Hello again.
Below you can see the test I did (I hope I got it right).
And further below you can see my config file.
I hope this can help you to help me
Thanks in advance
// Fredrik
"mail:/usr/exim/bin admin$ sudo ./exim -bh 193.181.154.17
**** SMTP testing session as if from host 193.181.154.17
**** but without any ident (RFC 1413) callback.
**** This is not for real!
>>> host in host_lookup? yes (matched "*")
>>> looking up host name for 193.181.154.17
>>> IP address lookup yielded ns.dll.se
>>> alias mail.dll.se
>>> gethostbyname looked up these IP addresses:
>>> name=ns.dll.se address=193.181.154.17
>>> checking addresses for ns.dll.se
>>> 193.181.154.17 OK
>>> gethostbyname looked up these IP addresses:
>>> name=mail.dll.se address=193.181.154.17
>>> checking addresses for mail.dll.se
>>> 193.181.154.17 OK
>>> host in host_reject_connection? no (option unset)
>>> host in sender_unqualified_hosts? no (option unset)
>>> host in recipient_unqualified_hosts? no (option unset)
>>> host in helo_verify_hosts? no (option unset)
>>> host in helo_try_verify_hosts? no (option unset)
>>> host in helo_accept_junk_hosts? no (end of list)
220 infotech-kd.net ESMTP Exim 4.30 Sat, 29 May 2004 16:45:15 +0200
EHLO mse.dll.se
>>> host in pipelining_advertise_hosts? yes (matched "*")
>>> host in auth_advertise_hosts? yes (matched "*")
>>> host in tls_advertise_hosts? no (option unset)
250-infotech-kd.net Hello ns.dll.se [193.181.154.17]
250-SIZE 20971520
250-PIPELINING
250-AUTH CRAM-MD5 PLAIN LOGIN
250 HELP
MAIL From: Sysanne.Ruthberg@??? SIZE=51
250 OK
RCPT To: ylva.nilsson@???
>>> using ACL "acl_check_rcpt"
>>> processing "accept"
>>> check hosts = :
>>> host in ":"? no (end of list)
>>> accept: condition test failed
>>> processing "deny"
>>> check local_parts = ^.*[@%!/|]
>>> ylva.nilsson in "^.*[@%!/|]"? no (end of list)
>>> deny: condition test failed
>>> processing "drop"
>>> check hosts = net-lsearch;/usr/exim/reject-hosts.txt :
net24-lsearch;/usr/exim/reject-hosts.txt
>>> host in "net-lsearch;/usr/exim/reject-hosts.txt :
net24-lsearch;/usr/exim/reject-hosts.txt"? no (end of list)
>>> drop: condition test failed
>>> processing "drop"
>>> check condition = ${if = {${eval:$rcpt_fail_count}}{1}{yes}{no}}
>>> = no
>>> drop: condition test failed
>>> processing "drop"
>>> check !verify = recipient
>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>> routing ylva.nilsson@???
>>> ugl.se in "ugl.se"? yes (matched "ugl.se")
>>> ugl.se in "! +local_domains"? no (matched "! +local_domains")
>>> calling mysql_sys_aliases router
>>> mysql_sys_aliases router declined for ylva.nilsson@???
>>> calling mysql_aliases router
>>> routed by mysql_aliases router
>>> ----------- end verify ------------
>>> drop: condition test failed
>>> processing "accept"
>>> check local_parts = postmaster
>>> ylva.nilsson in "postmaster"? no (end of list)
>>> accept: condition test failed
>>> processing "accept"
>>> check authenticated = *
>>> accept: condition test failed
>>> processing "accept"
>>> check domains = +local_domains
>>> ugl.se in "ugl.se"? yes (matched "ugl.se")
>>> ugl.se in "+local_domains"? yes (matched "+local_domains")
>>> check verify = recipient
>>> >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
>>> routing ylva.nilsson@???
>>> ugl.se in "ugl.se"? yes (matched "ugl.se")
>>> ugl.se in "! +local_domains"? no (matched "! +local_domains")
>>> calling mysql_sys_aliases router
>>> mysql_sys_aliases router declined for ylva.nilsson@???
>>> calling mysql_aliases router
>>> routed by mysql_aliases router
>>> ----------- end verify ------------
>>> accept: condition test succeeded
250 Accepted
DATA
354 Enter message, ending with "." on a line by itself
.
>>> using ACL "acl_check_data"
>>> processing "accept"
>>> check hosts = 127.0.0.1:+relay_from_hosts
>>> gethostbyname looked up these IP addresses:
>>> name=localhost address=127.0.0.1
>>> host in "localhost : 127.0.0.1"? no (end of list)
>>> host in "127.0.0.1:+relay_from_hosts"? no (end of list)
>>> accept: condition test failed
>>> processing "accept"
>>> check authenticated = *
>>> accept: condition test failed
>>> processing "deny"
>>> check demime = scr:com:vbs:bat:lnk:pif:exe
>>> deny: condition test failed
>>> processing "deny"
>>> check demime = *
>>> check malware = *
>>> deny: condition test failed
>>> processing "deny"
>>> check regex = [Vv] *[Ii] *[Aa] *[Gg] *[Rr] *[Aa] : Prescription :
Pharmacy
>>> deny: condition test failed
>>> processing "warn"
>>> check spam = nobody:true
>>> warn: condition test succeeded
>>> processing "warn"
>>> check spam = nobody:true
>>> warn: condition test succeeded
>>> processing "warn"
>>> check spam = nobody
>>> warn: condition test failed
>>> processing "warn"
>>> check spam = nobody:true
>>> warn: condition test succeeded
>>> processing "warn"
>>> check spam = nobody
>>> warn: condition test failed
>>> processing "deny"
>>> check spam = nobody:true
>>> check condition = ${if >{$spam_score_int}{100}{1}{0}}
>>> = 0
>>> deny: condition test failed
>>> processing "accept"
>>> accept: condition test succeeded
LOG: HYHD1H-00055E-P6 <= Sysanne.Ruthberg@??? H=ns.dll.se
(mse.dll.se) [193.181.154.17] P=esmtp S=452
250 OK id=HYHD1H-00055E-P6
**** SMTP testing: that is not a real message id!
.
500 unrecognized command
QUIT"
Config:
"
######################################################################
# MAIN CONFIGURATION SETTINGS #
######################################################################
hide mysql_servers = localhost/email_db/user/pw :
localhost/exilist/user/pw
primary_hostname = infotech-kd.net
domainlist local_domains = \
${lookup mysql {SELECT domain FROM domains \
WHERE type="local" and domain="${domain}" }}
domainlist relay_to_domains = \
${lookup mysql {SELECT domain FROM domains \
WHERE type="relay" }}
hostlist relay_from_hosts = localhost : 127.0.0.1
EXILIST_HOME=/Library/WebServer/Documents/admin/exilist
EXILIST_BIN=EXILIST_HOME/exilist.mgr.pl
EXILIST_UID=www
EXILIST_GID=www
trusted_users=EXILIST_UID
never_users = root
host_lookup = *
rfc1413_hosts = *
rfc1413_query_timeout = 30s
auto_thaw = 1h
ignore_bounce_errors_after = 2h
timeout_frozen_after = 14h
message_size_limit = 20M
bounce_return_message = false
# return_size_limit = 50K
smtp_accept_queue_per_connection = 100
system_filter = /usr/exim/system_filter.exim
smtp_banner = "$primary_hostname ESMTP Exim $version_number $tod_full"
acl_smtp_rcpt = acl_check_rcpt
acl_smtp_data = acl_check_data
spamd_address = 127.0.0.1 783
av_scanner = clamd:127.0.0.1 3310
helo_allow_chars = _
helo_accept_junk_hosts = 213.180.73.234
# MAILMAN_HOME=/usr/local/mailman
# MAILMAN_WRAP=MAILMAN_HOME/mail/mailman
#
# MAILMAN_USER=mailman
# MAILMAN_GROUP=1
######################################################################
# ACL CONFIGURATION #
# Specifies access control lists for incoming SMTP mail #
######################################################################
begin acl
acl_check_rcpt:
accept hosts = :
deny local_parts = ^.*[@%!/|]
deny senders = \
${lookup mysql{SELECT sender
FROM deny_sender \
WHERE '$sender_address'
rlike sender} \
{$sender_address}}
message = Not accepted from $sender_address
drop hosts = net-lsearch;/usr/exim/reject-hosts.txt : \
net24-lsearch;/usr/exim/reject-hosts.txt
message = Connection Denied for $sender_host_address
drop message = Too many bad recipients
${eval:$rcpt_fail_count} out of $rcpt_count
condition = ${if =
{${eval:$rcpt_fail_count}}{1}{yes}{no}}
delay = 3m
drop message = Recipient unknown
!verify = recipient
delay = ${eval: ($rcpt_fail_count + 1) * 1}m
accept local_parts = postmaster
domains = +local_domains
accept authenticated = *
accept domains = +local_domains
endpass
message = unknown user
verify = recipient
accept domains = +relay_to_domains
endpass
message = unrouteable address
verify = recipient
accept hosts = +relay_from_hosts
deny message = authentication required - relay not permitted
acl_check_data:
# Any hosts and authenticated clients listed here will not be scanned
by SpamAssassin
accept hosts = 127.0.0.1:+relay_from_hosts
accept authenticated = *
# First unpack MIME containers and reject serious errors.
# deny message = This message contains a MIME error ($demime_reason)
# demime = *
# condition = ${if >{$demime_errorlevel}{2}{1}{0}}
# Reject typically wormish file extensions. There is almost no
# sense in sending such files by email.
deny message = This message contains an unwanted file extension
($found_extension)
demime = scr:com:vbs:bat:lnk:pif:exe
# # If the message contains SCR or PIF we want to Log this
# warn log_message = DISCARD: ATTACHMENT ($found_extension)
# demime = scr:com:vbs:bat:lnk:pif:exe
# control = fakereject
# discard demime = scr:com:vbs:bat:lnk:pif:exe
## Reject virus infested messages.
deny message = This message contains malware ($malware_name)
demime = *
malware = *
# Reject messages containing "viagra" in all kinds of whitespace/case
combinations
# WARNING: this is an example !
deny message = This message matches a blacklisted regular
expression ($regex_match_string)
regex = [Vv] *[Ii] *[Aa] *[Gg] *[Rr] *[Aa] : Prescription :
Pharmacy
# Always add X-Spam-Score and X-Spam-Report headers, using SA
system-wide settings
# (user "nobody"), no matter if over threshold or not.
warn message = X-Spam-Score: $spam_score ($spam_bar)
spam = nobody:true
warn message = X-Spam-Report: $spam_report
spam = nobody:true
warn message = X-New-Subject: [***SPAM***] $h_subject:
spam = nobody
warn message = X-Virus-Scanned: Scanned with Clam AntiVirus
spam = nobody:true
# Add X-Spam-Flag if spam is over system-wide threshold
warn message = X-Spam-Flag: YES
spam = nobody
####################################################################
# Reject spam messages with score over 10, using an extra condition.
# (Keep in mind that $spam_score_int is the messages score
# multiplied by ten).
####################################################################
deny message = This message scored $spam_score points.
Congratulations!
spam = nobody:true
condition = ${if >{$spam_score_int}{100}{1}{0}}
# finally accept all the rest
accept
######################################################################
# ROUTERS CONFIGURATION #
# Specifies how addresses are handled #
######################################################################
# THE ORDER IN WHICH THE ROUTERS ARE DEFINED IS IMPORTANT! #
# An address is passed to each router in turn until it is accepted. #
######################################################################
begin routers
dnslookup:
driver = dnslookup
domains = ! +local_domains
transport = remote_smtp
ignore_target_hosts = 0.0.0.0 : 127.0.0.0/8 : 64.94.110.0/24
no_more
# mailman_router:
# driver = accept
# require_files = MAILMAN_HOME/lists/$local_part/config.pck
# local_part_suffix_optional
# local_part_suffix = -bounces : -bounces+* : \
# -confirm+* : -join : -leave :
\
# -owner : -request : -admin
# transport = mailman_transport
mysql_sys_aliases:
driver = redirect
allow_fail
allow_defer
data = ${lookup mysql {SELECT dest FROM aliases \
WHERE email='${local_part}' AND type="system"}}
mysql_aliases:
driver = redirect
allow_fail
allow_defer
data = ${lookup mysql {SELECT dest FROM aliases \
WHERE email='${local_part}@${domain}' AND type="site"}}
mysql_user:
driver = accept
condition = ${if eq{} {${lookup mysql {SELECT home FROM passwd \
WHERE id='${local_part}@${domain}'}}} {no}{yes}}
retry_use_local_part
transport=mysql_delivery
# exilist posting router
exilist_post_router:
driver = accept
verify_sender = false
condition = ${lookup mysql {select id from lists where
name='$local_part' and domain='$domain'}}
transport = exilist_post_transport
# exilist bounce router
exilist_bounce_router:
driver = accept
verify_sender = false
condition = ${if match
{$local_part}{^[0-9]+_return_[0-9]+\\.[A-Za-z0-9-]+\$}{1}{0}}
transport = exilist_bounce_transport
######################################################################
# TRANSPORTS CONFIGURATION #
######################################################################
# ORDER DOES NOT MATTER #
# Only one appropriate transport is called for each delivery. #
######################################################################
begin transports
remote_smtp:
driver = smtp
mysql_delivery:
driver = appendfile
maildir_format
directory = \
/var/mail/${lookup mysql{SELECT maildir \
FROM passwd WHERE id='${local_part}@${domain}'}}
delivery_date_add
#envelope_to_add = true
#return_path_add = true
maildir_tag = ,S=$message_size
quota = \
"${lookup mysql{SELECT quota FROM passwd WHERE \
user = '$local_part' AND domain = '$domain'}{${value}M}}"
quota_is_inclusive = false
quota_size_regex = S=(\d+):
quota_warn_threshold = 75%
quota_warn_message = "\
To: $local_part@$domain\n\
Subject: Mailbox quota warning\n\n\
This message was automatically generated by the mail
delivery software.\n\n\
You are now using over 75% of your allocated mail
storage quota.\n\n\
If your mailbox fills completely, further incoming
messages will be automatically\n\
returned to their senders.\n\n\
Please take note of this and remove unwanted mail from
your mailbox.\n"
user = 100
group = 100
# headers_add
# message_prefix
# mode
# mailman_transport:
# driver = pipe
# command = MAILMAN_WRAP \
# '${if def:local_part_suffix \
# {${sg{$local_part_suffix}{-(\\w+)(\\+.*)?}{\$1}}}
\
# {post}}' \
# $local_part
# current_directory = MAILMAN_HOME
# home_directory = MAILMAN_HOME
# user = MAILMAN_USER
# group = MAILMAN_GROUP
# exilist post transport
exilist_post_transport:
driver = pipe
command = EXILIST_BIN "${lookup mysql {select id from lists where
name='$local_part' and domain='$domain'}}" post none $message_id
$sender_address $reply_address
user = EXILIST_UID
group = EXILIST_GID
current_directory = EXILIST_HOME
home_directory = EXILIST_HOME
return_fail_output
# exilist bounce transport
exilist_bounce_transport:
driver = pipe
command = EXILIST_BIN ${extract{1}{_}{$local_part}}
${extract{2}{_}{$local_part}} ${extract{3}{_}{$local_part}} $message_id
$sender_address $reply_address
user = EXILIST_UID
group = EXILIST_GID
current_directory = EXILIST_HOME
home_directory = EXILIST_HOME
return_fail_output
######################################################################
# RETRY CONFIGURATION #
######################################################################
begin retry
# Domain Error Retries
# ------ ----- -------
* quota
* * F,2h,15m; G,16h,1h,1.5; F,4d,6h
######################################################################
# REWRITE CONFIGURATION #
######################################################################
# There are no rewriting specifications in this default configuration
file.
begin rewrite
######################################################################
# AUTHENTICATION CONFIGURATION #
######################################################################
# There are no authenticator specifications in this default
configuration file.
begin authenticators
cram_md5:
driver = cram_md5
public_name = CRAM-MD5
server_secret = \
${lookup mysql{SELECT clear FROM passwd \
WHERE id='$1'}{$value}fail}
server_set_id = $1
plain_login:
driver = plaintext
public_name = PLAIN
server_condition = \
${lookup mysql{SELECT if(count(*), "1", "0") \
FROM passwd WHERE id = '${quote_mysql:$2}' and \
clear = '${quote_mysql:$3}'}}
server_set_id = $2
fixed_login:
driver = plaintext
public_name = LOGIN
server_prompts = "Username:: : Password::"
server_condition = \
${lookup mysql{SELECT if(count(*), "1", "0") \
FROM passwd WHERE id = '${quote_mysql:$1}' and \
clear = '${quote_mysql:$2}'}}
server_set_id = $1
# End of Exim configuration file
"
