It's not that the user isn't there. You're sending mail out through
exim to a remote (yahoo in this case) address. The error you're getting
is because the host you are sending mail from isn't in exim's
host_accept_relay.
wokness monster wrote:
>
> Here it is:
>
> ironhide# ./exim -d9 -bd
> Exim version 3.16 debug level 9 uid=0 gid=0
> probably Berkeley DB version 1.8x (native mode)
> Caller is an admin user
> Caller is a trusted user
> port = 25
> listening on all interfaces
> pid written to /var/spool/exim/exim-daemon.pid-bd
> LOG: 0 MAIN
> exim 3.16 daemon started: pid=15948, no queue runs, listening for SMTP
> on port 25
> set_process_info: 15948 3.16 daemon: no queue runs, port 25
> daemon running with uid=0 gid=0 euid=0 egid=0
> listening on port 25...
>
> Connection request from 192.168.1.10
> 1 SMTP accept process running
> listening on port 25...
> interface address = 24.20.186.66
> host in rfc1413_hosts? yes (*)
> sender_fullhost = [192.168.1.10]
> sender_rcvhost = [192.168.1.10]
> Process 710 is handling incoming connection from [192.168.1.10]
> host in host_lookup? yes (0.0.0.0/0)
> looking up host name for 192.168.1.10
> IP address lookup yielded soundwave
> Alias soundwave.wokness.com
> Actual local interface address is 127.0.0.1
> Actual local interface address is 24.20.186.66
> Actual local interface address is 192.168.1.1
> soundwave 192.168.1.10 mx=-1
> sender_fullhost = soundwave [192.168.1.10]
> sender_rcvhost = soundwave ([192.168.1.10])
> set_process_info: 710 3.16 handling incoming connection from soundwave
> [192.168.1.10]
> host in host_reject? no (option unset)
> host in host_reject_recipients? no (option unset)
> host in auth_hosts? no (option unset)
> host in sender_unqualified_hosts? no (option unset)
> host in receiver_unqualified_hosts? no (option unset)
> host in helo_verify? no (option unset)
> host in helo_accept_junk_hosts? no (option unset)
> 220 ironhide.wokness.com ESMTP Exim 3.16 #2 Sun, 17 Sep 2000 16:00:47
> +0000
> set_process_info: 710 3.16 handling incoming connection from soundwave
> [192.168.1.10]
> ready for new message
> smtp_setup_msg entered
> SMTP<< HELO soundwave
> sender_fullhost = soundwave [192.168.1.10]
> sender_rcvhost = soundwave ([192.168.1.10])
> set_process_info: 710 3.16 handling incoming connection from soundwave
> [192.168.1.10]
> 250 ironhide.wokness.com Hello soundwave [192.168.1.10]
> SMTP<< RSET
> 250 Reset OK
> SMTP<< MAIL FROM:<wokness@???>
> wokness@??? in sender_reject? no (option unset)
> wokness@??? in sender_reject_recipients? no (option unset)
> 250 <wokness@???> is syntactically correct
> SMTP<< RCPT TO:<wokness@???>
> yahoo.com in local_domains? no (end of list)
> yahoo.com in relay_domains? no (end of list)
> host in host_accept_relay? no (option unset)
> 550 relaying to <wokness@???> prohibited by administrator
> LOG: 1 MAIN REJECT
> refused relay (host) to <wokness@???> from <wokness@???>
> H=soundwave [192.168.1.10]
> SMTP<< QUIT
> 221 ironhide.wokness.com closing connection
> child 710 ended: status=0x0
> 0 SMTP accept processes now running
> listening on port 25...
>
> it just stay's at that point, even if I type enter.
>
> I don't know much about exim, but is don't you have to tell it that there
> are users somewhere, like in the config. file? All I have done, is added
> a user using OpenBSD's adduser command. Also, here are the setting for
> Eudora (my domain is wokness, and the user I am trying to add is wokness):
>
> SMTP: wokness.com
> POP Account: wokness@??? (I don't have any POP software installed
> yet)
> Real Name: wokness
>
> Oh, ya, if I su to wokness, then type ./exim -d9 user@domain, I can send
> e-mail out to whoever on the internet.
>
> Thanks,
> Wokness
>
> ---- George Schlossnagle <george@???> wrote:
> > Can you run exim -d9 -bd, and try to send mail through eudora, and
> > post
> > the resultant output.
> >
> > wokness monster wrote:
> > >
> > > I just want a single user account. I just want a account like user@???.
> > > Nothing facny. I tried just adding a user account (useradd user)
> > but
> > > eudora gives me a error every time I try and send a e-mail: recipiant
> > > not acceptable to your SMTP server. Also, whenever I try and send
> > a e-mail
> > > from outside (eg. yahoo.com) it never gets through. Can you guys
> > tell
> > > me what I need to tell exim to recognize the accounts?
> > >
> > > Thanks,
> > > Wokness
> > >
> > > ---- Derrick MacPherson <derrick@???> wrote:
> > > > You could just add user accounts to the machine, and make the shell
> > > > /etc/ftponly or something similiar.. How many accounts are youdoing?
> > > > Are
> > > > they virtual domains involved?
> > > >
> > > > On Sun, 17 Sep 2000, wokness monster wrote:
> > > >
> > > > > Hi,
> > > > > I have just installed exim (the lastest ver) on my OpenBSD
> > 2.7
> > > > box.
> > > > > Now I have everything running (exim is running in daemon mode)
> > and
> > > > everything,
> > > > > I can even send mail if I tell it to do it directally (./exim
> > -d9
> > > > user@???)
> > > > > but I can not figure out how to add users so I can use my e-mail
> > > > client
> > > > > (eudora) to send e-mail. Please don't tell me to RTFM, beacuse
> > I
> > > > looked
> > > > > at the doc's on exim.org and could not find anything that told
> > me
> > > > how
> > > > > to add users. Keep in mind, I am new to exim and mail serving,
> > so
> > > > if
> > > > > anyone could lead me step by step through this process, I would
> > really
> > > > > appreaciate it.
> > > > >
> > > > >
> > > > > Thanks,
> > > > > Wokness
> > > > >
> > > > > ___________________________________________________________________
> > > > > To get your own FREE ZDNet Onebox - FREE voicemail, email, and
> > fax,
> > > > > all in one place - sign up today at http://www.zdnetonebox.com
> > > > >
> > > > >
> > > > > --
> > > > > ## List details at http://www.exim.org/mailman/listinfo/exim-users
> > > > Exim details at http://www.exim.org/ ##
> > > > >
> > > > >
> > > >
> > > >
> > >
> > > ___________________________________________________________________
> > > To get your own FREE ZDNet Onebox - FREE voicemail, email, and fax,
> > > all in one place - sign up today at http://www.zdnetonebox.com
> > >
> > > --
> > > ## List details at http://www.exim.org/mailman/listinfo/exim-users
> > Exim details at http://www.exim.org/ ##
> >
>
> ___________________________________________________________________
> To get your own FREE ZDNet Onebox - FREE voicemail, email, and fax,
> all in one place - sign up today at http://www.zdnetonebox.com
>
> --
> ## List details at http://www.exim.org/mailman/listinfo/exim-users Exim details at http://www.exim.org/ ##
