I am attempting to convert our existing Exim configuration to reference
a PostgreSQL database. The problem is that I am getting errors in the
logs and quite honestly I am not sure as to which section is having the
error. The errors are as follows:
2003-07-25 16:03:22 19g9eu-0001bL-8p == stephen@???
routing defer (-51): retry time not reached
2003-07-25 16:03:33 19g9iv-0001br-FQ <= root@??? U=root
P=local S=340 T="qwer" from <root@???> for
stephen@???
2003-07-25 16:03:33 19g9iv-0001br-FQ == stephen@???
R=remote_delivery defer (-1): domains check lookup or other defer
I am setting this up on a development machine and from what I can tell,
everything is in the database that needs to be there, so I figure it is
a syntax issue with the configuration. The configuration is as follows:
# SMTP router configuration.
# Exim 4.12
# Address of the server administrator.
SERVER_ADMINISTRATOR =
postmaster@???
# The server accepting mail for my local domains.
LOCAL_RELAY_HOST =
pop3.internal.vlnx.net
# Listen on addresses.
local_interfaces =
0.0.0.0
# Specify your host's canonical name here.
primary_hostname =
smtp.internal.vlnx.net
# Domains which are treated as local users.
domainlist domains_local = @
# Domains for which I am the primary mail exchanger.
domainlist domains_primary = pgsql;select
domainname from hostdomains where \
domainname = '${quote_pgsql:$local_part}' and enabled = 1;
# Domains for which I am a backup mail exchanger.
domainlist domains_backup = pgsql;select
domainname from hostdomains where \
domainname =
'${quote_pgsql:$local_part}' and enabled = 1;
# Hosts for which I will relay.
hostlist relay_hosts = pgsql;select
ipblock from relays where \
ipblock =
'${quote_pgsql:$local_part}';
#
net-pgsql;select ipblock from relays where
ipblock='$sender_host_address'
# Hosts which can go away
hostlist black_hosts = pgsql;select
ipaddr from ipblacklist where \
ipaddr =
'${quote_pgsql:$local_part}'; : \
pgsql;select domainname from domainblacklist where \
domainname = '${quote_pgsql:$local_part}';
# Specify the domain you want to be added to all unqualified addresses
# here. An unqualified address is one that does not contain an "@"
character
# followed by a domain. For example, "caesar@???" is a fully
qualified
# address, but the string "caesar" (i.e. just a login name) is an
unqualified
# email address. Unqualified addresses are accepted only from local
callers by
# default. See the recipient_unqualified_hosts option if you want to
permit
# unqualified addresses from remote sources. If this option is not set,
the
# primary_hostname value is used for qualification.
#
qualify_domain = valuelinx.net
# System users exim will never deliver mail as.
never_users
= root
# Get the hostnames of the clients. -- This should probably be
disabled.
host_lookup
= *
# Until MS Exchange is banned from the internet... i suppose we should
accept
# underscores in their fucking hostnames, even though it is a blatant
violation
# of RFC 1031.
helo_allow_chars = _
# No ident requests.
rfc1413_hosts = 0
rfc1413_query_timeout = 30s
# This option unfreezes frozen bounce messages after two days, tries
# once more to deliver them, and ignores any delivery failures.
ignore_bounce_errors_after = 2d
# This option cancels (removes) frozen messages that are older than a
week.
timeout_frozen_after = 7d
# Reset all retry information if a message is this old
retry_data_expire = 7d
auto_thaw
= 1d
#freeze_tell
= SERVER_ADMINISTRATOR
errors_copy
= SERVER_ADMINISTRATOR
errors_reply_to =
SERVER_ADMINISTRATOR
# Number of times to retry the authentication request.
# finduser_retries = 0
# Logging configuration.
log_selector = +all
-arguments -queue_run
message_logs = false
# Queue configuration.
split_spool_directory = true
queue_only_load = 8.00
queue_run_max = 5
# SMTP configuration.
smtp_reserve_hosts =
+relay_hosts
smtp_accept_max = 350
smtp_accept_max_per_host = 20
smtp_accept_queue_per_connection = 40
smtp_accept_reserve = 100
smtp_connect_backlog = 50
smtp_load_reserve = 8.00
smtp_receive_timeout = 3m
# The ACL definitions.
acl_smtp_auth =
acl_auth_main
acl_smtp_rcpt =
acl_rcpt_main
acl_smtp_data =
acl_data_main
acl_smtp_etrn =
acl_etrn_main
acl_smtp_expn =
acl_expn_main
acl_smtp_vrfy =
acl_vrfy_main
# Exiscan configuration.
# .include /etc/exim/exiscan.conf
# PostgreSQL Servers
hide pgsql_servers =
10.1.4.57/XXXXXXXXXXXX/XXXXXXXXXXXXXXX/XXXXXXXXXXXXXXX
######################################################################
# ACL CONFIGURATION #
# Specifies access control lists for incoming SMTP mail #
######################################################################
begin acl
# Authentication for relay hosts.
acl_auth_main: deny
# Message preparation.
acl_rcpt_main:
# Filter usernames with invalid characters.
deny log_message = Invalid
characters in address
message =
invalid characters in address
local_parts = ^.*[@%!/|] :
^\\.
# Accept mail to postmaster without prejudice.
accept domains = +domains_local
: +domains_primary : +domains_backup
local_parts =
postmaster
# Require valid return addresses.
require log_message = bad sender
address ($sender_address) from $sender_host_address
message = unable
to verify the existance of the senders address
verify = sender
# Require valid recipient addresses.
require log_message = bad recipient
address from $sender_host_address
message = unable
to verify the existance of the recipients address
verify =
recipient
# Accept local deliveries.
accept hosts = :
# Accept if the source is from someone I'm allowed to relay for.
accept hosts = +relay_hosts
# Filter blacklisted MTAs
deny message =
$sender_host_address is blacklisted in black.hosts
log_message =
blacklisted sender $sender_host_address
hosts =
+black_hosts
deny message =
$sender_host_address is blacklisted at $dnslist_domain
log_message =
blacklisted sender $sender_host_address
dnslists =
relays.visi.com : sbl.spamhaus.org
# Accept if it is mail for one of my domains.
accept domains = +domains_local
: +domains_primary : +domains_backup
# Otherwise, deny access.
deny log_message = relaying
denied to $domain from $sender_host_address
message = mail
for $domain is not handled by this server
# Message data.
acl_data_main:
accept
# Limit message size?.
# SMTP ETRN requests.
acl_etrn_main:
deny
# SMTP EXPN requests.
acl_expn_main:
deny
# Remote verification of a username's existence.
acl_vrfy_main:
deny
######################################################################
# ROUTERS CONFIGURATION #
# Specifies how addresses are handled #
######################################################################
# THE ORDER IN WHICH THE ROUTERS ARE DEFINED IS IMPORTANT! #
# An address is passed to each router in turn until it is accepted. #
######################################################################
begin routers
# Mail not for me.
remote_delivery:
driver =
dnslookup
transport =
remote_smtp
ignore_target_hosts = 0.0.0.0 :
127.0.0.0/8
domains = !
+domains_local : ! +domains_primary
# Mail for my primary domains.
remote_forward:
driver =
manualroute
transport =
remote_smtp
domains =
+domains_primary
route_data =
LOCAL_RELAY_HOST
ignore_target_hosts = 127.0.0.0/8 :
10.0.0.0/8 : 192.168.0.0/16
# Rewrite any aliases from /etc/aliases
system_aliases:
driver =
redirect
file_transport = address_file
pipe_transport = address_pipe
data =
pgsql;select from ipblacklist where \
ipaddr = '${quote_pgsql:$local_part}';
allow_fail
allow_defer
# Execute the contents of the user's ~/.forward
dotforward:
driver =
redirect
file_transport = address_file
pipe_transport = address_pipe
reply_transport = address_reply
file =
$home/.forward
check_local_user
no_verify
no_expn
check_ancestor
# Mail for a local user.
local_user:
driver = accept
transport =
local_mailspool
check_local_user
######################################################################
# TRANSPORTS CONFIGURATION #
######################################################################
# ORDER DOES NOT MATTER #
# Only one appropriate transport is called for each delivery. #
######################################################################
begin transports
# This transport is used for delivering messages over SMTP connections.
remote_smtp:
driver = smtp
# This transport is used for local delivery.
# Deliver to /var/mail/<username> in maildir format.
local_mailspool:
driver =
appendfile
directory =
${lookup pgsql{SELECT mailspool from users \
where username = '$local_part'}{$value}}
maildir_format = true
create_directory = true
directory_mode = 0770
mode = 0660
group = mail
# Enforce a user mail spool size quota.
quota = 20M
quota_warn_threshold = 75%
maildir_tag =
,S=$message_size
quota_size_regex = ,S=(\d+)
delivery_date_add
envelope_to_add
return_path_add
address_file:
driver =
appendfile
delivery_date_add
envelope_to_add
return_path_add
address_pipe:
driver = pipe
return_output
address_reply:
driver =
autoreply
######################################################################
# RETRY CONFIGURATION #
######################################################################
begin retry
# This single retry rule applies to all domains and all errors. It
specifies
# retries every 15 minutes for 2 hours, then increasing retry intervals,
# starting at 1 hour and increasing each time by a factor of 1.5, up to
16
# hours, then retries every 6 hours until 4 days have passed since the
first
# failed delivery.
# Domain Error Retries
* *
F,2h,15m; G,16h,1h,1.5; F,4d,6h
######################################################################
# REWRITE CONFIGURATION #
######################################################################
begin rewrite
######################################################################
# AUTHENTICATION CONFIGURATION #
######################################################################
begin authenticators
# End of Exim configuration file
# vim: ts=4 sw=4 ft=conf ai
I am totally at a loss and have been looking at this configuration so
long that I can not see what is wrong. Please HELP.... :) Thanks in
advance.
Stephen
