[Exim] Local and remote access

Kezdőlap
Üzenet törlése
Válasz az üzenetre
Szerző: Frédéric Roux
Dátum:  
Címzett: Exim List
Tárgy: [Exim] Local and remote access
Hello,

First, I apologize my english.
I use Exim since sometimes.
I work in workstation with Dial-up connection to Internet.
I want sent mail localy and SMTP.
Localy, it's ok. But, with SMTP I had error messages.
I resolved that, with address rewriting process.
But now, when I send a local message, the sender appear with the
external address.
my domain : linux.alfred.fr
my external address domain : free.fr
local login : frederic
pop login : frederic.roux

My rewriting mask : frederic@*.alfred.fr frederic.roux@???
I read the manual, but I have not resolved the problem.

I have remarked one thing :
When I have connection on the net (dial-up) and I send a SMTP message,
this one go in outbox. Not in the spool. ????????

I join my exim.conf file

Thanks in advance.

Frédéric

######################################################################
#                  Runtime configuration file for Exim               #
######################################################################



# This is a default configuration file which will operate correctly in
# uncomplicated installations. Please see the manual for a complete list
# of all the runtime configuration options that can be included in a
# configuration file. There are many more than are mentioned here. The
# manual is in the file doc/spec.txt in the Exim distribution as a plain
# ASCII file. Other formats (PostScript, Texinfo, HTML, PDF) are available
# from the Exim ftp sites. The manual is also online via the Exim web sites.


# This file is divided into several parts, all but the last of which are
# terminated by a line containing the word "end". The parts must appear
# in the correct order, and all must be present (even if some of them are
# in fact empty). Blank lines, and lines starting with # are ignored.



######################################################################
#                    MAIN CONFIGURATION SETTINGS                     #
######################################################################


# Specify your host's canonical name here. This should normally be the fully
# qualified "official" name of your host. If this option is not set, the
# uname() function is called to obtain the name.

# primary_hostname = linux.alfred.fr


# Specify the domain you want to be added to all unqualified addresses
# here. An unqualified address is one that does not contain an "@" character
# followed by a domain. For example, "caesar@???" is a fully qualified
# address, but the string "caesar" (i.e. just a login name) is an unqualified
# email address. Unqualified addresses are accepted only from local callers by
# default. See the receiver_unqualified_{hosts,nets} options if you want
# to permit unqualified addresses from remote sources. If this option is
# not set, the primary_hostname value is used for qualification.

# qualify_domain = alfred.fr


# If you want unqualified recipient addresses to be qualified with a different
# domain to unqualified sender addresses, specify the recipient domain here.
# If this option is not set, the qualify_domain value is used.

# qualify_recipient = alfred.fr


# Specify your local domains as a colon-separated list here. If this option
# is not set (i.e. not mentioned in the configuration file), the
# qualify_recipient value is used as the only local domain. If you do not want
# to do any local deliveries, uncomment the following line, but do not supply
# any data for it. This sets local_domains to an empty string, which is not
# the same as not mentioning it at all. An empty string specifies that there
# are no local domains; not setting it at all causes the default value (the
# setting of qualify_recipient) to be used.

local_domains = alfred.fr:localhost


# If you want to accept mail addressed to your host's literal IP address, for
# example, mail addressed to "user@???", then uncomment the
# following line, or supply the literal domain(s) as part of "local_domains"
# above.

local_domains_include_host = true
local_domains_include_host_literals = true


# No local deliveries will ever be run under the uids of these users (a colon-
# separated list). An attempt to do so gets changed so that it runs under the
# uid of "nobody" instead. This is a paranoic safety catch. Note the default
# setting means you cannot deliver mail addressed to root as if it were a
# normal user. This isn't usually a problem, as most sites have an alias for
# root that redirects such mail to a human administrator.

never_users = root

# The use of your host as a mail relay by any host, including the local host
# calling its own SMTP port, is locked out by default. If you want to permit
# relaying from the local host, you should set
#

# host_accept_relay = localhost

host_accept_relay = 127.0.0.1:freesbee.fr
smtp_accept_queue_per_connection = 0

#
# If you want to permit relaying through your host from certain hosts or IP
# networks, you need to set the option appropriately, for example
#
# host_accept_relay = my.friends.host : 131.111.0.0/16
#
# If you are an MX backup or gateway of some kind for some domains, you must
# set relay_domains to match those domains. This will allow any host to
# relay through your host to those domains.
#
# See the section of the manual entitled "Control of relaying" for more
# information.


# The setting below causes Exim to do a reverse DNS lookup on all incoming
# IP calls, in order to get the true host name. If you feel this is too
# expensive, you can specify the networks for which a lookup is done, or
# remove the setting entirely.

host_lookup = 0.0.0.0/0


# By default, Exim expects all envelope addresses to be fully qualified, that
# is, they must contain both a local part and a domain. If you want to accept
# unqualified addresses (just a local part) from certain hosts, you can specify
# these hosts by setting one or both of
#
# receiver_unqualified_hosts =
# sender_unqualified_hosts =
#
# to control sender and receiver addresses, respectively. When this is done,
# unqualified addresses are qualified using the settings of qualify_domain
# and/or qualify_recipient (see above).

relay_domains =
no_relay_domains_include_local_mx
no_relay_match_host_or_sender

sender_address_relay = freesbee.fr


# By default, Exim does not make any checks, other than syntactic ones, on
# incoming addresses during the SMTP dialogue. This reduces delays in SMTP
# transactions, but it does mean that you might accept messages with unknown
# recipients, and/or bad senders.

# Uncomment this line if you want incoming recipient addresses to be verified
# during the SMTP dialogue. Unknown recipients are then rejected at this stage,
# and the generation of a failure message is the job of the sending host.

# receiver_verify

# Uncomment this line if you want incoming sender addresses (return-paths) to
# be verified during the SMTP dialogue. Verification can normally only check
# that the domain exists.

# sender_verify

prohibition_message = contact postmaster@???
recipients_reject_except = postmaster@???



# Exim contains support for the Realtime Blocking List (RBL) that is being
# maintained as part of the DNS. See http://maps.vix.com/rbl/ for background.
# Uncommenting the first line below will make Exim reject mail from any
# host whose IP address is blacklisted in the RBL at maps.vix.com. Some
# others have followed the RBL lead and have produced other lists: DUL is
# a list of dial-up addresses, and ORBS is a list of open relay systems. The
# second line below checks all three lists.

# rbl_domains = rbl.maps.vix.com
# rbl_domains = rbl.maps.vix.com:dul.maps.vix.com:relays.orbs.org


# If you want Exim to support the "percent hack" for all your local domains,
# uncomment the following line. This is the feature by which mail addressed
# to x%y@z (where z is one of your local domains) is locally rerouted to
# x@y and sent on. Otherwise x%y is treated as an ordinary local part.

# percent_hack_domains = *

# Exim runs as user 'mail' and group 'mail'.
# -- Mark Bergsma <mark@???>

exim_user = mail
exim_group = mail

end



######################################################################
#                      TRANSPORTS CONFIGURATION                      #
######################################################################
#                       ORDER DOES NOT MATTER                        #
#     Only one appropriate transport is called for each delivery.    #
######################################################################


# A transport is used only when referenced from a director or a router that
# successfully handles an address.


# This transport is used for delivering messages over SMTP connections.

remote_smtp:
driver = smtp

# Use procmail, because RedHat's sendmail configuration uses procmail
# in it's default configuration as well.
# -- Mark Bergsma <mark@???>

procmail:
driver = pipe
command = "/usr/bin/procmail -Y -d ${local_part}"

# This transport is used for local delivery to user mailboxes. By default
# it will be run under the uid and gid of the local user, and requires
# the sticky bit to be set on the /var/mail directory. Some systems use
# the alternative approach of running mail deliveries under a particular
# group instead of using the sticky bit. The commented options below show
# how this can be done.

# RedHat Linux uses /var/spool/mail/${local_part} as the system mailbox.
# Mail is delivered using the group 'mail'. In most cases this transport
# is not used, however, because RedHat uses Procmail by default.
# -- Mark Bergsma <mark@???>

local_delivery:
driver = appendfile
file = /var/spool/mail/${local_part}
delivery_date_add
envelope_to_add
return_path_add
group = mail
mode = 0660


# This transport is used for handling pipe deliveries generated by alias
# or .forward files. If the pipe generates any standard output, it is returned
# to the sender of the message as a delivery error. Set return_fail_output
# instead of return_output if you want this to happen only when the pipe fails
# to complete normally. You can set different transports for aliases and
# forwards if you want to - see the references to address_pipe below.

address_pipe:
driver = pipe
return_output


# This transport is used for handling deliveries directly to files that are
# generated by aliassing or forwarding.

address_file:
driver = appendfile
delivery_date_add
envelope_to_add
return_path_add


# This transport is used for handling autoreplies generated by the filtering
# option of the forwardfile director.

address_reply:
driver = autoreply


end



######################################################################
#                      DIRECTORS CONFIGURATION                       #
#             Specifies how local addresses are handled              #
######################################################################
#                          ORDER DOES MATTER                         #
#   A local address is passed to each in turn until it is accepted.  #
######################################################################


# Local addresses are those with a domain that matches some item in the
# "local_domains" setting above, or those which are passed back from the
# routers because of a "self=local" setting (not used in this configuration).


# This director handles aliasing using a traditional /etc/aliases file.
# If any of your aliases expand to pipes or files, you will need to set
# up a user and a group for these deliveries to run under. You can do
# this by uncommenting the "user" option below (changing the user name
# as appropriate) and adding a "group" option if necessary. Alternatively, you
# can specify "user" on the transports that are used. Note that those
# listed below are the same as are used for .forward files; you might want
# to set up different ones for pipe and file deliveries from aliases.

system_aliases:
driver = aliasfile
# search_type = lsearch
search_type = dbm
file = /etc/exim/aliases.db
# user = exim
file_transport = address_file
pipe_transport = address_pipe
include_domain = true
expand = true


# This director handles forwarding using traditional .forward files.
# If you want it also to allow mail filtering when a forward file
# starts with the string "# Exim filter", uncomment the "filter" option.

# The no_verify setting means that this director will be skipped when
# verifying addresses if sender_verify or receiver_verify is set (though
# they are not set by default). Similarly, no_expn means that this director
# will be skipped if smtp_expn_hosts is set to allow any hosts to use the
# EXPN command.

# The check_ancestor option means that if the forward file generates an
# address that is an ancestor of the current one, the current one gets
# passed on instead. This covers the case where A is aliased to B and B
# has a .forward file pointing to A.

# The three transports specified at the end are those that are used when
# forwarding generates a direct delivery to a file, or to a pipe, or sets
# up an auto-reply, respectively.

userforward:
driver = forwardfile
file = .forward
no_verify
no_expn
check_ancestor
filter = true
file_transport = address_file
pipe_transport = address_pipe
reply_transport = address_reply


# Use procmail by default.
# -- Mark Bergsma <mark@???>

procmail:
driver = localuser
transport = procmail
require_files = /usr/bin/procmail


# This director matches local user mailboxes.

localuser:
driver = localuser
transport = local_delivery

defer_unknown:
driver=smartuser
new_address = postmaster@???

end



######################################################################
#                      ROUTERS CONFIGURATION                         #
#            Specifies how remote addresses are handled              #
######################################################################
#                          ORDER DOES MATTER                         #
#  A remote address is passed to each in turn until it is accepted.  #
######################################################################


# Remote addresses are those with a domain that does not match any item
# in the "local_domains" setting above.

smarthost:
driver = domainlist
transport = remote_smtp
route_list = "* smtp.freesbee.fr bydns_a"

# This router routes to remote hosts over SMTP using a DNS lookup with
# default options.

lookuphost:
driver = lookuphost
transport = remote_smtp


# This router routes to remote hosts over SMTP by explicit IP address,
# given as a "domain literal" in the form [nnn.nnn.nnn.nnn]. The RFCs
# require this facility, which is why it is enabled by default in Exim.
# If you want to lock it out, set forbid_domain_literals in the main
# configuration section above.

literal:
driver = ipliteral
transport = remote_smtp


end



######################################################################
#                      RETRY CONFIGURATION                           #
######################################################################


# This single retry rule applies to all domains and all errors. It specifies
# retries every 15 minutes for 2 hours, then increasing retry intervals,
# starting at 1 hour and increasing each time by a factor of 1.5, up to 16
# hours, then retries every 8 hours until 4 days have passed since the first
# failed delivery.

# Domain               Error       Retries
# ------               -----       -------


*                      *           F,2h,15m; G,16h,1h,1.5; F,4d,8h


end



######################################################################
#                      REWRITE CONFIGURATION                         #
######################################################################


# There are no rewriting specifications in this default configuration file.
anais@*.alfred.fr anais.roux@??? Eh
gaetan@*.alfred.fr gaetan.roux@??? Eh
frederic@*.alfred.fr frederic.roux@??? Eh
quentin@*.alfred.fr quentin.roux@??? Eh

# *@*.alfred.fr $1@??? Eh
# *@*.free.fr frederic.roux@??? Eh
# *@* $1@${qualify_domain} X

# End of Exim configuration file