Hey gang!
I'm having a strange problem with VmailSQL and Exim 3.36 #1.
I have a virtual sub-domain address that accepts and delivers fine if mail
is sent from a computer on the local internal LAN.
But incoming mail from the outside world gets directed wrong.
user@???
gets sent to
user@??? (minus the subdomain)
and naturally, that "user" doesn't exist.
In exim Mainlog I see:
verify failed for SMTP recipient user@??? from <email@???>
H=ip number
Any of the debug commands I know for the command line all involve local
delivery and that part works so all those tests do too. Nothing is kept in
the queue so I can't run tests on frozen messages (all get immediately
returned).
I also run mailscanner so I have two instances of exim running. One uses
configure as the config file and the other uses exim_outgoing as the
config file. They are both the same except for a line in one that says
queue only.
Parts of my configure file are as follows. I'm kinda thinking the order of
the Virtual domain vs. Local stuff needs to corrected??
######################################################################
# MAIN CONFIGURATION SETTINGS #
######################################################################
LOCAL_ALIASES = /etc/mail/local_aliases
message_filter = /usr/local/etc/exim/system_filter.exim
message_body_visible = 5000
deliver_queue_load_max = 8
smtp_accept_max = 20
smtp_accept_max_per_host = 10
spool_directory = /var/spool/exim_incoming
queue_only = true
# reject messages whose sending host is in MAPS/RBL & MAP/DUL
# add warning to messages whose sending host is in RSS
rbl_domains = relays.ordb.org/reject
# check all hosts other than those on internal network
rbl_hosts = !192.168.0.1/24:0.0.0.0/0
# but allow mail to postmaster@??? even from rejected host
recipients_reject_except = postmaster@???
# change some logging actions (collect more data)
rbl_log_headers
rbl_log_rcpt_count
primary_hostname = scaryg.shacknet.nu
qualify_domain = scaryg.shacknet.nu
hide mysql_servers = localhost::3306/dbname/user/passwd
# qualify_recipient =
local_domains = scaryg.shacknet.nu:/etc/mail/local-host-names
forbid_domain_literals
exim_user = mailnull
exim_group = mail
never_users = root
host_accept_relay = localhost : 192.168.0.0/24 : 127.0.0.1 :
scaryg.shacknet.nu
relay_domains = scaryg.shacknet.nu:/etc/mail/relay-domains
host_lookup = *
receiver_verify
sender_verify
ignore_errmsg_errors_after = 2d
timeout_frozen_after = 7d
######################################################################
# TRANSPORTS CONFIGURATION #
######################################################################
# ORDER DOES NOT MATTER #
# Only one appropriate transport is called for each delivery. #
######################################################################
# A transport is used only when referenced from a director or a router
# that successfully handles an address.
# This transport is to deliver mail going to virtual domains to user
# mailspools in directories under /var/spool/mail/SERVERS/foo/bar; this is
# triggered from a director below.
virtual_localdelivery:
driver = appendfile
file = ${lookup mysql{select path from domain left join domain_alias on
domain_alias.domain_name = domain.domain_name where domain.domain_name =
'$domain' or domain_alias.alias = '$domain'}{$value}fail}/${lookup
mysql{select mbox_name from popbox left join domain_alias on
popbox.domain_name = domain_alias.domain_name where (popbox.domain_name =
'$domain' or domain_alias.alias = '$domain') and local_part =
'$local_part'}{$value}fail}
delivery_date_add
envelope_to_add
return_path_add
user = ${lookup mysql{select unix_user from domain left join
domain_alias on domain_alias.domain_name = domain.domain_name where
domain.domain_name = '$domain' or domain_alias.alias =
'$domain'}{$value}fail}
mode = 0660
# This transport is used for delivering messages over SMTP connections.
remote_smtp:
driver = smtp
# This transport is used for local delivery to user mailboxes in
# traditional BSD mailbox format. By default it will be run under the uid
# and gid of the local user, and requires the sticky bit to be set on the
# /var/mail directory. Some systems use the alternative approach of
# running mail deliveries under a particular group instead of using the
# sticky bit. The commented options below show how this can be done.
local_delivery:
driver = appendfile
file = /var/mail/$local_part
delivery_date_add
envelope_to_add
return_path_add
group = mail
mode = 0660
# This transport is used for handling pipe deliveries generated by alias
# or .forward files. If the pipe generates any standard output, it is
# returned to the sender of the message as a delivery error. Set
# return_fail_output instead of return_output if you want this to happen
# only when the pipe fails to complete normally. You can set different
# transports for aliases and forwards if you want to - see the references
# to address_pipe in the directors section below.
address_pipe:
driver = pipe
return_output
# This transport is used for handling deliveries directly to files that
# are generated by aliasing or forwarding.
address_file:
driver = appendfile
delivery_date_add
envelope_to_add
return_path_add
# This transport is used for handling autoreplies generated by the
# filtering option of the forwardfile director.
address_reply:
driver = autoreply
######################################################################
# DIRECTORS CONFIGURATION #
# Specifies how local addresses are handled #
######################################################################
# ORDER DOES MATTER #
# A local address is passed to each in turn until it is accepted. #
######################################################################
bounce_spam_master:
driver = smartuser
require_files = /usr/local/etc/exim/bouncelist
senders = /usr/local/etc/exim/bouncelist
new_address = :fail: "unknown local-part \"$local_part\" in domain
\"$domain\""
bounce_spam_personal:
driver = smartuser
senders = /home/$local_part/.bouncelist
require_files = /home/$local_part/.bouncelist
new_address = :fail: unknown local-part \"$local_part\" in domain
\"$domain\"
system_aliases:
domains = LOCAL_ALIASES
driver = aliasfile
file = /etc/mail/aliases
search_type = lsearch
user = exim
group = mail
qualify_preserve_domain = true
file_transport = address_file
pipe_transport = address_pipe
userforward:
domains = LOCAL_ALIASES
driver = forwardfile
file = .forward
no_verify
no_expn
check_ancestor
# filter
file_transport = address_file
pipe_transport = address_pipe
reply_transport = address_reply
match_directory = !^/nonexistent
# This director matches local user mailboxes.
localuser:
domains = LOCAL_ALIASES
driver = localuser
transport = local_delivery
# For Virtual Email Stuff
# Handle forwarders and aliases (same database table)
virtual_forward:
driver = aliasfile
search_type = mysql
query = "select remote_name from forwarder left join domain_alias on
domain_alias.domain_name = forwarder.domain_name where local_part =
'$local_part' and (forwarder.domain_name = '$domain' or alias =
'$domain')"
forbid_file = true
forbid_pipe = true
# Handle delivery; see sample config C009 for what this is based on; it
# only handles things for the virtual domains, which are listed in the
# database.
virtual_localuser:
driver = aliasfile
search_type = mysql
query = "select mbox_name from popbox left join domain_alias on
domain_alias.domain_name = popbox.domain_name where local_part =
'$local_part' and (popbox.domain_name = '$domain' or alias = '$domain')"
transport = virtual_localdelivery
# deliver any undelivered virtual email according to the _default_
# forwarder
virtual_defaultuser:
driver = aliasfile
search_type = mysql
query = "select remote_name from forwarder left join domain_alias on
domain_alias.domain_name = forwarder.domain_name where local_part =
'_default_' and (forwarder.domain_name = '$domain' or domain_alias.alias =
'$domain')"
forbid_file = true
forbid_pipe = true
######################################################################
# ROUTERS CONFIGURATION #
# Specifies how remote addresses are handled #
######################################################################
# ORDER DOES MATTER #
# A remote address is passed to each in turn until it is accepted. #
######################################################################
send_to_gateway:
driver = domainlist
transport = remote_smtp
route_list = * smtp1.sympatico.ca byname
######################################################################
# RETRY CONFIGURATION #
######################################################################
* * F,2h,15m; G,16h,1h,1.5; F,4d,8h
######################################################################
# REWRITE CONFIGURATION #
######################################################################
# There are no rewriting specifications in this default configuration
# file.
######################################################################
# AUTHENTICATION CONFIGURATION #
######################################################################
# There are no authenticator specifications in this default configuration
# file.
# End of Exim configuration file
