/ucb/basename. This copes with Solaris 2, which comes in
# different versions.
HOSTNAME_COMMAND=/bin/hostname
# INCLUDE contains arbitrary include parameters that you may need to use
# when building exim. It is added to every compile command.
# INCLUDE=-I /some/special/include-directory
# Some OS require a separate library to be quoted when linking programs that
# call name resolver functions. This can be set in LIBRESOLV, which is left
# unset here, but is set is some of the OS-specific Makefiles.
# LIBRESOLV=
# Additional libraries and include directories may be required for some
# lookup styles, e.g. LDAP or SQL. LOOKUP_LIBS is included only on the
# command for linking Exim itself, not on any auxiliary programs. You
# don't need to set LOOKUP_INCLUDE if the relevant directories are already
# specified in INCLUDE.
# LOOKUP_INCLUDE=-I /usr/local/ldap/include -I /usr/local/sql/include
# LOOKUP_LIBS=-L/usr/local/lib -lldap -llber
# RANLIB should be set to something that does nothing on systems that do not
# have the ranlib command or do not need to run it on library files.
RANLIB=ranlib
# EXIM_CHMOD is available to specify a command that is automatically applied
# to the Exim binary immediately it is compiled. (I find this useful when
# building test versions.)
EXIM_CHMOD=@true
# LOCAL_SCAN_SOURCE defines the file in which the function local_scan() is
# defined. This provides the administrator with a hook for including C code
# for scanning incoming mails. The path that is defined must be relative to
# the Exim distribution directory. For example
# LOCAL_SCAN_SOURCE=Local/local_scan.c
# The default setting points to a template function that doesn't actually do
# any scanning, but just accepts the message.
LOCAL_SCAN_SOURCE=src/local_scan.c
# If you want to specify options for your local_scan() that can be set from
# the main Exim configuration file, you need to uncomment the following line,
# and then provide a table of options in your local_scan() source, as described
# in the reference manual.
# LOCAL_SCAN_HAS_OPTIONS=yes
#############################################################################
# The following are all concerned with configuring the way Exim handles its
# database (hints) and other dbm files.
# Some systems require a separate library to be supplied when linking programs
# that make use of DBM library calls. This can be set in DBMLIB, which is unset
# by default, but is set in some of the OS-specific Makefiles. Setting it in
# your Local/Makefile will override any other setting.
# DBMLIB=
# When Exim is attempting to lock one of its database (hints) files, it
# applies a timeout which can be altered here.
# EXIMDB_LOCK_TIMEOUT=60
# By default, Exim uses traditional ndbm function calls to handle its indexed
# hints databases. On systems that have Berkeley db installed, this still
# works via the compatibility interface. However, by defining USE_DB you can
# make it use native db function calls.
# USE_DB=YES
# Similarly, if you are using gdbm, Exim will by default use the ndbm
# compatibility interface. However, by defining USE_GDBM you can make it
# use the native gdbm function calls.
# USE_GDBM=YES
#############################################################################
# The following definitions are relevant only when compiling the Exim monitor
# program, which requires an X11 display. See the varible EXIM_MONITOR in
# src/EDITME for how to suppress this compilation.
# X11 contains the location of the X11 libraries and include files.
X11=/usr/X11R6
# XINCLUDE contains options for header inclusion when compiling functions
# that call X11 functions.
XINCLUDE=-I$(X11)/include
# XLFLAGS contains flags to be passed to the linker when linking the monitor.
XLFLAGS=-L$(X11)/lib
# X11_LD_LIB contains the name of the X11 library that is to be added to
# LD_LIBRARY_PATH when running the monitor program.
X11_LD_LIB=$(X11)/lib
# A modified version of the Athena TextPop module is supplied with Exim. The
# modification is to remove the "replace" part of the "search and replace"
# operation because it isn't wanted. TextPop is only one of a number of
# modules that make up the Text widget. Some antique link editors cannot handle
# the case of a replacement module for one of a set of modules. To allow
# the monitor to be linked in such cases, set the value of EXIMON_TEXTPOP
# to be empty. The search operations will then contain a useless "replace"
# option, which is untidy, but does no harm.
EXIMON_TEXTPOP=em_TextPop.o
# End
Index: Makefile-FreeBSD
====================================================================
# $Cambridge: exim/exim-src/OS/Makefile-FreeBSD,v 1.1 2004/10/06 15:07:39 ph10 Exp $
# Exim: OS-specific make file for FreeBSD
# There's no setting of CFLAGS here, to allow the system default
# for "make" to be the default.
PORTOBJFORMAT!= test -x /usr/bin/objformat && /usr/bin/objformat || echo aout
CHOWN_COMMAND=/usr/sbin/chown
HAVE_SA_LEN=YES
# crypt() is in a separate library
LIBS=-lcrypt
# FreeBSD always ships with Berkeley DB
USE_DB=yes
# This setting changed on Sheldon Hearn's recommendation
# X11=/usr/X11R6
X11=$(X11BASE)
XINCLUDE=-I$(X11)/include
XLFLAGS=-L$(X11)/lib
.if ${PORTOBJFORMAT} == "elf"
XLFLAGS+=-Wl,-rpath,${X11BASE}/lib
.endif
X11_LD_LIB=$(X11)/lib
EXIWHAT_PS_ARG=-ax
EXIWHAT_EGREP_ARG='/exim( |$$)'
EXIWHAT_MULTIKILL_CMD='killall -m'
EXIWHAT_MULTIKILL_ARG='^exim($$|-[0-9.]+-[0-9]+$$)'
EXIWHAT_KILL_SIGNAL=-USR1
# End
Index: Makefile-GNU
====================================================================
# $Cambridge: exim/exim-src/OS/Makefile-GNU,v 1.1 2004/10/06 15:07:39 ph10 Exp $
# Exim: OS-specific make file for GNU/Hurd.
BASENAME_COMMAND=look_for_it
DBMLIB = -ldb
USE_DB = yes
LIBS = -lnsl -lcrypt
LIBRESOLV = -lresolv
CFLAGS = -O2 -g -Wall
X11=/usr/X11R6
XINCLUDE=-I$(X11)/include
XLFLAGS=-L$(X11)/lib
X11_LD_LIB=$(X11)/lib
EXIWHAT_PS_ARG=ax
EXIWHAT_EGREP_ARG='/exim( |$$)'
EXIWHAT_KILL_SIGNAL=-USR1
# End
Index: Makefile-HI-OSF
====================================================================
# $Cambridge: exim/exim-src/OS/Makefile-HI-OSF,v 1.1 2004/10/06 15:07:39 ph10 Exp $
# Exim: OS-specific make file for HI-OSF/1-MJ and HI-UX/MPP
CC=cc
CFLAGS=-O
RANLIB=@true
EXIWHAT_EGREP_ARG='/exim( |$$)'
# End
Index: Makefile-HI-UX
====================================================================
# $Cambridge: exim/exim-src/OS/Makefile-HI-UX,v 1.1 2004/10/06 15:07:39 ph10 Exp $
# Exim: OS-specific make file for HI-UX
CC=cc -Aa -D_HIUX_SOURCE
HAVE_SETRESUID=YES
HAVE_SETEUID=NO
XINCLUDE=-I/usr/include/X11R5
XLFLAGS=-L/usr/lib/X11R5
DBMLIB = -lndbm
NEED_H_ERRNO=1
RANLIB=@true
# End
Index: Makefile-HP-UX
====================================================================
# $Cambridge: exim/exim-src/OS/Makefile-HP-UX,v 1.1 2004/10/06 15:07:39 ph10 Exp $
# Exim: OS-specific make file for HP-UX later than 9
CFLAGS=-O
BASENAME_COMMAND=/bin/basename
HAVE_ICONV=yes
HAVE_SETRESUID=YES
HAVE_SETEUID=NO
XINCLUDE=-I/usr/include/X11R6 -I/usr/contrib/X11R6/include
XLFLAGS=-L/usr/lib/X11R6 -L/usr/contrib/X11R6/lib
X11_LD_LIB=/usr/contrib/X11R6/lib
EXIMON_TEXTPOP=
DBMLIB=-lndbm
RANLIB=@true
# End
Index: Makefile-HP-UX-9
====================================================================
# $Cambridge: exim/exim-src/OS/Makefile-HP-UX-9,v 1.1 2004/10/06 15:07:39 ph10 Exp $
# Exim: OS-specific make file for HP-UX 9
CFLAGS=-O
BASENAME_COMMAND=/bin/basename
HAVE_ICONV=yes
HAVE_SETRESUID=YES
HAVE_SETEUID=NO
XINCLUDE=-I/usr/include/X11R5
XLFLAGS=-L/usr/lib/X11R5 -L/usr/contrib/X11R5/lib
X11_LD_LIB=/usr/contrib/X11R5/lib
EXIMON_TEXTPOP=
DBMLIB=-lndbm
RANLIB=@true
# End
Index: Makefile-IRIX
====================================================================
# $Cambridge: exim/exim-src/OS/Makefile-IRIX,v 1.1 2004/10/06 15:07:39 ph10 Exp $
# Exim: OS-specific make file for IRIX
HAVE_ICONV=yes
BASENAME_COMMAND=/sbin/basename
HOSTNAME_COMMAND=/usr/bsd/hostname
CFLAGS=-OPT:Olimit=1500
LIBS=-lmld
XINCLUDE=-I/usr/include/X11
vfork=fork
RANLIB=@true
# End
Index: Makefile-IRIX6
====================================================================
# $Cambridge: exim/exim-src/OS/Makefile-IRIX6,v 1.1 2004/10/06 15:07:39 ph10 Exp $
# Exim: OS-specific make file for IRIX6 on 64-bit systems
HAVE_ICONV=yes
HOSTNAME_COMMAND=/usr/bsd/hostname
CFLAGS=-O2 -n32 -OPT:Olimit=4000
LFLAGS=-n32
LIBS=-lelf
XINCLUDE=-I/usr/include/X11
XLFLAGS=
vfork=fork
RANLIB=@true
# End
Index: Makefile-IRIX632
====================================================================
# $Cambridge: exim/exim-src/OS/Makefile-IRIX632,v 1.1 2004/10/06 15:07:39 ph10 Exp $
# Exim: OS-specific make file for IRIX 6 on 32-bit systems.
# There seems to be some variation. The commented settings show
# some alternatives.
HAVE_ICONV=yes
HOSTNAME_COMMAND=/usr/bsd/hostname
#CFLAGS=-OPT:Olimit=1500 -32 -mips2
CFLAGS=-32
LFLAGS=-32
#LIBS=-lmld
LIBS=-lelf
XINCLUDE=-I/usr/include/X11
vfork=fork
RANLIB=@true
# End
Index: Makefile-IRIX65
====================================================================
# $Cambridge: exim/exim-src/OS/Makefile-IRIX65,v 1.1 2004/10/06 15:07:39 ph10 Exp $
# Exim: OS-specific make file for IRIX 6.5
HAVE_ICONV=yes
HOSTNAME_COMMAND=/usr/bsd/hostname
CC=cc
CFLAGS=-O2 -OPT:Olimit=0
# CFLAGS=-O2 # override with this (in your Local/Makefile) if using gcc
LFLAGS=-Wl,-LD_MSG:off=85
LFLAGS=
# nlist has moved from libmld to libelf
LIBS=-lelf
XINCLUDE=-I/usr/include/X11
vfork=fork
RANLIB=@true
# End
Index: Makefile-Linux
====================================================================
# $Cambridge: exim/exim-src/OS/Makefile-Linux,v 1.1 2004/10/06 15:07:39 ph10 Exp $
# Exim: OS-specific make file for Linux. This is for modern Linuxes,
# which use libc6.
HAVE_ICONV=yes
BASENAME_COMMAND=look_for_it
CHOWN_COMMAND=look_for_it
CHGRP_COMMAND=look_for_it
CFLAGS=-O -D_FILE_OFFSET_BITS=64 -D_LARGEFILE_SOURCE
DBMLIB = -ldb
USE_DB = yes
LIBS = -lnsl -lcrypt
LIBRESOLV = -lresolv
X11=/usr/X11R6
XINCLUDE=-I$(X11)/include
XLFLAGS=-L$(X11)/lib
X11_LD_LIB=$(X11)/lib
EXIWHAT_PS_ARG=ax
EXIWHAT_EGREP_ARG='/exim( |$$)'
EXIWHAT_MULTIKILL_CMD=killall
EXIWHAT_MULTIKILL_ARG=exim
EXIWHAT_KILL_SIGNAL=-USR1
# End
Index: Makefile-Linux-libc5
====================================================================
# $Cambridge: exim/exim-src/OS/Makefile-Linux-libc5,v 1.1 2004/10/06 15:07:39 ph10 Exp $
# Exim: OS-specific make file for Linux systems using the old libc5
# version of the C library.
BASENAME_COMMAND=look_for_it
CHOWN_COMMAND=look_for_it
CHGRP_COMMAND=look_for_it
CFLAGS=-O
DBMLIB = -lndbm
X11=/usr/X11R6
XINCLUDE=-I$(X11)/include
XLFLAGS=-L$(X11)/lib
X11_LD_LIB=$(X11)/lib
EXIWHAT_PS_ARG=-ax
EXIWHAT_EGREP_ARG='/exim( |$$)'
EXIWHAT_KILL_SIGNAL=-USR1
# End
Index: Makefile-NetBSD
====================================================================
# $Cambridge: exim/exim-src/OS/Makefile-NetBSD,v 1.1 2004/10/06 15:07:39 ph10 Exp $
# Exim: OS-specific make file for NetBSD (ELF object format)
CHOWN_COMMAND=/usr/sbin/chown
CFLAGS=-O
HAVE_SA_LEN=YES
HAVE_IPV6=YES
LIBS=-lcrypt
X11=/usr/X11R6
XINCLUDE=-I$(X11)/include
XLFLAGS=-L$(X11)/lib
X11_LD_LIB=$(X11)/lib
EXIWHAT_PS_ARG=-ax
EXIWHAT_EGREP_ARG='/exim( |$$)'
EXIWHAT_KILL_SIGNAL=-USR1
# NetBSD always ships with Berkeley DB
USE_DB=yes
# NetBSD ELF linker needs a -R flag.
XLFLAGS+=-Wl,-R$(X11)/lib/
# End
Index: Makefile-NetBSD-a.out
====================================================================
# $Cambridge: exim/exim-src/OS/Makefile-NetBSD-a.out,v 1.1 2004/10/06 15:07:39 ph10 Exp $
# Exim: OS-specific make file for NetBSD (a.out/COFF object format)
CHOWN_COMMAND=/usr/sbin/chown
CFLAGS=-O
HAVE_SA_LEN=YES
HAVE_IPV6=YES
LIBS=-lcrypt
X11=/usr/X11R6
XINCLUDE=-I$(X11)/include
XLFLAGS=-L$(X11)/lib
X11_LD_LIB=$(X11)/lib
EXIWHAT_PS_ARG=-ax
EXIWHAT_EGREP_ARG='/exim( |$$)'
EXIWHAT_KILL_SIGNAL=-USR1
# NetBSD always ships with Berkeley DB
USE_DB=yes
# End
Index: Makefile-OSF1
====================================================================
# $Cambridge: exim/exim-src/OS/Makefile-OSF1,v 1.1 2004/10/06 15:07:39 ph10 Exp $
# Exim: OS-specific make file for OSF1
CFLAGS=-O
LIBS=-liconv
HAVE_CRYPT16=yes
HAVE_ICONV=yes
HOSTNAME_COMMAND=/usr/bin/hostname
EXIWHAT_EGREP_ARG='/exim( |$$)'
# End
Index: Makefile-OpenBSD
====================================================================
# $Cambridge: exim/exim-src/OS/Makefile-OpenBSD,v 1.1 2004/10/06 15:07:39 ph10 Exp $
# Exim: OS-specific make file for OpenBSD
CHOWN_COMMAND=/usr/sbin/chown
CHGRP_COMMAND=/usr/sbin/chgrp
CFLAGS=-O2 -Wall
HAVE_SA_LEN=YES
X11=/usr/X11R6
XINCLUDE=-I$(X11)/include
XLFLAGS=-L$(X11)/lib
EXIWHAT_MULTIKILL_CMD=pkill
EXIWHAT_MULTIKILL_ARG='exim( |$$|-)'
EXIWHAT_PS_ARG=-ax
EXIWHAT_EGREP_ARG='/exim( |$$)'
EXIWHAT_KILL_SIGNAL=-USR1
HAVE_IPV6=YES
# OpenBSD always ships with Berkeley DB
USE_DB=yes
# End
Index: Makefile-OpenUNIX
====================================================================
# $Cambridge: exim/exim-src/OS/Makefile-OpenUNIX,v 1.1 2004/10/06 15:07:39 ph10 Exp $
# Exim: OS-specific make file for OpenUNIX
CC=/usr/bin/cc
CFLAGS=-O -I/usr/local/include
LFLAGS=-L/usr/local/lib
LIBS=-lsocket -lnsl -lelf -lgen -lresolv
EXTRALIBS_EXIMON=-lICE -lSM
RANLIB=@true
ERRNO_QUOTA=0
X11=/usr/lib/X11
XINCLUDE=-I/usr/include/X11
XLFLAGS=-L/usr/lib -L$(X11)/lib
# End
Index: Makefile-QNX
====================================================================
# $Cambridge: exim/exim-src/OS/Makefile-QNX,v 1.1 2004/10/06 15:07:39 ph10 Exp $
# Exim: OS-specific makefile for QNX
BASENAME_COMMAND=/bin/basename
MAKE_SHELL=/usr/bin/bash
CHOWN_COMMAND=/bin/chown
CHGRP_COMMAND=/bin/chgrp
HOSTNAME_COMMAND=/bin/hostname
MV_COMMAND=/bin/mv
PERL_COMMAND=/usr/bin/perl
RM_COMMAND=/bin/rm
AR=ar -rc
CC=cc
CFLAGS=-Otax
LIBIDENTCFLAGS=
RANLIB=@true
DBMLIB=-ldb
USE_DB=yes
LIBS=-lsocket
X11=/usr/X11R6
XINCLUDE=-I$(X11)/include
XLFLAGS=-L$(X11)/lib
X11_LD_LIB=$(X11)/lib
# End
Index: Makefile-SCO
====================================================================
# $Cambridge: exim/exim-src/OS/Makefile-SCO,v 1.1 2004/10/06 15:07:39 ph10 Exp $
# Exim: OS-specific make file for SCO
# It was reported that some versions of gcc (e.g. 2.8.1) require this to be
# CFLAGS=-melf
CFLAGS=-b elf
RANLIB=@true
DBMLIB=-lndbm
ERRNO_QUOTA=0
LIBS=-lsocket
HAVE_ICONV=yes
X11=/usr/lib/X11
XINCLUDE=-I/usr/include/X11
XLFLAGS=-L/usr/lib -L$(X11)/lib
X11_LD_LIB=$(X11)/lib
# Changes from Frank Bernhardt (30/09/04)
BASENAME_COMMAND=/bin/basename
CHOWN_COMMAND=/bin/chown
CHGRP_COMMAND=/bin/chgrp
HOSTNAME_COMMAND=/usr/bin/hostname
# End
Index: Makefile-SCO_SV
====================================================================
# $Cambridge: exim/exim-src/OS/Makefile-SCO_SV,v 1.1 2004/10/06 15:07:39 ph10 Exp $
# Exim: OS-specific make file for SCO_SV release 5 (tested on 5.0.5 & 5.0.5)
# (see the UNIX_SV files for SCO 4.2)
# Supplied by: Tony Earnshaw <tonye@???>
# Note that 'gcc -melf -m486' applies to gcc 2.7.2 and higher;
# 2.7.1 and SCO's SDK need '-belf'.
# Removed -lwrap (PH 27/7/00) because not all systems have it
CFLAGS=-melf -O3 -m486
LFLAGS=-L/lib -L/usr/lib -L/usr/local/lib
LIBS=-ltinfo -lm -lsocket
HAVE_ICONV=yes
RANLIB=@true
DBMLIB=-lndbm
ERRNO_QUOTA=0
X11=/usr/lib/X11
XINCLUDE=-I/usr/include/X11
XLFLAGS=-L/usr/lib -L$(X11)/lib
X11_LD_LIB=$(X11)/lib
# Changes from Frank Bernhardt (30/9/04)
BASENAME_COMMAND=/bin/basename
CHOWN_COMMAND=/bin/chown
CHGRP_COMMAND=/bin/chgrp
HOSTNAME_COMMAND=/usr/bin/hostname
# End
Index: Makefile-SunOS4
====================================================================
# $Cambridge: exim/exim-src/OS/Makefile-SunOS4,v 1.1 2004/10/06 15:07:39 ph10 Exp $
# Exim: OS-specific make file for SunOS4
CFLAGS=-O
# Don't need -DSTRERROR_FROM_ERRLIST in PCRE_CFLAGS, because it is in os.h
# for SunOS4, which gets included for pcre.
PCRE_CFLAGS=-DUSE_BCOPY
CHOWN_COMMAND=/usr/etc/chown
HOSTNAME_COMMAND=/usr/bin/hostname
EXIT_FAILURE=1
EXIT_SUCCESS=0
LIBRESOLV=-lresolv
XINCLUDE=-I/usr/include/X11
EXIWHAT_PS_ARG=-ax
EXIWHAT_EGREP_ARG='/exim( |$$)'
EXIWHAT_KILL_SIGNAL=-30
# End
Index: Makefile-SunOS5
====================================================================
# $Cambridge: exim/exim-src/OS/Makefile-SunOS5,v 1.1 2004/10/06 15:07:39 ph10 Exp $
# Exim: OS-specific make file for SunOS5
CFLAGS=-O
HAVE_ICONV=yes
BASENAME_COMMAND=look_for_it
HOSTNAME_COMMAND=look_for_it
RANLIB=@true
LIBS=-lsocket -lnsl -lkstat
LIBRESOLV=-lresolv
EXIWHAT_MULTIKILL_CMD=pkill
EXIWHAT_MULTIKILL_ARG='exim( |$$|-)'
X11=/usr/openwin
XINCLUDE=-I$(X11)/include
XLFLAGS=-L$(X11)/lib -R$(X11)/lib
X11LIB=$(X11)/lib
# End
Index: Makefile-SunOS5-hal
====================================================================
# $Cambridge: exim/exim-src/OS/Makefile-SunOS5-hal,v 1.1 2004/10/06 15:07:39 ph10 Exp $
# Exim: OS-specific make file for SunOS5 on a HAL
# Note: The HAL runs a standard SunOS5 except that it has a 64 bit C
# compiler called hcc. To make things work pass the -KV7 flag to force
# 32bit compilation - this is necessary to interwork with some libraries.
CC=hcc
CFLAGS=-O -KV7
LIBIDENTCFLAGS="-KV7 -O -DHAVE_ANSIHEADERS"
LIBIDENTNAME=sunos5
RANLIB=@true
LIBS=-lsocket -lnsl -lkstat
LIBRESOLV=-lresolv
X11=/usr/X11R6
XINCLUDE=-I$(X11)/include
XLFLAGS=-L$(X11)/lib -R$(X11)/lib
# End
Index: Makefile-ULTRIX
====================================================================
# $Cambridge: exim/exim-src/OS/Makefile-ULTRIX,v 1.1 2004/10/06 15:07:39 ph10 Exp $
# Exim: OS-specific make file for Ultrix
MAKE_SHELL=/usr/bin/sh5
CFLAGS=-O
# This can either be /usr/include/X11 or /usr/include/mit depending on
# the particular version of ULTRIX.
XINCLUDE=-I/usr/include/X11 -I/usr/include/mit
DBMLIB=-lgdbm
EXIWHAT_PS_ARG=-ax
EXIWHAT_EGREP_ARG='/exim( |$$)'
EXIWHAT_KILL_SIGNAL=-USR1
# End
Index: Makefile-UNIX_SV
====================================================================
# $Cambridge: exim/exim-src/OS/Makefile-UNIX_SV,v 1.1 2004/10/06 15:07:39 ph10 Exp $
# Exim: OS-specific make file for SCO SVR4.2MP (and maybe Unixware)
#
# *** Note that for SCO 5 the configuration file is called SCO_SV,
# *** and that Unixware7 has its own configuration. This is an old
# *** file that is retained for compatibility.
#
# Note that SCO does not include dbm/ndbm with their standard compiler
# (it is available with /usr/ucb/cc, but that has bugs of its own). You
# should install gcc and gdbm, then execute 'make install-compat' in the
# gdbm source directory.
CC=gcc -I/usr/local/include
CFLAGS=-O
RANLIB=@true
DBMLIB=-lgdbm -L/usr/local/lib
ERRNO_QUOTA=0
LIBS=-lsocket -lelf -lgen -lnsl -lresolv
X11=/usr/lib/X11
XINCLUDE=-I/usr/include/X11
XLFLAGS=-L/usr/lib -L$(X11)/lib
# End
Index: Makefile-USG
====================================================================
# $Cambridge: exim/exim-src/OS/Makefile-USG,v 1.1 2004/10/06 15:07:39 ph10 Exp $
# Exim: OS-specific make file for Unixware 2.x
#
# Note that Unixware does not include db/dbm/ndbm with their standard compiler
# (it is available with /usr/ucb/cc, but that has bugs of its own). You
# should install gcc and Berkeley DB (or another dbm library if you really
# insist). If you use a different dbm library you will need to override
# DBMLIB below.
#
# DB 1.85 and 2.x can be found at
http://www.sleepycat.com/.
# They have different characteristics. See the discussion of dbm libraries
# in doc/dbm.discuss.txt in the Exim distribution.
#
# DB needs to be compiled with gcc and you need a 'cc' in your path
# before the Unixware CC to compile it.
#
# Don't bother even starting to install exim on Unixware unless
# you have installed gcc and use it for everything.
CC=gcc -I/usr/local/include
CFLAGS=-O
RANLIB=@true
DBMLIB=-ldb -L/usr/local/lib
USE_DB=YES
ERRNO_QUOTA=0
LIBS=-lsocket -lelf -lgen -lnsl -lresolv
X11=/usr/lib/X11
XINCLUDE=-I/usr/include/X11
XLFLAGS=-L/usr/lib -L$(X11)/lib
X11_LD_LIB=$(X11)/lib
# End
Index: Makefile-Unixware7
====================================================================
# $Cambridge: exim/exim-src/OS/Makefile-Unixware7,v 1.1 2004/10/06 15:07:39 ph10 Exp $
# Exim: OS-specific make file for Unixware7
# Based on information from James FitzGibbon <james@???>
# If you want to use libbind, you need to
# add -I/usr/local/bind/include to CFLAGS
# add -L/usr/local/bind/lib to LFLAGS
# remove -lresolv from LIBS
# add LOOKUP_LIBS=-lbind
# The new settings should go in your Local/Makefile rather than here; then
# they will be usable for subsequent Exim releases.
CC=/usr/bin/cc
CFLAGS=-O -I/usr/local/include
LFLAGS=-L/usr/local/lib
HAVE_ICONV=yes
LIBS=-lsocket -lnsl -lelf -lgen -lresolv
# Removed on the advice of Larry Rosenman
# EXTRALIBS=-lwrap
EXTRALIBS_EXIMON=-lICE -lSM
RANLIB=@true
ERRNO_QUOTA=0
X11=/usr/lib/X11
XINCLUDE=-I/usr/include/X11
XLFLAGS=-L/usr/lib -L$(X11)/lib
# End
Index: Makefile-mips
====================================================================
# $Cambridge: exim/exim-src/OS/Makefile-mips,v 1.1 2004/10/06 15:07:39 ph10 Exp $
# Exim: OS-specific make file for RiscOS4bsd
HOSTNAME_COMMAND=/usr/ucb/hostname
EXIT_FAILURE=1
EXIT_SUCCESS=0
LIBRESOLV=-lresolv
LIBS=-liberty
XINCLUDE=-I/usr/X11R6/include
CFLAGS=-O
PCRE_CFLAGS=-DUSE_BCOPY -DSTRERROR_FROM_ERRLIST
EXIWHAT_PS_ARG=-ax
EXIWHAT_EGREP_ARG='/exim( |$$)'
EXIWHAT_KILL_SIGNAL=-30
# End
Index: eximon.conf-Default
====================================================================
# $Cambridge: exim/exim-src/OS/eximon.conf-Default,v 1.1 2004/10/06 15:07:39 ph10 Exp $
# Exim: Default settings for the eximon script which fires up the Exim monitor.
# These can be overridden by OS-specific scripts and local installation
# scripts, and also at run time by shell variables.
# The name of the eximon binary, usually the same as the eximon script,
# with .bin stuck on the end.
EXIMON_BINARY=${EXIMON_BINARY-$0.bin}
# The remaining parameters are values likely to be changed to suit the
# user's taste. They are documented in the EDITME file.
WINDOW_TITLE=${EXIMON_WINDOW_TITLE-'"${hostname} eximon"'}
ACTION_OUTPUT=${EXIMON_ACTION_OUTPUT-no}
ACTION_QUEUE_UPDATE=${EXIMON_ACTION_QUEUE_UPDATE-yes}
BODY_MAX=${EXIMON_BODY_MAX-20000}
LOG_DEPTH=${EXIMON_LOG_DEPTH-300}
LOG_WIDTH=${EXIMON_LOG_WIDTH-${EXIMON_WIDTH-950}}
LOG_BUFFER=${EXIMON_LOG_BUFFER-20K}
LOG_FONT=${EXIMON_LOG_FONT--misc-fixed-medium-r-normal-*-14-140-*-*-*-*-iso8859-1}
LOG_STRIPCHARTS='/ <= /in/
/ => /out/
/ => .+ R=local/local/
/ => .+ T=[^ ]*smtp/smtp/'
MENU_EVENT=${EXIMON_MENU_EVENT-'Shift<Btn1Down>'}
MIN_HEIGHT=${EXIMON_MIN_HEIGHT-162}
MIN_WIDTH=${EXIMON_MIN_WIDTH-103}
QUEUE_DEPTH=${EXIMON_QUEUE_DEPTH-200}
QUEUE_WIDTH=${EXIMON_QUEUE_WIDTH-${EXIMON_WIDTH-950}}
QUEUE_FONT=${EXIMON_QUEUE_FONT-${LOG_FONT}}
QUEUE_MAX_ADDRESSES=${EXIMON_QUEUE_MAX_ADDRESSES-10}
QUEUE_INTERVAL=${EXIMON_QUEUE_INTERVAL-300}
QUEUE_STRIPCHART_NAME=${EXIMON_QUEUE_STRIPCHART_NAME-queue}
SIZE_STRIPCHART=${EXIMON_SIZE_STRIPCHART}
SIZE_STRIPCHART_NAME=${EXIMON_SIZE_STRIPCHART_NAME}
START_SMALL=${EXIMON_START_SMALL-no}
STRIPCHART_INTERVAL=${EXIMON_STRIPCHART_INTERVAL-60}
TEXT_DEPTH=${EXIMON_TEXT_DEPTH-200}
# End
Index: os.Configuring
====================================================================
$Cambridge: exim/exim-src/OS/os.Configuring,v 1.1 2004/10/06 15:07:39 ph10 Exp $
Configuring Exim for different Operating Systems
------------------------------------------------
These notes describe the way in which Exim is configured at the C program level
for different operating systems. The normal configuration options that apply
independently of the operating system are specified by creating files in the
Local directory, as described in chapter 4 of the manual.
These notes cover the os.* files in the OS directory, and contain information
for people who want to port the program to some new OS, or to modify the
configuration for an existing port. If you are just wanting to compile Exim on
a system that it already knows about, you do not need to read further unless
there are problems.
The os.c-<ostype> files
-----------------------
There may be an os.c-<ostype> file for each operating system, but for many of
them it is not necessary. No error occurs is there isn't one. There is a
generic file called os.c which contains code that is common to two or more OS
for setting a restarting or a non-restarting signal, for computing the load
average, and for finding all the network interface addresses. A few OS have
their own individual code for one or more of these. When they do, the code is
put into an os.c-<ostype> file, which also defines a macro such as
OS_RESTARTING_SIGNAL (for example) to cut out the common code in the generic
os.c.
The os.h-<ostype> files
-----------------------
For each OS that Exim knows about, there is an os.h-<ostype> file, where
<ostype> is the OS name. The relevant file is included as a C header file for
all Exim compilation by pointing a symbolic link called os.h at it from the
build directory. The settings are as follows:
The select() function
---------------------
There is a difference in the data type for the second argument to the select()
function in some OS. The macro SELECT_ARG2_TYPE can be used to define the type.
If it is not defined in os.h, then it is defaulted to fs_set in exim.h.
The dn_expand() function
------------------------
There is a difference in the data type for the fourth argument to the
dn_expand() function in some OS. The macro DN_EXPAND_ARG4_TYPE can be used to
define the type. If it is not defined in os.h, then it is defaulted to char *
in exim.h.
The h_errno variable
--------------------
If NEED_H_ERRNO is defined, then a definition of the form
extern int h_errno
is included in the compiled code of Exim.
The strerror() function
-----------------------
Most systems provide the ANSI standard strerror() function; older systems may
instead have an errlist[] variable in which to look up error texts. Defining
STRERROR_FROM_ERRLIST causes Exim to build its own strerror() function that
mimics the ANSI function by lookup up the error code in errlist.
Truncating files
----------------
The fcntl() option for truncating the length of a file is called F_FREESP in
most systems; in some, however, it is called O_TRUNC. Some os.h files define
F_FREESP to be O_TRUNC for this reason.
Finding local interfaces
------------------------
The SIOCGIFCONF ioctl for finding local interfaces behaves differently on BSD
systems. It returns a vector of ifreq blocks containing sockaddr structures
that can be longer than their sizeof definition, making the returned ifreq
blocks longer than their sizeof definitions. BSD sockaddrs structures contain
an sa_len field giving the actual size. To cope with difference, there is a
macro called HAVE_SA_LEN. If it is defined, code that works on BSD systems is
used. Otherwise, the objects returned by SIOCGIFCONF are assumed to be of
length sizeof(struct ifreq).
On some operating systems, the SIOCGIFCONF ioctl returns the IP addresses
with the list of interfaces, and there is no need to call SIOCGIFADDR for each
individual address. Mostly, making the second call does no harm, but on Linux
when there are IP aliases, it causes things to go wrong. This also happens on
BSDI. Therefore, there is now a macro to cut it out, called
SIOCGIFCONF_GIVES_ADDR.
Note that, if IPv6 support is configured, Exim cannot find the IPv6 addresses
on local interfaces by itself. You need to set the local_interfaces option in
this situation.
Computing load averages
-----------------------
There are several different ways that load averages are computed. One-off code
is put in the os.c-<ostype>, but several OS use similar methods, and these
are coded in the generic os.c, using a number of parameters to make variations
between OS.
Sometimes the load average is not available to unprivileged callers. If
LOAD_AVG_NEEDS_ROOT is set, Exim ensures that it is root before trying to
obtain a load average value.
(1) If HAVE_BSD_GETLOADAVG is defined, Exim uses a simple call to the
getloadavg() function.
(2) If HAVE_KSTAT is defined, Exim uses the kstat package as found in Solaris 2
(but nowhere else as yet). It uses some supplementary definitions:
LOAD_AVG_KSTAT the kstat to use
LOAD_AVG_KSTAT_MODULE the module to access
LOAD_AVG_KSTAT_SYMBOL the symbol containing the value we want
LOAD_AVG_KSTAT_FIELD the field identity
(3) If HAVE_DEV_KMEM is defined, Exim reads load average values from the
/dev/kmem device. It uses some supplementary definitions:
LOAD_AVG_TYPE the data type
LOAD_AVG_SYMBOL the symbol to look up
KERNEL_PATH the name of the kernel
FSCALE a scaling factor
Sometimes FSCALE is defined in system headers so need not be defined in the
os.h-<ostype> file.
Glibc systems and IP options
----------------------------
The code for inspecting IP options is the same in all OS except for systems
using glibc (e.g. Linux), which uses a different structure to return data from
getsockopt(). To handle this, there is a macro called
GLIBC_IP_OPTIONS
which should be set for Linux (in os.h-Linux) and any other operating system
that uses glibc.
Options for statvfs()
---------------------
The following settings apply to the compilation of the Exim monitor as well as
to the main Exim binary.
#undefine HAVE_STATFS
Exim has options for checking the amount of space in the spool partition
before accepting a message, and the monitor has the ability to display a
stripchart of the percentage fullness of a particular disc partition, usually
/var/spool/mail. The standard way of finding out the data is to call the
statvfs() function, but some operating systems use statfs() and some may not
have the ability at all. The Exim code uses STATVFS() for this function and
this gets defined appropriately. HAVE_STATFS is defined before including the
os.h file; undefining it suppresses the code for checking a partition in the
main binary, and for monitoring disc partition in the monitor.
When HAVE_STATFS is defined, the distinction between statvfs() and statfs() is
made by checking HAVE_SYS_STATVFS_H. If it is defined, then sys/statvfs.h is
included. Otherwise, STATVFS() is defined as a macro for statfs(), and some
further includes are done, according to the following definitions:
#define HAVE_SYS_MOUNT_H
#define HAVE_VFS_H
Each of those definitions causes the inclusion of the corresponding system
header file in the Exim monitor compilation. For example, the first one causes
#include <sys/mount.h>
to be obeyed. Different systems may require different combinations of these
headers.
The sys/resource.h header
-------------------------
One OS does not have the sys/resource.h header. If NO_SYS_RESOURCE_H is defined
in an os.h-<ostype> file, then the #include for this header is skipped in
exim.h.
The crypt_h header
------------------
Some OS require crypt.h to be included to get a prototype for the crypt()
function. This is needed only when compiling with AUTH support. If CRYPT_H is
defined, then this header is included.
mmap() support
--------------
The CDB support includes the option of handling file operations by using
mmap()/munmap(). This gives a reasonable performance increase which will
probably scale over multiple processes (since the files are mapped read-only
shared). The vast majority of modern operating systems will support mmap
(certainly in the simplified way that it is being used here). For example any
BSD 4.x derived or POSIX compliant system will support it, as will pretty much
any system using dynamically shared link libraries.
If the OS is believed to support mmap() then the symbol HAVE_MMAP is defined.
Not all systems that support mmap will have had their config files updated to
reflect this. Currently Linux, Sun, BSD and SGI/mips systems have been updated.
*** End ***
Index: os.c-GNU
====================================================================
/* $Cambridge: exim/exim-src/OS/os.c-GNU,v 1.1 2004/10/06 15:07:39 ph10 Exp $ */
/*************************************************
* Exim - an Internet mail transport agent *
*************************************************/
/* See the file NOTICE for conditions of use and distribution. */
/* GNU-specific code. This is concatenated onto the generic src/os.c file.
GNU/Hurd has approximately the same way to determine the load average as NeXT,
so a variant of this could also be in the generic os.c file. See the GNU EMacs
getloadavg.c file, from which this snippet was derived. getloadavg.c from Emacs
is copyrighted by the FSF under the terms of the GPLv2 or any later version.
Changes are hereby placed under the same license, as requested by the GPL. */
#ifndef OS_LOAD_AVERAGE
#define OS_LOAD_AVERAGE
#include <mach.h>
static processor_set_t default_set;
static int getloadavg_initialized;
int
os_getloadavg (void)
{
host_t host;
struct processor_set_basic_info info;
unsigned info_count;
if (!getloadavg_initialized)
{
if (processor_set_default (mach_host_self(), &default_set) == KERN_SUCCESS)
getloadavg_initialized = 1;
}
if (getloadavg_initialized)
{
info_count = PROCESSOR_SET_BASIC_INFO_COUNT;
if (processor_set_info(default_set, PROCESSOR_SET_BASIC_INFO, &host,
(processor_set_info_t)&info, &info_count) != KERN_SUCCESS)
getloadavg_initialized = 0;
else
{
#if LOAD_SCALE == 1000
return info.load_average;
#else
return (int) (((double) info.load_average * 1000) / LOAD_SCALE));
#endif
}
}
return -1;
}
#endif /* OS_LOAD_AVERAGE */
/* End of os.c-GNU */
Index: os.c-HI-OSF
====================================================================
/* $Cambridge: exim/exim-src/OS/os.c-HI-OSF,v 1.1 2004/10/06 15:07:39 ph10 Exp $ */
/*************************************************
* Exim - an Internet mail transport agent *
*************************************************/
/* Copyright (c) University of Cambridge 2001 */
/* See the file NOTICE for conditions of use and distribution. */
/* HI-OSF-specific code. This is concatenated onto the generic
src/os.c file. OSF has an apparently unique way of getting the
load average, so we provide a unique function here, and define
OS_LOAD_AVERAGE to stop src/os.c trying to provide the function. */
#ifndef OS_LOAD_AVERAGE
#define OS_LOAD_AVERAGE
#include <sys/table.h>
int
os_getloadavg(void)
{
double avg;
struct tbl_loadavg load_avg;
table (TBL_LOADAVG, 0, &load_avg, 1, sizeof (load_avg));
avg = (load_avg.tl_lscale == 0)?
load_avg.tl_avenrun.d[0] :
(load_avg.tl_avenrun.l[0] / (double)load_avg.tl_lscale);
return (int)(avg * 1000.0);
}
#endif /* OS_LOAD_AVERAGE */
/* End of os.c-HI-OSF */
Index: os.c-IRIX
====================================================================
/* $Cambridge: exim/exim-src/OS/os.c-IRIX,v 1.1 2004/10/06 15:07:39 ph10 Exp $ */
/*************************************************
* Exim - an Internet mail transport agent *
*************************************************/
/* Copyright (c) University of Cambridge 2001 */
/* See the file NOTICE for conditions of use and distribution. */
/* Irix-specific code. This is concatenated onto the generic src/os.c file.
Irix has a unique way of finding all the network interfaces, so we provide a
unique function here, and define FIND_RUNNING_INTERFACES to stop src/os.c
trying to provide the function. The macro may be set initially anyway, when
compiling os. for utilities that don't want this function. */
#ifndef FIND_RUNNING_INTERFACES
#define FIND_RUNNING_INTERFACES
/* This is the special form of the function using sysctl() which is the only
form that returns all the aliases on IRIX systems. This code has its origins
in a sample program that came from within SGI. */
#include <sys/sysctl.h>
#include <net/if_dl.h>
#include <net/if_types.h>
#include <net/soioctl.h>
#include <net/route.h>
#define ROUNDUP(a) ((a) > 0 ? (1 + (((a) - 1) | (sizeof(__uint64_t) -1))) \
: sizeof(__uint64_t))
#ifdef _HAVE_SA_LEN
#define ADVANCE(x, n) (x += ROUNDUP((n)->sa_len))
#else
#define ADVANCE(x, n) (x += ROUNDUP(_FAKE_SA_LEN_DST(n)))
#endif
ip_address_item *
os_find_running_interfaces(void)
{
ip_address_item *yield = NULL;
ip_address_item *last = NULL;
ip_address_item *next;
size_t needed;
int mib[6];
char *buf, *nextaddr, *lim;
register struct if_msghdr *ifm;
mib[0] = CTL_NET;
mib[1] = PF_ROUTE;
mib[2] = 0;
mib[3] = 0;
mib[4] = NET_RT_IFLIST;
mib[5] = 0;
/* Get an estimate of the amount of store needed, then get the store and
get the data into it. Any error causes a panic death. */
if (sysctl(mib, 6, NULL, &needed, NULL, 0) < 0)
log_write(0, LOG_PANIC_DIE, "iflist-sysctl-estimate failed: %s",
strerror(errno));
buf = store_get(needed);
if (sysctl(mib, 6, buf, &needed, NULL, 0) < 0)
log_write(0, LOG_PANIC_DIE, "sysctl of ifnet list failed: %s",
strerror(errno));
/* Now fish out the data for each interface */
lim = buf + needed;
for (nextaddr = buf; nextaddr < lim; nextaddr += ifm->ifm_msglen)
{
ifm = (struct if_msghdr *)nextaddr;
if (ifm->ifm_type != RTM_IFINFO)
{
struct ifa_msghdr *ifam = (struct ifa_msghdr *)ifm;
struct sockaddr_in *mask = NULL, *addr = NULL;
if ((ifam->ifam_addrs & RTA_NETMASK) != 0)
mask = (struct sockaddr_in *)(ifam + 1);
if ((ifam->ifam_addrs & RTA_IFA) != 0)
{
char *cp = (char *)mask;
struct sockaddr *sa = (struct sockaddr *)mask;
ADVANCE(cp, sa);
addr = (struct sockaddr_in *)cp;
}
/* Create a data block for the address, fill in the data, and put it on
the chain. This data has to survive for ever, so use malloc. */
if (addr != NULL)
{
next = store_malloc(sizeof(ip_address_item));
next->next = NULL;
next->port = 0;
(void)host_ntoa(-1, addr, next->address, NULL);
if (yield == NULL) yield = last = next; else
{
last->next = next;
last = next;
}
DEBUG(D_interface) debug_printf("Actual local interface address is %s\n",
last->address);
}
}
}
return yield;
}
#endif /* FIND_RUNNING_INTERFACES */
/* End of os.c-IRIX */
Index: os.c-IRIX6
====================================================================
/* $Cambridge: exim/exim-src/OS/os.c-IRIX6,v 1.1 2004/10/06 15:07:39 ph10 Exp $ */
/*************************************************
* Exim - an Internet mail transport agent *
*************************************************/
/* Copyright (c) University of Cambridge 2001 */
/* See the file NOTICE for conditions of use and distribution. */
/* Irix-specific code. This is concatenated onto the generic src/os.c file.
Irix has a unique way of finding all the network interfaces, so we provide a
unique function here, and define FIND_RUNNING_INTERFACES to stop src/os.c
trying to provide the function. The macro may be set initially anyway, when
compiling os. for utilities that don't want this function. */
#ifndef FIND_RUNNING_INTERFACES
#define FIND_RUNNING_INTERFACES
/* This is the special form of the function using sysctl() which is the only
form that returns all the aliases on IRIX systems. This code has its origins
in a sample program that came from within SGI. */
#include <sys/sysctl.h>
#include <net/if_dl.h>
#include <net/if_types.h>
#include <net/soioctl.h>
#include <net/route.h>
#define ROUNDUP(a) ((a) > 0 ? (1 + (((a) - 1) | (sizeof(__uint64_t) -1))) \
: sizeof(__uint64_t))
#ifdef _HAVE_SA_LEN
#define ADVANCE(x, n) (x += ROUNDUP((n)->sa_len))
#else
#define ADVANCE(x, n) (x += ROUNDUP(_FAKE_SA_LEN_DST(n)))
#endif
ip_address_item *
os_find_running_interfaces(void)
{
ip_address_item *yield = NULL;
ip_address_item *last = NULL;
ip_address_item *next;
size_t needed;
int mib[6];
char *buf, *nextaddr, *lim;
register struct if_msghdr *ifm;
mib[0] = CTL_NET;
mib[1] = PF_ROUTE;
mib[2] = 0;
mib[3] = 0;
mib[4] = NET_RT_IFLIST;
mib[5] = 0;
/* Get an estimate of the amount of store needed, then get the store and
get the data into it. Any error causes a panic death. */
if (sysctl(mib, 6, NULL, &needed, NULL, 0) < 0)
log_write(0, LOG_PANIC_DIE, "iflist-sysctl-estimate failed: %s",
strerror(errno));
buf = store_get(needed);
if (sysctl(mib, 6, buf, &needed, NULL, 0) < 0)
log_write(0, LOG_PANIC_DIE, "sysctl of ifnet list failed: %s",
strerror(errno));
/* Now fish out the data for each interface */
lim = buf + needed;
for (nextaddr = buf; nextaddr < lim; nextaddr += ifm->ifm_msglen)
{
ifm = (struct if_msghdr *)nextaddr;
if (ifm->ifm_type != RTM_IFINFO)
{
struct ifa_msghdr *ifam = (struct ifa_msghdr *)ifm;
struct sockaddr_in *mask = NULL, *addr = NULL;
if ((ifam->ifam_addrs & RTA_NETMASK) != 0)
mask = (struct sockaddr_in *)(ifam + 1);
if ((ifam->ifam_addrs & RTA_IFA) != 0)
{
char *cp = (char *)mask;
struct sockaddr *sa = (struct sockaddr *)mask;
ADVANCE(cp, sa);
addr = (struct sockaddr_in *)cp;
}
/* Create a data block for the address, fill in the data, and put it on
the chain. This data has to survive for ever, so use malloc. */
if (addr != NULL)
{
next = store_malloc(sizeof(ip_address_item));
next->next = NULL;
next->port = 0;
(void)host_ntoa(-1, addr, next->address, NULL);
if (yield == NULL) yield = last = next; else
{
last->next = next;
last = next;
}
DEBUG(D_interface) debug_printf("Actual local interface address is %s\n",
last->address);
}
}
}
return yield;
}
#endif /* FIND_RUNNING_INTERFACES */
/* End of os.c-IRIX */
Index: os.c-IRIX632
====================================================================
/* $Cambridge: exim/exim-src/OS/os.c-IRIX632,v 1.1 2004/10/06 15:07:39 ph10 Exp $ */
/*************************************************
* Exim - an Internet mail transport agent *
*************************************************/
/* Copyright (c) University of Cambridge 2001 */
/* See the file NOTICE for conditions of use and distribution. */
/* Irix-specific code. This is concatenated onto the generic src/os.c file.
Irix has a unique way of finding all the network interfaces, so we provide a
unique function here, and define FIND_RUNNING_INTERFACES to stop src/os.c
trying to provide the function. The macro may be set initially anyway, when
compiling os. for utilities that don't want this function. */
#ifndef FIND_RUNNING_INTERFACES
#define FIND_RUNNING_INTERFACES
/* This is the special form of the function using sysctl() which is the only
form that returns all the aliases on IRIX systems. This code has its origins
in a sample program that came from within SGI. */
#include <sys/sysctl.h>
#include <net/if_dl.h>
#include <net/if_types.h>
#include <net/soioctl.h>
#include <net/route.h>
#define ROUNDUP(a) ((a) > 0 ? (1 + (((a) - 1) | (sizeof(__uint64_t) -1))) \
: sizeof(__uint64_t))
#ifdef _HAVE_SA_LEN
#define ADVANCE(x, n) (x += ROUNDUP((n)->sa_len))
#else
#define ADVANCE(x, n) (x += ROUNDUP(_FAKE_SA_LEN_DST(n)))
#endif
ip_address_item *
os_find_running_interfaces(void)
{
ip_address_item *yield = NULL;
ip_address_item *last = NULL;
ip_address_item *next;
size_t needed;
int mib[6];
char *buf, *nextaddr, *lim;
register struct if_msghdr *ifm;
mib[0] = CTL_NET;
mib[1] = PF_ROUTE;
mib[2] = 0;
mib[3] = 0;
mib[4] = NET_RT_IFLIST;
mib[5] = 0;
/* Get an estimate of the amount of store needed, then get the store and
get the data into it. Any error causes a panic death. */
if (sysctl(mib, 6, NULL, &needed, NULL, 0) < 0)
log_write(0, LOG_PANIC_DIE, "iflist-sysctl-estimate failed: %s",
strerror(errno));
buf = store_get(needed);
if (sysctl(mib, 6, buf, &needed, NULL, 0) < 0)
log_write(0, LOG_PANIC_DIE, "sysctl of ifnet list failed: %s",
strerror(errno));
/* Now fish out the data for each interface */
lim = buf + needed;
for (nextaddr = buf; nextaddr < lim; nextaddr += ifm->ifm_msglen)
{
ifm = (struct if_msghdr *)nextaddr;
if (ifm->ifm_type != RTM_IFINFO)
{
struct ifa_msghdr *ifam = (struct ifa_msghdr *)ifm;
struct sockaddr_in *mask = NULL, *addr = NULL;
if ((ifam->ifam_addrs & RTA_NETMASK) != 0)
mask = (struct sockaddr_in *)(ifam + 1);
if ((ifam->ifam_addrs & RTA_IFA) != 0)
{
char *cp = (char *)mask;
struct sockaddr *sa = (struct sockaddr *)mask;
ADVANCE(cp, sa);
addr = (struct sockaddr_in *)cp;
}
/* Create a data block for the address, fill in the data, and put it on
the chain. This data has to survive for ever, so use malloc. */
if (addr != NULL)
{
next = store_malloc(sizeof(ip_address_item));
next->next = NULL;
next->port = 0;
(void)host_ntoa(-1, addr, next->address, NULL);
if (yield == NULL) yield = last = next; else
{
last->next = next;
last = next;
}
DEBUG(D_interface) debug_printf("Actual local interface address is %s\n",
last->address);
}
}
}
return yield;
}
#endif /* FIND_RUNNING_INTERFACES */
/* End of os.c-IRIX */
Index: os.c-IRIX65
====================================================================
/* $Cambridge: exim/exim-src/OS/os.c-IRIX65,v 1.1 2004/10/06 15:07:39 ph10 Exp $ */
/*************************************************
* Exim - an Internet mail transport agent *
*************************************************/
/* Copyright (c) University of Cambridge 2001 */
/* See the file NOTICE for conditions of use and distribution. */
/* Irix-specific code. This is concatenated onto the generic src/os.c file.
Irix has a unique way of finding all the network interfaces, so we provide a
unique function here, and define FIND_RUNNING_INTERFACES to stop src/os.c
trying to provide the function. The macro may be set initially anyway, when
compiling os. for utilities that don't want this function. */
#ifndef FIND_RUNNING_INTERFACES
#define FIND_RUNNING_INTERFACES
/* This is the special form of the function using sysctl() which is the only
form that returns all the aliases on IRIX systems. This code has its origins
in a sample program that came from within SGI. */
#include <sys/sysctl.h>
#include <net/if_dl.h>
#include <net/if_types.h>
#include <net/soioctl.h>
#include <net/route.h>
#define ROUNDUP(a) ((a) > 0 ? (1 + (((a) - 1) | (sizeof(__uint64_t) -1))) \
: sizeof(__uint64_t))
#ifdef _HAVE_SA_LEN
#define ADVANCE(x, n) (x += ROUNDUP((n)->sa_len))
#else
#define ADVANCE(x, n) (x += ROUNDUP(_FAKE_SA_LEN_DST(n)))
#endif
ip_address_item *
os_find_running_interfaces(void)
{
ip_address_item *yield = NULL;
ip_address_item *last = NULL;
ip_address_item *next;
size_t needed;
int mib[6];
char *buf, *nextaddr, *lim;
register struct if_msghdr *ifm;
mib[0] = CTL_NET;
mib[1] = PF_ROUTE;
mib[2] = 0;
mib[3] = 0;
mib[4] = NET_RT_IFLIST;
mib[5] = 0;
/* Get an estimate of the amount of store needed, then get the store and
get the data into it. Any error causes a panic death. */
if (sysctl(mib, 6, NULL, &needed, NULL, 0) < 0)
log_write(0, LOG_PANIC_DIE, "iflist-sysctl-estimate failed: %s",
strerror(errno));
buf = store_get(needed);
if (sysctl(mib, 6, buf, &needed, NULL, 0) < 0)
log_write(0, LOG_PANIC_DIE, "sysctl of ifnet list failed: %s",
strerror(errno));
/* Now fish out the data for each interface */
lim = buf + needed;
for (nextaddr = buf; nextaddr < lim; nextaddr += ifm->ifm_msglen)
{
ifm = (struct if_msghdr *)nextaddr;
if (ifm->ifm_type != RTM_IFINFO)
{
struct ifa_msghdr *ifam = (struct ifa_msghdr *)ifm;
struct sockaddr_in *mask = NULL, *addr = NULL;
if ((ifam->ifam_addrs & RTA_NETMASK) != 0)
mask = (struct sockaddr_in *)(ifam + 1);
if ((ifam->ifam_addrs & RTA_IFA) != 0)
{
char *cp = (char *)mask;
struct sockaddr *sa = (struct sockaddr *)mask;
ADVANCE(cp, sa);
addr = (struct sockaddr_in *)cp;
}
/* Create a data block for the address, fill in the data, and put it on
the chain. This data has to survive for ever, so use malloc. */
if (addr != NULL)
{
next = store_malloc(sizeof(ip_address_item));
next->next = NULL;
next->port = 0;
(void)host_ntoa(-1, addr, next->address, NULL);
if (yield == NULL) yield = last = next; else
{
last->next = next;
last = next;
}
DEBUG(D_interface) debug_printf("Actual local interface address is %s\n",
last->address);
}
}
}
return yield;
}
#endif /* FIND_RUNNING_INTERFACES */
/* End of os.c-IRIX */
Index: os.c-Linux
====================================================================
/* $Cambridge: exim/exim-src/OS/os.c-Linux,v 1.1 2004/10/06 15:07:39 ph10 Exp $ */
/*************************************************
* Exim - an Internet mail transport agent *
*************************************************/
/* Copyright (c) University of Cambridge 1997 - 2001 */
/* See the file NOTICE for conditions of use and distribution. */
/* Linux-specific code. This is concatenated onto the generic
src/os.c file. */
/*************************************************
* Load average computation *
*************************************************/
/*Linux has an apparently unique way of getting the load average, so we provide
a unique function here, and define OS_LOAD_AVERAGE to stop src/os.c trying to
provide the function. However, when compiling os.c for utilities, we may not
want this at all, so check that it isn't set first. */
#ifndef OS_LOAD_AVERAGE
#define OS_LOAD_AVERAGE
/* Linux has 2 ways of returning load average:
(1) Do a read on /proc/loadavg
(2) Use the sysinfo library function and syscall
The latter is simpler but in Linux 2.0 - 2.2 (and probably later releases) is
exceptionally slow - 10-50ms per call is not unusual and about 100x slow the
first method. This cripples high performance mail servers by increasing CPU
utilisation by 3-5x.
In Exim's very early days, it used the 1st method. Later, it switched to the
2nd method. Now it tries the 1st method and falls back to the 2nd if /proc is
unavailable. */
#include <sys/sysinfo.h>
static int
linux_slow_getloadavg(void)
{
struct sysinfo s;
double avg;
if (sysinfo(&s) < 0) return -1;
avg = (double) (s.loads[0]) / (1<<SI_LOAD_SHIFT);
return (int)(avg * 1000.0);
}
int
os_getloadavg(void)
{
char buffer[40];
double avg;
int count;
int fd = open ("/proc/loadavg", O_RDONLY);
if (fd == -1) return linux_slow_getloadavg();
count = read (fd, buffer, sizeof(buffer));
(void)close (fd);
if (count <= 0) return linux_slow_getloadavg();
count = sscanf (buffer, "%lf", &avg);
if (count < 1) return linux_slow_getloadavg();
return (int)(avg * 1000.0);
}
#endif /* OS_LOAD_AVERAGE */
/*************************************************
* Finding interface addresses *
*************************************************/
/* This function is not required for utilities; we cut it out if
FIND_RUNNING_INTERFACES is already defined. */
#ifndef FIND_RUNNING_INTERFACES
/* This code, contributed by Jason Gunthorpe, appears to be the current
way of finding IPv6 interfaces in Linux. It first calls the common function in
order to find IPv4 interfaces, then grobbles around to find the others. Jason
said, "This is so horrible, don't look. Slightly ripped from net-tools
ifconfig." It gets called by virtue of os_find_running_interfaces being defined
as a macro for os_find_running_interfaces_linux in the os.h-Linux file. */
ip_address_item *
os_find_running_interfaces_linux(void)
{
ip_address_item *yield = NULL;
#if HAVE_IPV6
ip_address_item *last = NULL;
ip_address_item *next;
char addr6p[8][5];
unsigned int plen, scope, dad_status, if_idx;
char devname[20];
FILE *f;
#endif
yield = os_common_find_running_interfaces();
#if HAVE_IPV6
/* Open the /proc file; give up if we can't. */
if ((f = fopen("/proc/net/if_inet6", "r")) == NULL) return yield;
/* Pick out the data from within the file, and add it on to the chain */
last = yield;
if (last != NULL) while (last->next != NULL) last = last->next;
while (fscanf(f, "%4s%4s%4s%4s%4s%4s%4s%4s %02x %02x %02x %02x %20s\n",
addr6p[0], addr6p[1], addr6p[2], addr6p[3],
addr6p[4], addr6p[5], addr6p[6], addr6p[7],
&if_idx, &plen, &scope, &dad_status, devname) != EOF)
{
struct sockaddr_in6 addr;
/* This data has to survive for ever, so use malloc. */
next = store_malloc(sizeof(ip_address_item));
next->next = NULL;
next->port = 0;
sprintf(CS next->address, "%s:%s:%s:%s:%s:%s:%s:%s",
addr6p[0], addr6p[1], addr6p[2], addr6p[3],
addr6p[4], addr6p[5], addr6p[6], addr6p[7]);
/* Normalize the representation */
inet_pton(AF_INET6, CS next->address, &addr.sin6_addr);
inet_ntop(AF_INET6, &addr.sin6_addr, CS next->address, sizeof(next->address));
if (yield == NULL) yield = last = next; else
{
last->next = next;
last = next;
}
DEBUG(D_interface)
debug_printf("Actual local interface address is %s (%s)\n", last->address,
devname);
}
fclose(f);
#endif /* HAVE_IPV6 */
return yield;
}
#endif /* FIND_RUNNING_INTERFACES */
/* End of os.c-Linux */
Index: os.c-Linux-libc5
====================================================================
/* $Cambridge: exim/exim-src/OS/os.c-Linux-libc5,v 1.1 2004/10/06 15:07:39 ph10 Exp $ */
/*************************************************
* Exim - an Internet mail transport agent *
*************************************************/
/* Copyright (c) University of Cambridge 2001 */
/* See the file NOTICE for conditions of use and distribution. */
/* Linux-specific code. This is concatenated onto the generic src/os.c file.
Linux has an apparently unique way of getting the load average, so we provide a
unique function here, and define OS_LOAD_AVERAGE to stop src/os.c trying to
provide the function. The macro may be set initially anyway, when compiling os.
for utilities that don't want this function. */
#ifndef OS_LOAD_AVERAGE
#define OS_LOAD_AVERAGE
int
os_getloadavg(void)
{
char buffer[40];
double avg;
int count;
int fd = open ("/proc/loadavg", O_RDONLY);
if (fd == -1) return -1;
count = read (fd, buffer, sizeof(buffer));
(void)close (fd);
if (count <= 0) return -1;
count = sscanf (buffer, "%lf", &avg);
if (count < 1) return -1;
return (int)(avg * 1000.0);
}
#endif /* OS_LOAD_AVERAGE */
/* End of os.c-Linux */
Index: os.c-OSF1
====================================================================
/* $Cambridge: exim/exim-src/OS/os.c-OSF1,v 1.1 2004/10/06 15:07:39 ph10 Exp $ */
/*************************************************
* Exim - an Internet mail transport agent *
*************************************************/
/* Copyright (c) University of Cambridge 2001 */
/* See the file NOTICE for conditions of use and distribution. */
/* OSF1-specific code. This is concatenated onto the generic src/os.c file.
OSF1 has an apparently unique way of getting the load average, so we provide a
unique function here, and define OS_LOAD_AVERAGE to stop src/os.c trying to
provide the function. The macro may be set initially anyway, when compiling os.
for utilities that don't want this function. */
#ifndef OS_LOAD_AVERAGE
#define OS_LOAD_AVERAGE
#include <sys/table.h>
int
os_getloadavg(void)
{
double avg;
struct tbl_loadavg load_avg;
table (TBL_LOADAVG, 0, &load_avg, 1, sizeof (load_avg));
avg = (load_avg.tl_lscale == 0)?
load_avg.tl_avenrun.d[0] :
(load_avg.tl_avenrun.l[0] / (double)load_avg.tl_lscale);
return (int)(avg * 1000.0);
}
#endif /* OS_LOAD_AVERAGE */
/* End of os.c-OSF1 */
Index: os.c-cygwin
====================================================================
/* $Cambridge: exim/exim-src/OS/os.c-cygwin,v 1.1 2004/10/06 15:07:39 ph10 Exp $ */
/*************************************************
* Exim - an Internet mail transport agent *
*************************************************/
/* Cygwin-specific code. December 2002
This is concatenated onto the generic src/os.c file.
This code was supplied by Pierre A. Humblet <Pierre.Humblet@???>
*/
/* We need a special mkdir that
allows names starting with // */
#undef mkdir
int cygwin_mkdir( const char *path, mode_t mode )
{
const char * p = path;
if (*p == '/') while(*(p+1) == '/') p++;
return mkdir(p, mode);
}
/* We have strsignal but cannot use #define
because types don't match */
#define OS_STRSIGNAL /* src/os.c need not provide it */
char * os_strsignal(int sig)
{
return (char *) strsignal(sig);
}
#ifndef COMPILE_UTILITY /* Utilities don't need special code */
#ifdef INCLUDE_MINIRES
#include "../minires/minires.c"
#include "../minires/os-interface.c"
#endif
#ifdef INCLUDE_PAM
#include "../pam/pam.c"
#endif
unsigned int cygwin_WinVersion;
/* Conflict between Windows definitions and others */
#ifdef NOERROR
#undef NOERROR
#endif
#ifdef DELETE
#undef DELETE
#endif
#include <windows.h>
#include <sys/cygwin.h>
/* Special static variables */
static BOOL cygwin_debug = FALSE;
static int privileged = 1; /* when not privileged, setuid = noop */
#undef setuid
int cygwin_setuid(uid_t uid )
{
int res;
if (privileged <= 0) return 0;
else {
res = setuid(uid);
if (cygwin_debug)
fprintf(stderr, "setuid %lu %lu %d pid: %d\n",
uid, getuid(),res, getpid());
}
return res;
}
#undef setgid
int cygwin_setgid(gid_t gid )
{
int res;
if (privileged <= 0) return 0;
else {
res = setgid(gid);
if (cygwin_debug)
fprintf(stderr, "setgid %lu %lu %d pid: %d\n",
gid, getgid(), res, getpid());
}
return res;
}
/* Background processes run at lower priority */
static void setpriority()
{
if (!SetPriorityClass(GetCurrentProcess(), BELOW_NORMAL_PRIORITY_CLASS))
SetPriorityClass(GetCurrentProcess(), IDLE_PRIORITY_CLASS);
return;
}
/* GetVersion()
MSB: 1 for 95/98/ME; Next 7: build number, except for 95/98/ME
Next byte: 0
Next byte: minor version of OS
Low byte: major version of OS (3 or 4 for for NT, 5 for 2000 and XP) */
#define VERSION_IS_58M(x) (x & 0x80000000) /* 95, 98, Me */
#define VERSION_IS_NT(x) ((x & 0XFF) < 5) /* NT 4 or 3.51 */
/*
Routine to find if process or thread is privileged
*/
enum {
CREATE_BIT = 1,
RESTORE_BIT = 2
};
static DWORD get_privileges ()
{
char buffer[1024];
DWORD i, length;
HANDLE hToken = NULL;
PTOKEN_PRIVILEGES privs;
LUID cluid, rluid;
DWORD ret = 0;
privs = (PTOKEN_PRIVILEGES) buffer;
if (OpenProcessToken (GetCurrentProcess(), TOKEN_QUERY, &hToken)
&& LookupPrivilegeValue (NULL, SE_CREATE_TOKEN_NAME, &cluid)
&& LookupPrivilegeValue(NULL, SE_RESTORE_NAME, &rluid)
&& (GetTokenInformation( hToken, TokenPrivileges,
privs, sizeof (buffer), &length)
|| (GetLastError () == ERROR_INSUFFICIENT_BUFFER
&& (privs = (PTOKEN_PRIVILEGES) alloca (length))
&& GetTokenInformation(hToken, TokenPrivileges,
privs, length, &length)))) {
for (i = 0; i < privs->PrivilegeCount; i++) {
if (privs->Privileges[i].Luid.QuadPart == cluid.QuadPart)
ret |= CREATE_BIT;
else if (privs->Privileges[i].Luid.QuadPart == rluid.QuadPart)
ret |= RESTORE_BIT;
else continue;
if (ret == (CREATE_BIT | RESTORE_BIT))
break;
}
}
else
fprintf(stderr, "has_create_token_privilege %ld\n", GetLastError());
if (hToken)
CloseHandle(hToken);
return ret;
}
/* We use a special routine to initialize
cygwin_init is called from the OS_INIT macro in main(). */
void cygwin_init(int argc, char ** argv, void * rup,
void * eup, void * egp, void * cup)
{
int i;
uid_t myuid, systemuid;
gid_t mygid, adminsgid;
struct passwd * pwp;
char *cygenv, win32_path[MAX_PATH];
SID(1, SystemSid, SECURITY_LOCAL_SYSTEM_RID);
SID(2, AdminsSid, SECURITY_BUILTIN_DOMAIN_RID, DOMAIN_ALIAS_RID_ADMINS);
DWORD priv_flags;
myuid = getuid();
mygid = getgid();
cygwin_WinVersion = GetVersion();
if ((cygenv = getenv("CYGWIN")) == NULL) cygenv = "";
/* Produce some debugging on stderr,
cannot yet use exim's debug functions.
Exim does not use -c and ignores -n.
Set lower priority for daemons */
for (i = 1; i < argc; i++) {
if (argv[i][0] == '-') {
if (argv[i][1] == 'c') {
argv[i][1] = 'n'; /* Replace -c by -n */
cygwin_debug = TRUE;
fprintf(stderr, "CYGWIN = \"%s\".", cygenv);
cygwin_conv_to_win32_path("/", win32_path);
fprintf(stderr, " Root / mapped to %s.\n", win32_path);
}
else if (argv[i][1] == 'b' && argv[i][2] == 'd')
setpriority();
}
}
if (VERSION_IS_58M(cygwin_WinVersion)) {
* (uid_t *) rup = myuid; /* Pretend we are root */
* (uid_t *) eup = myuid; /* ... and exim */
* (gid_t *) egp = mygid;
return;
}
/* Nt/2000/XP
We initially set the exim uid & gid to those of the "real exim",
or to the root uid (SYSTEM) and exim gid (ADMINS),
If privileged, we setuid to those.
We always set the configure uid to the system uid.
We always set the root uid to the real uid
to avoid useless execs following forks.
If not privileged and unable to chown,
we set the exim uid to our uid.
If unprivileged, we fake all subsequent setuid. */
priv_flags = get_privileges ();
privileged = !!(priv_flags & CREATE_BIT);
/* Get the system and admins uid from their sids,
or use the default values from the Makefile. */
if ((systemuid = cygwin_internal(CW_GET_UID_FROM_SID, & SystemSid)) == -1)
systemuid = * (uid_t *) eup;
if ((adminsgid = cygwin_internal(CW_GET_GID_FROM_SID, & AdminsSid)) == -1)
adminsgid = * (gid_t *) egp;
if ((pwp = getpwnam("exim")) != NULL) {
* (uid_t *) eup = pwp->pw_uid; /* Set it according to passwd */
* (gid_t *) egp = pwp->pw_gid;
}
else {
* (uid_t *) eup = systemuid;
* (gid_t *) egp = adminsgid;
}
/* Set the configuration uid to the system uid.
Note that exim uid is also accepted as owner of exim.conf. */
* (uid_t *) cup = systemuid;
if (privileged) { /* Can setuid */
if (cygwin_setgid(* (gid_t *) egp) /* Setuid to exim */
|| cygwin_setuid(* (uid_t *) eup))
privileged = -1; /* Problem... Perhaps not in 544 */
}
/* Pretend we are root to avoid useless execs.
We are limited by file access rights */
* (uid_t *) rup = getuid ();
/* If we have not setuid to exim and cannot chown,
set the exim uid to our uid to avoid chown failures */
if (privileged <= 0 && !(priv_flags & RESTORE_BIT))
* (uid_t *) eup = * (uid_t *) rup;
if (cygwin_debug) {
fprintf(stderr, "Starting uid %ld, gid %ld, ntsec %lu, privileged %d.\n",
myuid, mygid, cygwin_internal(CW_CHECK_NTSEC, NULL), privileged);
fprintf(stderr, "root_uid %ld, exim_uid %ld, exim_gid %ld, config_uid %ld.\n",
* (uid_t *) rup, * (uid_t *) eup, * (gid_t *) egp, * (uid_t *) cup);
}
return;
}
/*****************************************************************
*
Functions for average load measurements
Obtaining statistics in Windows is done at a low level by
calling registry functions, in particular the key
HKEY_PERFORMANCE_DATA on NT and successors.
Something equivalent exists on Win95, see Microsoft article
HOWTO: Access the Performance Registry Under Windows 95 (Q174631)
but it is not implemented here.
The list of objects to be polled is specified in the string
passed to RegQueryValueEx in ReadStat() below.
On NT, all objects are polled even if info about only one is
required. This is fixed in Windows 2000. See articles
INFO: Perflib Calling Close Procedure in Windows 2000 (Q270127)
INFO: Performance Data Changes Between Windows NT 4.0 and Windows
2000 (Q296523)
It is unclear to me how the counters are primarily identified.
Whether it's by name strings or by the offset of their strings
as mapped in X:\Winnt\system32\perfc009.dat [or equivalently as
reported by the registry functions in GetNameStrings( ) below].
Microsoft documentation seems to say that both methods should
work.
In the interest of speed and language independence, the main
code below relies on offsets. However if debug is enabled, the
code verifies that the names of the corresponding strings are
as expected.
*****************************************************************/
#ifndef OS_LOAD_AVERAGE /* Can be set on command line */
#define OS_LOAD_AVERAGE /* src/os.c need not provide it */
/* Object and counter indices and names */
#define PROCESSOR_OBJECT_INDEX 238
#define PROCESSOR_OBJECT_STRING "238"
#define PROCESSOR_OBJECT_NAME "Processor"
#define PROCESSOR_TIME_COUNTER 6
#define PROCESSOR_TIME_NAME "% Processor Time"
/* Structure to compute the load average efficiently */
static struct {
long long Time100ns; /* Last measurement time */
long long IdleCount; /* Latest cumulative idle time */
long long LastCounter; /* Last measurement counter */
long long PerfFreq; /* Perf counter frequency */
PPERF_DATA_BLOCK PerfData; /* Pointer to a buffer to get the data */
DWORD BufferSize; /* Size of PerfData */
int LastLoad; /* Last reported load, or -1 */
LPSTR * NamesArray; /* Temporary (malloc) buffer for index */
BOOL Init; /* True if initialized */
} cygwin_load = { 0, 0, 0, 0, NULL, 0, 0, NULL, FALSE};
#define BYTEINCREMENT 800 /* Block to add to PerfData */
/*****************************************************************
*
Macros to navigate through the performance data.
*****************************************************************/
#define FirstObject(PerfData)\
((PPERF_OBJECT_TYPE)((PBYTE)PerfData + PerfData->HeaderLength))
#define NextObject(PerfObj)\
((PPERF_OBJECT_TYPE)((PBYTE)PerfObj + PerfObj->TotalByteLength))
#define ObjectCounterBlock(PerfObj)\
((PPERF_COUNTER_BLOCK)(PBYTE)PerfObj + PerfObj->DefinitionLength )
#define FirstInstance(PerfObj )\
((PPERF_INSTANCE_DEFINITION)((PBYTE)PerfObj + PerfObj->DefinitionLength))
#define InstanceCounterBlock(PerfInst)\
((PPERF_COUNTER_BLOCK) ((PBYTE)PerfInst + PerfInst->ByteLength ))
#define NextInstance(PerfInst )\
((PPERF_INSTANCE_DEFINITION)((PBYTE)InstanceCounterBlock(PerfInst) + \
InstanceCounterBlock(PerfInst)->ByteLength) )
#define FirstCounter(PerfObj)\
((PPERF_COUNTER_DEFINITION) ((PBYTE)PerfObj + PerfObj->HeaderLength))
#define NextCounter(PerfCntr)\
((PPERF_COUNTER_DEFINITION)((PBYTE)PerfCntr + PerfCntr->ByteLength))
/*****************************************************************
*
Load the counter and object names from the registry
to cygwin_load.NameStrings
and index them in cygwin_load.NamesArray
NameStrings seems to be taken from the file
X:\Winnt\system32\perfc009.dat
This is used only for name verification during initialization,
if DEBUG(D_load) is TRUE.
*****************************************************************/
static BOOL GetNameStrings( )
{
HKEY hKeyPerflib; // handle to registry key
DWORD dwArraySize; // size for array
DWORD dwNamesSize; // size for strings
LPSTR lpCurrentString; // pointer for enumerating data strings
DWORD dwCounter; // current counter index
LONG res;
/* Get the number of Counter items into dwArraySize. */
if ((res = RegOpenKeyEx( HKEY_LOCAL_MACHINE,
"SOFTWARE\\Microsoft\\Windows NT\\CurrentVersion\\Perflib",
0,
KEY_QUERY_VALUE, /* KEY_READ, */
&hKeyPerflib))
!= ERROR_SUCCESS) {
DEBUG(D_load) debug_printf("RegOpenKeyEx (1): error %ld (Windows)\n", res);
return FALSE;
}
dwNamesSize = sizeof(dwArraySize); /* Temporary reuse */
if ((res = RegQueryValueEx( hKeyPerflib,
"Last Counter",
NULL,
NULL,
(LPBYTE) &dwArraySize,
&dwNamesSize ))
!= ERROR_SUCCESS) {
DEBUG(D_load) debug_printf("RegQueryValueEx (1): error %ld (Windows)\n", res);
return FALSE;
}
RegCloseKey( hKeyPerflib );
/* Open the key containing the counter and object names. */
if ((res = RegOpenKeyEx( HKEY_LOCAL_MACHINE,
"SOFTWARE\\Microsoft\\Windows NT\\CurrentVersion\\Perflib\\009",
0,
KEY_READ,
&hKeyPerflib))
!= ERROR_SUCCESS) {
DEBUG(D_load) debug_printf("RegOpenKeyEx (2): error %ld (Windows)\n", res);
return FALSE;
}
/* Get the size of the Counter value in the key
and then read the value in the tail of NamesArray */
dwNamesSize = 0;
lpCurrentString = NULL;
while (1) {
res = RegQueryValueEx( hKeyPerflib,
"Counter",
NULL,
NULL,
(unsigned char *) lpCurrentString,
&dwNamesSize);
if ((res == ERROR_SUCCESS) && /* Bug (NT 4.0): SUCCESS was returned on first call */
(cygwin_load.NamesArray != NULL)) break;
if ((res == ERROR_SUCCESS) || /* but cygwin_load.NamesArrays == NULL */
(res == ERROR_MORE_DATA)) {
/* Allocate memory BOTH for the names array and for the counter and object names */
if ((cygwin_load.NamesArray =
(LPSTR *) malloc( (dwArraySize + 1) * sizeof(LPSTR) + dwNamesSize * sizeof(CHAR)))
!= NULL) {
/* Point to area for the counter and object names */
lpCurrentString = (LPSTR) & cygwin_load.NamesArray[dwArraySize + 1];
continue;
}
DEBUG(D_load) debug_printf("Malloc: errno %d (%s)\n", errno, strerror(errno));
}
else { /* Serious error */
DEBUG(D_load) debug_printf("RegQueryValueEx (2): error %ld (Windows)\n", res);
}
return FALSE;
}
RegCloseKey( hKeyPerflib );
/* Index the names into an array. */
while (*lpCurrentString) {
dwCounter = atol( lpCurrentString );
lpCurrentString += (lstrlen(lpCurrentString)+1);
cygwin_load.NamesArray[dwCounter] = lpCurrentString;
lpCurrentString += (strlen(lpCurrentString)+1);
}
return TRUE;
}
/*****************************************************************
*
Find the value of the Processor Time counter
*****************************************************************/
static BOOL ReadTimeCtr(PPERF_OBJECT_TYPE PerfObj,
PPERF_COUNTER_DEFINITION CurCntr,
PPERF_COUNTER_BLOCK PtrToCntr,
unsigned long long * TimePtr){
int j;
/* Scan all counters. */
for( j = 0; j < PerfObj->NumCounters; j++ ) {
if (CurCntr->CounterNameTitleIndex == PROCESSOR_TIME_COUNTER) {
/* Verify it is really the proc time counter */
if ((CurCntr->CounterType != PERF_100NSEC_TIMER_INV) || /* Wrong type */
((cygwin_load.NamesArray != NULL) && /* Verify name */
(strcmp(cygwin_load.NamesArray[CurCntr->CounterNameTitleIndex],
PROCESSOR_TIME_NAME)))) {
log_write(0, LOG_MAIN|LOG_PANIC,
"Incorrect Perf counter type or name %x %s",
(unsigned) CurCntr->CounterType,
cygwin_load.NamesArray[CurCntr->CounterNameTitleIndex]);
return FALSE;
}
*TimePtr += *(unsigned long long int *) ((PBYTE) PtrToCntr + CurCntr->CounterOffset);
return TRUE; /* return TRUE as soon as we found the counter */
}
/* Get the next counter. */
CurCntr = NextCounter( CurCntr );
}
return FALSE;
}
/*****************************************************************
*
ReadStat()
Measures current Time100ns and IdleCount
Return TRUE if success.
*****************************************************************/
static BOOL ReadStat(long long int *Time100nsPtr,
long long int * IdleCountPtr)
{
PPERF_OBJECT_TYPE PerfObj;
PPERF_INSTANCE_DEFINITION PerfInst;
PPERF_COUNTER_DEFINITION PerfCntr;
PPERF_COUNTER_BLOCK PtrToCntr;
DWORD i, k, res;
/* Get the performance data for the Processor object
There is no need to open a key.
We may need to blindly increase the buffer size.
BufferSize does not return info but may be changed */
while (1) {
DWORD BufferSize = cygwin_load.BufferSize;
res = RegQueryValueEx( HKEY_PERFORMANCE_DATA,
PROCESSOR_OBJECT_STRING,
NULL,
NULL,
(LPBYTE) cygwin_load.PerfData,
&BufferSize );
if (res == ERROR_SUCCESS) break;
if (res == ERROR_MORE_DATA ) {
/* Increment if necessary to get a buffer that is big enough. */
cygwin_load.BufferSize += BYTEINCREMENT;
if ((cygwin_load.PerfData =
(PPERF_DATA_BLOCK) realloc( cygwin_load.PerfData, cygwin_load.BufferSize ))
!= NULL) continue;
DEBUG(D_load) debug_printf("Malloc: errno %d (%s)\n", errno, strerror(errno));
}
else { /* Serious error */
DEBUG(D_load) debug_printf("RegQueryValueEx (3): error %ld (Windows)\n", res);
}
return FALSE;
}
/* Initialize the counters */
*Time100nsPtr = 0;
*IdleCountPtr = 0;
/* We should only have one object, but write general code just in case. */
PerfObj = FirstObject( cygwin_load.PerfData );
for( i = 0; i < cygwin_load.PerfData->NumObjectTypes; i++ ) {
/* We are only interested in the processor object */
if ( PerfObj->ObjectNameTitleIndex == PROCESSOR_OBJECT_INDEX) {
/* Possibly verify it is really the Processor object. */
if ((cygwin_load.NamesArray != NULL) &&
(strcmp(cygwin_load.NamesArray[PerfObj->ObjectNameTitleIndex],
PROCESSOR_OBJECT_NAME))) {
log_write(0, LOG_MAIN|LOG_PANIC,
"Incorrect Perf object name %s",
cygwin_load.NamesArray[PerfObj->ObjectNameTitleIndex]);
return FALSE;
}
/* Get the first counter */
PerfCntr = FirstCounter( PerfObj );
/* See if the object has instances.
It should, but write general code. */
if( PerfObj->NumInstances != PERF_NO_INSTANCES ) {
PerfInst = FirstInstance( PerfObj );
for( k = 0; k < PerfObj->NumInstances; k++ ) {
/* There can be several processors.
Accumulate both the Time100ns and the idle counter.
On Win 2000 I have seen an instance named "_Total".
Do not use it. We only use instances with a single
character in the name.
If we examine the object names, we also look at the instance
names and their lengths and issue reports */
if ( cygwin_load.NamesArray != NULL) {
CHAR ascii[30]; /* The name is in unicode */
wsprintf(ascii,"%.29lS",
(char *)((PBYTE)PerfInst + PerfInst->NameOffset));
log_write(0, LOG_MAIN,
"Perf: Found processor instance \"%s\", length %d",
ascii, PerfInst->NameLength);
if ((PerfInst->NameLength != 4) &&
(strcmp(ascii, "_Total") != 0)) {
log_write(0, LOG_MAIN|LOG_PANIC,
"Perf: WARNING: Unexpected processor instance name");
return FALSE;
}
}
if (PerfInst->NameLength == 4) {
*Time100nsPtr += cygwin_load.PerfData->PerfTime100nSec.QuadPart;
PtrToCntr = InstanceCounterBlock(PerfInst);
if (! ReadTimeCtr(PerfObj, PerfCntr, PtrToCntr, IdleCountPtr)) {
return FALSE;
}
}
PerfInst = NextInstance( PerfInst );
}
return (*Time100nsPtr != 0); /* Something was read */
}
else { /* No instance, just the counter data */
*Time100nsPtr = cygwin_load.PerfData->PerfTime100nSec.QuadPart;
PtrToCntr = ObjectCounterBlock(PerfObj);
return ReadTimeCtr(PerfObj, PerfCntr, PtrToCntr, IdleCountPtr);
}
}
PerfObj = NextObject( PerfObj );
}
return FALSE; /* Did not find the Processor object */
}
/*****************************************************************
*
InitLoadAvg()
Initialize the cygwin_load structure.
and set cygwin_load.Flag to TRUE if successful.
This is called the first time os_getloadavg is called
*****************************************************************/
static void InitLoadAvg()
{
BOOL success = TRUE;
cygwin_load.Init = TRUE; /* We have run */
/* Get perf frequency and counter */
QueryPerformanceFrequency((LARGE_INTEGER *)& cygwin_load.PerfFreq);
QueryPerformanceCounter((LARGE_INTEGER *)& cygwin_load.LastCounter);
DEBUG(D_load) {
/* Get the name strings through the registry
to verify that the object and counter numbers
have the names we expect */
success = GetNameStrings();
}
/* Get initial values for Time100ns and IdleCount
and possibly verify the names */
// success = success &&
success = ReadStat( & cygwin_load.Time100ns,
& cygwin_load.IdleCount);
/* If success, set the Load to 0, else to -1 */
if (success) cygwin_load.LastLoad = 0;
else {
log_write(0, LOG_MAIN, "Cannot obtain Load Average");
cygwin_load.LastLoad = -1;
}
/* Free the buffer created for debug name verification */
if (cygwin_load.NamesArray != NULL) {
free(cygwin_load.NamesArray);
cygwin_load.NamesArray = NULL;
}
}
/*****************************************************************
*
os_getloadavg()
Return -1 if not available;
Return the previous value if less than AVERAGING sec old.
else return the processor load on a [0 - 1000] scale.
The first time we are called we initialize the counts
and return 0 or -1.
The load cannot be measured because we use the processor 100%
*****************************************************************/
#define AVERAGING 10
int os_getloadavg()
{
long long Time100ns, IdleCount, CurrCounter;
int value;
if (! cygwin_load.Init) InitLoadAvg();
else if (cygwin_load.LastLoad >= 0) { /* Initialized OK */
/* Get the current time (PerfCounter) */
QueryPerformanceCounter((LARGE_INTEGER *)& CurrCounter);
/* Calls closer than AVERAGING sec apart use the previous value */
if (CurrCounter - cygwin_load.LastCounter >
AVERAGING * cygwin_load.PerfFreq) {
/* Get Time100ns and IdleCount */
if (ReadStat( & Time100ns, & IdleCount)) { /* Success */
/* Return processor load on 1000 scale */
value = 1000 - ((1000 * (IdleCount - cygwin_load.IdleCount)) /
(Time100ns - cygwin_load.Time100ns));
cygwin_load.Time100ns = Time100ns;
cygwin_load.IdleCount = IdleCount;
cygwin_load.LastCounter = CurrCounter;
cygwin_load.LastLoad = value;
}
else { /* Something bad happened.
Refuse to measure the load anymore
but don't bother releasing the buffer */
log_write(0, LOG_MAIN, "Cannot obtain Load Average");
cygwin_load.LastLoad = -1;
}
}
}
DEBUG(D_load)
debug_printf("Perf: load average = %d\n", cygwin_load.LastLoad);
return cygwin_load.LastLoad;
}
#endif /* OS_LOAD_AVERAGE */
#endif /* COMPILE_UTILITY */
Index: os.h-AIX
====================================================================
/* $Cambridge: exim/exim-src/OS/os.h-AIX,v 1.1 2004/10/06 15:07:39 ph10 Exp $ */
/* Exim: OS-specific C header file for AIX */
/* Written by Nick Waterman <nick@???> */
/* Modified by Philip Hazel with data from
Niels Provos <provos@???>
Juozas Simkevicius <juozas@???> for load averages
*/
#define HAVE_DEV_KMEM
#define LOAD_AVG_SYMBOL "avenrun"
#define KERNEL_PATH "/unix"
#define LOAD_AVG_TYPE int
#define FSCALE 65536.0
#define HAVE_SYS_VFS_H
#define HAVE_SYS_STATFS_H
/* Now tell AIX to emulate BSD as badly as it can. */
#define _BSD 44
typedef struct flock flock_t;
/* End */
Index: os.h-BSDI
====================================================================
/* $Cambridge: exim/exim-src/OS/os.h-BSDI,v 1.1 2004/10/06 15:07:39 ph10 Exp $ */
/* Exim: OS-specific C header file for BSDI */
#define HAVE_BSD_GETLOADAVG
#define HAVE_MMAP
#define HAVE_SYS_MOUNT_H
#define SIOCGIFCONF_GIVES_ADDR
typedef struct flock flock_t;
/* End */
Index: os.h-DGUX
====================================================================
/* $Cambridge: exim/exim-src/OS/os.h-DGUX,v 1.1 2004/10/06 15:07:39 ph10 Exp $ */
/* Exim: OS-specific C header file for DGUX */
/* Written by Ken Bailey (K.Bailey@???) Feb 1998 */
/* on dgux R4.11MU04 generic AViiON mc88100 */
/* Modified Dec 1998 by PH after message from Ken. */
#define HAVE_SYS_STATVFS_H
#define F_FAVAIL f_favail
#define NO_SYSEXITS /* DGUX doesn't ship sysexits.h */
#define NO_IP_VAR_H /* DGUX has no netinet/ip_var.h */
#define os_strsignal dg_strsignal
#define OS_STRSIGNAL
#define HAVE_MMAP
/* The definition of ipoptions in netinet/in.h (masquerading as ip_opts) used
in smtp_in.c is for Intel DG _IX86_ABI only. You may be able to get this to
work on Intel DG but it's certainly easier to skip it on M88k. This means we
forego the detection of some source-routing based IP attacks. */
#define NO_IP_OPTIONS
/* End */
Index: os.h-Darwin
====================================================================
/* $Cambridge: exim/exim-src/OS/os.h-Darwin,v 1.1 2004/10/06 15:07:39 ph10 Exp $ */
/* Exim: OS-specific C header file for Darwin (Mac OS X) */
/* #define CRYPT_H */ /* Apparently this isn't needed */
#define HAVE_MMAP
#define HAVE_SYS_MOUNT_H
#define PAM_H_IN_PAM
#define SIOCGIFCONF_GIVES_ADDR
#define F_FREESP O_TRUNC
typedef struct flock flock_t;
#define BASE_62 36 /* HFS+ aliases lower and upper cases in filenames.
Consider reducing MAX_LOCALHOST_NUMBER */
#ifndef _BSD_SOCKLEN_T_
#define _BSD_SOCKLEN_T_ int32_t /* socklen_t (duh) */
#endif
/* Settings for handling IP options. There's no netinet/ip_var.h. The IP
option handling is in the style of the later GLIBCs but the GLIBC macros
aren't set, so we invent a new one. */
#define NO_IP_VAR_H
#define DARWIN_IP_OPTIONS
/* End */
Index: os.h-FreeBSD
====================================================================
/* $Cambridge: exim/exim-src/OS/os.h-FreeBSD,v 1.1 2004/10/06 15:07:39 ph10 Exp $ */
/* Exim: OS-specific C header file for FreeBSD */
#define HAVE_BSD_GETLOADAVG
#define HAVE_MMAP
#define HAVE_SYS_MOUNT_H
#define SIOCGIFCONF_GIVES_ADDR
typedef struct flock flock_t;
/* End */
Index: os.h-GNU
====================================================================
/* $Cambridge: exim/exim-src/OS/os.h-GNU,v 1.1 2004/10/06 15:07:39 ph10 Exp $ */
/* Exim: OS-specific C header file for GNU/Hurd */
#define CRYPT_H
#define HAVE_MMAP
#define HAVE_SYS_VFS_H
#define NO_IP_VAR_H
#define NO_NET_IF_H
#define NO_FIND_INTERFACES
#define SETRLIMIT_NOT_SUPPORTED
#define GLIBC_IP_OPTIONS
#define F_FREESP O_TRUNC
typedef struct flock flock_t;
#define os_strsignal strsignal
#define OS_STRSIGNAL
/* End */
Index: os.h-HI-OSF
====================================================================
/* $Cambridge: exim/exim-src/OS/os.h-HI-OSF,v 1.1 2004/10/06 15:07:39 ph10 Exp $ */
/* Exim: OS-specific C header file for HI-OSF/1-MJ and HI-UX/MPP */
#define HAVE_SYS_MOUNT_H
typedef struct flock flock_t;
#define F_FREESP O_TRUNC
#define DN_EXPAND_ARG4_TYPE u_char *
/* End */
Index: os.h-HI-UX
====================================================================
/* $Cambridge: exim/exim-src/OS/os.h-HI-UX,v 1.1 2004/10/06 15:07:39 ph10 Exp $ */
/* Exim: OS-specific C header file for HI-UX */
#define LOAD_AVG_NEEDS_ROOT
#define HAVE_DEV_KMEM
#define LOAD_AVG_TYPE double
#define LOAD_AVG_SYMBOL "avenrun"
#define KERNEL_PATH "/HI-UX"
#define FSCALE 1.0
#define HAVE_SYS_VFS_H
#define SELECT_ARG2_TYPE int
#define F_FREESP O_TRUNC
#define NEED_H_ERRNO 1
typedef struct flock flock_t;
/* End */
Index: os.h-HP-UX
====================================================================
/* $Cambridge: exim/exim-src/OS/os.h-HP-UX,v 1.1 2004/10/06 15:07:39 ph10 Exp $ */
/* Exim: OS-specific C header file for HP-UX versions greater than 9 */
#define LOAD_AVG_NEEDS_ROOT
#define HAVE_DEV_KMEM
#define LOAD_AVG_TYPE double
#define LOAD_AVG_SYMBOL "avenrun"
#define KERNEL_PATH "/hp-ux"
#define FSCALE 1.0
#define HAVE_SYS_STATVFS_H
#define F_FREESP O_TRUNC
#define NEED_H_ERRNO 1
typedef struct flock flock_t;
/* End */
Index: os.h-HP-UX-9
====================================================================
/* $Cambridge: exim/exim-src/OS/os.h-HP-UX-9,v 1.1 2004/10/06 15:07:39 ph10 Exp $ */
/* Exim: OS-specific C header file for HP-UX version 9 */
#define LOAD_AVG_NEEDS_ROOT
#define HAVE_DEV_KMEM
#define LOAD_AVG_TYPE double
#define LOAD_AVG_SYMBOL "avenrun"
#define KERNEL_PATH "/hp-ux"
#define FSCALE 1.0
#define HAVE_SYS_VFS_H
#define SELECT_ARG2_TYPE int
#define F_FREESP O_TRUNC
#define NEED_H_ERRNO 1
#define killpg(pgid,sig) kill(-(pgid),sig)
typedef struct flock flock_t;
/* End */
Index: os.h-IRIX
====================================================================
/* $Cambridge: exim/exim-src/OS/os.h-IRIX,v 1.1 2004/10/06 15:07:39 ph10 Exp $ */
/* Exim: OS-specific C header file for IRIX */
#define DN_EXPAND_ARG4_TYPE u_char *
#define LOAD_AVG_NEEDS_ROOT
#define HAVE_DEV_KMEM
#define LOAD_AVG_TYPE long
#define LOAD_AVG_SYMBOL "avenrun"
#define KERNEL_PATH "/unix"
#define FSCALE 1000.0
#define HAVE_MMAP
#define HAVE_SYS_STATVFS_H
#define F_FAVAIL f_favail
#define vfork fork
/* Other OS have "const" in here */
#define ICONV_ARG2_TYPE char **
/* End */
Index: os.h-IRIX6
====================================================================
/* $Cambridge: exim/exim-src/OS/os.h-IRIX6,v 1.1 2004/10/06 15:07:39 ph10 Exp $ */
/* Exim: OS-specific C header file for IRIX */
#define CRYPT_H
#define LOAD_AVG_NEEDS_ROOT
#define HAVE_DEV_KMEM
#define LOAD_AVG_TYPE long
#define LOAD_AVG_SYMBOL "avenrun"
#define KERNEL_PATH "/unix"
#define FSCALE 1000.0
#define HAVE_MMAP
#define HAVE_SYS_STATVFS_H
#define F_FAVAIL f_favail
#define vfork fork
/* Other OS have "const" in here */
#define ICONV_ARG2_TYPE char **
/* End */
Index: os.h-IRIX632
====================================================================
/* $Cambridge: exim/exim-src/OS/os.h-IRIX632,v 1.1 2004/10/06 15:07:39 ph10 Exp $ */
/* Exim: OS-specific C header file for IRIX */
#define CRYPT_H
#define DN_EXPAND_ARG4_TYPE u_char *
#define LOAD_AVG_NEEDS_ROOT
#define HAVE_DEV_KMEM
#define LOAD_AVG_TYPE long
#define LOAD_AVG_SYMBOL "avenrun"
#define KERNEL_PATH "/unix"
#define FSCALE 1000.0
#define HAVE_MMAP
#define HAVE_SYS_STATVFS_H
#define F_FAVAIL f_favail
#define vfork fork
/* Other OS have "const" in here */
#define ICONV_ARG2_TYPE char **
/* End */
Index: os.h-IRIX65
====================================================================
/* $Cambridge: exim/exim-src/OS/os.h-IRIX65,v 1.1 2004/10/06 15:07:39 ph10 Exp $ */
/* Exim: OS-specific C header file for IRIX 6.5 */
#define CRYPT_H
#define LOAD_AVG_NEEDS_ROOT
#define HAVE_DEV_KMEM
#define LOAD_AVG_TYPE long
#define LOAD_AVG_SYMBOL "avenrun"
#define KERNEL_PATH "/unix"
#define FSCALE 1000.0
#define HAVE_MMAP
#define HAVE_SYS_STATVFS_H
#define F_FAVAIL f_favail
#define vfork fork
/* Other OS have "const" in here */
#define ICONV_ARG2_TYPE char **
/* End */
Index: os.h-Linux
====================================================================
/* $Cambridge: exim/exim-src/OS/os.h-Linux,v 1.1 2004/10/06 15:07:39 ph10 Exp $ */
/* Exim: OS-specific C header file for Linux */
#define CRYPT_H
#define GLIBC_IP_OPTIONS
#define HAVE_MMAP
#define HAVE_SYS_VFS_H
#define NO_IP_VAR_H
#define SIOCGIFCONF_GIVES_ADDR
#define SIG_IGN_WORKS
/* Some versions of Linux need explicit sync-ing of directories as well as
files. This setting requests that. If the directory is on NFS, it may not
be possible to sync it - in that case, Exim now should ignore the error. But
if you have problems in that area, try undefining this. But be aware that you
may be in a situation where files are not being properly "committed to stable
storage" as quickly as Exim thinks they are. */
#define NEED_SYNC_DIRECTORY
/* Other OS have "const" in here */
#define ICONV_ARG2_TYPE char **
#define F_FREESP O_TRUNC
typedef struct flock flock_t;
#define os_strsignal strsignal
#define OS_STRSIGNAL
#define os_find_running_interfaces os_find_running_interfaces_linux
/* Need a prototype for the Linux-specific function. The structure hasn't
been defined yet, so we need to pre-declare it. */
struct ip_address_item;
extern struct ip_address_item *os_find_running_interfaces_linux(void);
/* End */
Index: os.h-Linux-libc5
====================================================================
/* $Cambridge: exim/exim-src/OS/os.h-Linux-libc5,v 1.1 2004/10/06 15:07:39 ph10 Exp $ */
/* Exim: OS-specific C header file for Linux */
#define HAVE_MMAP
#define HAVE_SYS_VFS_H
#define NO_IP_VAR_H
#define GLIBC_IP_OPTIONS
#define F_FREESP O_TRUNC
typedef struct flock flock_t;
/* End */
Index: os.h-NetBSD
====================================================================
/* $Cambridge: exim/exim-src/OS/os.h-NetBSD,v 1.1 2004/10/06 15:07:39 ph10 Exp $ */
/* Exim: OS-specific C header file for NetBSD */
#define HAVE_BSD_GETLOADAVG
#define HAVE_MMAP
#define HAVE_SYS_MOUNT_H
#define SIOCGIFCONF_GIVES_ADDR
typedef struct flock flock_t;
#define os_strsignal strsignal
#define OS_STRSIGNAL
/* End */
Index: os.h-NetBSD-a.out
====================================================================
/* $Cambridge: exim/exim-src/OS/os.h-NetBSD-a.out,v 1.1 2004/10/06 15:07:39 ph10 Exp $ */
/* Exim: OS-specific C header file for NetBSD (a.out binary format) */
#include "../OS/os.h-NetBSD" /* Same as for ELF format */
/* End */
Index: os.h-OSF1
====================================================================
/* $Cambridge: exim/exim-src/OS/os.h-OSF1,v 1.1 2004/10/06 15:07:39 ph10 Exp $ */
/* Exim: OS-specific C header file for OSF1 */
#define HAVE_SYS_MOUNT_H
#define HAVE_GETIPNODEBYNAME 1
typedef struct flock flock_t;
#define F_FREESP O_TRUNC
#define SOCKLEN_T size_t
/* End */
Index: os.h-OpenBSD
====================================================================
/* $Cambridge: exim/exim-src/OS/os.h-OpenBSD,v 1.1 2004/10/06 15:07:39 ph10 Exp $ */
/* Exim: OS-specific C header file for OpenBSD */
#define HAVE_BSD_GETLOADAVG
#define HAVE_MMAP
#define HAVE_SYS_MOUNT_H
#define SIOCGIFCONF_GIVES_ADDR
typedef struct flock flock_t;
#define os_strsignal strsignal
#define OS_STRSIGNAL
/* End */
Index: os.h-OpenUNIX
====================================================================
/* $Cambridge: exim/exim-src/OS/os.h-OpenUNIX,v 1.1 2004/10/06 15:07:39 ph10 Exp $ */
/* Exim: OS-specific C header file for OpenUNIX */
#define NO_SYSEXITS
#define LOAD_AVG_NEEDS_ROOT
#define HAVE_DEV_KMEM
#define LOAD_AVG_TYPE short
#define LOAD_AVG_SYMBOL "avenrun"
#define KERNEL_PATH "/stand/unix"
#define FSCALE 256
#define HAVE_SYS_STATVFS_H
#define _SVID3
#define NEED_H_ERRNO
/* End */
Index: os.h-QNX
====================================================================
/* $Cambridge: exim/exim-src/OS/os.h-QNX,v 1.1 2004/10/06 15:07:39 ph10 Exp $ */
/* Exim: OS-specific C header file for QNX */
/* Modified for QNX 6.2.0 with diffs from Samuli Tuomola. */
#include <sys/select.h>
/* This include is wrapped in an ifdef so as to be skipped for QNXRTP, which
doesn't have/need this header file. From Karsten P. Hoffmann. */
#ifdef __QNX__
#include <unix.h>
#endif
#undef HAVE_STATFS
#undef HAVE_VFS_H
#undef HAVE_SYS_MOUNT_H
#define NO_SYSEXITS
extern int h_errno;
/* End */
Index: os.h-SCO
====================================================================
/* $Cambridge: exim/exim-src/OS/os.h-SCO,v 1.1 2004/10/06 15:07:39 ph10 Exp $ */
/* Exim: OS-specific C header file for SCO */
#define DN_EXPAND_ARG4_TYPE u_char *
#define LOAD_AVG_NEEDS_ROOT
#define HAVE_DEV_KMEM
#define LOAD_AVG_TYPE short
#define LOAD_AVG_SYMBOL "avenrun"
#define KERNEL_PATH "/unix"
#define FSCALE 256
#define SOCKLEN_T int
#define HAVE_SYS_STATVFS_H
#define F_FAVAIL f_favail
#define _SVID3
#define NEED_H_ERRNO
/* End */
Index: os.h-SCO_SV
====================================================================
/* $Cambridge: exim/exim-src/OS/os.h-SCO_SV,v 1.1 2004/10/06 15:07:39 ph10 Exp $ */
/* Exim: OS-specific C header file for SCO_SV */
#define LOAD_AVG_NEEDS_ROOT
#define HAVE_DEV_KMEM
#define LOAD_AVG_TYPE short
#define LOAD_AVG_SYMBOL "avenrun"
#define KERNEL_PATH "/unix"
#define FSCALE 256
#define SOCKLEN_T int
#define HAVE_SYS_STATVFS_H
#define F_FAVAIL f_favail
#define _SVID3
#define NEED_H_ERRNO
/* End */
Index: os.h-SunOS4
====================================================================
/* $Cambridge: exim/exim-src/OS/os.h-SunOS4,v 1.1 2004/10/06 15:07:39 ph10 Exp $ */
/* Exim: OS-specific C header file for SunOS4 */
#define LOAD_AVG_NEEDS_ROOT
#define HAVE_DEV_KMEM
#define LOAD_AVG_TYPE long
#define LOAD_AVG_SYMBOL "_avenrun"
#define KERNEL_PATH "/vmunix"
#define HAVE_MMAP
#define HAVE_SYS_VFS_H
#define F_FREESP O_TRUNC
#define EXIT_FAILURE 1
#define EXIT_SUCCESS 0
typedef struct flock flock_t;
#define STRERROR_FROM_ERRLIST
#define memmove(a, b, c) bcopy(b, a, c)
#define strtoul(str, ptr, base) ((unsigned int)strtol((str),(ptr),(base)))
extern char *strerror(int);
extern int sys_nerr;
extern char *sys_errlist[];
/* In ANSI C strtod() is defined in stdlib.h, but in SunOS4 it is defined in
floatingpoint.h which is called from math.h, which Exim doesn't include. */
extern double strtod(const char *, char **);
/* SunOS4 seems to define getc, ungetc, feof and ferror as macros only, not
as functions. We need to have them as assignable functions. Setting this
flag causes this to get done in exim.h. */
#define FUDGE_GETC_AND_FRIENDS
/* End */
Index: os.h-SunOS5
====================================================================
/* $Cambridge: exim/exim-src/OS/os.h-SunOS5,v 1.1 2004/10/06 15:07:39 ph10 Exp $ */
/* Exim: OS-specific C header file for SunOS5 aka Solaris */
#define CRYPT_H
#define HAVE_MMAP
#define HAVE_SYS_STATVFS_H
#define F_FAVAIL f_favail
#define SIOCGIFCONF_GIVES_ADDR
#define HAVE_GETIPNODEBYNAME 1
#define HAVE_GETIPNODEBYADDR 1
#define HAVE_KSTAT
#define LOAD_AVG_KSTAT "system_misc"
#define LOAD_AVG_KSTAT_MODULE "unix"
#define LOAD_AVG_SYMBOL "avenrun_1min"
#define LOAD_AVG_FIELD value.ui32
#define os_strsignal strsignal
#define OS_STRSIGNAL
/* This is needed for some early Solaris releases, but causes trouble
in the current ones, so it is out by default. */
/* #define SOCKLEN_T size_t */
/* This is different from Linux and all other PAM implementations,
it seems. */
#define PAM_CONVERSE_ARG2_TYPE struct pam_message
/* End */
Index: os.h-SunOS5-hal
====================================================================
/* $Cambridge: exim/exim-src/OS/os.h-SunOS5-hal,v 1.1 2004/10/06 15:07:39 ph10 Exp $ */
/* Exim: OS-specific C header file for SunOS5 on HAL */
#define HAVE_MMAP
#define HAVE_KSTAT
#define LOAD_AVG_KSTAT "system_misc"
#define LOAD_AVG_KSTAT_MODULE "unix"
#define LOAD_AVG_SYMBOL "avenrun_1min"
#define LOAD_AVG_FIELD value.ul
/* End */
Index: os.h-ULTRIX
====================================================================
/* $Cambridge: exim/exim-src/OS/os.h-ULTRIX,v 1.1 2004/10/06 15:07:39 ph10 Exp $ */
/* Exim: OS-specific C header file for Ultrix */
/* Well, it *does* have statfs(), but its structure is called something
different, all the members have different names, and the function returns
1 on success rather than 0. As this is for a minority function, and I think
a minority operating system, easiest just to say "no" until someone asks. */
#undef HAVE_STATFS
#define F_FREESP O_TRUNC
#define NEED_H_ERRNO
#define NO_OPENLOG
typedef struct flock flock_t;
/* End */
Index: os.h-UNIX_SV
====================================================================
/* $Cambridge: exim/exim-src/OS/os.h-UNIX_SV,v 1.1 2004/10/06 15:07:39 ph10 Exp $ */
/* Exim: OS-specific C header file for SCO SVR4.2 (and maybe Unixware) */
/**
*** Note that for SCO 5 the configuration file is called SCO_SV,
*** and that Unixware7 has its own configuration. This is an old
*** file that is retained for compatibility.
**/
#define NO_SYSEXITS
#define LOAD_AVG_NEEDS_ROOT
#define HAVE_DEV_KMEM
#define LOAD_AVG_TYPE short
#define LOAD_AVG_SYMBOL "avenrun"
#define KERNEL_PATH "/stand/unix"
#define FSCALE 256
#define HAVE_SYS_STATVFS_H
#define _SVID3
#define NEED_H_ERRNO
/* End */
Index: os.h-USG
====================================================================
/* $Cambridge: exim/exim-src/OS/os.h-USG,v 1.1 2004/10/06 15:07:39 ph10 Exp $ */
/* Exim: OS-specific C header file for Unixware 2.x */
#define NO_SYSEXITS
#define LOAD_AVG_NEEDS_ROOT
#define HAVE_DEV_KMEM
#define LOAD_AVG_TYPE short
#define LOAD_AVG_SYMBOL "avenrun"
#define KERNEL_PATH "/stand/unix"
#define FSCALE 256
#define HAVE_SYS_STATVFS_H
#define _SVID3
#define NEED_H_ERRNO
/* End */
Index: os.h-Unixware7
====================================================================
/* $Cambridge: exim/exim-src/OS/os.h-Unixware7,v 1.1 2004/10/06 15:07:39 ph10 Exp $ */
/* Exim: OS-specific C header file for Unixware 7 */
#define NO_SYSEXITS
#define ICONV_ARG2_TYPE char **
#define SOCKLEN_T size_t
#define LOAD_AVG_NEEDS_ROOT
#define HAVE_DEV_KMEM
#define LOAD_AVG_TYPE short
#define LOAD_AVG_SYMBOL "avenrun"
#define KERNEL_PATH "/stand/unix"
#define FSCALE 256
#define HAVE_SYS_STATVFS_H
#define _SVID3
#define NEED_H_ERRNO
/* End */
Index: os.h-cygwin
====================================================================
/* $Cambridge: exim/exim-src/OS/os.h-cygwin,v 1.1 2004/10/06 15:07:39 ph10 Exp $ */
/* Exim: OS-specific C header file for Cygwin */
/* This code was supplied by Pierre A. Humblet <Pierre.Humblet@???> */
/* Define the OS_INIT macro that we insert in exim.c:main()
to set the root and exim uid depending on the system */
/* We use a special routine to initialize */
void cygwin_init(int, char **, void *, void *, void *, void *);
#define OS_INIT\
cygwin_init(argc, (char **) argv, &root_uid, &exim_uid, &exim_gid, &config_uid);
/* We need a special mkdir that
allows names starting with // */
#include <sys/stat.h> /* Do not redefine mkdir in sys/stat.h */
int cygwin_mkdir( const char *_path, mode_t __mode );
#define mkdir cygwin_mkdir /* redefine mkdir elsewhere */
/* Redefine the set*id calls to run when faking root */
#include <unistd.h> /* Do not redefine in unitsd.h */
int cygwin_setuid(uid_t uid );
int cygwin_setgid(gid_t gid );
#define setuid cygwin_setuid
#define setgid cygwin_setgid
extern unsigned int cygwin_WinVersion;
#define BASE_62 36 /* Windows aliases lower and upper cases in filenames.
Consider reducing MAX_LOCALHOST_NUMBER */
#define CRYPT_H
#define HAVE_MMAP
#define HAVE_SYS_VFS_H
#define NO_IP_VAR_H
#define NO_IP_OPTIONS
#define F_FREESP O_TRUNC
/* Defining LOAD_AVG_NEEDS_ROOT causes an initial
call to os_getloadavg. In our case this is beneficial
because it initializes the counts */
#define LOAD_AVG_NEEDS_ROOT
typedef struct flock flock_t;
/* Macro to define variable length SID structures */
#define SID(n, name, sid...) \
struct { \
BYTE Revision; \
BYTE SubAuthorityCount; \
SID_IDENTIFIER_AUTHORITY IdentifierAuthority; \
DWORD SubAuthority[n]; \
} name = { SID_REVISION, n, {SECURITY_NT_AUTHORITY}, {sid}}
/* End */
Index: os.h-mips
====================================================================
/* $Cambridge: exim/exim-src/OS/os.h-mips,v 1.1 2004/10/06 15:07:39 ph10 Exp $ */
/* Exim: OS-specific C header file for RiscOS4bsd */
#define LOAD_AVG_NEEDS_ROOT
#define HAVE_DEV_KMEM
#define LOAD_AVG_TYPE long
#define LOAD_AVG_SYMBOL "_avenrun"
#define KERNEL_PATH "/unix"
#define HAVE_MMAP
#define HAVE_SYS_VFS_H
#define F_FREESP O_TRUNC
#define EXIT_FAILURE 1
#define EXIT_SUCCESS 0
typedef struct flock flock_t;
#define STRERROR_FROM_ERRLIST
#define memmove(a, b, c) bcopy(b, a, c)
extern char *strerror(int);
extern int sys_nerr;
extern char *sys_errlist[];
/* End */
Index: Configure
====================================================================
#! /bin/sh
# $Cambridge: exim/exim-src/scripts/Configure,v 1.1 2004/10/06 15:07:40 ph10 Exp $
# A script to be called to run all the other configuring scripts manually.
scripts/Configure-Makefile
scripts/Configure-os.h
scripts/Configure-os.c
scripts/Configure-config.h
# End of Configure
Index: Configure-Makefile
====================================================================
#! /bin/sh
# $Cambridge: exim/exim-src/scripts/Configure-Makefile,v 1.1 2004/10/06 15:07:40 ph10 Exp $
# Shell script to build Makefile in a build directory. It must be called
# from inside the directory. It does its own checking of when to rebuild; it
# just got too horrendous to get it right in "make", because of the optionally
# existing configuration files.
# First off, get the OS type, and check that there is a make file for it.
ostype=`../scripts/os-type -generic` || exit 1
if [ ! -r ../OS/Makefile-$ostype ] ; then
echo ""
echo "*** Sorry - operating system $ostype is not supported"
echo "*** See OS/Makefile-* for supported systems" 1>&2
echo ""
exit 1
fi
# We also need the architecture type, in order to test for any architecture-
# specific configuration files.
archtype=`../scripts/arch-type` || exit 1
# Now test for either the non-existence of Makefile, or for any of its
# components being newer. Note that the "newer" script gives the right
# answer (for our purposes) when the first file is non-existent.
editme=../Local/Makefile
rebuild=yes
if [ -f Makefile ] ; then
rebuild=no
if ../scripts/newer $editme Makefile || \
../scripts/newer $editme-$ostype Makefile || \
../scripts/newer $editme-$archtype Makefile || \
../scripts/newer $editme-$ostype-$archtype Makefile || \
../scripts/newer ../scripts/Configure-Makefile Makefile || \
../scripts/newer ../OS/Makefile-Base Makefile || \
../scripts/newer ../OS/Makefile-Default Makefile
then
rebuild=yes
fi
fi
# If the "build" variable is set it means that a build name was explicitly
# given. Arrange to pick up a build-specific configuration file.
if [ "X$build" != "X" ] ; then
mfb=Local/Makefile-$build
if ../scripts/newer $editme-$build Makefile ; then
rebuild=yes
fi
else
mfb=
fi
# If Makefile is up-to-date, no need to rebuild it.
if [ $rebuild = no ] ; then
echo "\`Makefile' is up to date."
echo " "
exit
fi
# Makefile needs to be rebuilt in the current directory by joining
# the generic default makefile, the OS base makefile, and then local
# generic, OS-specific, architecture-specific, and OS+architecture-specific
# makefiles, if they exist. These files all contain macro definitions, with
# later definitions overriding earlier ones. Make a temporary file first, in
# case things go wrong. A second temporary is needed for sorting out the
# default Perl stuff. Use short macro names to save typing.
mf=Makefile
mft=$mf-t
mftt=$mf-tt
# Ensure the temporary does not exist and start the new one by setting
# the OSTYPE and ARCHTYPE variables.
rm -f $mft $mftt
(echo "OSTYPE=$ostype"; echo "ARCHTYPE=$archtype"; echo "") > $mft || exit 1
# Now concatenate the files to the temporary file. Copy the files using sed to
# remove comments, blank lines, and trailing white space.
# BEWARE: a tab character is needed in the sed command below. It has had
# a nasty tendency to get lost in the past, causing a problem if a tab has
# actually been present in one of the files. Use a variable to hold a space
# and a tab to keep the tab in one place.
st=' '
for f in OS/Makefile-Default \
OS/Makefile-$ostype \
Local/Makefile \
Local/Makefile-$ostype \
Local/Makefile-$archtype \
Local/Makefile-$ostype-$archtype \
$mfb
do if test -r ../$f
then echo "# From $f"
sed "/^#/d;/^[$st]*\$/d;s/[$st]*\$//" ../$f || exit 1
echo "# End of $f"
echo ""
fi
done >> $mft || exit 1
# See if there is a definition of EXIM_PERL in what we have built so far.
# If so, run Perl to find the default values for PERL_CC, PERL_CCOPTS,
# and PERL_LIBS. These need to be put at the top of the Makefile, so we rename
# what we have so far and then copy it afterwards. Use the value of PERL_COMMAND
# if it has been defined.
EXIM_PERL=`grep EXIM_PERL $mft`
PERL_COMMAND=`grep PERL_COMMAND $mft | sed -e "\\$!d;s/^[$st]*PERL_COMMAND[$st]*=[$st]*//"`
if [ "${PERL_COMMAND}" = "" ] ; then
PERL_COMMAND='perl'
fi
if [ "${EXIM_PERL}" != "" ] ; then
testperl=`$PERL_COMMAND --version`
if [ "$testperl" = "" ] ; then
echo "*** EXIM_PERL is set, but '$PERL_COMMAND --version' failed"
exit 1
fi
mv $mft $mftt
echo "PERL_CC=`$PERL_COMMAND -MConfig -e 'print $Config{cc}'`" >>$mft
echo "PERL_CCOPTS=`$PERL_COMMAND -MExtUtils::Embed -e ccopts`" >>$mft
echo "PERL_LIBS=`$PERL_COMMAND -MExtUtils::Embed -e ldopts`" >>$mft
echo "" >>$mft
cat $mftt >> $mft
rm -f $mftt
fi
# Record the build variable in the Makefile.
echo "build=$build" >>$mft
echo "" >>$mft
# Finally, join on the generic base make file, which contains the actual
# rules and stuff.
cat ../OS/Makefile-Base >> $mft || exit 1
# If the new makefile is the same as the existing one, say so, and just
# update the timestamp. Otherwise remove the old and install the new.
if [ -s $mf ] && cmp -s $mft $mf
then echo ">>> rebuilt $mf unchanged"
echo " "
touch $mf || exit
rm -f $mft
elif rm -f $mf
mv $mft $mf
then echo ">>> New $mf installed"
echo '>>> Use "make makefile" if you need to force rebuilding of the makefile'
echo " "
else echo " "
echo "*** Failed to install $mf - see $mft"
echo " "
exit 1;
fi
# End of Configure-Makefile
Index: Configure-config.h
====================================================================
#! /bin/sh
# $Cambridge: exim/exim-src/scripts/Configure-config.h,v 1.1 2004/10/06 15:07:40 ph10 Exp $
# Build the config.h file, using the buildconfig program, first ensuring that
# it exists.
# 22-May-1996: remove the use of the "-a" flag for /bin/sh because it is not
# implemented in the FreeBSD shell. Sigh.
# 12-Mar-1997: add s/#.*$// to the sed script to allow for comments on the
# ends of settings - someone got caught.
# 18-Apr-1997: put the tab character into a variable to stop it getting
# lost by accident (which has happened a couple of times).
# 19-Jan-1998: indented settings in the makefile weren't being handled
# correctly; added [$st]* before \\([A-Z] in the pattern, to ignore leading
# space. Oddly, the pattern previously read ^\([A-Z which didn't seem to
# cause a problem (but did when the new bit was put in).
make buildconfig || exit 1
# BEWARE: tab characters needed in the following sed command. They have had
# a nasty tendency to get lost in the past, causing a problem if a tab has
# actually been present in makefile. Use a variable to hold a space and a
# tab to keep the tab in one place. This makes the sed option horrendous to
# read, but the whole script is safer.
st=' '
(sed -n \
"/\\\$/d;s/#.*\$//;s/^[$st]*\\([A-Z][^:$st]*\\)[$st]*=[$st]*\\([^$st]*\\)[$st]*\$/\\1=\\2 export \\1/p" \
< Makefile ; echo "./buildconfig") | /bin/sh
# If buildconfig ends with an error code, it will have output an error
# message. Ensure that a broken config.h gets deleted.
if [ $? != 0 ] ; then
rm -f config.h
exit 1
fi
# Double-check that config.h is complete.
if [ "`tail -1 config.h`" != "/* End of config.h */" ] ; then
echo "*** config.h appears to be incomplete"
echo "*** unexpected failure in buildconfig program"
exit 1
fi
echo ">>> config.h built"
echo ""
# End of Configure-config.h
Index: Configure-eximon
====================================================================
#! /bin/sh
# $Cambridge: exim/exim-src/scripts/Configure-eximon,v 1.1 2004/10/06 15:07:40 ph10 Exp $
# Shell script to build the configurable part of the Exim monitor's start-up
# script. This is built from various configuration files. The final part is
# added in the Makefile, using various macros that are available at that stage.
scripts=../scripts
# First off, get the OS type, and check that there is a make file for it.
os=`$scripts/os-type -generic` || exit 1
if test ! -r ../OS/Makefile-$os
then echo ""
echo "*** Sorry - operating system $os is not supported"
echo "*** See OS/Makefile-* for supported systems" 1>&2
echo ""
exit 1;
fi
# We also need the architecture type, in order to test for any architecture-
# specific configuration files.
arch=`$scripts/arch-type` || exit 1
# Build a file called eximon in the current directory by joining
# the generic default configure file, the OS base configure file, and then
# local generic, OS-specific, architecture-specific, and OS+architecture-
# specific configurationfiles, if they exist. These files all contain variable
# definitions, with later definitions overriding earlier ones.
echo "#!/bin/sh" > eximon
chmod a+x eximon
# Concatenate the configuration files that exist
for f in OS/eximon.conf-Default \
OS/eximon.conf-$os \
Local/eximon.conf \
Local/eximon.conf-$os \
Local/eximon.conf-$arch \
Local/eximon.conf-$os-$arch
do if test -r ../$f
then echo "# From $f"
sed '/^#/d;/^[ ]*$/d' ../$f || exit 1
echo "# End of $f"
echo ""
fi
done >> eximon || exit 1
# End of Configure-eximon
Index: Configure-os.c
====================================================================
#! /bin/sh
# $Cambridge: exim/exim-src/scripts/Configure-os.c,v 1.1 2004/10/06 15:07:40 ph10 Exp $
# Shell script to build os.c. There doesn't have to be an OS-specific os.c
# file, but if there is, it gets copied at the start of os.c. The basic src
# copy of os.c contains generic functions, controlled in some cases by
# macro switches so that where they are common to a number of OS, they can
# just be switched in.
scripts=../scripts
# First off, get the OS type, and check that there is a make file for it.
os=`$scripts/os-type -generic` || exit 1
if test ! -r ../OS/Makefile-$os
then echo ""
echo "*** Sorry - operating system $os is not supported"
echo "*** See OS/Makefile-* for supported systems" 1>&2
echo ""
exit 1;
fi
# Now build the file
rm -f os.c
echo '#include "exim.h"' > os.c || exit 1
test -r ../OS/os.c-$os && cat ../OS/os.c-$os >> os.c
echo '#include "../src/os.c"' >> os.c || exit 1
# End of Configure-os.c
Index: Configure-os.h
====================================================================
#! /bin/sh
# $Cambridge: exim/exim-src/scripts/Configure-os.h,v 1.1 2004/10/06 15:07:40 ph10 Exp $
# Shell script to create a link to the appropriate OS-specific header file.
scripts=../scripts
# Get the OS type, and check that there is a make file for it.
os=`$scripts/os-type -generic` || exit 1
if test ! -r ../OS/Makefile-$os
then echo ""
echo "*** Sorry - operating system $os is not supported"
echo "*** See OS/Makefile-* for supported systems" 1>&2
echo ""
exit 1;
fi
# Ensure there is an OS-specific header file, and link it to os.h. There should
# always be one if there is a make file for the OS, so its absence is somewhat
# disastrous.
if test ! -r ../OS/os.h-$os
then echo ""
echo "*** Build error: OS/os.h-$os file is missing"
echo ""
exit 1;
fi
rm -f os.h
ln -s ../OS/os.h-$os os.h || exit 1
# Special-purpose fudge for older versions of Linux (pre 2.1.15) that
# use the structure name "options" instead of "ip_options".
if [ "$os" != "Linux" -a "$os" != "Linux-libc5" ] ; then exit 0; fi
grep ip_options /usr/include/linux/ip.h >/dev/null
if [ $? = 0 ] ; then exit 0; fi
cat >>os.h <<End
/* Fudge added because this Linux doesn't appear to have a definition
for ip_options in /usr/include/linux/ip.h. */
#define ip_options options
End
# End of Configure-os.h
Index: MakeLinks
====================================================================
#!/bin/sh
# $Cambridge: exim/exim-src/scripts/MakeLinks,v 1.1 2004/10/06 15:07:40 ph10 Exp $
# Script to build links for all the exim source files from the system-
# specific build directory. It should be run from within that directory.
test ! -d ../src && \
echo "*** $0 should be run in a system-specific subdirectory." && \
exit 1
test -r version.c && \
echo "*** It appears that $0 has already been run." && \
exit 1
if [ -r pcre/Makefile ] ; then
echo "*** It appears that $0 was previously interrupted."
echo "*** You need to remove the build directory, and then run 'make' again."
exit 1
fi
# Initialize the file holding the compile number
echo "0" > cnumber.h
echo ""
echo ">>> Creating links to source files..."
# The PCRE regular expression library sources have to be linked
# independently in their own sub-directory, since their .o files
# are built using their own Makefile in the sub-directory.
mkdir pcre
cd pcre
ln -s ../../src/pcre/Makefile Makefile
ln -s ../../src/pcre/config.h config.h
ln -s ../../src/pcre/dftables.c dftables.c
ln -s ../../src/pcre/internal.h internal.h
ln -s ../../src/pcre/pcre.h pcre.h
ln -s ../../src/pcre/maketables.c maketables.c
ln -s ../../src/pcre/get.c get.c
ln -s ../../src/pcre/pcre.c pcre.c
ln -s ../../src/pcre/pcretest.c pcretest.c
ln -s ../../src/pcre/printint.c printint.c
ln -s ../../src/pcre/study.c study.c
cd ..
# Likewise for the lookups
mkdir lookups
cd lookups
ln -s ../../src/lookups/README README
ln -s ../../src/lookups/Makefile Makefile
ln -s ../../src/lookups/cdb.h cdb.h
ln -s ../../src/lookups/cdb.c cdb.c
ln -s ../../src/lookups/dbmdb.h dbmdb.h
ln -s ../../src/lookups/dbmdb.c dbmdb.c
ln -s ../../src/lookups/dnsdb.h dnsdb.h
ln -s ../../src/lookups/dnsdb.c dnsdb.c
ln -s ../../src/lookups/dsearch.h dsearch.h
ln -s ../../src/lookups/dsearch.c dsearch.c
ln -s ../../src/lookups/ibase.h ibase.h
ln -s ../../src/lookups/ibase.c ibase.c
ln -s ../../src/lookups/ldap.h ldap.h
ln -s ../../src/lookups/ldap.c ldap.c
ln -s ../../src/lookups/lsearch.h lsearch.h
ln -s ../../src/lookups/lsearch.c lsearch.c
ln -s ../../src/lookups/mysql.h mysql.h
ln -s ../../src/lookups/mysql.c mysql.c
ln -s ../../src/lookups/nis.h nis.h
ln -s ../../src/lookups/nis.c nis.c
ln -s ../../src/lookups/nisplus.h nisplus.h
ln -s ../../src/lookups/nisplus.c nisplus.c
ln -s ../../src/lookups/oracle.h oracle.h
ln -s ../../src/lookups/oracle.c oracle.c
ln -s ../../src/lookups/passwd.h passwd.h
ln -s ../../src/lookups/passwd.c passwd.c
ln -s ../../src/lookups/pgsql.h pgsql.h
ln -s ../../src/lookups/pgsql.c pgsql.c
ln -s ../../src/lookups/testdb.h testdb.h
ln -s ../../src/lookups/testdb.c testdb.c
ln -s ../../src/lookups/whoson.h whoson.h
ln -s ../../src/lookups/whoson.c whoson.c
ln -s ../../src/lookups/lf_functions.h lf_functions.h
ln -s ../../src/lookups/lf_check_file.c lf_check_file.c
ln -s ../../src/lookups/lf_quote.c lf_quote.c
cd ..
# Likewise for the code for the routers
mkdir routers
cd routers
ln -s ../../src/routers/README README
ln -s ../../src/routers/Makefile Makefile
ln -s ../../src/routers/accept.h accept.h
ln -s ../../src/routers/accept.c accept.c
ln -s ../../src/routers/dnslookup.h dnslookup.h
ln -s ../../src/routers/dnslookup.c dnslookup.c
ln -s ../../src/routers/ipliteral.h ipliteral.h
ln -s ../../src/routers/ipliteral.c ipliteral.c
ln -s ../../src/routers/iplookup.h iplookup.h
ln -s ../../src/routers/iplookup.c iplookup.c
ln -s ../../src/routers/manualroute.h manualroute.h
ln -s ../../src/routers/manualroute.c manualroute.c
ln -s ../../src/routers/queryprogram.h queryprogram.h
ln -s ../../src/routers/queryprogram.c queryprogram.c
ln -s ../../src/routers/redirect.h redirect.h
ln -s ../../src/routers/redirect.c redirect.c
ln -s ../../src/routers/rf_functions.h rf_functions.h
ln -s ../../src/routers/rf_change_domain.c rf_change_domain.c
ln -s ../../src/routers/rf_expand_data.c rf_expand_data.c
ln -s ../../src/routers/rf_get_errors_address.c rf_get_errors_address.c
ln -s ../../src/routers/rf_get_munge_headers.c rf_get_munge_headers.c
ln -s ../../src/routers/rf_get_transport.c rf_get_transport.c
ln -s ../../src/routers/rf_get_ugid.c rf_get_ugid.c
ln -s ../../src/routers/rf_queue_add.c rf_queue_add.c
ln -s ../../src/routers/rf_lookup_hostlist.c rf_lookup_hostlist.c
ln -s ../../src/routers/rf_self_action.c rf_self_action.c
ln -s ../../src/routers/rf_set_ugid.c rf_set_ugid.c
cd ..
# Likewise for the code for the transports
mkdir transports
cd transports
ln -s ../../src/transports/README README
ln -s ../../src/transports/Makefile Makefile
ln -s ../../src/transports/appendfile.h appendfile.h
ln -s ../../src/transports/appendfile.c appendfile.c
ln -s ../../src/transports/autoreply.h autoreply.h
ln -s ../../src/transports/autoreply.c autoreply.c
ln -s ../../src/transports/lmtp.h lmtp.h
ln -s ../../src/transports/lmtp.c lmtp.c
ln -s ../../src/transports/pipe.h pipe.h
ln -s ../../src/transports/pipe.c pipe.c
ln -s ../../src/transports/smtp.h smtp.h
ln -s ../../src/transports/smtp.c smtp.c
ln -s ../../src/transports/tf_maildir.c tf_maildir.c
ln -s ../../src/transports/tf_maildir.h tf_maildir.h
cd ..
# Likewise for the code for the authorization functions
mkdir auths
cd auths
ln -s ../../src/auths/README README
ln -s ../../src/auths/Makefile Makefile
ln -s ../../src/auths/b64encode.c b64encode.c
ln -s ../../src/auths/b64decode.c b64decode.c
ln -s ../../src/auths/call_pam.c call_pam.c
ln -s ../../src/auths/call_pwcheck.c call_pwcheck.c
ln -s ../../src/auths/call_radius.c call_radius.c
ln -s ../../src/auths/cyrus_sasl.c cyrus_sasl.c
ln -s ../../src/auths/cyrus_sasl.h cyrus_sasl.h
ln -s ../../src/auths/get_data.c get_data.c
ln -s ../../src/auths/get_no64_data.c get_no64_data.c
ln -s ../../src/auths/md5.c md5.c
ln -s ../../src/auths/xtextencode.c xtextencode.c
ln -s ../../src/auths/xtextdecode.c xtextdecode.c
ln -s ../../src/auths/cram_md5.c cram_md5.c
ln -s ../../src/auths/cram_md5.h cram_md5.h
ln -s ../../src/auths/plaintext.c plaintext.c
ln -s ../../src/auths/plaintext.h plaintext.h
ln -s ../../src/auths/pwcheck.c pwcheck.c
ln -s ../../src/auths/pwcheck.h pwcheck.h
ln -s ../../src/auths/auth-spa.c auth-spa.c
ln -s ../../src/auths/auth-spa.h auth-spa.h
ln -s ../../src/auths/sha1.c sha1.c
ln -s ../../src/auths/spa.c spa.c
ln -s ../../src/auths/spa.h spa.h
cd ..
# The basic source files for Exim and utilities. NB local_scan.h gets linked,
# but local_scan.c does not, because its location is taken from the build-time
# configuration. Likewise for the os.c file, which gets build dynamically.
ln -s ../src/dbfunctions.h dbfunctions.h
ln -s ../src/dbstuff.h dbstuff.h
ln -s ../src/exim.h exim.h
ln -s ../src/functions.h functions.h
ln -s ../src/globals.h globals.h
ln -s ../src/local_scan.h local_scan.h
ln -s ../src/macros.h macros.h
ln -s ../src/mytypes.h mytypes.h
ln -s ../src/osfunctions.h osfunctions.h
ln -s ../src/store.h store.h
ln -s ../src/structs.h structs.h
ln -s ../src/acl.c acl.c
ln -s ../src/buildconfig.c buildconfig.c
ln -s ../src/child.c child.c
ln -s ../src/crypt16.c crypt16.c
ln -s ../src/daemon.c daemon.c
ln -s ../src/dbfn.c dbfn.c
ln -s ../src/debug.c debug.c
ln -s ../src/deliver.c deliver.c
ln -s ../src/directory.c directory.c
ln -s ../src/dns.c dns.c
ln -s ../src/drtables.c drtables.c
ln -s ../src/dummies.c dummies.c
ln -s ../src/enq.c enq.c
ln -s ../src/exim.c exim.c
ln -s ../src/exim_dbmbuild.c exim_dbmbuild.c
ln -s ../src/exim_dbutil.c exim_dbutil.c
ln -s ../src/exim_lock.c exim_lock.c
ln -s ../src/expand.c expand.c
ln -s ../src/filter.c filter.c
ln -s ../src/filtertest.c filtertest.c
ln -s ../src/globals.c globals.c
ln -s ../src/header.c header.c
ln -s ../src/host.c host.c
ln -s ../src/ip.c ip.c
ln -s ../src/log.c log.c
ln -s ../src/lss.c lss.c
ln -s ../src/match.c match.c
ln -s ../src/moan.c moan.c
ln -s ../src/parse.c parse.c
ln -s ../src/perl.c perl.c
ln -s ../src/queue.c queue.c
ln -s ../src/rda.c rda.c
ln -s ../src/readconf.c readconf.c
ln -s ../src/receive.c receive.c
ln -s ../src/retry.c retry.c
ln -s ../src/rewrite.c rewrite.c
ln -s ../src/rfc2047.c rfc2047.c
ln -s ../src/route.c route.c
ln -s ../src/search.c search.c
ln -s ../src/sieve.c sieve.c
ln -s ../src/smtp_in.c smtp_in.c
ln -s ../src/smtp_out.c smtp_out.c
ln -s ../src/spool_in.c spool_in.c
ln -s ../src/spool_out.c spool_out.c
ln -s ../src/store.c store.c
ln -s ../src/string.c string.c
ln -s ../src/tls.c tls.c
ln -s ../src/tls-gnu.c tls-gnu.c
ln -s ../src/tls-openssl.c tls-openssl.c
ln -s ../src/tod.c tod.c
ln -s ../src/transport.c transport.c
ln -s ../src/tree.c tree.c
ln -s ../src/verify.c verify.c
ln -s ../src/version.c version.c
# End of MakeLinks
Index: arch-type
====================================================================
#! /bin/sh
# $Cambridge: exim/exim-src/scripts/arch-type,v 1.1 2004/10/06 15:07:40 ph10 Exp $
# Shell script to determine the architecture type.
# If EXIM_ARCHTYPE is set, use it. This allows a manual override.
case "$EXIM_ARCHTYPE" in ?*) arch="$EXIM_ARCHTYPE";; esac
# Otherwise, try to get a value from the uname command. When uname -p gives
# "unknown" or something containing spaces, try -m.
case "$arch" in '') arch=`uname -p 2> /dev/null`;; esac
case "$arch" in ''|unknown|*\ *) arch=`uname -m 2> /dev/null`;; esac
# Otherwise, see if ARCHTYPE is set. Some versions of NetBSD set it to
# "NetBSD", which isn't very helpful. However, we expect uname to have
# worked under NetBSD, so this shouldn't matter.
case "$arch" in '') arch="$ARCHTYPE";; esac
# Otherwise, as a cheap test, try shell's HOSTTYPE, but as tcsh sometimes sets
# it to the OS name, ignore it if running with tcsh.
case "$SHELL" in ?*tcsh) HOSTTYPE="";; esac
case "$arch++$HOSTTYPE" in
++?*) arch="$HOSTTYPE"
# Fix up disagreements :-)
case "$arch" in
sun4*) arch=sparc;;
# Comment by Vadim Vygonets:
# Maybe sun4/sun4c/sun4m and sun4u (or whatever else they call the
# Ultras, sparc64?) should be different platforms. Maybe not.
# NetBSD and OpenBSD (the latter is not supported) think about them
# as different platforms. Solaris doesn't seem to. I have no idea
# about Linux.
sgi) arch=mips;;
MIPSEL) arch=mips;;
esac
;;
esac
# Give up if failed.
case "$arch" in
'') echo "" 1>&2
echo "*** Failed to determine the machine architecture type." 1>&2
echo "" 1>&2
echo UnKnown
exit 1;;
esac
# Get rid of any gash characters in the string
arch=`echo $arch | sed 's,[^-+_.a-zA-Z0-9],,g'`
# Some further fixups needed
case "$arch" in
i[3456]86*) arch=i386;;
RISC) arch=mips;; # MIPS Ultrix
IP22) arch=mips;;
9000[78][0-9][0-9]) arch=hp9000s700;;
9000[34][0-9][0-9]) arch=hp9000s400;;
3050R) arch=3050;;
esac
# OK, the script seems to have worked. Pass the value back.
echo "$arch"
# End of arch-type
Index: exim_install
====================================================================
#! /bin/sh
# $Cambridge: exim/exim-src/scripts/exim_install,v 1.1 2004/10/06 15:07:40 ph10 Exp $
# Script to install Exim binaries in BIN_DIRECTORY, which is defined in
# the local Makefile. It expects to be run in a build directory. It needs
# to be run as root in order to make exim setuid to root. If exim runs setuid
# to (e.g.) exim, this script should be run as that user or root.
# This script also installs a default configuration file in CONFIGURE_FILE
# if there is no configuration file there, but only if CONFIGURE_FILE specifies
# single file. If it specifies a list, no action is taken.
# If a default configuration file is installed, the existence of the system
# aliases file is tested. A default, containing only comments, is installed if
# necessary.
# If INFO_DIRECTORY is defined in any of the local Makefiles, and the Exim doc
# directory contains the Texinfo documentation, this script also installs a
# the info files in INFO_DIRECTORY.
# If DESTDIR is defined, all file paths are prefixed with ${DESTDIR}, with the
# sole exception of the reference to the system aliases file in the default
# configuration, because it is assumed that Exim is not actually going to be
# run from this position. For backward compatibility, if DESTDIR is not
# defined, ROOT is used instead.
# The script can be made to output what it would do, without actually doing
# anything, by giving it the option "-n" (cf make). Arguments are the names
# of things to install. No arguments installs everything.
do_chown=yes
do_symlink=yes
while [ $# -gt 0 ] ; do
case "$1" in
-n)
real="true || "
ver="verification "
com=": "
echo $com ""
echo $com "*** Verification mode only: no commands will actually be obeyed"
echo $com "*** You can cut and paste the bits you want to a shell, etc"
echo $com ""
echo cd `pwd`
;;
-no_chown)
do_chown=no
;;
-no_symlink)
do_symlink=no
;;
*)
break
;;
esac
shift
done
# Get the values of BIN_DIRECTORY, CONFIGURE_FILE, INFO_DIRECTORY, NO_SYMLINK,
# SYSTEM_ALIASES_FILE, and EXE from the global Makefile (in the build
# directory). EXE is empty except in the Cygwin environment. In each case, keep
# the latest definition, thus respecting the Makefiles precedence. The sed
# sequences here are messy, but have to be very "basic" in order to work on
# Solaris, where the regular expressions in sed are primitive indeed. Modify at
# your peril.
BIN_DIRECTORY=`sed -n -e '/^ *BIN_DIRECTORY *=/{s/^[^=]*= *//; s/ \{1,\}#.*//;s/ *$//;h;}' -e '${g;p;}' Makefile`
CONFIGURE_FILE=`sed -n -e '/^ *CONFIGURE_FILE *=/{s/^[^=]*= *//; s/ \{1,\}#.*//;s/ *$//;h;}' -e '${g;p;}' Makefile`
INFO_DIRECTORY=`sed -n -e '/^ *INFO_DIRECTORY *=/{s/^[^=]*= *//; s/ \{1,\}#.*//;s/ *$//;h;}' -e '${g;p;}' Makefile`
NO_SYMLINK=`sed -n -e '/^ *NO_SYMLINK *=/{s/^[^=]*= *//; s/ \{1,\}#.*//;s/ *$//;h;}' -e '${g;p;}' Makefile`
SYSTEM_ALIASES_FILE=`sed -n -e '/^ *SYSTEM_ALIASES_FILE *=/{s/^[^=]*= *//; s/ \{1,\}#.*//;s/ *$//;h;}' -e '${g;p;}' Makefile`
EXE=`sed -n -e '/^ *EXE *=/{s/^[^=]*= *//; s/ \{1,\}#.*//;s/ *$//;h;}' -e '${g;p;}' Makefile`
# Set a default for SYSTEM_ALIASES_FILE
if [ "${SYSTEM_ALIASES_FILE}" = "" ] ; then
SYSTEM_ALIASES_FILE=/etc/aliases
fi
# Allow INST_xx to over-ride xx
case "$INST_BIN_DIRECTORY" in ?*) BIN_DIRECTORY="$INST_BIN_DIRECTORY";; esac
case "$INST_CONFIGURE_FILE" in ?*) CONFIGURE_FILE="$INST_CONFIGURE_FILE";; esac
case "$INST_INFO_DIRECTORY" in ?*) INFO_DIRECTORY="$INST_INFO_DIRECTORY";; esac
case "$INST_SYSTEM_ALIASES_FILE" in ?*) SYSTEM_ALIASES_FILE="$INST_SYSTEM_ALIASES_FILE";; esac
case "$INST_UID" in '') INST_UID=root;; *) INST_UID="$INST_UID";; esac
case "$INST_CP" in '') CP=cp;; *) CP="$INST_CP";; esac
case "$INST_MV" in '') MV=mv;; *) MV="$INST_MV";; esac
case "$INST_LN" in '') LN=ln;; *) LN="$INST_LN";; esac
case "$INST_CHOWN" in '') CHOWN=chown;; *) CHOWN="$INST_CHOWN";; esac
case "$INST_CHMOD" in '') CHMOD=chmod;; *) CHMOD="$INST_CHMOD";; esac
case "$INST_DIRNAME" in '') DIRNAME=dirname;; *) DIRNAME="$INST_DIRNAME";; esac
case "$INST_MKDIR" in '') MKDIR=mkdir;; *) MKDIR="$INST_MKDIR";; esac
# Allow the user to over-ride xx
case "$inst_dest" in ?*) BIN_DIRECTORY="$inst_dest";; esac
case "$inst_conf" in ?*) CONFIGURE_FILE="$inst_conf";; esac
case "$inst_info" in ?*) INFO_DIRECTORY="$inst_info";; esac
case "$inst_aliases" in ?*) SYSTEM_ALIASES_FILE="$inst_aliases";; esac
# Insert ${DESTDIR} at the start of all paths so that the whole thing can be
# installed under a different file root. For backwards compatibility, use
# ${ROOT} if ${DESTDIR} is not set. However, we need to save the value of
# the real system aliases file, and use that in the default configuration.
ACTUAL_SYSTEM_ALIASES_FILE=${SYSTEM_ALIASES_FILE}
DESTDIR=${DESTDIR:-${ROOT}}
BIN_DIRECTORY=${DESTDIR}${BIN_DIRECTORY}
CONFIGURE_FILE=${DESTDIR}${CONFIGURE_FILE}
SYSTEM_ALIASES_FILE=${DESTDIR}${SYSTEM_ALIASES_FILE}
if [ "${INFO_DIRECTORY}" != "" ] ; then
INFO_DIRECTORY=${DESTDIR}${INFO_DIRECTORY}
fi
# Overrides of other things
case "$inst_uid" in ?*) INST_UID="$inst_uid";; esac
case "$inst_cp" in ?*) CP="$inst_cp";; esac
case "$inst_mv" in ?*) MV="$inst_mv";; esac
case "$inst_ln" in ?*) LN="$inst_ln";; esac
case "$inst_chown" in ?*) CHOWN="$inst_chown";; esac
case "$inst_chmod" in ?*) CHMOD="$inst_chmod";; esac
case "$inst_dirname" in ?*) DIRNAME="$inst_dirname";; esac
case "$inst_mkdir" in ?*) MKDIR="$inst_mkdir";; esac
# chown is a special case; in at least one OS it is in /usr/etc instead
# of in /usr/bin, and therefore not likely to be on the path. Another OS
# has it in /usr/sbin. This fudge tries to cope with these variations.
# Otherwise, and for other commands, we assume that the normal PATH will
# give access to where they are on your operating system (normally /usr/bin
# or /bin).
if [ "${CHOWN}" = "chown" -a -x /usr/sbin/chown ] ; then
CHOWN=/usr/sbin/chown
fi
if [ "${CHOWN}" = "chown" -a ! -f /usr/bin/chown -a -f /usr/etc/chown ] ; then
CHOWN=/usr/etc/chown
fi
# See if the exim monitor has been built
if [ -f eximon -a -f eximon.bin ]; then
exim_monitor="eximon eximon.bin"
fi
# If bin directory doesn't exist, try to create it
if [ ! -d "${BIN_DIRECTORY}" ]; then
echo mkdir -p ${BIN_DIRECTORY}
${real} mkdir -p ${BIN_DIRECTORY}
if [ $? -ne 0 ]; then
echo $com ""
echo $com "*** Exim installation ${ver}failed ***"
exit 1
else
${real} echo $com ${BIN_DIRECTORY} created
fi
fi
# If no arguments, install everything
if [ $# -gt 0 ]; then
set $@
else
set exim${EXE} ${exim_monitor} exim_dumpdb${EXE} exim_fixdb${EXE} \
exim_tidydb${EXE} exinext exiwhat exim_dbmbuild${EXE} exicyclog \
exigrep eximstats exipick exiqgrep exiqsumm exim_lock${EXE} \
exim_checkaccess
fi
echo $com ""
echo $com Installation directory is ${BIN_DIRECTORY}
echo $com ""
while [ $# -gt 0 ]; do
name=$1
shift
if [ ! -s ${name} ]; then
echo $com ""
echo $com "*** `pwd`/${name} does not exist or is empty"
echo $com "*** Have you built Exim successfully?"
echo $com "*** Exim installation ${ver}failed ***"
exit 1
fi
# The exim binary is handled specially
if [ $name = exim${EXE} ]; then
version=exim-`./exim -bV -C /dev/null | \
awk '/Exim version/ { OFS=""; print $3,"-",substr($4,2,length($4)-1) }'`${EXE}
if [ "${version}" = "exim-${EXE}" ]; then
echo $com ""
echo $com "*** Could not run ./exim to find version number ***"
echo $com "*** Exim installation ${ver}failed ***"
exit 1
fi
# Do something only if newer than existing file, or no existing file
if ../scripts/newer ${name} ${BIN_DIRECTORY}/${version}; then
echo ${CP} ${name} ${BIN_DIRECTORY}/${version}
${real} ${CP} ${name} ${BIN_DIRECTORY}/${version}
if [ $? -ne 0 ]; then
echo $com ""
echo $com "*** Exim installation ${ver}failed ***"
exit 1
fi
# After copy, set ownership and permissions, unless disabled
if [ "$do_chown" != "no" ]; then
echo ${CHOWN} ${INST_UID} ${BIN_DIRECTORY}/${version}
${real} ${CHOWN} ${INST_UID} ${BIN_DIRECTORY}/${version}
if [ $? -ne 0 ]; then
echo $com ""
echo $com "*** You must be ${INST_UID} to install exim ***"
exit 1
fi
echo ${CHMOD} a+x ${BIN_DIRECTORY}/${version}
${real} ${CHMOD} a+x ${BIN_DIRECTORY}/${version}
if [ $? -ne 0 ]; then
echo $com ""
echo $com "*** Exim installation ${ver}failed ***"
exit 1
fi
echo ${CHMOD} u+s ${BIN_DIRECTORY}/${version}
${real} ${CHMOD} u+s ${BIN_DIRECTORY}/${version}
if [ $? -ne 0 ]; then
echo $com ""
echo $com "*** Exim installation ${ver}failed ***"
exit 1
fi
else
echo $com "$CHOWN $INST_UID omitted: -no_chown was specified"
echo $com "$CHMOD u+s omitted: -no_chown was specified"
fi
# Now sort out the "exim" alias, unless NO_SYMLINK is set.
if [ "X$NO_SYMLINK" = "X" ] && [ "$do_symlink" != "no" ] ; then
# First check whether "exim" exists in the directory.
if [ -f ${BIN_DIRECTORY}/exim ]; then
# If it's not a symbolic link, make a copy with the old version number
if [ `ls -l ${BIN_DIRECTORY}/exim | cut -c1-1` != 'l' ]; then
oldversion=exim-`${BIN_DIRECTORY}/exim -bV -C /dev/null | \
awk '/Exim version/ { OFS=""; print $3,"-",substr($4,2,length($4)-1) }'`${EXE}
if [ "${version}" = "${oldversion}" ] ; then
echo $com ""
echo $com "*** Existing file called exim has the same version and compile number ***"
echo $com "*** Exim installation ${ver}failed ***"
exit 1
fi
echo ${CP} ${BIN_DIRECTORY}/exim ${BIN_DIRECTORY}/${oldversion}
${real} ${CP} ${BIN_DIRECTORY}/exim ${BIN_DIRECTORY}/${oldversion}
if [ $? -ne 0 ]; then
echo $com ""
echo $com "*** Exim installation ${ver}failed ***"
exit 1
fi
fi
# Now we can move the name "exim" to be a symbolic link to the new
# version, atomically.
echo \(cd ${BIN_DIRECTORY}\; ${LN} -s ${version} temporary_exim\)
(${real} cd ${BIN_DIRECTORY}; ${real} ${LN} -s ${version} temporary_exim)
if [ $? -ne 0 ]; then
echo $com ""
echo $com "*** Exim installation ${ver}failed ***"
exit 1
fi
echo ${MV} -f ${BIN_DIRECTORY}/temporary_exim ${BIN_DIRECTORY}/exim
${real} ${MV} -f ${BIN_DIRECTORY}/temporary_exim ${BIN_DIRECTORY}/exim
if [ $? -ne 0 ]; then
echo $com ""
echo $com "*** Exim installation ${ver}failed ***"
exit 1
fi
# If "exim" does not already exist just create a symbolic link.
else
echo \(cd ${BIN_DIRECTORY}\; ${LN} -s ${version} exim\)
(${real} cd ${BIN_DIRECTORY}; ${real} ${LN} -s ${version} exim)
if [ $? -ne 0 ]; then
echo $com ""
echo $com "*** Exim installation ${ver}failed ***"
exit 1
fi
fi
else
echo $com "creation of symlink omitted"
if [ "X$NO_SYMLINK" != "X" ] ; then
echo $com "(NO_SYMLINK is specified in Local/Makefile)"
else
echo $com "(-no_symlink was specified)"
fi
fi
# New binary is not newer than the installed file
else
echo $com ${name} is not newer than ${BIN_DIRECTORY}/${version}
fi
# Handle everything other than the exim binary itself
else
if ../scripts/newer ${name} ${BIN_DIRECTORY}/${name}; then
if [ -f ${BIN_DIRECTORY}/${name} ]; then
echo ${CP} ${BIN_DIRECTORY}/${name} ${BIN_DIRECTORY}/${name}.O
${real} ${CP} ${BIN_DIRECTORY}/${name} ${BIN_DIRECTORY}/${name}.O
if [ $? -ne 0 ]; then
echo $com ""
echo $com "*** Exim installation ${ver}failed ***"
exit 1
fi
fi
echo ${CP} ${name} ${BIN_DIRECTORY}
${real} ${CP} ${name} ${BIN_DIRECTORY}
if [ $? -ne 0 ]; then
echo $com ""
echo $com "*** Exim installation ${ver}failed ***"
exit 1
fi
else
echo $com ${name} is not newer than ${BIN_DIRECTORY}/${name}
fi
fi
done
# If there is no configuration file, install the default, modifying it to refer
# to the configured system aliases file. If there is no setting for
# SYSTEM_ALIASES_FILE, use the traditional /etc/aliases. If the file does not
# exist, install a default (dummy) for that too.
# However, if CONFIGURE_FILE specifies a list of files, skip this code.
echo $com ""
if [ `expr "${CONFIGURE_FILE}" : ".*:"` -ne 0 ] ; then
echo $com Runtime configuration is specified as the following list:
echo $com ' ' ${CONFIGURE_FILE}
echo $com Therefore, skipping automatic installation.
elif [ ! -f ${CONFIGURE_FILE} ]; then
echo $com Installing default configuration in ${CONFIGURE_FILE}
echo $com because there is no existing configuration file.
if [ "${SYSTEM_ALIASES_FILE}" = "" ] ; then
SYSTEM_ALIASES_FILE=/etc/aliases
echo $com This configuration has system aliases in ${SYSTEM_ALIASES_FILE}.
fi
echo ${MKDIR} -p `${DIRNAME} ${CONFIGURE_FILE}`
${real} ${MKDIR} -p `${DIRNAME} ${CONFIGURE_FILE}`
echo sed -e '\\'
echo " \"/SYSTEM_ALIASES_FILE/ s'SYSTEM_ALIASES_FILE'${ACTUAL_SYSTEM_ALIASES_FILE}'\"" '\\'
echo " ../src/configure.default > \${CONFIGURE_FILE}"
# I can't find a way of writing this using the ${real} feature because
# it seems that the output redirection always happens, even when -n was
# specified. So control it the hard way.
if [ "$real" = "" ] ; then
sed -e \
"/SYSTEM_ALIASES_FILE/ s'SYSTEM_ALIASES_FILE'${ACTUAL_SYSTEM_ALIASES_FILE}'" \
../src/configure.default > ${CONFIGURE_FILE}
else
true
fi
if [ $? -ne 0 ]; then
echo $com ""
echo $com "*** Exim installation ${ver}failed ***"
exit 1
fi
if [ ! -f ${SYSTEM_ALIASES_FILE} ]; then
echo $com '****'
echo $com Installing a dummy ${SYSTEM_ALIASES_FILE} file because you do not have
echo $com one, and the default configuration requires it. You should
echo $com edit ${SYSTEM_ALIASES_FILE} and at least create an alias for postmaster.
echo $com '***'
echo ${CP} ../src/aliases.default ${SYSTEM_ALIASES_FILE}
${real} ${CP} ../src/aliases.default ${SYSTEM_ALIASES_FILE}
fi
else
echo $com Configuration file ${CONFIGURE_FILE} already exists
fi
# Install info files if the directory is defined and the Texinfo
# source documentation is present.
if [ "${INFO_DIRECTORY}" != "" -a -f ../doc/spec.texinfo ] ; then
echo $com ""
if [ ! -d "${INFO_DIRECTORY}" ] ; then
echo mkdir -p ${INFO_DIRECTORY}
${real} mkdir -p ${INFO_DIRECTORY}
if [ $? -ne 0 ]; then
echo $com ""
echo $com "*** Exim installation ${ver}failed ***"
exit 1
else
echo $com ${INFO_DIRECTORY} created
fi
fi
echo $com Info installation directory is ${INFO_DIRECTORY}
echo $com ""
${real} makeinfo --no-split --output exim.info ../doc/spec.texinfo
echo ${CP} exim.info ${INFO_DIRECTORY}
${real} ${CP} exim.info ${INFO_DIRECTORY}
${real} install-info --section="Exim" \
--entry "* User guide: (exim). Exim manual" \
${INFO_DIRECTORY}/exim.info ${INFO_DIRECTORY}/dir
${real} makeinfo --no-split --output exim_filter.info ../doc/filter.texinfo
echo ${CP} exim_filter.info ${INFO_DIRECTORY}
${real} ${CP} exim_filter.info ${INFO_DIRECTORY}
${real} install-info --section="Exim" \
--entry "* Filtering: (exim_filter). Filtering mail with Exim" \
${INFO_DIRECTORY}/exim_filter.info ${INFO_DIRECTORY}/dir
fi
# Everything OK
echo $com ""
echo $com Exim installation ${ver}complete
# End of exim_install
Index: newer
====================================================================
#! /bin/sh
# $Cambridge: exim/exim-src/scripts/newer,v 1.1 2004/10/06 15:07:40 ph10 Exp $
# Script to determine whether the first file is newer than the second.
# If the first does not exist, the answer is "no";
# if the second does not exist, the answer is "yes";
# otherwise their ages are compared using "find".
if [ $# -ne 2 ]; then
echo "*** Two file names needed for 'newer' ***"
exit 2;
fi
if [ ! -f $1 ]; then exit 1; fi
if [ ! -f $2 ]; then exit 0; fi
case `find $1 -newer $2 -print` in
'') exit 1;;
*) exit 0;;
esac
# End
Index: os-type
====================================================================
#! /bin/sh
# $Cambridge: exim/exim-src/scripts/os-type,v 1.1 2004/10/06 15:07:40 ph10 Exp $
# Shell script to determine the operating system type. Some of the heuristics
# herein have accumulated over the years and may not strictly be needed now,
# but they are left in under the principle of "If it ain't broke, don't fix
# it."
# For some OS there are two variants: a full name, which is used for the
# build directory, and a generic name, which is used to identify the OS-
# specific scripts, and which can be the same for different versions of
# the OS. Solaris 2 is one such OS. The option -generic specifies the
# latter type of output.
# If EXIM_OSTYPE is set, use it. This allows a manual override.
case "$EXIM_OSTYPE" in ?*) os="$EXIM_OSTYPE";; esac
# Otherwise, try to get a value from the uname command. Use an explicit
# option just in case there are any systems where -s is not the default.
case "$os" in '') os=`uname -s`;; esac
# It is believed that all systems respond to uname -s, but just in case
# there is one that doesn't, use the shell's $OSTYPE variable. It is known
# to be unhelpful for some systems (under IRIX is it "irix" and under BSDI
# 3.0 it may be "386BSD") but those systems respond to uname -s, so this
# doesn't matter.
case "$os" in '') os="$OSTYPE";; esac
# Failed to find OS type.
case "$os" in
'') echo "" 1>&2
echo "*** Failed to determine the operating system type." 1>&2
echo "" 1>&2
echo UnKnown
exit 1;;
esac
# Clean out gash characters
os=`echo $os | sed 's,[^-+_.a-zA-Z0-9],,g'`
# A value has been obtained for the os. Some massaging may be needed in
# some cases to get a uniform set of values. In earlier versions of this
# script, $OSTYPE was looked at before uname -s, and various shells set it
# to things that are subtly different. It is possible that some of this may
# no longer be needed.
case "$os" in
aix*) os=AIX;;
AIX*) os=AIX;;
bsdi*) os=BSDI;;
BSDOS) os=BSDI;;
BSD_OS) os=BSDI;;
CYGWIN*) os=CYGWIN;;
dgux) os=DGUX;;
freebsd*) os=FreeBSD;;
gnu) os=GNU;;
Irix5) os=IRIX;;
Irix6) os=IRIX6;;
IRIX64) os=IRIX6;;
irix6.5) os=IRIX65;;
IRIX) version=`uname -r`
case "$version" in
5*) os=IRIX;;
6.5) version=`uname -R | awk '{print $NF}'`
version=`echo $version | sed 's,[^-+_a-zA-Z0-9],,g'`
os=IRIX$version;;
6*) os=IRIX632;;
esac;;
HI-OSF1-MJ) os=HI-OSF;;
HI-UXMPP) os=HI-OSF;;
hpux*) os=HP-UX;;
linux) os=Linux;;
linux-*) os=Linux;;
Linux-*) os=Linux;;
netbsd*) os=NetBSD;;
openbsd*) os=OpenBSD;;
osf1) os=OSF1;;
qnx*) os=QNX;;
solaris*) os=SunOS5;;
sunos4*) os=SunOS4;;
UnixWare) os=Unixware7;;
Ultrix) os=ULTRIX;;
ultrix*) os=ULTRIX;;
esac
# In the case of SunOS we need to distinguish between SunOS4 and Solaris (aka
# SunOS5); in the case of BSDI we need to distinguish between versions 3 and 4;
# in the case of HP-UX we need to distinguish between version 9 and later.
case "$os" in
SunOS) case `uname -r` in
5*) os="${os}5";;
4*) os="${os}4";;
esac;;
BSDI) case `uname -r` in
3*) os="${os}3";;
4.2*) os="${os}4.2";;
4*) os="${os}4";;
esac;;
HP-UX) case `uname -r` in
A.09*) os="${os}-9";;
esac;;
esac
# Need to distinguish Solaris from the version on the HAL (64bit sparc,
# CC=hcc -DV7). Also need to distinguish different versions of the OS
# for building different binaries.
case "$os" in
SunOS5) case `uname -m` in
sun4H) os="${os}-hal";;
*) os="${os}-`uname -r`";;
esac
;;
# In the case of Linux we need to distinguish which libc is used.
# This is more cautious than it needs to be. In practice libc5 will always
# be a symlink, and libc6 will always be a linker control file, but it's
# easy enough to do a better check, and check the symlink destination or the
# control file contents and make sure.
Linux) if [ -L /usr/lib/libc.so ]; then
if [ x"$(file /usr/lib/libc.so | grep "libc.so.5")"x != xx ]; then
os=Linux-libc5
fi
else
if grep -q libc.so.5 /usr/lib/libc.so; then
os=Linux-libc5
fi
fi
;;
# In the case of NetBSD we need to distinguish between a.out, ELF
# and COFF binary formats. However, a.out and COFF are the same
# for our purposes, so both of them are defined as "a.out".
# Todd Vierling of Wasabi Systems reported that NetBSD/sh3 (the
# only NetBSD port that uses COFF binary format) will switch to
# ELF soon.
NetBSD) if echo __ELF__ | ${CC-cc} -E - | grep -q __ELF__ ; then
# Non-ELF system
os="NetBSD-a.out"
fi
;;
esac
# If a generic OS name is requested, some further massaging is needed
# for some systems.
if [ "$1" = '-generic' ]; then
case "$os" in
SunOS5*) os=SunOS5;;
BSDI*) os=BSDI;;
IRIX65*) os=IRIX65;;
esac
fi
# OK, the script seems to have worked. Pass the value back.
echo "$os"
# End of os-type
