Hello all,
I`ve got next exim:
>exim -bV
Exim version 4.63 #0 (FreeBSD 6.1) built 24-Oct-2006 09:40:41
Copyright (c) University of Cambridge 2006
Probably Berkeley DB version 1.8x (native mode)
Support for: crypteq iconv() IPv6 use_setclassresources PAM Perl OpenSSL Content
_Scanning Old_Demime
Lookups: lsearch wildlsearch nwildlsearch iplsearch cdb dbm dbmnz dnsdb dsearch
nis nis0 passwd
Authenticators: cram_md5 plaintext spa
Routers: accept dnslookup ipliteral manualroute queryprogram redirect
Transports: appendfile/maildir/mailstore/mbx autoreply lmtp pipe smtp
Fixed never_users: 0
Size of off_t: 8
Configuration file is /usr/local/etc/exim/configure
running on FreeBSD-6.1-p10
Exim handles several virtual mailboxes, mail from which is delivered
to local users + forwarded to some external mail addresses. And here i
got problems with forwarding message to gmail.com mailboxes. Main exim
log shows broken pipe error, trying to deliver this message using exim
-d+all -M messageId shows this:
21:43:39 69670 Connecting to alt1.gmail-smtp-in.l.google.com
[72.14.205.27]:25 from 212.113.104.1 ... connected
21:43:39 69670 waiting for data on socket
21:43:39 69670 read response data: size=41
21:43:39 69670 SMTP<< 220 mx.google.com ESMTP e17si1829990qbe
21:43:39 69670 72.14.205.27 in hosts_avoid_esmtp? no (option unset)
21:43:39 69670 SMTP>> EHLO smtp.(our_real_domain).net
21:43:39 69670 waiting for data on socket
21:43:39 69670 read response data: size=110
21:43:39 69670 SMTP<< 250-mx.google.com at your service, [212.113.104.1]
21:43:39 69670 250-SIZE 20971520
21:43:39 69670 250-8BITMIME
21:43:39 69670 250 ENHANCEDSTATUSCODES
21:43:39 69670 72.14.205.27 in hosts_require_tls? no (option unset)
21:43:39 69670 not using PIPELINING
21:43:39 69670 72.14.205.27 in hosts_require_auth? no (option unset)
21:43:39 69670 SMTP>> MAIL FROM:<root@smtp.(our_real_domain).net> SIZE=1180892
21:43:39 69670 waiting for data on socket
21:43:41 69670 read response data: size=8
21:43:41 69670 SMTP<< 250 OK
21:43:41 69670 SMTP>> RCPT TO:<tucker102@???>
21:43:41 69670 waiting for data on socket
21:43:41 69670 read response data: size=14
21:43:41 69670 SMTP<< 250 2.1.5 OK
21:43:41 69670 SMTP>> DATA
21:43:41 69670 waiting for data on socket
21:43:42 69670 read response data: size=14
21:43:42 69670 SMTP<< 354 Go ahead
21:43:42 69670 SMTP>> writing message and terminating "."
21:43:42 69670 writing data block fd=8 size=8189 timeout=300
21:43:42 69670 writing data block fd=8 size=8189 timeout=300
21:43:42 69670 writing data block fd=8 size=8189 timeout=300
21:43:42 69670 writing data block fd=8 size=8189 timeout=300
21:43:42 69670 writing data block fd=8 size=8189 timeout=300
21:43:42 69670 writing data block fd=8 size=8189 timeout=300
21:43:43 69670 writing data block fd=8 size=8189 timeout=300
21:43:51 69670 writing data block fd=8 size=8189 timeout=300
21:43:51 69670 writing data block fd=8 size=8189 timeout=300
21:43:51 69670 writing data block fd=8 size=8189 timeout=300
21:43:52 69670 writing data block fd=8 size=8189 timeout=300
21:43:52 69670 writing data block fd=8 size=8189 timeout=300
21:43:52 69670 writing data block fd=8 size=8189 timeout=300
21:43:53 69670 writing data block fd=8 size=8189 timeout=300
21:43:53 69661 selecting on subprocess pipes
21:43:54 69670 writing data block fd=8 size=8189 timeout=300
21:43:54 69670 writing data block fd=8 size=8189 timeout=300
21:43:54 69670 writing data block fd=8 size=8189 timeout=300
21:43:57 69670 writing data block fd=8 size=8189 timeout=300
21:43:57 69670 writing data block fd=8 size=8189 timeout=300
21:44:00 69670 writing data block fd=8 size=8189 timeout=300
21:44:19 69670 writing error 32: Broken pipe
21:44:19 69670 ok=0 send_quit=0 send_rset=1 continue_more=0 yield=1
first_address is NULL
21:44:19 69670 LOG: MAIN
21:44:19 69670 alt1.gmail-smtp-in.l.google.com [72.14.205.27]: Broken pipe
It usually happens with medium and large message (letter with size
less than 100kb is always delivered). As i can see from logs, first
portion of data goes in instant and then delay appears. It may look at
network problem, but there is 2 things:
1. Downloading/uploading large files from/to our SMTP server (via
HTTP/FTP) is working fine. (no problems with 100Mb files)
2. Before Exim, sendmail was used as MTA and i was told that
forwarding to gmail of any messages were working properly.
Do you have any ideas about this issue or any ways that can help to
dig it and figure the problem?
Here is exim config:
primary_hostname = smtp.102x.net
domainlist local_domains = @ : lsearch;/usr/local/etc/exim/virtual/domainslist
domainlist relay_to_domains =
hostlist relay_from_hosts = localhost
acl_smtp_rcpt = acl_check_rcpt
acl_smtp_data = acl_check_data
av_scanner = clamd:/var/run/clamav/clamd
spamd_address = 127.0.0.1 783
exim_user = mailnull
exim_group = mail
never_users = root
host_lookup = *
rfc1413_hosts = *
rfc1413_query_timeout = 5s
ignore_bounce_errors_after = 2d
timeout_frozen_after = 7d
begin acl
acl_check_rcpt:
accept hosts = :
deny message = Restricted characters in address
domains = +local_domains
local_parts = ^[.] : ^.*[@%!/|]
deny message = Restricted characters in address
domains = !+local_domains
local_parts = ^[./|] : ^.*[@%!] : ^.*/\\.\\./
accept local_parts = postmaster
domains = +local_domains
require verify = sender
accept hosts = +relay_from_hosts
control = submission
accept authenticated = *
control = submission
require message = relay not permitted
domains = +local_domains : +relay_to_domains
require message = unknown user
verify = recipient
accept
acl_check_data:
deny malware = *
message = Virus ($malware_name) was found. Message rejected.
warn spam = nobody
add_header = X-Spam_score: $spam_score\n\
X-Spam_score_int: $spam_score_int\n\
X-Spam_bar: $spam_bar\n\
X-Spam_report: $spam_report
deny spam = nobody
message = This message is considered to be spam. Please, if it
is wrong, re-send plain text message describing problem to same mail
address.
condition = ${if >{$spam_score_int}{120}{1}{0}}
accept
begin routers
virtual:
driver = redirect
domains = dsearch;/usr/local/etc/exim/virtual
data = ${lookup{$local_part}lsearch{/usr/local/etc/exim/virtual/$domain}}
no_more
dnslookup:
driver = dnslookup
domains = ! +local_domains
transport = remote_smtp
ignore_target_hosts = 0.0.0.0 : 127.0.0.0/8
no_more
system_aliases:
driver = redirect
allow_fail
allow_defer
data = ${lookup{$local_part}lsearch{/etc/aliases}}
user = mailnull
group = mail
file_transport = address_file
pipe_transport = address_pipe
localuser:
driver = accept
check_local_user
transport = local_delivery
cannot_route_message = Unknown user
begin transports
remote_smtp:
driver = smtp
interface = <; ip.of.our.ext.interface
local_delivery:
driver = appendfile
current_directory = /var/mail/
file = /var/mail/$local_part
delivery_date_add
envelope_to_add
return_path_add
group = mail
user = $local_part
mode = 0660
no_mode_fail_narrower
address_pipe:
driver = pipe
return_output
address_file:
driver = appendfile
delivery_date_add
envelope_to_add
return_path_add
address_reply:
driver = autoreply
begin retry
* * F,2h,15m; G,16h,1h,1.5; F,4d,6h
begin rewrite
begin authenticators
----
ps sorry for my english
